isdn.1: list dsl.1: list int.2: cdrom int.3: media int.4.1: /dev/sda read_block0: 512 bytes (5s, 0us) int.4: floppy int.5: bios bios ctrl 0: 26 int.6: mouse int.7: hdb int.8: usbscsi int.9: hotplug int.10: modem int.11: wlan int.12: udev ........................................... ----- /proc/modules -----
Hallo, ich habe SUSE LINUX 9.1 und konnte jetzt 2 Monate lang mein FritzCard DSL SL USB ohne Probleme nutzen. Bei der Installation habe ich den Hinweis auf http://portal.suse.com/sdb/de/2004/04/DSL_SL.html beachtet, den ISDN Zugang mittels Yast und danach von dort aus dann DSL installiert (CAPI-DSL). Doch auf einmal klappt der DSL-Zugang nicht mehr. Warum, weiß ich nicht. Es ist auch unheimlich schwer, eine Ursache zu finden, wenn man nicht weiß, wo hier dieentsprechenden Dateien zu finden sind, in denen DSL konfiguriert wird. Wer weiß genaueres über die Konfiguration der FritzCard DSL SL USB unter Suse Linux 9.1 oder kann mir eine URL mit wissenswertem dazu mitteilen?? Ich habe daraufhin alles noch mal neu installiert (erst deinstalliert!), aber es leuchtet permanent nur die USB-Lampe am DSL-Modem. die restlichen Lämpchen weigern sich beharrlich zu leuchten (unter Windows XP funktioniert das Ding noch). Ich habe mal ein Hardwar-Indfo mittels Yast gemacht, und dabei kam folgendes heraus (ich kopiere nur das heaus, was mir nach DSL riecht): ...................... <4>fcdslslusb: unsupported module, tainting kernel. <4>fcdslslusb: module license 'Proprietary' taints kernel. <6>fcdslslusb: Base address: fb2a1380 <6>fcdslslusb: Compile time: 20:07:00 <6>fcdslslusb: AVM FRITZ!Card DSL SL USB driver, revision 0.2 <6>fcdslslusb: (fcdslslusb built on Jun 15 2004 at 20:07:00) <6>fcdslslusb: Loading... <6>fcdslslusb: Probe for device #2, vendor 57c, product 3500. <3>fcdslslusb: Interface already claimed. <6>fcdslslusb: Unknown device! <6>usbcore: registered new driver fcdslslusb <6>fcdslslusb: Loaded. ..................... usb device: name = 3-1:1.0, bus_id = 3-1:1.0, bus = usb path = /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0 bInterfaceNumber = 0 bInterfaceClass = 255 bInterfaceSubClass = 255 bInterfaceProtocol = 255 if: 3-1:1.0 @ /devices/pci0000:00/0000:00:1d.2/usb3/3-1 bDeviceClass = 255 bDeviceSubClass = 255 bDeviceProtocol = 255 idVendor = 0x057c idProduct = 0x3500 product = "USB DSL Device" serial = "00428552" bcdDevice = 0100 speed = "12" ..................... UniqueID=KRJj.kT0309LBrc9 ParentID=uIhY.ANJOAo5RQu6 HWClass=unknown Model=AVM USB DSL Device Configured=no Available=yes Needed=no Active=unknown Bus=0x86 VendorID=u057c DeviceID=3500 DeviceName=USB DSL Device VendorName=AVM GmbH RevisionName=1.00 Serial=00428552 SysfsID=/devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0 SysfsBusID=3-1:1.0 Hotplug=4 HWClassList=00000008000008 Res.Baud=1500000,0,0,0x00,0x00 ........................................ ----- manually configured hardware end ----- parport_pc 41024 0 - Live 0xfab84000 parport 44232 1 parport_pc, Live 0xfab78000 af_packet 26376 0 - Live 0xfab42000 snd_emu10k1 101128 0 - Live 0xfab96000 snd_rawmidi 31140 1 snd_emu10k1, Live 0xfab39000 snd_pcm 112772 1 snd_emu10k1, Live 0xfab5b000 snd_timer 32260 1 snd_pcm, Live 0xfab1a000 snd_seq_device 12808 2 snd_emu10k1,snd_rawmidi, Live 0xfaaf4000 snd_ac97_codec 69636 1 snd_emu10k1, Live 0xfab26000 snd_util_mem 9344 1 snd_emu10k1, Live 0xfaaf0000 snd_hwdep 14596 1 snd_emu10k1, Live 0xfaaeb000 snd 70884 8 snd_emu10k1,snd_rawmidi,snd_pcm,snd_timer,snd_seq_device,snd_ac97_codec,snd_util_mem,snd_hwdep, Live 0xfaafc000 ppp_generic 35732 0 - Live 0xfaadb000 usbserial 35952 0 - Live 0xfb03f000 hid 47552 0 - Live 0xfb000000 edd 13720 0 - Live 0xfae5e000 joydev 14528 0 - Live 0xfae49000 sg 41632 0 - Live 0xfb00d000 st 44828 0 - Live 0xfaef5000 sr_mod 21028 0 - Live 0xfacd0000 fcdslslusb 832512 0 - Live 0xfb23d000 .............................................. 