Hallo Thorsten,
ich hab Probleme mit dem Kernel 2.4.0 (gleiches aber auch mit Kernel 2.4.1 und 2.4.2). Die Firewall regeln werden nicht gesetzt beim booten, weil er erst die Firewall initialisieren will und danach erst ippp0 und eth0 - hier das Boot-log
guck mal: firewall.rc.config lesen bildet... ;-) -----snip-----snap----------snip-----snap----------snip-----snap----- # You *may* configure a static IP and netmask to force rule loading even # if the # interface is not up and running: set a variable called # FW_DEV_WORLD_[device]="IP_ADDRESS NETMASK" # see below for an example. Otherwise automatic detection is done. # You will still need to set FW_DEV_WORLD first! # #FW_DEV_WORLD_ippp0="10.0.0.1 255.255.255.0" # e.g. for exernal interface ippp0 -----snip-----snap----------snip-----snap----------snip-----snap----- Das ist genau das, was Du willst. Selbiges gibt's auch für das interne Netz (FW_DEV_INT_eth0). Bye Michael -- Dipl.-Inf. Michael Kaaden MID GmbH Fon +49-911-96836-62 Software Engineer R&D Eibacher Hauptstr. 141 Fax +49-911-96836-10 E-Mail m.kaaden@mid.de D-90451 Nuernberg WWW http://www.mid.de "Linux is for networking, Mac is for working, Windows is for Solitaire." -- anon.