Hello community,
here is the log from the commit of package u-boot for openSUSE:Factory checked in at 2015-12-21 12:04:37
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/u-boot (Old)
and /work/SRC/openSUSE:Factory/.u-boot.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "u-boot"
Changes:
--------
--- /work/SRC/openSUSE:Factory/u-boot/u-boot-a10-olinuxino-lime.changes 2015-12-01 09:19:13.000000000 +0100
+++ /work/SRC/openSUSE:Factory/.u-boot.new/u-boot-a10-olinuxino-lime.changes 2015-12-21 12:04:43.000000000 +0100
@@ -1,0 +2,24 @@
+Tue Dec 15 09:27:03 UTC 2015 - guillaume@opensuse.org
+
+- Backport U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
+ to fix bootdelay on Beaglebone board
+
+-------------------------------------------------------------------
+Tue Dec 15 09:15:30 UTC 2015 - guillaume@opensuse.org
+
+- Add orangepi_pc board
+
+-------------------------------------------------------------------
+Fri Dec 11 09:23:17 UTC 2015 - guillaume@opensuse.org
+
+- Add support to am57xx_evm (beagle_x15 with u-boot DT)
+
+-------------------------------------------------------------------
+Fri Dec 11 09:08:25 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2016.01-rc2:
+- Rename 'beagle_x15' to 'am57xx_evm_nodt' to follow upstream
+- Remove upstreamed patch:
+ * U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch
+
+-------------------------------------------------------------------
u-boot-a13-olinuxino.changes: same change
u-boot-a13-olinuxinom.changes: same change
u-boot-a20-olinuxino-lime.changes: same change
u-boot-a20-olinuxino-lime2.changes: same change
u-boot-a20-olinuxinomicro.changes: same change
u-boot-am335xevm.changes: same change
New Changes file:
--- /dev/null 2015-11-02 12:10:47.524024255 +0100
+++ /work/SRC/openSUSE:Factory/.u-boot.new/u-boot-am57xxevm.changes 2015-12-21 12:04:43.000000000 +0100
@@ -0,0 +1,920 @@
+-------------------------------------------------------------------
+Tue Dec 15 09:27:03 UTC 2015 - guillaume@opensuse.org
+
+- Backport U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
+ to fix bootdelay on Beaglebone board
+
+-------------------------------------------------------------------
+Tue Dec 15 09:15:30 UTC 2015 - guillaume@opensuse.org
+
+- Add orangepi_pc board
+
+-------------------------------------------------------------------
+Fri Dec 11 09:23:17 UTC 2015 - guillaume@opensuse.org
+
+- Add support to am57xx_evm (beagle_x15 with u-boot DT)
+
+-------------------------------------------------------------------
+Fri Dec 11 09:08:25 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2016.01-rc2:
+- Rename 'beagle_x15' to 'am57xx_evm_nodt' to follow upstream
+- Remove upstreamed patch:
+ * U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch
+
+-------------------------------------------------------------------
+Wed Nov 25 09:38:56 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2016.01-rc1
+- Remove upstreamed patches:
+ * 0001-configs-Use-config_distro_defaults.h-in-ti_armv7_com.patch
+ * 0001-mx6cuboxi-use-load-instead-of-fatload.patch (no more needed)
+ * U-Boot-image.c-Fix-non-Android-booting-with-ramdisk-and-or-device-tree.patch
+- Update drop-marvell.patch
+
+-------------------------------------------------------------------
+Sun Nov 15 13:11:56 UTC 2015 - matwey.kornilov@gmail.com
+
+- Backport 0001-configs-Use-config_distro_defaults.h-in-ti_armv7_com.patch
+
+-------------------------------------------------------------------
+Sat Nov 14 15:03:05 UTC 2015 - tbechtold@suse.com
+
+- 0001-mx6cuboxi-use-load-instead-of-fatload.patch
+ for cubox-i use load instead of fatload
+
+-------------------------------------------------------------------
+Tue Nov 3 08:14:57 UTC 2015 - matwey.kornilov@gmail.com
+
+- Fix am335x booting
+ * U-Boot-image.c-Fix-non-Android-booting-with-ramdisk-and-or-device-tree.patch
+
+-------------------------------------------------------------------
+Wed Oct 21 08:16:32 UTC 2015 - guillaume@opensuse.org
+
+- Add Beagle x15 support
+- Fix build for Beagle x15:
+ * U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch
+
+-------------------------------------------------------------------
+Tue Oct 20 11:32:30 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2015.10
+- Remove upstreamed patches:
+ * 0001-odroid-replace-fatload-with-load-to-be-able-to-use-E.patch
+ * 0002-odroid-Add-boot-script-boot.scr-support.patch
+
+-------------------------------------------------------------------
