security/autossh -> openSUSE:Factory:Contrib/autossh
https://build.opensuse.org/request/show/113948
Description: new package
changes files:
--------------
++++++ new changes file:
--- autossh.changes
+++ autossh.changes
@@ -0,0 +1,22 @@
+-------------------------------------------------------------------
+Mon Apr 16 07:31:56 UTC 2012 - cfarrell@suse.com
+
+- license update: BSD-3-Clause
+ See fakepoll.h (BSD-4-Clause with UCB clarification). There is no GPL in
+ this package
+
+-------------------------------------------------------------------
+Fri Apr 6 14:14:05 UTC 2012 - multyrealm@gmail.com
+
+- added insserv_cleanup macro
+
+-------------------------------------------------------------------
+Fri Apr 6 13:44:24 UTC 2012 - multyrealm@gmail.com
+
+- added SysV-style initscript and configuration file fillup template
+
+-------------------------------------------------------------------
+Thu Apr 5 16:59:11 UTC 2012 - meissner@suse.com
+
+- a ssh connection watch daemon
+
old:
----
autossh-1.4b.tar.bz2
new:
----
autossh-1.4c.tar.bz2
autossh.changes
autossh.conf
autossh.init
spec files:
-----------
--- autossh.spec
+++ autossh.spec
@@ -1,25 +1,42 @@
#
-# This file and all modifications and additions to the pristine
-# package are under the same license as the package itself.
+# spec file for package autossh
+#
+# Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany.
+#
+# All modifications and additions to the file contributed by third parties
+# remain the property of their copyright owners, unless otherwise agreed
+# upon. The license for this file, and modifications and additions to the
+# file, is the same license as for the pristine package itself (unless the
+# license for the pristine package is not an Open Source License, in which
+# case the license is the MIT License). An "Open Source License" is a
+# license that conforms to the Open Source Definition (Version 1.9)
+# published by the Open Source Initiative.
+
+# Please submit bugfixes or comments via http://bugs.opensuse.org/
#
# norootforbuild
+
Summary: Automatically restart SSH sessions and tunnels
+
Name: autossh
-Version: 1.4b
+Version: 1.4c
Release: 1
-License: GNU General Public License version 2 (GPL v2)
+License: BSD-3-Clause
Group: Productivity/Networking/SSH
-URL: http://www.harding.motd.ca/autossh/
+Url: http://www.harding.motd.ca/autossh/
# http://www.harding.motd.ca/autossh/autossh-%{version}.tgz
-Source: autossh-1.4b.tar.bz2
+Source: http://www.harding.motd.ca/autossh/autossh-1.4c.tar.bz2
+Source1: autossh.init
+Source2: autossh.conf
Patch0: autossh-makefile-destdir.patch
-BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
+BuildRoot: %{_tmppath}/%{name}-%{version}-build
# configure checks is the ssh client exists
BuildRequires: openssh
Requires: openssh
+Requires(pre): %insserv_prereq %fillup_prereq
%description
Autossh is a program to start a copy of ssh and monitor it, restarting
@@ -40,53 +57,30 @@
%install
%makeinstall
+%__install -D -m 755 %{S:1} %{buildroot}%{_initrddir}/autossh
+%__mkdir_p %{buildroot}%{_sbindir}
+%__ln_s -f %{_initrddir}/autossh %{buildroot}%{_sbindir}/rcautossh
+%__install -D -m 644 %{S:2} %{buildroot}/var/adm/fillup-templates/sysconfig.autossh
%__rm "$RPM_BUILD_ROOT/usr/share/doc/autossh"/{CHANGES,README}
%__rm -rf "%{buildroot}%{_datadir}/examples"
%clean
%__rm -rf "%{buildroot}"
+%post
+%fillup_only
+
+%postun
+%insserv_cleanup
+
%files
%defattr(-, root, root, 0755)
%doc CHANGES README
%doc autossh.host rscreen
%{_bindir}/autossh
+%{_initrddir}/autossh
+%{_sbindir}/rcautossh
+/var/adm/fillup-templates/sysconfig.autossh
%doc %{_mandir}/man1/autossh.1*
%changelog
-* Sun Jun 7 2009 Pascal Bleser - 1.4b
-- use bz2 source
-- fix macro usage
-- install autossh.host and rscreen as %%doc files, instead of /usr/share/examples/autossh
-
-* Tue Feb 17 2009 - mstopka@opensuse.org
-- adopted for Contrib
-- makefile-destdir patch
-* Thu Jun 26 2008 Mike Veltman - 1.4b
-- updated to release 1.4b
-
-* Sat Oct 20 2007 Mike Veltman - 1.4a-1
-- Prepare for repackage buildservice suse
-
-* Fri Jul 14 2006 Dag Wieers - 1.4a-1
-- Updated to release 1.4a.
-
-* Fri Jun 09 2006 Dag Wieers - 1.4-1
-- Updated to release 1.4.
-
-* Thu Mar 24 2005 Dag Wieers - 1.3-2
-- Added openssh-clients dependency. (Adrian Reber)
-- Build with %%{optflags}. (Adrian Reber)
-
-* Wed Mar 23 2005 Dag Wieers - 1.3-1
-- Updated to release 1.3.
-
-* Fri Dec 10 2004 Dag Wieers - 1.2-2.g
-- Fixed Group tag.
-
-* Thu Dec 09 2004 Dag Wieers - 1.2-1.g
-- Updated to release 1.2g.
