Hallo,
ich habe mithilfe der Anleitung von www.adsl4linux.de meinen DSL-Account
(1und1 Internet AG) konfiguriert.
Modem: AVM FRITZ!DSL PCI (ohne Netzwerkkarte)
Meine Konfig-Datei sieht wie folgt aus:
# Verbindung zu T-DSL über die Fritz!Card DSL
debug
sync
noauth
defaultroute
lcp-echo-interval 5
lcp-echo-failure 3
lcp-max-configure 50
lcp-max-terminate 2
noccp
noipx
# persist
# demand
connect ""
# mru 1490
mtu 1490
ipcp-accept-local
ipcp-accept-remote
#
#
#
plugin userpass.so
#
# Anschlußkennung T-Online-Nummer Mitbenutzerkennung
# \ | /
user 1und1/1671-295@online.de
password *************
linkname t-dsl
ipparam internet
plugin capiplugin.so
avmadsl
:
/dev/null
Wenn ich jetzt "pppd call t-dsl" eingebe, erhalte ich folgende Meldung:
linux:~ # pppd call t-dsl
Plugin userpass.so loaded.
userpass: $Revision: 1.3 $
Plugin capiplugin.so loaded.
capiplugin: $Revision: 1.27 $
capiconn: 1.7
capiplugin: phase serialconn.
using default adsl parameters
capiplugin: contr=2
controller 2: listen_change_state 0 -> 1
contr 2: listenconf Info=0x0000 (No additional information) infomask=0x144
cipma
sk=0x0 capimask2=0x0
controller 2: listen_change_state 1 -> 0
plci_change_state:0x0 0 -> 1 event=1
capiplugin: leased line (adslpppoe)
plci_change_state:0x102 1 -> 2 event=3
plci_change_state:0x102 2 -> 3 event=6
ncci_change_state:0x102 0 -> 1 event=1
ncci_change_state:0x10102 1 -> 3 event=3
ncci_change_state:0x10102 3 -> 4 event=7
ncci 0x10102 up
capiplugin: connected: "" -> "" outgoing (pcli=0x102/ncci=0x10102)
capiplugin: using /dev/capi/0: "" -> "" outgoing (pcli=0x102/ncci=0x10102)
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/capi/0
capiplugin: phase establish (was serialconn).
rcvd [LCP ConfReq id=0x6c ]
sent [LCP ConfReq id=0x1 <pcomp> ccomp>]
sent [LCP ConfAck id=0x6c ]
rcvd [LCP ConfAck id=0x1 <pcomp> ccomp>]
sent [LCP EchoReq id=0x0 magic=0x9a66affe]
cbcp_lowerup
want: 2
capiplugin: phase authenticate (was establish).
sent [PAP AuthReq id=0x1 user="1und1/1671-295@online.de" password=<hidden>]
rcvd [LCP EchoRep id=0x0 magic=0x2ff638ac]
rcvd [PAP AuthAck id=0x1 ""]
capiplugin: phase network (was authenticate).
sent [IPCP ConfReq id=0x1 ]
rcvd [IPCP ConfReq id=0x1e ]
sent [IPCP ConfAck id=0x1e ]
rcvd [IPCP ConfRej id=0x1 ]
sent [IPCP ConfReq id=0x2 ]
rcvd [IPCP ConfNak id=0x2 ]
sent [IPCP ConfReq id=0x3 ]
rcvd [IPCP ConfAck id=0x3 ]
local IP address 217.230.226.70
remote IP address 217.5.98.86
capiplugin: phase running (was network).
Script /etc/ppp/ip-up started (pid 1585)
Script /etc/ppp/ip-up finished (pid 1585), status = 0x0
sent [LCP EchoReq id=0x1 magic=0x9a66affe]
rcvd [LCP EchoRep id=0x1 magic=0x2ff638ac]
sent [LCP EchoReq id=0x2 magic=0x9a66affe]
rcvd [LCP EchoRep id=0x2 magic=0x2ff638ac]
sent [LCP EchoReq id=0x3 magic=0x9a66affe]
rcvd [LCP EchoRep id=0x3 magic=0x2ff638ac]
sent [LCP EchoReq id=0x4 magic=0x9a66affe]
rcvd [LCP EchoRep id=0x4 magic=0x2ff638ac]
sent [LCP EchoReq id=0x5 magic=0x9a66affe]
rcvd [LCP EchoRep id=0x5 magic=0x2ff638ac]
sent [LCP EchoReq id=0x6 magic=0x9a66affe]
rcvd [LCP EchoRep id=0x6 magic=0x2ff638ac]
sent [LCP EchoReq id=0x7 magic=0x9a66affe]
rcvd [LCP EchoRep id=0x7 magic=0x2ff638ac]
sent [LCP EchoReq id=0x8 magic=0x9a66affe]
rcvd [LCP EchoRep id=0x8 magic=0x2ff638ac]
sent [LCP EchoReq id=0x9 magic=0x9a66affe]
rcvd [LCP EchoRep id=0x9 magic=0x2ff638ac]
sent [LCP EchoReq id=0xa magic=0x9a66affe]
rcvd [LCP EchoRep id=0xa magic=0x2ff638ac]
sent [LCP EchoReq id=0xb magic=0x9a66affe]
rcvd [LCP EchoRep id=0xb magic=0x2ff638ac]
sent [LCP EchoReq id=0xc magic=0x9a66affe]
rcvd [LCP EchoRep id=0xc magic=0x2ff638ac]
sent [LCP EchoReq id=0xd magic=0x9a66affe]
rcvd [LCP EchoRep id=0xd magic=0x2ff638ac]
sent [LCP EchoReq id=0xe magic=0x9a66affe]
rcvd [LCP EchoRep id=0xe magic=0x2ff638ac]
sent [LCP EchoReq id=0xf magic=0x9a66affe]
rcvd [LCP EchoRep id=0xf magic=0x2ff638ac]
Leider wird mir aber keine Webseite angezeigt (Konqueror, Netscape, usw).
Ein Anruf bei meinem Provider half mir leider auch nicht viel weiter (kein
Support für Linux), außer das sie mir sagten das laut Logfiles ich aber im
Internet sei.
Kann mir jemand helfen?
Grüße
Christian