+Tue Oct 13 06:58:38 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2015.10-rc5
+- Remove upstreamed patch:
+ * arndale-apply-cortex-a15-erratas.patch
+
+-------------------------------------------------------------------
+Thu Oct 8 09:27:15 UTC 2015 - guillaume@opensuse.org
+
+- Add boot script support to odroid board:
+ * 0001-odroid-replace-fatload-with-load-to-be-able-to-use-E.patch
+ * 0002-odroid-Add-boot-script-boot.scr-support.patch
+
+-------------------------------------------------------------------
+Mon Oct 5 18:04:28 UTC 2015 - afaerber@suse.de
+
+- Add spring and firefly-rk3288 for armv7hl
+ * Break overly long armv7_boards line in pre_checkin.sh
+ * Clean up case'ing of defconfigs to avoid excessive wildcards
+- Prepare for adding qemu-ppce500 for ppc
+ * Allow for more than two exclusive architectures (cleanup)
+
+-------------------------------------------------------------------
+Mon Oct 5 11:42:08 UTC 2015 - dmueller@suse.com
+
+- add arndale-apply-cortex-a15-erratas.patch
+
+-------------------------------------------------------------------
+Thu Oct 1 16:41:38 UTC 2015 - guillaume.gardet@opensuse.org
+
+- Update to 2015.10-rc4
+- Update drop-marvell.patch
+
+-------------------------------------------------------------------
+Sat Sep 12 12:22:53 UTC 2015 - guillaume@opensuse.org
+
+- Use u-boot-2015.10-rc3.tar.bz2 package provided on FTP instead of
+ packaging it manually.
+
+-------------------------------------------------------------------
+Tue Sep 8 08:52:56 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2015.10-rc3
+
+-------------------------------------------------------------------
+Wed Sep 2 16:28:02 UTC 2015 - guillaume@opensuse.org
+
+- Add odroid and odroid-xu3
+
+-------------------------------------------------------------------
+Tue Aug 18 08:31:48 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2015.10-rc2
+- Remove upstreamed patch:
+ * jetson-tk1-gpu-1.patch
+ * jetson-tk1-gpu-2.patch
+
+-------------------------------------------------------------------
+Thu Aug 6 12:40:58 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2015.10-rc1
+- Remove upstreamed patch:
+ * mx53loco-bootscr.patch
+- Update patches:
+ * jetson-tk1-gpu-1.patch
+ * jetson-tk1-gpu-2.patch
+
+-------------------------------------------------------------------
+Wed Aug 5 13:36:45 UTC 2015 - dmueller@suse.com
+
+- add mx6cuboxi
+
+-------------------------------------------------------------------
+Wed Jul 22 22:38:23 UTC 2015 - afaerber@suse.de
+
+- jetson-tk1-gpu-1.patch,
+ jetson-tk1-gpu-2.patch: Enable the Tegra124 GPU device tree node
+
+-------------------------------------------------------------------
+Mon Jul 20 10:45:39 UTC 2015 - afaerber@suse.de
+
+- Add u-boot-jetson-tk1
+
+-------------------------------------------------------------------
+Fri Jul 17 06:42:37 UTC 2015 - afaerber@suse.de
+
+- Add u-boot-merriia80optimus
+
+-------------------------------------------------------------------
+Wed Jul 15 13:05:24 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2015.07
+
+-------------------------------------------------------------------
+Tue Jun 30 07:34:49 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2015.07-rc3
+- Remove upstreamed patches:
+ * enable_spl_ext_support_for_ti_armv7.patch
+ * fix_slow_mmc_on_rpi.patch
+
+-------------------------------------------------------------------
+Thu Jun 18 12:07:10 UTC 2015 - guillaume@opensuse.org
+
+- Add fix_slow_mmc_on_rpi.patch to speed up MMC load on RPi
+- Rework patches (to be upstreamable):
+ * enable_spl_ext_support_for_ti_armv7.patch
+ * mx53loco-bootscr.patch
+- Remove fix_beagle_spl_build.patch
+
+-------------------------------------------------------------------
+Wed Jun 10 10:07:23 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2015.07-rc2
+- Update drop-marvell.patch
+
+-------------------------------------------------------------------
+Wed May 27 10:07:49 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2015.07-rc1:
+- Update drop-marvell.patch
+- Remove no more needed add_snow_usb_boot.patch
+
+-------------------------------------------------------------------
+Wed Apr 29 07:51:25 UTC 2015 - dmueller@suse.com
+
+- adjust copyright headers
+
+-------------------------------------------------------------------
+Thu Apr 16 08:34:11 UTC 2015 - guillaume@opensuse.org
++++ 723 more lines (skipped)
++++ between /dev/null
++++ and /work/SRC/openSUSE:Factory/.u-boot.new/u-boot-am57xxevm.changes
New Changes file:
u-boot-am57xxevmnodt.changes: same change
