Hallo, die Zeit zwischen den Jahren wollte ich für den Wechsel von SUSE 9.0 nach 9.2 nutzen. Ich habe den Weg der kompletten Neuinstallation auf meinem Notebook gewählt, aber vermutlich sorgt dies für die folgenden Probleme. Wie unter SUSE 9.0 wollte ich für den 3D-Betrieb die NVIDIA-Treiber installieren. Also beim Systemstart init 3 eingeben und als root dann eingeben: rmmode NVIDIA (nicht gefunden; richtig, da Neuinstalltion) sh NVIDIA-Linux-x86-1.0-6629-pkg1.run Die Installation scheint zu klappen, aber es gibt folgende Fehlermeldung: ----------------------- WARNING: Your kernel was configured to include rivafb support as a loadable kernel module. The rivafb driver conflicts with the NVIDIA driver; the NVIDIA kernel module will still be built and installed, but be aware that the NVIDIA driver will not be able to function properly if the rivafb module is loaded! -> Cleaning kernel module build directory. executing: 'cd ./usr/src/nv; make clean'... rm -f -f nv.o nv-vm.o os-agp.o os-interface.o os-registry.o nv.o nv-vm.o os- agp.o os-interface.o os-registry.o nvidia.mod.o rm -f -f build-in.o nv-linux.o *.d .*.{cmd,flags} rm -f -f nvidia.{o,ko,mod.{o,c}} nv_compiler.h *~ rm -f -rf .tmp_versions ------------------- Da ich nicht wusste, wie ich die rivafb-Unterstützung entfernen kann, habe ich den Treiber dennoch installiert. -------------------------- The rivafb driver conflicts with the NVIDIA driver; the NVIDIA kernel module will still be built and installed, but be aware that the NVIDIA driver will not be able to function properly if the rivafb module is loaded! *** Failed rivafb module sanity check, but continuing! *** ... -> done. -> Kernel module compilation complete. -> Installing both new and classic TLS OpenGL libraries. -> Installing 'NVIDIA Accelerated Graphics Driver for Linux-x86' (1.0-6629): executing: './usr/src/nv/makedevices.sh'... executing: '/sbin/ldconfig'... executing: '/sbin/depmod -aq'... -> done. -> Driver file installation is complete. -> Running post-install sanity check: -> done. -> Post-install sanity check passed. -> Shared memory test passed. -> Running runtime sanity check: -> done. -> Runtime sanity check passed. -> Installation of the NVIDIA Accelerated Graphics Driver for Linux-x86 (version: 1.0-6629) is now complete. On SuSE Linux/United Linux please use SaX2 now to enable the NVIDIA driver. ---------------------- Die Eingabe von sax2 -m 0=NVIDIA brachte dann leider keinen Erfolg. Die Datei xorg.log zeigt zwar, das der neue Treiber installiert werden konnte, aber keine tauglichen Screens vorfand. Unter SUSE 9.0 hatte ich nie derartige Fehlermeldungen. -------------------- (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.6629 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension GLX (II) LoadModule: "v4l" (II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o (II) Module v4l: vendor="X.Org Foundation" compiled for 6.8.1, module version = 0.0.1 ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "nvidia" (II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.6629 Module class: XFree86 Video Driver (II) LoadModule: "kbd" (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o (II) Module kbd: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16 (==) NVIDIA(0): RGB weight 565 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (--) NVIDIA(0): Linear framebuffer at 0xE0000000 (--) NVIDIA(0): MMIO registers at 0xFC000000 (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! (EE) NVIDIA(0): *** Aborting *** (II) UnloadModule: "nvidia" (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found ... (II) NVIDIA X Driver 1.0-6629 Wed Nov 3 13:14:07 PST 2004 (II) NVIDIA Unified Driver for all NVIDIA GPUs (II) Primary Device is: PCI 01:00:0 (--) Chipset NVIDIA GPU found ... ------------------------------------------------- Mit den Treibern von der CD (von YAST installiert), habe ich KDE am laufen, aber ohne 3D-Unterstützung. Was mache ich falsch? Hier noch ein Auszug aus sax.log nach dem