Hallo zusammen, auf meinem Rechen Suse 8.2 KDE 3.1.1, kann ich k3b 0.8.1 nur als root nutzen :-( Als root werden auch das DVD Laufwerk LITEON und mein Brenne von LG durch k3b zwei Mal erkannt? als DVD Laufwerk: /dev/scd1(1,0,1), sr1(1,0,0), Brenner: /dev/scd3(1,1,1), scd2(1,1,0) An den Datei /etc/fstab und /boot/grub/manu.lst habe ich paar Verändrungen vorgenomen, so sah die fstab direkt nach der installetion aus: /dev/hda16 / ext2 defaults 1 1 /dev/hda13 /data1 auto noauto,user 0 0 /dev/hda14 /home ext2 defaults 1 2 /dev/hda15 swap swap pri=42 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0 proc /proc proc defaults 0 0 /dev/cdrecorder /media/cdrecorder auto ro,noauto,user,exec 0 0 /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0 /dev/dvd /media/dvd auto ro,noauto,user,exec 0 0 /dev/fd0 /media/floppy auto noauto,user,sync 0 0 menu.lst: Modified by YaST2. Last modification on Sat Jun 14 23:31:37 2003 color white/blue black/light-gray default 0 gfxmenu (hd0,15)/boot/message timeout 8 title Suse 8.2 kernel (hd0,15)/boot/vmlinuz root=/dev/hda16 vga=0x31a hdc=ide-scsi hdclun=0 splash=silent showopts initrd (hd0,15)/boot/initrd title windows root (hd0,0) chainloader +1 title floppy root (fd0) chainloader +1 title failsafe kernel (hd0,15)/boot/vmlinuz.shipped root=/dev/hda16 showopts ide=nodma apm=off acpi=off vga=normal nosmp noapic maxc pus=0 3 initrd (hd0,15)/boot/initrd.shipped In die Datei fstab habe ich folgende Einträgen hinzugefühgt die vorherigen natürlich auskommentiert also jetzt sieht sie so aus: /dev/hda16 / ext2 defaults 1 1 /dev/hda13 /data1 auto noauto,user 0 0 /dev/hda14 /home ext2 defaults 1 2 /dev/hda15 swap swap pri=42 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0 proc /proc proc defaults 0 0 #/dev/cdrecorder /media/cdrecorder auto ro,noauto,user,exec 0 0 #/dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0 #/dev/dvd /media/dvd auto ro,noauto,user,exec 0 0 /dev/fd0 /media/floppy auto noauto,user,sync 0 0 /dev/scd1 /media/cdrecorder auto ro,noauto,user,exec 0 0 /dev/scd0 /media/cdrom auto ro,noauto,user,exec 0 0 Die Datei menu.lst habe ich so ergenzt: #kernel (hd0,15)/boot/vmlinuz root=/dev/hda16 vga=0x31a hdc=ide-scsi hdclun=0 splash=silent showopts #initrd (hd0,15)/boot/initrd kernel (hd0,15)/boot/vmlinuz root=/dev/hda16 vga=0x31a hdc=ide-scsi hdclun=0 hdb=ide-scsi hdblun=1 splash=silent showopts initrd (hd0,15)/boot/initrd cdrecord -scanbus Cdrecord 2.0 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling Linux sg driver version: 3.1.24 Using libscg version 'schily-0.7' cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.75-resmgr-patch '@( #)scsi-linux-sg.c 1.75 02/10/21 Copyright 1997 J. Schilling'). scsibus1: 1,0,0 100) 'LITEON ' 'DVD-ROM LTD122 ' 'IL4L' Removable CD-ROM 1,1,0 101) 'HL-DT-ST' 'RW/DVD GCC-4480B' '1.00' Removable CD-ROM 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * Nach der installaltion wurde der Brenner beim User nur erkannt. Jetzt wird nur der DVD Laufwerk von b3k erkannt. Wie kann ich den Brenner und und das DVD Laufwerk mit k3b nutzten? Danke im Voraus. Grüße Bernhard