-
-* Fri Sep 24 2004 Dag Wieers - 1.2-1.f
-- Initial package. (using DAR)
-
other changes:
--------------
++++++ autossh-1.4c.tar.bz2 (new)
++++++ autossh.conf (new)
--- autossh.conf
+++ autossh.conf
@@ -0,0 +1,39 @@
+## Path: Network/Remote access/Autossh
+## Description: Autossh service settings
+
+## Type: integer
+## Default: 0
+#
+# Time ssh must be up before it is considered a successful connection.
+# If set to 0, then this behaviour is disabled, and as well, autossh
+# will retry even on failure of first attempt to run ssh.
+AUTOSSH_GATETIME="0"
+
+## Type: list(0,1,2,3,4,5,6,7)
+## Default: 7
+#
+# Specifies the log level, corresponding to the levels used by syslog.
+AUTOSSH_LOGLEVEL="7"
+
+## Type: integer
+## Default: 600
+#
+# Poll time in seconds. If the poll time is less than twice the network
+# timeouts (default 15 seconds) the network timeouts will be adjusted
+# downward to 1/2 the poll time.
+AUTOSSH_POLL="600"
+
+## Type: string
+## Default: 0
+## Format: <port>[:echo_port]
+#
+# The base monitoring port to use, or alternatively, the monitoring
+# port and the echo service port to use. Setting 0 will turn the
+# monitoring off, and autossh will only restart ssh on ssh exit.
+AUTOSSH_PORT="0"
+
+## Type: string
+## Default: user@example.com -p 22 -nNT -R 30000:localhost:22 -o ExitOnForwardFailure=yes
+#
+# Options to be passed to ssh
+AUTOSSH_OPTIONS="user@example.com -p 22 -nNT -R 30000:localhost:22 -o ExitOnForwardFailure=yes"
++++++ autossh.init (new)
--- autossh.init
+++ autossh.init
@@ -0,0 +1,95 @@
+#!/bin/sh
+#
+# SUSE system startup script for autossh
+#
+# Author: Plamen Kolev
+#
+# /etc/init.d/autossh
+# and its symbolic link
+# /usr/sbin/rcautossh
+#
+### BEGIN INIT INFO
+# Provides: autossh
+# Required-Start: $local_fs $remote_fs $syslog $network $named sshd
+# Should-Start:
+# Required-Stop: $local_fs $remote_fs $syslog $network $named sshd
+# Should-Stop:
+# Default-Start: 3 5
+# Default-Stop: 0 1 2 6
+# Short-Description: Autossh service
+# Description: Starts autossh as a service daemon
+### END INIT INFO
+
+AUTOSSH_BIN=/usr/bin/autossh
+test -x $AUTOSSH_BIN || { echo "$AUTOSSH_BIN not installed";
+ if [ "$1" = "stop" ]; then exit 0;
+ else exit 5; fi; }
+
+AUTOSSH_CONFIG=/etc/sysconfig/autossh
+test -r $AUTOSSH_CONFIG || { echo "$AUTOSSH_CONFIG not existing";
+ if [ "$1" = "stop" ]; then exit 0;
+ else exit 6; fi; }
+
+. $AUTOSSH_CONFIG
+
+. /etc/rc.status
+
+rc_reset
+
+case "$1" in
+ start)
+ export AUTOSSH_FIRST_POLL="60"
+ export AUTOSSH_PIDFILE="/var/run/autossh.pid"
+ export AUTOSSH_GATETIME
+ export AUTOSSH_LOGLEVEL
+ export AUTOSSH_POLL
+ export AUTOSSH_PORT
+
+ echo -n "Starting autossh "
+ /sbin/startproc $AUTOSSH_BIN $AUTOSSH_OPTIONS
+
+ rc_status -v
+ ;;
+ stop)
+ echo -n "Shutting down autossh "
+ /sbin/killproc $AUTOSSH_BIN
+
+ rc_status -v
+ ;;
+ try-restart|condrestart)
+ if test "$1" = "condrestart"; then
+ echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"
+ fi
+ $0 status
+ if test $? = 0; then
+ $0 restart
+ else
+ rc_reset
+ fi
+
+ rc_status
+ ;;
+ restart)
+ $0 stop
+ $0 start
+
+ rc_status
+ ;;
+ force-reload)
+ echo -n "Reload service autossh "
+ $0 try-restart
+
+ rc_status
+ ;;
+ status)
+ echo -n "Checking for service autossh "
+ /sbin/checkproc $AUTOSSH_BIN
+
+ rc_status -v
+ ;;
+ *)
+ echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload}"
+ exit 1
+ ;;
+esac
+rc_exit
++++++ deleted files:
--- autossh-1.4b.tar.bz2
To REVIEW against the previous version:
osc request show --diff 113948
To ACCEPT the request:
osc request accept 113948 --message="reviewed ok."
To DECLINE the request:
osc request decline 113948 --message="declined for reason xyz (see ... for background / policy / ...)."
To REVOKE the request:
osc request revoke 113948 --message="retracted because ..., sorry / thx / see better version ..."
--
Hermes messaging (http://hermes.opensuse.org)
openSUSE Build Service (https://build.opensuse.org/)
Collaboration: http://en.opensuse.org/Build_Service/Collaboration
--
To unsubscribe, e-mail: opensuse-contrib+unsubscribe@opensuse.org
To contact the owner, e-mail: opensuse-contrib+owner@opensuse.org
