Hello community,
here is the log from the commit of package hwinfo for openSUSE:Factory checked in at 2016-06-13 21:49:09
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/hwinfo (Old)
and /work/SRC/openSUSE:Factory/.hwinfo.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "hwinfo"
Changes:
--------
--- /work/SRC/openSUSE:Factory/hwinfo/hwinfo.changes 2016-06-03 16:35:50.000000000 +0200
+++ /work/SRC/openSUSE:Factory/.hwinfo.new/hwinfo.changes 2016-06-13 21:49:10.000000000 +0200
@@ -1,0 +2,7 @@
+Wed Jun 8 10:44:44 UTC 2016 - snwint@suse.com
+
+- add aliases with '-' for options with '_' (bsc#983004)
+- clarify hwinfo usage in man page and help text (bsc#982332)
+- 21.27
+
+-------------------------------------------------------------------
Old:
----
hwinfo-21.26.tar.xz
New:
----
hwinfo-21.27.tar.xz
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ hwinfo.spec ++++++
--- /var/tmp/diff_new_pack.439EF2/_old 2016-06-13 21:49:11.000000000 +0200
+++ /var/tmp/diff_new_pack.439EF2/_new 2016-06-13 21:49:11.000000000 +0200
@@ -36,7 +36,7 @@
Group: Hardware/Other
# Until migration to github this should be correct url
Url: http://gitorious.org/opensuse/hwinfo
-Version: 21.26
+Version: 21.27
Release: 0
Source: %{name}-%{version}.tar.xz
BuildRoot: %{_tmppath}/%{name}-%{version}-build
++++++ hwinfo-21.26.tar.xz -> hwinfo-21.27.tar.xz ++++++
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/hwinfo-21.26/VERSION new/hwinfo-21.27/VERSION
--- old/hwinfo-21.26/VERSION 2016-05-30 13:56:19.000000000 +0200
+++ new/hwinfo-21.27/VERSION 2016-06-08 12:40:59.000000000 +0200
@@ -1 +1 @@
-21.26
+21.27
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/hwinfo-21.26/changelog new/hwinfo-21.27/changelog
--- old/hwinfo-21.26/changelog 2016-05-30 13:56:19.000000000 +0200
+++ new/hwinfo-21.27/changelog 2016-06-08 12:40:59.000000000 +0200
@@ -1,3 +1,7 @@
+2016-06-08: 21.27
+ - add aliases with '-' for options with '_' (bsc #983004)
+ - clarify hwinfo usage in man page and help text (bsc #982332)
+
2016-05-30: 21.26
- change wording for SCSI reference
- add reference to SCSI command specification
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/hwinfo-21.26/doc/hwinfo.8 new/hwinfo-21.27/doc/hwinfo.8
--- old/hwinfo-21.26/doc/hwinfo.8 2016-05-30 13:56:19.000000000 +0200
+++ new/hwinfo-21.27/doc/hwinfo.8 2016-06-08 12:40:59.000000000 +0200
@@ -1,5 +1,6 @@
-.TH HWINFO 8 "June 2009" "hwinfo" "System configuration"
+.TH HWINFO 8 "June 2016" "hwinfo" "System configuration"
.\"
+.nh
.SH NAME
hwinfo \- probe for hardware
.\"
@@ -27,6 +28,8 @@
network, partition, pci, pcmcia, pcmcia-ctrl, pppoe, printer, redasd,
reallyall, scanner, scsi, smp, sound, storage-ctrl, sys, tape, tv, uml, usb,
usb-ctrl, vbe, wlan, xen, zip
+
+Note that if this option is missing, no hardware probing will be done!
.TP
\fB--short\fR
Show only a summary. Use this option in addition to a hardware probing
@@ -36,8 +39,10 @@
Normally hwinfo does not report RAID devices. Add this option to see them.
.TP
\fB--only \fIDEVNAME\fR
-This option can be given more than once. If you add this option, only data
-about devices with \fIDEVNAME\fR will be shown.
+This option can be given more than once. If you add this option
+only entries in the device list matching \fIDEVNAME\fR will be shown.
+Note that you also have to specify --<\fIHARDWARE_ITEM\fR> to trigger
+any device probing.
.TP
\fB--save-config \fISPEC\fR
Store config for a particular device below /var/lib/hardware. \fISPEC\fR
@@ -54,13 +59,15 @@
.TP
\fB--debug \fIN\fR
Set debug level to \fIN\fR. The debug info is shown only in the log file.
-If you specify a log file, the debug level is implicitly set to a reasonable value.
+If you specify a log file, the debug level is implicitly set to a reasonable value
+(N is a bitmask of individual flags).
.TP
\fB--verbose\fR
Increase verbosity. Only together with --map.
.TP
\fB--log \fIFILE\fR
Write log info to \fIFILE\fR.
+Don't forget to also specify --<\fIHARDWARE_ITEM\fR> to trigger any device probing.
.TP
\fB--dump-db \fIN\fR
Dump hardware data base. \fIN\fR is either 0 for the external data base in
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/hwinfo-21.26/hwinfo.c new/hwinfo-21.27/hwinfo.c
--- old/hwinfo-21.26/hwinfo.c 2016-05-30 13:56:19.000000000 +0200
+++ new/hwinfo-21.27/hwinfo.c 2016-06-08 12:40:59.000000000 +0200
@@ -150,12 +150,16 @@
{ "memory", 0, NULL, 1000 + hw_memory },
{ "manual", 0, NULL, 1000 + hw_manual },
{ "pcmcia", 0, NULL, 1000 + hw_pcmcia },
+ { "pcmcia-ctrl", 0, NULL, 1000 + hw_pcmcia_ctrl },
{ "pcmcia_ctrl", 0, NULL, 1000 + hw_pcmcia_ctrl },
{ "ieee1394", 0, NULL, 1000 + hw_ieee1394 },
+ { "ieee1394-ctrl", 0, NULL, 1000 + hw_ieee1394_ctrl },
{ "ieee1394_ctrl", 0, NULL, 1000 + hw_ieee1394_ctrl },
{ "firewire", 0, NULL, 1000 + hw_ieee1394 },
+ { "firewire-ctrl", 0, NULL, 1000 + hw_ieee1394_ctrl },
{ "firewire_ctrl", 0, NULL, 1000 + hw_ieee1394_ctrl },
{ "hotplug", 0, NULL, 1000 + hw_hotplug },
+ { "hotplug-ctrl", 0, NULL, 1000 + hw_hotplug_ctrl },
{ "hotplug_ctrl", 0, NULL, 1000 + hw_hotplug_ctrl },
{ "zip", 0, NULL, 1000 + hw_zip },
{ "pppoe", 0, NULL, 1000 + hw_pppoe },
@@ -817,8 +821,10 @@
" Normally hwinfo does not report RAID devices. Add this option to\n"
" see them.\n"
" --only DEVNAME\n"
- " This option can be given more than once. If you add this option,\n"
- " only data about devices with DEVNAME will be shown.\n"
+ " This option can be given more than once. If you add this option\n"
+ " only entries in the device list matching DEVNAME will be shown.\n"
+ " Note that you also have to specify --