versuchs mal mit dem prog squid (notfalls nachinstallieren). die doku für squid.conf findest du hier. /usr/doc/packages/squid2 http://www.squid-cache.org/ mfg Robert -----Ursprüngliche Nachricht----- Von: Carsten [mailto:albertros69@gmx.de] Gesendet: Samstag, 1. Juli 2000 22:49 An: suse-linux@suse.de Betreff: Linux als ISDN-Router Hallo zusammen, kann mir jemand den entscheidenen Tip geben, damit auch ein Win98-Client in meinem kleinen Netzwerk über den Linux-ISDN-Router ins Internet gelangt ? Vom Linux-Rechner selbst ( SuSE 6.2) funktioniert die Einwahl über ippp0 zum Provider ohne Probleme. Der Win98-Client hat die IP 192.168.0.3, Gateway 192.168.0.4 ( die IP des Linux-Routers). Weiterhin sind in den Dateien route.conf und rc.config folgende Einträge gemacht: route.conf: 1.1.1.1 0.0.0.0 255.255.255.255 ippp0 192.168.0.0 0.0.0.0 255.255.255.0 eth0 default 1.1.1.1 rc.config: NETCONFIG="_0 _1" IPADDR_0="192.168.0.4" IPADDR_1="1.1.1.1" NETDEV_0="eth0" NETDEV_1="ippp0" IFCONFIG_0="192.168.0.4 broadcast 192.168.0.255 netmask 255.255.255.0 up" IFCONFIG_1="1.1.1.1 pointopoint 1.1.1.1 up" IFCONFIG_2=" broadcast 0.0.0.255 netmask 255.255.255.0 up" # MSQ_START="yes" MSQ_DEV="ippp0" MSQ_NETWORKS="192.168.0.0/24" MSQ_MODULES="ip_mask_ftp" # Mit dem Befehl ifconfig erhalte ich diese Informationen: eth0 Link encap:Ethernet HWaddr 00:80:48:EE:E1:C1 inet addr:192.168.0.4 Bcast:192.168.0.255 Mask:255.255.255.0 ippp0 Link encap:Point-to-Point Protocol inet addr:1.1.1.1 P-t-P:1.1.1.1 Mask:255.255.255.255 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 Als letztes wäre da noch das Ergebnis von ipchains -L: Chain input (policy ACCEPT): target prot opt source destination ports user_fw all ------ anywhere 192.168.0.0/24 n/a Chain forward (policy ACCEPT): target prot opt source destination ports user_msq all ------ 192.168.0.0/24 anywhere n/a Chain output (policy ACCEPT): Chain user_fw (1 references): target prot opt source destination ports DENY all ----l- 192.168.0.0/24 anywhere n/a DENY udp ----l- anywhere anywhere any -> 1:1023 DENY tcp ----l- anywhere anywhere any -> tcpmux:1023 ACCEPT all ------ anywhere anywhere n/a Chain user_msq (1 references): target prot opt source destination ports MASQ all ------ anywhere anywhere n/a Danke schonmal im voraus für Eure Hilfe Carsten --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com