--- /work/SRC/openSUSE:Factory/u-boot/u-boot-arndale.changes 2015-12-01 09:19:13.000000000 +0100
+++ /work/SRC/openSUSE:Factory/.u-boot.new/u-boot-arndale.changes 2015-12-21 12:04:43.000000000 +0100
@@ -1,0 +2,24 @@
+Tue Dec 15 09:27:03 UTC 2015 - guillaume@opensuse.org
+
+- Backport U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
+ to fix bootdelay on Beaglebone board
+
+-------------------------------------------------------------------
+Tue Dec 15 09:15:30 UTC 2015 - guillaume@opensuse.org
+
+- Add orangepi_pc board
+
+-------------------------------------------------------------------
+Fri Dec 11 09:23:17 UTC 2015 - guillaume@opensuse.org
+
+- Add support to am57xx_evm (beagle_x15 with u-boot DT)
+
+-------------------------------------------------------------------
+Fri Dec 11 09:08:25 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2016.01-rc2:
+- Rename 'beagle_x15' to 'am57xx_evm_nodt' to follow upstream
+- Remove upstreamed patch:
+ * U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch
+
+-------------------------------------------------------------------
u-boot-bananapi.changes: same change
u-boot-colibrit20.changes: same change
u-boot-cubieboard.changes: same change
u-boot-cubieboard2.changes: same change
u-boot-cubietruck.changes: same change
u-boot-firefly-rk3288.changes: same change
u-boot-highbank.changes: same change
u-boot-jetson-tk1.changes: same change
u-boot-melea1000.changes: same change
u-boot-merriia80optimus.changes: same change
u-boot-mx53loco.changes: same change
u-boot-mx6cuboxi.changes: same change
u-boot-mx6qsabrelite.changes: same change
u-boot-odroid-xu3.changes: same change
u-boot-odroid.changes: same change
u-boot-omap3beagle.changes: same change
u-boot-omap4panda.changes: same change
New Changes file:
--- /dev/null 2015-11-02 12:10:47.524024255 +0100
+++ /work/SRC/openSUSE:Factory/.u-boot.new/u-boot-orangepipc.changes 2015-12-21 12:04:45.000000000 +0100
@@ -0,0 +1,920 @@
+-------------------------------------------------------------------
+Tue Dec 15 09:27:03 UTC 2015 - guillaume@opensuse.org
+
+- Backport U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
+ to fix bootdelay on Beaglebone board
+
+-------------------------------------------------------------------
+Tue Dec 15 09:15:30 UTC 2015 - guillaume@opensuse.org
+
+- Add orangepi_pc board
+
+-------------------------------------------------------------------
+Fri Dec 11 09:23:17 UTC 2015 - guillaume@opensuse.org
+
+- Add support to am57xx_evm (beagle_x15 with u-boot DT)
+
+-------------------------------------------------------------------
+Fri Dec 11 09:08:25 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2016.01-rc2:
+- Rename 'beagle_x15' to 'am57xx_evm_nodt' to follow upstream
+- Remove upstreamed patch:
+ * U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch
+
+-------------------------------------------------------------------
+Wed Nov 25 09:38:56 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2016.01-rc1
+- Remove upstreamed patches:
+ * 0001-configs-Use-config_distro_defaults.h-in-ti_armv7_com.patch
+ * 0001-mx6cuboxi-use-load-instead-of-fatload.patch (no more needed)
+ * U-Boot-image.c-Fix-non-Android-booting-with-ramdisk-and-or-device-tree.patch
+- Update drop-marvell.patch
+
+-------------------------------------------------------------------
+Sun Nov 15 13:11:56 UTC 2015 - matwey.kornilov@gmail.com
+
+- Backport 0001-configs-Use-config_distro_defaults.h-in-ti_armv7_com.patch
+
+-------------------------------------------------------------------
+Sat Nov 14 15:03:05 UTC 2015 - tbechtold@suse.com
+
+- 0001-mx6cuboxi-use-load-instead-of-fatload.patch
+ for cubox-i use load instead of fatload
+
+-------------------------------------------------------------------
+Tue Nov 3 08:14:57 UTC 2015 - matwey.kornilov@gmail.com
+
+- Fix am335x booting
+ * U-Boot-image.c-Fix-non-Android-booting-with-ramdisk-and-or-device-tree.patch
+
+-------------------------------------------------------------------
+Wed Oct 21 08:16:32 UTC 2015 - guillaume@opensuse.org
+
+- Add Beagle x15 support
+- Fix build for Beagle x15:
+ * U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch
+
+-------------------------------------------------------------------
+Tue Oct 20 11:32:30 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2015.10
+- Remove upstreamed patches:
+ * 0001-odroid-replace-fatload-with-load-to-be-able-to-use-E.patch
+ * 0002-odroid-Add-boot-script-boot.scr-support.patch
+
+-------------------------------------------------------------------
