Am Donnerstag, 8. November 2001 20:21 schrieb Dr. Hans Ulrich Rilling:
ich habe den Mustek (600 II CD) an den Adaptec angeschlossen.
Starte ich nun xsane, bekomme ich die Meldung "no device available"
Waran koennte dies nun liegen?
in /etc/sane.d/mustek.conf Zeile
/dev/sgx #/dev/scanner ändern in:
/dev/sgx /dev/scanner
# See sane-mustek(5) for documentation. #--------------------------- Global options --------------------------------- option strip-height 1 # some SCSI adapters need this; scanning may # be faster without this option #option force-wait # wait for scanner to be ready (only necessary # when scanner freezes) #-------------------------- SCSI scanners ----------------------------------- scsi MUSTEK * Scanner # option linedistance-fix # stripes may go away in color mode # option buffersize 1024 # set non standard buffer size (in kb) # option blocksize 2048 # set non standard block size (in kb) option lineart-fix # lineart may be faster with this option off. scsi SCANNER # option linedistance-fix # stripes may go away in color mode # option buffersize 1024 # set non standard buffer size (in kb) # option blocksize 2048 # set non standard block size (in kb) option lineart-fix # lineart may be faster with this option off. /dev/scanner # option linedistance-fix # stripes may go away in color mode # option buffersize 1024 # set non standard buffer size (in kb) # option blocksize 2048 # set non standard block size (in kb) option lineart-fix # lineart may be faster with this option off. #-------------------------- 600 II N ---------------------------------------- #0x2eb # For the 600 II N try one of 0x26b, 0x2ab, # 0x2eb, 0x22b, 0x32b, 0x36b, 0x3ab, 0x3eb. # option linedistance-fix # only neccessary with firmware 2.x In der Form finde ich gar keinen Eintrag. Ich habe auch gerade mal unter /dev nachgeschaut, /dev/scanner gibt es da auch noch nicht. Enrico