Hallo liebe Leute, ich habe ein Problem mit dem Start der Firewall seit dem Update von SuSE 7.0 auf 7.1. Im Anschluß poste ich einen Auszug aus der /var/log/boot.msg. Die Konfiguration war voerst mir yast1 gemacht. Die dort gemachten Einstellungen scheinen nach dem Update auch korrekt übernommen worden zu sein. Was ich nicht verstehe ist, daß die Firewall offenbar eine Initialisierung durchführt, obwohl noch keine Netzwerk-Devices initialisiert sind. Die Firewall scheint dennoch zu funktionieren. Ein Portscan von außerhalb ergab, daß ich tatsächlich nur auf den ssh Port 22 kam, wie vorgesehe. Dennoch beunruhigt mich die Sache, vor allem weil ich seit dem Update ständig irgendwelche Probleme mit der DNS-Namensauflösung habe. Und last but not least: Kann jemand mit der Fehlermeldung des pppoed etwas anfang, die in der boot.msg steht? Vielen Dank vorab. Christoph ***** Creating /var/log/boot.msg done Enabling dynamic IP patch done Enabling syn flood protection done Disabling IP forwarding done INIT: Entering runlevel: 5 Boot logging started at Tue Feb 13 19:26:34 2001 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Starting Firewall Initialization: (phase 1 of 3) (run 2 of 3) Warning: interface eth0 is not active. modprobe: modprobe: Can't locate module ippp1 modprobe: modprobe: Can't locate module ippp1 modprobe: modprobe: Can't locate module ippp0 modprobe: modprobe: Can't locate module ippp0 No interfaces active! exiting ... SuSEfirewall: clearing rules now ... done failed Loading ISDN drivers ... Loading HiSax driver ... /sbin/insmod /lib/modules/2.2.18/misc/isdn.o Using /lib/modules/2.2.18/misc/isdn.o Symbol version prefix '' /sbin/insmod /lib/modules/2.2.18/misc/hisax.o type=27 irq=5 mem=0xd0000 protocol=2 id=HiSax Using /lib/modules/2.2.18/misc/hisax.o Starting isdnlog with /etc/isdn/isdnlog.isdnctrl0.options for isdnctrl0... Initializing random number generator done Verbose-level set to 3. Starting isdn4linux on device ippp0 ippp0 added EAZ/MSN for ippp0 is 25 Layer-2-Protocol for ippp0 is hdlc Layer-3-Protocol for ippp0 is trans Encapsulation for ippp0 is syncppp Security for ippp0 is on Hangup-Timeout for ippp0 is 180 sec. Charge-Hangup for ippp0 is off Incoming-Hangup for ippp0 is off Dialmax for ippp0 is 2 times. Callback for ippp0 is off Callback delay for ippp0 is 2 sec. Reject before Callback for ippp0 is on Setting up network device ippp0 Starting ippp-daemon for ISDN device ippp0 with /etc/ppp/options.ippp0 done ippp0 bound to 0 Starting isdn4linux on device ippp1 ippp1 added EAZ/MSN for ippp1 is 25 Layer-2-Protocol for ippp1 is hdlc Layer-3-Protocol for ippp1 is trans Encapsulation for ippp1 is syncppp Security for ippp1 is off Hangup-Timeout for ippp1 is 180 sec. Charge-Hangup for ippp1 is off Incoming-Hangup for ippp1 is off Dialmax for ippp1 is 2 times. Callback for ippp1 is off Callback delay for ippp1 is 2 sec. Reject before Callback for ippp1 is on Setting up network device ippp1 Starting ippp-daemon for ISDN device ippp1 with /etc/ppp/options.ippp1 done ippp1 bound to 1 Setting up network device eth0 done Setting up network device eth1 done Starting pppoed: Plugin /usr/lib/passwordfd.so loaded. modprobe: modprobe: Can't locate module char-major-108 Using interface ppp0 local IP address 192.168.0.7 remote IP address 10.112.112.112 done Setting up routing (using /etc/route.conf) done Starting Firewall Initialization: (phase 2 of 3) Starting RPC portmap daemon done Starting SSH daemon done Starting syslog services done Starting service automounter done Starting service usbmgr done Starting service at daemon: done Starting identd done Loading keymap qwertz/de-lat1-nd.map.gz done Loading compose table winkeys shiftctrl latin1.add done Starting name server. done Starting kernel based NFS server done Starting mail service (Postfix) done Starting SMB services: done Starting service kdm done Starting lpd done Starting CRON daemon done Starting inetd done Starting Firewall Initialization: (phase 3 of 3) Starting httpd [ ] done Starting Webmin server in /usr/local/lib/webmin-0.84 Master Resource Control: runlevel 5 has been reached Failed services in runlevel 5: SuSEfirewall_init SuSEfirewall_setup SuSEfirewall_final