+Tue Oct 13 06:58:38 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2015.10-rc5
+- Remove upstreamed patch:
+ * arndale-apply-cortex-a15-erratas.patch
+
+-------------------------------------------------------------------
+Thu Oct 8 09:27:15 UTC 2015 - guillaume@opensuse.org
+
+- Add boot script support to odroid board:
+ * 0001-odroid-replace-fatload-with-load-to-be-able-to-use-E.patch
+ * 0002-odroid-Add-boot-script-boot.scr-support.patch
+
+-------------------------------------------------------------------
+Mon Oct 5 18:04:28 UTC 2015 - afaerber@suse.de
+
+- Add spring and firefly-rk3288 for armv7hl
+ * Break overly long armv7_boards line in pre_checkin.sh
+ * Clean up case'ing of defconfigs to avoid excessive wildcards
+- Prepare for adding qemu-ppce500 for ppc
+ * Allow for more than two exclusive architectures (cleanup)
+
+-------------------------------------------------------------------
+Mon Oct 5 11:42:08 UTC 2015 - dmueller@suse.com
+
+- add arndale-apply-cortex-a15-erratas.patch
+
+-------------------------------------------------------------------
+Thu Oct 1 16:41:38 UTC 2015 - guillaume.gardet@opensuse.org
+
+- Update to 2015.10-rc4
+- Update drop-marvell.patch
+
+-------------------------------------------------------------------
+Sat Sep 12 12:22:53 UTC 2015 - guillaume@opensuse.org
+
+- Use u-boot-2015.10-rc3.tar.bz2 package provided on FTP instead of
+ packaging it manually.
+
+-------------------------------------------------------------------
+Tue Sep 8 08:52:56 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2015.10-rc3
+
+-------------------------------------------------------------------
+Wed Sep 2 16:28:02 UTC 2015 - guillaume@opensuse.org
+
+- Add odroid and odroid-xu3
+
+-------------------------------------------------------------------
+Tue Aug 18 08:31:48 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2015.10-rc2
+- Remove upstreamed patch:
+ * jetson-tk1-gpu-1.patch
+ * jetson-tk1-gpu-2.patch
+
+-------------------------------------------------------------------
+Thu Aug 6 12:40:58 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2015.10-rc1
+- Remove upstreamed patch:
+ * mx53loco-bootscr.patch
+- Update patches:
+ * jetson-tk1-gpu-1.patch
+ * jetson-tk1-gpu-2.patch
+
+-------------------------------------------------------------------
+Wed Aug 5 13:36:45 UTC 2015 - dmueller@suse.com
+
+- add mx6cuboxi
+
+-------------------------------------------------------------------
+Wed Jul 22 22:38:23 UTC 2015 - afaerber@suse.de
+
+- jetson-tk1-gpu-1.patch,
+ jetson-tk1-gpu-2.patch: Enable the Tegra124 GPU device tree node
+
+-------------------------------------------------------------------
+Mon Jul 20 10:45:39 UTC 2015 - afaerber@suse.de
+
+- Add u-boot-jetson-tk1
+
+-------------------------------------------------------------------
+Fri Jul 17 06:42:37 UTC 2015 - afaerber@suse.de
+
+- Add u-boot-merriia80optimus
+
+-------------------------------------------------------------------
+Wed Jul 15 13:05:24 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2015.07
+
+-------------------------------------------------------------------
+Tue Jun 30 07:34:49 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2015.07-rc3
+- Remove upstreamed patches:
+ * enable_spl_ext_support_for_ti_armv7.patch
+ * fix_slow_mmc_on_rpi.patch
+
+-------------------------------------------------------------------
+Thu Jun 18 12:07:10 UTC 2015 - guillaume@opensuse.org
+
+- Add fix_slow_mmc_on_rpi.patch to speed up MMC load on RPi
+- Rework patches (to be upstreamable):
+ * enable_spl_ext_support_for_ti_armv7.patch
+ * mx53loco-bootscr.patch
+- Remove fix_beagle_spl_build.patch
+
+-------------------------------------------------------------------
+Wed Jun 10 10:07:23 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2015.07-rc2
+- Update drop-marvell.patch
+
+-------------------------------------------------------------------
+Wed May 27 10:07:49 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2015.07-rc1:
+- Update drop-marvell.patch
+- Remove no more needed add_snow_usb_boot.patch
+
+-------------------------------------------------------------------
+Wed Apr 29 07:51:25 UTC 2015 - dmueller@suse.com
+
+- adjust copyright headers
+
+-------------------------------------------------------------------
+Thu Apr 16 08:34:11 UTC 2015 - guillaume@opensuse.org
++++ 723 more lines (skipped)
++++ between /dev/null
++++ and /work/SRC/openSUSE:Factory/.u-boot.new/u-boot-orangepipc.changes
