Mailinglist Archive: opensuse-commit (1903 mails)

< Previous Next >
commit rfcat for openSUSE:Factory
Hello community,

here is the log from the commit of package rfcat for openSUSE:Factory checked
in at 2019-04-17 13:31:21
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/rfcat (Old)
and /work/SRC/openSUSE:Factory/.rfcat.new.17052 (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Package is "rfcat"

Wed Apr 17 13:31:21 2019 rev:3 rq:695027 version:0.0.0.git1554316953.d960f01

Changes:
--------
--- /work/SRC/openSUSE:Factory/rfcat/rfcat.changes 2017-11-09
14:05:32.010203756 +0100
+++ /work/SRC/openSUSE:Factory/.rfcat.new.17052/rfcat.changes 2019-04-17
13:31:25.435640665 +0200
@@ -1,0 +2,27 @@
+Sat Apr 13 12:11:48 UTC 2019 - John Vandenberg <jayvdb@xxxxxxxxx>
+
+- Add avoid-pyside.patch, replacing dependency on python3-pyside2
+ with python-qt5
+- Activate test suite
+
+-------------------------------------------------------------------
+Fri Apr 12 12:18:00 UTC 2019 - Christophe Giboudeaux <christophe@xxxxxxx>
+
+- Fix the dependencies. rfcat is preparing for the py3 switch
+- Fix a typo, pyside2 is only built for python3
+
+-------------------------------------------------------------------
+Mon Apr 8 20:52:10 UTC 2019 - Christophe Giboudeaux <christophe@xxxxxxx>
+
+- Update to version 0.0.0.git1554316953.d960f01:
+ * Support SRF-Stick from Ciseco
+ * Enable control of LED during rf activities, for power management
+ * Fix broken SRF conditional that most likely caused Chronos dongle to break
+ * addition of 4FSK (hidden feature of the CC1101 radio built into CC1111)
+ * Migrate ccspecan to PySide2
+ * Drop support for Python 2.6 and older
+ * udev rule cleanup
+- Update the dependencies. rfcat master requires PySide2.
+- Run spec-cleaner.
+
+-------------------------------------------------------------------

Old:
----
rfcat-0.0.0.git1502127218.53b26b4.tar.xz

New:
----
avoid-pyside.patch
rfcat-0.0.0.git1554316953.d960f01.tar.xz

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Other differences:
------------------
++++++ rfcat.spec ++++++
--- /var/tmp/diff_new_pack.3qvSPc/_old 2019-04-17 13:31:27.151641492 +0200
+++ /var/tmp/diff_new_pack.3qvSPc/_new 2019-04-17 13:31:27.163641497 +0200
@@ -1,6 +1,7 @@
#
# spec file for package rfcat
#
+# Copyright (c) 2019 SUSE LINUX GmbH, Nuernberg, Germany.
# Copyright (c) 2017, Martin Hauke <mardnh@xxxxxx>
#
# All modifications and additions to the file contributed by third parties
@@ -12,27 +13,43 @@
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

-# Please submit bugfixes or comments via http://bugs.opensuse.org/
+# Please submit bugfixes or comments via https://bugs.opensuse.org/
#

+
%define rfcat_group rfcat
Name: rfcat
-Version: 0.0.0.git1502127218.53b26b4
+Version: 0.0.0.git1554316953.d960f01
Release: 0
Summary: The swiss army knife of subGHz
License: BSD-2-Clause
Group: Productivity/Hamradio/Other
URL: https://github.com/atlas0fd00m/rfcat
+# Refreshed version of
https://github.com/3553x/rfcat/commit/8b2ad00da6b25b188b6800aeea3cc811243a8c15.patch
+Patch0: avoid-pyside.patch
Source: %{name}-%{version}.tar.xz
BuildRequires: git-core
BuildRequires: pkgconfig
BuildRequires: python-devel
+BuildRequires: python-future >= 0.17.1
+BuildRequires: python-numpy
+BuildRequires: python-qt5
BuildRequires: python-setuptools
+BuildRequires: python-usb
+# for rfcat_bootloader
+BuildRequires: python-pyserial
+BuildRequires: pkgconfig
+BuildRequires: pkgconfig(libusb-1.0)
BuildRequires: pkgconfig(udev)
Requires: %{name}-udev
+# Unfortunately this isnt automatically detected.
+Requires: libusb-1_0-0
+Requires: python-future >= 0.17.1
Requires: python-numpy
-Requires: python-pyside
+Requires: python-qt5
Requires: python-usb
+# for rfcat_bootloader
+Requires: python-pyserial
BuildArch: noarch

%description
@@ -45,10 +62,12 @@
Requires(pre): shadow

%description udev
-Udev rules for rfcat
+Udev rules for rfcat.

%prep
%setup -q
+%patch0 -p1
+
# Remove files that may be problematic from a license point of view
rm -f firmware/cc1111_vcom.c
rm -f firmware/cc1111_vcomdesc.c
@@ -56,6 +75,23 @@
# HACK: set udev group to rfcat
sed -i 's|GROUP="dialout"|GROUP="rfcat"|g' etc/udev/rules.d/20-rfcat.rules

+# Loosen pins to allow use of higher version rpms
+sed -i 's/==/>=/g' setup.py
+
+# PySide2 is replaced with qt5
+sed -i '/PySide2>=[0-9.]*/d' setup.py
+
+# Declared dependency on Python package libusb seems incorrect.
+# Likely it refers to system libusb.
+# Anyway, that isnt packaged in openSUSE yet, so dont inject it into
+# runtime dependencies.
+sed -i '/libusb/d' setup.py
+
+# These are a mix of python and ipython interpreters in the hashbang,
+# but residing inside the site-packages and they have relative imports
+# making them not executable as-is.
+sed -i '1{/#!/d}' rflib/*.py
+
%build
python setup.py build

