Hallo habe gerade einen Rechner aufgesetzt so wie ich es unter 9.1 auch gemacht habe nur unter 9.2 die Platte wurde mit YAST in ein paar Raid1 devices aufgeteilt. die raittab sieht OK aus, das raid1 module wurde geladen und ist 8 mal in gebrauch. ein cat /proc/mdstat zeigt auch keine fehler komisch ist auch das fdisk -l die hda und hdc anzeigt und dann noch md0 bis md7 Disk /dev/md0: 131 MB, 131465216 bytes 2 heads, 4 sectors/track, 32096 cylinders Units = cylinders of 8 * 512 = 4096 bytes Device Boot Start End Blocks Id System Disk /dev/md7: 14.9 GB, 14920515584 bytes 2 heads, 4 sectors/track, 3642704 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md7 doesn't contain a valid partition table Disk /dev/md6: 16.1 GB, 16113205248 bytes 2 heads, 4 sectors/track, 3933888 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md6 doesn't contain a valid partition table Disk /dev/md5: 16.1 GB, 16113205248 bytes 2 heads, 4 sectors/track, 3933888 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md5 doesn't contain a valid partition table Disk /dev/md4: 24.7 GB, 24700387328 bytes 2 heads, 4 sectors/track, 6030368 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md4 doesn't contain a valid partition table Disk /dev/md3: 3224 MB, 3224174592 bytes 2 heads, 4 sectors/track, 787152 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md3 doesn't contain a valid partition table Disk /dev/md2: 3224 MB, 3224174592 bytes 2 heads, 4 sectors/track, 787152 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md2 doesn't contain a valid partition table Disk /dev/md1: 1077 MB, 1077411840 bytes 2 heads, 4 sectors/track, 263040 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md1 doesn't contain a valid partition table doch beim booten kommt <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: considering hdc12 ... <6>md: adding hdc12 ... <4>md: hdc11 has different UUID to hdc12 <4>md: hdc10 has different UUID to hdc12 <4>md: hdc9 has different UUID to hdc12 <4>md: hdc8 has different UUID to hdc12 <4>md: hdc7 has different UUID to hdc12 <4>md: hdc6 has different UUID to hdc12 <4>md: hdc1 has different UUID to hdc12 <6>md: adding hda12 ... <4>md: hda11 has different UUID to hdc12 <4>md: hda10 has different UUID to hdc12 <4>md: hda9 has different UUID to hdc12 <4>md: hda8 has different UUID to hdc12 <4>md: hda7 has different UUID to hdc12 <4>md: hda6 has different UUID to hdc12 <4>md: hda1 has different UUID to hdc12 <6>md: created md7 <6>md: bind<hda12> <6>md: bind<hdc12> <6>md: running: <hdc12><hda12> <4>md: personality 3 is not loaded! <4>md :do_md_run() returned -22 <6>md: md7 stopped. <6>md: unbind<hdc12> <6>md: export_rdev(hdc12) <6>md: unbind<hda12> <6>md: export_rdev(hda12) <6>md: considering hdc11 ... <6>md: adding hdc11 ... <4>md: hdc10 has different UUID to hdc11 <4>md: hdc9 has different UUID to hdc11 <4>md: hdc8 has different UUID to hdc11 <4>md: hdc7 has different UUID to hdc11 <4>md: hdc6 has different UUID to hdc11 . . . <6>usbcore: registered new driver hub <4>md: raidstart(pid 2501) used deprecated START_ARRAY ioctl. This will not be supported beyond 2.6 <3>md: could not bd_claim hda1. <4>md: autostart failed! <4>md: raidstart(pid 2501) used deprecated START_ARRAY ioctl. This will not be supported beyond 2.6 <3>md: could not bd_claim hda6. <4>md: autostart failed! <4>md: raidstart(pid 2501) used deprecated START_ARRAY ioctl. This will not be supported beyond 2.6 <3>md: could not bd_claim hda7. <4>md: autostart failed! <3>md: could not bd_claim hda8. <4>md: autostart failed! <3>md: could not bd_claim hda9. <4>md: autostart failed! <3>md: could not bd_claim hda10. <4>md: autostart failed! <3>md: could not bd_claim hda11. <4>md: autostart failed! <3>md: could not bd_claim hda12. <4>md: autostart failed! <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. . . . . Initializing Multiple Devices... considering /dev/md0... /dev/md0 is not a RAID0 or LINEAR array, skipping. considering /dev/md1... /dev/md1 is not a RAID0 or LINEAR array, skipping. considering /dev/md2... /dev/md2 is not a RAID0 or LINEAR array, skipping. considering /dev/md3... /dev/md3 is not a RAID0 or LINEAR array, skipping. considering /dev/md4... /dev/md4 is not a RAID0 or LINEAR array, skipping. considering /dev/md5... /dev/md5 is not a RAID0 or LINEAR array, skipping. considering /dev/md6... /dev/md6 is not a RAID0 or LINEAR array, skipping. considering /dev/md7... /dev/md7 is not a RAID0 or LINEAR array, skipping. /dev/md0: Invalid argument /dev/md1: Invalid argument /dev/md2: Invalid argument /dev/md3: Invalid argument /dev/md4: Invalid argument /dev/md5: Invalid argument /dev/md6: Invalid argument /dev/md7: Invalid argument Grüße Torsten