--- /work/SRC/openSUSE:Factory/u-boot/u-boot-paz00.changes 2015-12-01 09:19:13.000000000 +0100
+++ /work/SRC/openSUSE:Factory/.u-boot.new/u-boot-paz00.changes 2015-12-21 12:04:45.000000000 +0100
@@ -1,0 +2,24 @@
+Tue Dec 15 09:27:03 UTC 2015 - guillaume@opensuse.org
+
+- Backport U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
+ to fix bootdelay on Beaglebone board
+
+-------------------------------------------------------------------
+Tue Dec 15 09:15:30 UTC 2015 - guillaume@opensuse.org
+
+- Add orangepi_pc board
+
+-------------------------------------------------------------------
+Fri Dec 11 09:23:17 UTC 2015 - guillaume@opensuse.org
+
+- Add support to am57xx_evm (beagle_x15 with u-boot DT)
+
+-------------------------------------------------------------------
+Fri Dec 11 09:08:25 UTC 2015 - guillaume@opensuse.org
+
+- Update to 2016.01-rc2:
+- Rename 'beagle_x15' to 'am57xx_evm_nodt' to follow upstream
+- Remove upstreamed patch:
+ * U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch
+
+-------------------------------------------------------------------
u-boot-pcm051rev3.changes: same change
u-boot-rpi.changes: same change
u-boot-rpi2.changes: same change
u-boot-snow.changes: same change
u-boot-spring.changes: same change
u-boot.changes: same change
Old:
----
U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch
u-boot-2016.01-rc1.tar.bz2
u-boot-beaglex15.changes
u-boot-beaglex15.spec
New:
----
U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
u-boot-2016.01-rc2.tar.bz2
u-boot-am57xxevm.changes
u-boot-am57xxevm.spec
u-boot-am57xxevmnodt.changes
u-boot-am57xxevmnodt.spec
u-boot-orangepipc.changes
u-boot-orangepipc.spec
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ u-boot-a10-olinuxino-lime.spec ++++++
--- /var/tmp/diff_new_pack.UMv0Pj/_old 2015-12-21 12:04:49.000000000 +0100
+++ /var/tmp/diff_new_pack.UMv0Pj/_new 2015-12-21 12:04:49.000000000 +0100
@@ -25,10 +25,10 @@
%define cuboxi_spl 0
# archive_version differs from version for RC version only
-%define archive_version 2016.01-rc1
+%define archive_version 2016.01-rc2
Name: u-boot-a10-olinuxino-lime
-Version: 2016.01~rc1
+Version: 2016.01~rc2
Release: 0
Summary: The u-boot firmware for the a10-olinuxino-lime arm platform
License: GPL-2.0
@@ -37,8 +37,8 @@
Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{archive_version}.tar.bz2
Source2: arndale-bl1.img
Source300: u-boot-rpmlintrc
-# PATCH-FIX-UPSTREAM Fix build for beagle x15
-Patch1: U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch
+# Backport UPSTREAM patch: Fix bootdelay on Beaglebone board
+Patch1: U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
# Marvell boards support is non-free licensed, and we don't need it (bnc#773824)
Patch99: drop-marvell.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-build
u-boot-a13-olinuxino.spec: same change
u-boot-a13-olinuxinom.spec: same change
u-boot-a20-olinuxino-lime.spec: same change
u-boot-a20-olinuxino-lime2.spec: same change
u-boot-a20-olinuxinomicro.spec: same change
u-boot-am335xevm.spec: same change
++++++ u-boot-am57xxevm.spec ++++++
#
# spec file for package u-boot-am57xxevm
#
# Copyright (c) 2015 SUSE LINUX GmbH, Nuernberg, Germany.
# Copyright (c) 2010 Texas Instruments Inc by Nishanth Menon
# Copyright (c) 2007-2010 by Silvan Calarco
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via http://bugs.opensuse.org/
#
%define x_loader 0
%define origen_spl 0
%define sunxi_spl 0
%define arndale_spl 0
%define cuboxi_spl 0
# archive_version differs from version for RC version only
%define archive_version 2016.01-rc2
Name: u-boot-am57xxevm
Version: 2016.01~rc2
Release: 0
Summary: The u-boot firmware for the am57xxevm arm platform
License: GPL-2.0
Group: System/Boot
Url: http://www.denx.de/wiki/U-Boot
Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{archive_version}.tar.bz2
Source2: arndale-bl1.img
Source300: u-boot-rpmlintrc
# Backport UPSTREAM patch: Fix bootdelay on Beaglebone board
Patch1: U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
# Marvell boards support is non-free licensed, and we don't need it (bnc#773824)
Patch99: drop-marvell.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-build
# Arndale board need DTC >= 1.4
BuildRequires: bc
BuildRequires: dtc >= 1.4.0
Provides: u-boot-loader
Conflicts: otherproviders(u-boot-loader)
%if %x_loader == 1
Obsoletes: x-loader-am57xxevm
Provides: x-loader-am57xxevm
%endif
ExclusiveArch: armv7l armv7hl
%description
Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors.