@@ -63,6 +99,11 @@
python setup.py install --prefix=%{_prefix} --root=%{buildroot}
install -Dpm0644 etc/udev/rules.d/20-rfcat.rules
%{buildroot}%{_udevrulesdir}/20-rfcat.rules

+%check
+# use setuptools instead of distutils only during testing.
+sed -i 's/distutils.core/setuptools/' setup.py
+python setup.py test
+
%pre udev
getent group %{rfcat_group} >/dev/null || groupadd -r %{rfcat_group}

@@ -73,14 +114,15 @@
%udev_rules_update

%files
-%doc LICENSE README.md README.immesniff
+%license LICENSE
+%doc README.md README.immesniff
%{_bindir}/rfcat
%{_bindir}/rfcat_bootloader
%{_bindir}/rfcat_msfrelay
%{_bindir}/rfcat_server
%{python_sitelib}/rflib
%{python_sitelib}/vstruct
-%{python_sitelib}/rfcat-1.0-py%{py_ver}.egg-info
+%{python_sitelib}/rfcat-1.0.1-py%{py_ver}.egg-info

%files udev
%{_udevrulesdir}/20-rfcat.rules

++++++ _servicedata ++++++
--- /var/tmp/diff_new_pack.3qvSPc/_old 2019-04-17 13:31:27.203641517 +0200
+++ /var/tmp/diff_new_pack.3qvSPc/_new 2019-04-17 13:31:27.207641519 +0200
@@ -1,4 +1,4 @@
<servicedata>
<service name="tar_scm">
<param
name="url">https://github.com/atlas0fd00m/rfcat.git</param>
- <param
name="changesrevision">f65c448587ea651c6ea4f2f1fd3c5433e551347e</param></service></servicedata>
\ No newline at end of file
+ <param
name="changesrevision">d960f012ab92ae892f83c9f627e97dda231fef34</param></service></servicedata>
\ No newline at end of file

++++++ avoid-pyside.patch ++++++
From 8b2ad00da6b25b188b6800aeea3cc811243a8c15 Mon Sep 17 00:00:00 2001
From: 3553x <3553x@xxxxxxx>
Date: Sun, 28 Oct 2018 22:20:22 +0000
Subject: [PATCH] Replace PySide with PyQt5 in ccspecan

---
rflib/ccspecan.py | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)

Index: rfcat-0.0.0.git1554316953.d960f01/rflib/ccspecan.py
===================================================================
--- rfcat-0.0.0.git1554316953.d960f01.orig/rflib/ccspecan.py
+++ rfcat-0.0.0.git1554316953.d960f01/rflib/ccspecan.py
@@ -39,13 +39,15 @@ if sys.version_info < (3,):
else:
import pickle as pickle

-from PySide2 import QtCore, QtGui, QtWidgets
-from PySide2.QtCore import Qt, QPointF, QLineF
+import PyQt5.QtWidgets
+from PyQt5 import QtCore, QtGui
+from PyQt5.QtCore import Qt, QPointF, QLineF
+

def ensureQapp():
global _qt_app
if not globals().get("_qt_app"):
- _qt_app = QtWidgets.QApplication([])
+ _qt_app = PyQt5.QtWidgets.QApplication([])


APP_SPECAN = 0x43
@@ -99,9 +101,9 @@ class SpecanThread(threading.Thread):
self.join(3.0)
self._stopped = True

-class RenderArea(QtWidgets.QWidget):
+class RenderArea(PyQt5.QtWidgets.QWidget):
def __init__(self, data, low_freq=2.400e9, high_freq=2.483e9,
freq_step=1e6, delay=0, parent=None):
- QtWidgets.QWidget.__init__(self, parent)
+ PyQt5.QtWidgets.QWidget.__init__(self, parent)

self._graph = None
self._reticle = None
@@ -326,9 +328,9 @@ class RenderArea(QtWidgets.QWidget):
delta = tmp * range
return self._high_dbm - delta

-class Window(QtWidgets.QWidget):
+class Window(PyQt5.QtWidgets.QWidget):
def __init__(self, data, low_freq, high_freq, spacing, delay=.01,
parent=None):
- QtWidgets.QWidget.__init__(self, parent)
+ PyQt5.QtWidgets.QWidget.__init__(self, parent)

self._low_freq = low_freq
self._high_freq = high_freq
@@ -339,7 +341,7 @@ class Window(QtWidgets.QWidget):

self.render_area = RenderArea(self._data, low_freq, high_freq,
spacing, delay)

- main_layout = QtWidgets.QGridLayout()
+ main_layout = PyQt5.QtWidgets.QGridLayout()
main_layout.setContentsMargins(0, 0, 0, 0)
main_layout.addWidget(self.render_area, 0, 0)
self.setLayout(main_layout)
@@ -450,7 +452,7 @@ class Window(QtWidgets.QWidget):
print('Unsupported key pressed:', key)

if __name__ == '__main__':
- app = QtWidgets.QApplication(sys.argv)
+ app = PyQt5.QtWidgets.QApplication(sys.argv)
f = sys.argv[1]
fbase = eval(sys.argv[2])
fhigh = eval(sys.argv[3])
++++++ rfcat-0.0.0.git1502127218.53b26b4.tar.xz ->
rfcat-0.0.0.git1554316953.d960f01.tar.xz ++++++
++++ 3622 lines of diff (skipped)


< Previous Next >
This Thread
  • No further messages