50: USB 00.0: 0000 Unclassified device [Created at usb.118] Unique ID: KRJj.kT0309LBrc9 Parent ID: uIhY.ANJOAo5RQu6 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0 SysFS BusID: 3-1:1.0 Hardware Class: unknown Model: "AVM USB DSL Device" Hotplug: USB Vendor: usb 0x057c "AVM GmbH" Device: usb 0x3500 "USB DSL Device" Revision: "1.00" Serial ID: "00428552" Speed: 1.5 Mbps Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #49 (Hub) .................................................. meldungen aus der /var/log/messages. Jun 30 20:18:19 fellgiebel kernel: fcdslslusb: unsupported module, tainting kernel. Jun 30 20:18:19 fellgiebel kernel: fcdslslusb: module license 'Proprietary' taints kernel. Jun 30 20:18:19 fellgiebel kernel: fcdslslusb: Base address: fb2a1380 Jun 30 20:18:19 fellgiebel kernel: fcdslslusb: Compile time: 20:07:00 Jun 30 20:18:19 fellgiebel kernel: fcdslslusb: AVM FRITZ!Card DSL SL USB driver, revision 0.2 Jun 30 20:18:19 fellgiebel kernel: fcdslslusb: (fcdslslusb built on Jun 15 2004 at 20:07:00) Jun 30 20:18:19 fellgiebel kernel: fcdslslusb: Loading... Jun 30 20:18:19 fellgiebel kernel: fcdslslusb: Probe for device #2, vendor 57c, product 3500. Jun 30 20:18:19 fellgiebel kernel: fcdslslusb: Interface already claimed. Jun 30 20:18:19 fellgiebel kernel: fcdslslusb: Unknown device! Jun 30 20:18:19 fellgiebel kernel: usbcore: registered new driver fcdslslusb Jun 30 20:18:19 fellgiebel kernel: fcdslslusb: Loaded. ............... Jun 30 20:21:06 fellgiebel kernel: ippp_ccp: freeing reset data structure f7048000 Jun 30 20:21:06 fellgiebel kernel: isdn_free_channel: called with invalid drv(-1) or channel(-1) Jun 30 20:21:06 fellgiebel kdm: :0[6314]: pam_unix2: session finished for user cw, service xdm-np Jun 30 20:21:17 fellgiebel kdm: :0[7530]: pam_unix2: session started for user root, service xdm Jun 30 20:22:48 fellgiebel pppd[7766]: Plugin capiplugin.so loaded. Jun 30 20:22:48 fellgiebel pppd[7766]: capiplugin: $Revision: 1.33 $ Jun 30 20:22:48 fellgiebel pppd[7766]: capiconn: 1.8 Jun 30 20:22:48 fellgiebel pppd[7766]: Plugin passwordfd.so loaded. Jun 30 20:22:48 fellgiebel kernel: PPP generic driver version 2.4.2 Jun 30 20:22:48 fellgiebel pppd[7766]: pppd 2.4.2 started by root, uid 0 Jun 30 20:22:48 fellgiebel pppd[7766]: capiplugin: phase serialconn. Jun 30 20:22:48 fellgiebel pppd[7766]: using default adsl parameters Jun 30 20:22:48 fellgiebel pppd[7766]: capiplugin: contr=2 Jun 30 20:22:48 fellgiebel pppd[7766]: controller 2: listen_change_state 0 -> 1 Jun 30 20:22:48 fellgiebel pppd[7766]: contr 2: listenconf Info=0x2002 (Illegal Controller / PLCI / NCCI) infomask=0x145 cipmask=0x0 capimask2=0x0 Jun 30 20:22:48 fellgiebel pppd[7766]: controller 2: listen_change_state 1 -> 0 Jun 30 20:22:48 fellgiebel pppd[7766]: plci_change_state:0x0 0 -> 1 event=1 Jun 30 20:22:48 fellgiebel pppd[7766]: capiplugin: leased line (adslpppoe) Jun 30 20:22:48 fellgiebel pppd[7766]: got CONNECT_CONF from controller 0x2 ??? Jun 30 20:23:10 fellgiebel pppd[7766]: Terminating on signal 15.