This package contains the firmware for the am57xxevm arm platform.
%package doc
Summary: Documentation for the u-boot Firmware
Group: Documentation/Other
%description doc
Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors.
This package contains documentation for u-boot firmware
%prep
%setup -q -n u-boot-%{archive_version}
%patch1 -p1
# is non-free licensed, and we don't need it (bnc#773824)
rm -rf board/Marvell
%patch99 -p1
%build
make %{?jobs:-j %jobs} CFLAGS="$RPM_OPT_FLAGS" am57xx_evm_defconfig
make %{?jobs:-j %jobs} CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
%if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
# Chromebook ARM (snow) and HP Chromebook 11 (spring) need a uImage format
export TEXT_START=$(awk '$NF == "_start" { printf "0x"$1 }' System.map)
./tools/mkimage -A arm -O linux -T kernel -C none -a $TEXT_START -e $TEXT_START -n uboot -d u-boot-dtb.bin u-boot.img
%endif
%install
%if "%{name}" == "u-boot-jetson-tk1"
# tegra-uboot-flasher needs several intermediate files, under their original name.
for f in u-boot u-boot.dtb u-boot-dtb-tegra.bin u-boot-nodtb-tegra.bin; do
install -D -m 0644 $f %{buildroot}/boot/$f
done
%else
# Some times u-boot needs a dtb to configure itself appended to the binary.
# In that case prefer the one with a working dtb already appended.
if [ -f u-boot-dtb-tegra.bin ]; then
install -D -m 0644 u-boot-dtb-tegra.bin %{buildroot}/boot/u-boot.bin
elif [ -f u-boot-dtb.bin ]; then
install -D -m 0644 u-boot-dtb.bin %{buildroot}/boot/u-boot.bin
else
install -D -m 0644 u-boot.bin %{buildroot}/boot/u-boot.bin
fi
%endif
%if %x_loader == 1
install -D -m 0755 MLO %{buildroot}/boot/MLO
%endif
%if %origen_spl == 1
install -D -m 0755 spl/origen-spl.bin %{buildroot}/boot/origen-spl.bin
%endif
%if %arndale_spl == 1
install -D -m 0755 spl/arndale-spl.bin %{buildroot}/boot/arndale-spl.bin
install -D -m 0755 %{SOURCE2} %{buildroot}/boot/arndale-bl1.img
%endif
%if %sunxi_spl == 1
install -D -m 0755 spl/sunxi-spl.bin %{buildroot}/boot/sunxi-spl.bin
install -D -m 0755 u-boot-sunxi-with-spl.bin %{buildroot}/boot/u-boot-sunxi-with-spl.bin
%endif
%if %cuboxi_spl == 1
install -D -m 0755 SPL %{buildroot}/boot/cuboxi-spl.bin
%endif
%files
%defattr(-,root,root)
/boot/*
%doc Licenses/gpl-2.0.txt README
%files doc
%defattr(-,root,root)
# Generic documents
%doc doc/README.JFFS2 doc/README.JFFS2_NAND doc/README.commands
%doc doc/README.autoboot doc/README.commands doc/README.console doc/README.dns
%doc doc/README.hwconfig doc/README.nand doc/README.NetConsole doc/README.serial_multi
%doc doc/README.SNTP doc/README.standalone doc/README.update doc/README.usb
%doc doc/README.video doc/README.VLAN doc/README.silent doc/README.POST doc/README.Modem
# Copy some useful kermit scripts as well
%doc tools/kermit/dot.kermrc tools/kermit/flash_param tools/kermit/send_cmd tools/kermit/send_image
# Now any h/w dependent Documentation
%doc doc/README.ARM-memory-map
%changelog
++++++ u-boot-am57xxevmnodt.spec ++++++
#
# spec file for package u-boot-am57xxevmnodt
#
# Copyright (c) 2015 SUSE LINUX GmbH, Nuernberg, Germany.
# Copyright (c) 2010 Texas Instruments Inc by Nishanth Menon
# Copyright (c) 2007-2010 by Silvan Calarco
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via http://bugs.opensuse.org/
#
%define x_loader 0
%define origen_spl 0
%define sunxi_spl 0
%define arndale_spl 0
%define cuboxi_spl 0
# archive_version differs from version for RC version only
%define archive_version 2016.01-rc2
Name: u-boot-am57xxevmnodt
Version: 2016.01~rc2
Release: 0
Summary: The u-boot firmware for the am57xxevmnodt arm platform
License: GPL-2.0
Group: System/Boot
Url: http://www.denx.de/wiki/U-Boot
Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{archive_version}.tar.bz2
Source2: arndale-bl1.img
Source300: u-boot-rpmlintrc
# Backport UPSTREAM patch: Fix bootdelay on Beaglebone board
Patch1: U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
# Marvell boards support is non-free licensed, and we don't need it (bnc#773824)
Patch99: drop-marvell.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-build
# Arndale board need DTC >= 1.4
BuildRequires: bc
BuildRequires: dtc >= 1.4.0
Provides: u-boot-loader
Conflicts: otherproviders(u-boot-loader)
%if %x_loader == 1
Obsoletes: x-loader-am57xxevmnodt
Provides: x-loader-am57xxevmnodt
%endif
ExclusiveArch: armv7l armv7hl
%description
Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors.
