Moin, Leute!
Ich habe T-ISDNdsl und pppoed 0.42 installiert, wie in der SDB beschrieben,
leider kriege ich keine Verbindung, kann mir jemand mit mehr Erfahrung folgende
Ausgabe von pppoed -D -d9 erklaeren?
Vielen Dank im Voraus,
Euer Kaj
root@bravo:/home/kmb > /usr/sbin/pppoed -D -d 9 -I eth1
ppp_connect: total retries to go 0
send_packet: ifn eth1 Ether hdr: dst=ff:ff:ff:ff:ff:ff src=ff:ff:48:fc:f2:8d pro
to=0x8863 (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x09 session=0x0000
length=0x0004 (PADI) PPPoE tag: type=0101 length=0000 (Service name)
send_packet: ifn eth1 Ether hdr: dst=00:b0:64:95:5c:3b src=ff:ff:48:fc:f2:8d pro
to=0x8863 (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x19 session=0x0000
length=0x0027 (PADR) PPPoE tag: type=0101 length=0000 (Service name) PPPoE tag:
type=0102 leng
Discovery completed successfully (session ID=2646 [0xa56], AC MAC=00:b0:64:95:5c
:3b)
cntrl: SessionID (560a)
starting /usr/sbin/pppd to interface pppox0
PPP started pid is: 431
Using interface ppp0
Connect: ppp0 <--> /dev/pppox0
sent [LCP ConfReq id=0x1 ]
rcvd [LCP ConfNak id=0x1 ]
sent [LCP ConfReq id=0x2 ]
rcvd [LCP ConfAck id=0x2 ]
rcvd [LCP ConfReq id=0x16 <auth pap> ]
sent [LCP ConfRej id=0x16 <auth pap>]
rcvd [LCP ConfReq id=0x17 <auth pap> ]
sent [LCP ConfRej id=0x17 <auth pap>]
rcvd [LCP ConfReq id=0x18 <auth pap> ]
sent [LCP ConfRej id=0x18 <auth pap>]
rcvd [LCP ConfReq id=0x19 <auth pap> ]
sent [LCP ConfRej id=0x19 <auth pap>]
rcvd [LCP ConfReq id=0x1a <auth pap> ]
sent [LCP ConfRej id=0x1a <auth pap>]
rcvd [LCP TermReq id=0x1b]
sent [LCP TermAck id=0x1b]
rcvd [LCP ConfReq id=0x1c <auth pap> ]
sent [LCP ConfRej id=0x1c <auth pap>]
sent [LCP ConfReq id=0x2 ]
sent [LCP ConfReq id=0x2 ]
sent [LCP ConfReq id=0x2 ]
sent [LCP ConfReq id=0x2 ]
sent [LCP ConfReq id=0x2 ]
sent [LCP ConfReq id=0x2 ]
sent [LCP ConfReq id=0x2 ]
sent [LCP ConfReq id=0x2 ]
sent [LCP ConfReq id=0x2 ]
sent [LCP ConfReq id=0x2 ]
LCP: timeout sending Config-Requests
Connection terminated.
Child received signal 17 PID 431, status 2560
Line id which died is: 0
OK we got killed
---------------------------------------------------------------------
To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com
For additional commands, e-mail: suse-linux-help@suse.com