Wiedereinrichtung des nv-Treibers: ------------------------- /************* SaX2 log : SaX2 version 4.8 - CVS Release: 1.49 2003/03/17 ************** CVS BUILD : 26443 : DESCRIPTION : X11 configuration log file to collect information : about detection, startup and configuration. : There are three parts of logging: : --- : 1) INIT ( detection, 3D ) : 2) STARTUP ( XF86Config, X11 log, glxinfo ) : 3) CONFIG ( config actions ) : --- : VERSION : SaX2 compiled for: [SuSE Linux 9.2 (i586)] PARAMETER : no parameter(s) given : LOG DATE : Sat Jan 1 13:28:50 CET 2005 *************/ ============================ Framebuffer Info: ---------------------------- mode "1280x1024-77" # D: 131.096 MHz, H: 80.328 kHz, V: 76.649 Hz geometry 1280 1024 1280 1024 16 timings 7628 160 32 16 4 160 4 rgba 5/11,6/5,5/0,0/0 endmode Frame buffer device information: Name : VESA VGA Address : 0xe0000000 Size : 10485760 Type : PACKED PIXELS Visual : TRUECOLOR XPanStep : 0 YPanStep : 0 YWrapStep : 0 LineLength : 2560 Accelerator : No ... Section "Monitor" DisplaySize 320 240 HorizSync 30-90 Identifier "Monitor[0]" ModelName "1400X1050@75HZ" Option "DPMS" VendorName "--> LCD" VertRefresh 58-78 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 Modeline "1400x1050" 158.07 1400 1496 1648 1896 1050 1051 1054 1097 EndSection Section "Device" BoardName "GeForce2 Go" BusID "1:0:0" Driver "nv" Identifier "Device[0]" #Option "CrtcNumber" "0" VendorName "NVidia" EndSection Section "Screen" DefaultDepth 16 SubSection "Display" Depth 15 Modes "1400x1050" EndSubSection SubSection "Display" Depth 16 Modes "1400x1050" EndSubSection SubSection "Display" Depth 24 Modes "1400x1050" EndSubSection SubSection "Display" Depth 32 Modes "1400x1050" EndSubSection SubSection "Display" Depth 8 Modes "1400x1050" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection ... X Window System Version 6.8.1 Release Date: 17 September 2004 X Protocol Version 11, Revision 0, Release 6.8.1 Build Operating System: SuSE Linux [ELF] SuSE Current Operating System: Linux linuxJB 2.6.8-24.10-default #1 Wed Dec 22 11:54:27 UTC 2004 i686 ... mit diesen Treibern geht es: (II) LoadModule: "v4l" (II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o (II) Module v4l: vendor="X.Org Foundation" compiled for 6.8.1, module version = 0.0.1 ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "nv" (II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o (II) Module nv: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 0.7 ... (II) NV(0): Initializing int10 (II) NV(0): Primary V_BIOS segment is: 0xc000 (--) NV(0): Chipset: "GeForce2 Go" (**) NV(0): Depth 16, (--) framebuffer bpp 16 (==) NV(0): RGB weight 565 (==) NV(0): Default visual is TrueColor (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="X.Org Foundation" compiled for 6.8.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (==) NV(0): Using HW cursor (--) NV(0): Linear framebuffer at 0xE0000000 (--) NV(0): MMIO registers at 0xFC000000 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.2.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) NV(0): I2C bus "DDC" initialized. (II) NV(0): Probing for EDID on I2C bus A... (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) NV(0): I2C device "DDC:ddc2" removed. (II) NV(0): ... none found (II) NV(0): Probing for EDID on I2C bus B... (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) NV(0): I2C device "DDC:ddc2" removed. (II) NV(0): ... none found (--) NV(0): CRTC 1 is currently programmed for DFP (II) NV(0): Using DFP on CRTC 1 (--) NV(0): Panel size is 1400 x 1050 (--) NV(0): VideoRAM: 16384 kBytes (==) NV(0): Using gamma correction (1.0, 1.0, 1.0) (II) NV(0): Monitor[0]: Using hsync range of 30.00-90.00 kHz (II) NV(0): Monitor[0]: Using vrefresh range of 58.00-78.00 Hz (II) NV(0): Clock range: 12.00 to 350.00 MHz ------------------- Ich hoffe, ich habe die wichtigen Teile aus sax.log, Xorg.log und nvidia-installer.log herausgefischt. Vielen Dank für die Mithilfe beim Suchen. Gruß Jens