This package contains the firmware for the am57xxevmnodt arm platform.
%package doc
Summary: Documentation for the u-boot Firmware
Group: Documentation/Other
%description doc
Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors.
This package contains documentation for u-boot firmware
%prep
%setup -q -n u-boot-%{archive_version}
%patch1 -p1
# is non-free licensed, and we don't need it (bnc#773824)
rm -rf board/Marvell
%patch99 -p1
%build
make %{?jobs:-j %jobs} CFLAGS="$RPM_OPT_FLAGS" am57xx_evm_nodt_defconfig
make %{?jobs:-j %jobs} CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
%if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
# Chromebook ARM (snow) and HP Chromebook 11 (spring) need a uImage format
export TEXT_START=$(awk '$NF == "_start" { printf "0x"$1 }' System.map)
./tools/mkimage -A arm -O linux -T kernel -C none -a $TEXT_START -e $TEXT_START -n uboot -d u-boot-dtb.bin u-boot.img
%endif
%install
%if "%{name}" == "u-boot-jetson-tk1"
# tegra-uboot-flasher needs several intermediate files, under their original name.
for f in u-boot u-boot.dtb u-boot-dtb-tegra.bin u-boot-nodtb-tegra.bin; do
install -D -m 0644 $f %{buildroot}/boot/$f
done
%else
# Some times u-boot needs a dtb to configure itself appended to the binary.
# In that case prefer the one with a working dtb already appended.
if [ -f u-boot-dtb-tegra.bin ]; then
install -D -m 0644 u-boot-dtb-tegra.bin %{buildroot}/boot/u-boot.bin
elif [ -f u-boot-dtb.bin ]; then
install -D -m 0644 u-boot-dtb.bin %{buildroot}/boot/u-boot.bin
else
install -D -m 0644 u-boot.bin %{buildroot}/boot/u-boot.bin
fi
%endif
%if %x_loader == 1
install -D -m 0755 MLO %{buildroot}/boot/MLO
%endif
%if %origen_spl == 1
install -D -m 0755 spl/origen-spl.bin %{buildroot}/boot/origen-spl.bin
%endif
%if %arndale_spl == 1
install -D -m 0755 spl/arndale-spl.bin %{buildroot}/boot/arndale-spl.bin
install -D -m 0755 %{SOURCE2} %{buildroot}/boot/arndale-bl1.img
%endif
%if %sunxi_spl == 1
install -D -m 0755 spl/sunxi-spl.bin %{buildroot}/boot/sunxi-spl.bin
install -D -m 0755 u-boot-sunxi-with-spl.bin %{buildroot}/boot/u-boot-sunxi-with-spl.bin
%endif
%if %cuboxi_spl == 1
install -D -m 0755 SPL %{buildroot}/boot/cuboxi-spl.bin
%endif
%files
%defattr(-,root,root)
/boot/*
%doc Licenses/gpl-2.0.txt README
%files doc
%defattr(-,root,root)
# Generic documents
%doc doc/README.JFFS2 doc/README.JFFS2_NAND doc/README.commands
%doc doc/README.autoboot doc/README.commands doc/README.console doc/README.dns
%doc doc/README.hwconfig doc/README.nand doc/README.NetConsole doc/README.serial_multi
%doc doc/README.SNTP doc/README.standalone doc/README.update doc/README.usb
%doc doc/README.video doc/README.VLAN doc/README.silent doc/README.POST doc/README.Modem
# Copy some useful kermit scripts as well
%doc tools/kermit/dot.kermrc tools/kermit/flash_param tools/kermit/send_cmd tools/kermit/send_image
# Now any h/w dependent Documentation
%doc doc/README.ARM-memory-map
%changelog
++++++ u-boot-arndale.spec ++++++
--- /var/tmp/diff_new_pack.UMv0Pj/_old 2015-12-21 12:04:49.000000000 +0100
+++ /var/tmp/diff_new_pack.UMv0Pj/_new 2015-12-21 12:04:49.000000000 +0100
@@ -25,10 +25,10 @@
%define cuboxi_spl 0
# archive_version differs from version for RC version only
-%define archive_version 2016.01-rc1
+%define archive_version 2016.01-rc2
Name: u-boot-arndale
-Version: 2016.01~rc1
+Version: 2016.01~rc2
Release: 0
Summary: The u-boot firmware for the arndale arm platform
License: GPL-2.0
@@ -37,8 +37,8 @@
Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{archive_version}.tar.bz2
Source2: arndale-bl1.img
Source300: u-boot-rpmlintrc
-# PATCH-FIX-UPSTREAM Fix build for beagle x15
-Patch1: U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch
+# Backport UPSTREAM patch: Fix bootdelay on Beaglebone board
+Patch1: U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
# Marvell boards support is non-free licensed, and we don't need it (bnc#773824)
Patch99: drop-marvell.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-build
