Hallo Ich kann mit der 8.0 nicht mehr brennen ! Manufacturer: Multi Media Masters & Machinary SA Blocks total: 335100 Blocks current: 335100 Blocks remaining: 328442 Starting to write CD/DVD at speed 4 in write mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... cdrecord: Input/output error. send opc: scsi sendcmd: no error CDB: 54 01 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 03 00 00 00 00 13 00 00 00 00 73 03 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 33.308s timeout 60s cdrecord: OPC failed. cdrecord: fifo had 64 puts and 0 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. Das ides-scsi module ist geladen (hdd=ide-scsi ist auch in der lilo.conf) Grüße Torsten