Hallo,
ich versuche hier mit einem SuSE 7.2, T-DSL und rp-pppoe zum laufen zu
bekommen.
Leider vergeblich ;-(
Irgendwie scheint die Einwahl nicht zu funktionieren.
Auf einer Windoose klappt alles einwandfrei, von daher sollte der Fehler in
der Linux-Config zu suchen sein.
Kann jemand vielleicht hiermit etwas anfangen?
TIA, Markus
gate1:~ # pppoe -I eth1 -A
--------------------------------------------------
Access-Concentrator: BERC26-nrp6
Got a cookie: e6 0a 8c 81 27 1d fa 7a 15 48 b6 45 f9 f2 d0 6e
AC-Ethernet-Address: 00:30:80:27:52:43
--------------------------------------------------
##################
gate1:~ # pppd pty "/usr/sbin/pppoe -I eth1"
Serial connection established.
using channel 5
Using interface ppp0
Connect: ppp0 <--> /dev/pts/3
sent [LCP ConfReq id=0x1 ]
rcvd [LCP ConfReq id=0xdc <auth pap> ]
sent [LCP ConfRej id=0xdc <auth pap>]
rcvd [LCP ConfAck id=0x1 ]
rcvd [LCP ConfReq id=0xdd <auth chap MD5> ]
sent [LCP ConfRej id=0xdd <auth chap MD5>]
rcvd [LCP ConfReq id=0xde <auth pap> ]
sent [LCP ConfRej id=0xde <auth pap>]
rcvd [LCP ConfReq id=0xdf <auth chap MD5> ]
sent [LCP ConfRej id=0xdf <auth chap MD5>]
rcvd [LCP ConfReq id=0xe0 <auth pap> ]
sent [LCP ConfRej id=0xe0 <auth pap>]
rcvd [LCP ConfReq id=0xe1 <auth chap MD5> ]
sent [LCP ConfRej id=0xe1 <auth chap MD5>]
rcvd [LCP ConfReq id=0xe2 <auth pap> ]
sent [LCP ConfRej id=0xe2 <auth pap>]
rcvd [LCP ConfReq id=0xe3 <auth chap MD5> ]
sent [LCP ConfRej id=0xe3 <auth chap MD5>]
rcvd [LCP ConfReq id=0xe4 <auth pap> ]
sent [LCP ConfRej id=0xe4 <auth pap>]
rcvd [LCP ConfReq id=0xe5 <auth chap MD5> ]
sent [LCP ConfRej id=0xe5 <auth chap MD5>]
rcvd [LCP ConfReq id=0xe6 <auth pap> ]
sent [LCP ConfRej id=0xe6 <auth pap>]
rcvd [LCP TermReq id=0xe7]
sent [LCP TermAck id=0xe7]
Modem hangup
Connection terminated.
Script /usr/sbin/pppoe -I eth1 finished (pid 1261), status = 0x0
