Hallo,
Am Sam 15.11.03 um 22:05 CET schrieb Thomas Preissler
Hallo Stefan,
* Stefan schrieb am 15.11.2003:
Am Don 13.11.03 um 21:26 CET schrieb Thomas Preissler
:[... lircd startet nicht ...] /dev/lircd muss 777 (bitte nicht steinigen) haben. Und Module brauchst Du auf dem Client (Rechner B) keine.
Auch ein chmod 777 /dev/lirc* hilft nicht :-(
/====== |lise:/export/home/matthias # lircd -n --connect=natis:6666 |lircd 0.6.6: lircd(any) |ready lircd 0.6.6: connected to natis |lircd 0.6.6: accepted new client on /dev/lircd (irexec wurde gestartet) |lircd 0.6.6: could not open /dev/lirc |lircd 0.6.6:default_init(): No such device
Dann gibts wohl ein Problem mit lirc_sir. Existiert /dev/lircd? Wenn, nein, lege es mal an.
lirc_sir? Das Modul habe ich nicht geladen (als auf Rechner A schon). Ich denke das brauche ich nicht. Es läßt sich auch nicht ohne weiteres laden vermutl. weil der Rechner auch kein IR-Device hat. /dev/lirc existiert: lise:/export/home/matthias # ls -l /dev/lirc* crwxrwxrwx 1 root root 61, 0 2003-03-17 14:55 /dev/lirc srwxrwxrwx 1 root video 0 2003-11-16 21:14 /dev/lircd prwxrwxrwx 1 root root 0 2003-03-17 14:54 /dev/lircm ls -l /dev/lirc* gibt auf beiden Rechnern das gleiche Ergebnis. mfg stefan