u-boot-bananapi.spec: same change
u-boot-colibrit20.spec: same change
u-boot-cubieboard.spec: same change
u-boot-cubieboard2.spec: same change
u-boot-cubietruck.spec: same change
u-boot-firefly-rk3288.spec: same change
u-boot-highbank.spec: same change
u-boot-jetson-tk1.spec: same change
u-boot-melea1000.spec: same change
u-boot-merriia80optimus.spec: same change
u-boot-mx53loco.spec: same change
++++++ u-boot-mx6cuboxi.spec ++++++
--- /var/tmp/diff_new_pack.UMv0Pj/_old 2015-12-21 12:04:49.000000000 +0100
+++ /var/tmp/diff_new_pack.UMv0Pj/_new 2015-12-21 12:04:49.000000000 +0100
@@ -25,10 +25,10 @@
%define cuboxi_spl 1
# archive_version differs from version for RC version only
-%define archive_version 2016.01-rc1
+%define archive_version 2016.01-rc2
Name: u-boot-mx6cuboxi
-Version: 2016.01~rc1
+Version: 2016.01~rc2
Release: 0
Summary: The u-boot firmware for the mx6cuboxi arm platform
License: GPL-2.0
@@ -37,8 +37,8 @@
Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{archive_version}.tar.bz2
Source2: arndale-bl1.img
Source300: u-boot-rpmlintrc
-# PATCH-FIX-UPSTREAM Fix build for beagle x15
-Patch1: U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch
+# Backport UPSTREAM patch: Fix bootdelay on Beaglebone board
+Patch1: U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
# Marvell boards support is non-free licensed, and we don't need it (bnc#773824)
Patch99: drop-marvell.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-build
++++++ u-boot-mx6qsabrelite.spec ++++++
--- /var/tmp/diff_new_pack.UMv0Pj/_old 2015-12-21 12:04:49.000000000 +0100
+++ /var/tmp/diff_new_pack.UMv0Pj/_new 2015-12-21 12:04:49.000000000 +0100
@@ -25,10 +25,10 @@
%define cuboxi_spl 0
# archive_version differs from version for RC version only
-%define archive_version 2016.01-rc1
+%define archive_version 2016.01-rc2
Name: u-boot-mx6qsabrelite
-Version: 2016.01~rc1
+Version: 2016.01~rc2
Release: 0
Summary: The u-boot firmware for the mx6qsabrelite arm platform
License: GPL-2.0
@@ -37,8 +37,8 @@
Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{archive_version}.tar.bz2
Source2: arndale-bl1.img
Source300: u-boot-rpmlintrc
-# PATCH-FIX-UPSTREAM Fix build for beagle x15
-Patch1: U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch
+# Backport UPSTREAM patch: Fix bootdelay on Beaglebone board
+Patch1: U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
# Marvell boards support is non-free licensed, and we don't need it (bnc#773824)
Patch99: drop-marvell.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-build
u-boot-odroid-xu3.spec: same change
u-boot-odroid.spec: same change
u-boot-omap3beagle.spec: same change
u-boot-omap4panda.spec: same change
++++++ u-boot-orangepipc.spec ++++++
#
# spec file for package u-boot-orangepipc
#
# Copyright (c) 2015 SUSE LINUX GmbH, Nuernberg, Germany.
# Copyright (c) 2010 Texas Instruments Inc by Nishanth Menon
# Copyright (c) 2007-2010 by Silvan Calarco
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via http://bugs.opensuse.org/
#
%define x_loader 0
%define origen_spl 0
%define sunxi_spl 0
%define arndale_spl 0
%define cuboxi_spl 0
# archive_version differs from version for RC version only
%define archive_version 2016.01-rc2
Name: u-boot-orangepipc
Version: 2016.01~rc2
Release: 0
Summary: The u-boot firmware for the orangepipc arm platform
License: GPL-2.0
Group: System/Boot
Url: http://www.denx.de/wiki/U-Boot
Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{archive_version}.tar.bz2
Source2: arndale-bl1.img
Source300: u-boot-rpmlintrc
# Backport UPSTREAM patch: Fix bootdelay on Beaglebone board
Patch1: U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
# Marvell boards support is non-free licensed, and we don't need it (bnc#773824)
Patch99: drop-marvell.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-build
# Arndale board need DTC >= 1.4
BuildRequires: bc
BuildRequires: dtc >= 1.4.0
Provides: u-boot-loader
Conflicts: otherproviders(u-boot-loader)
%if %x_loader == 1
Obsoletes: x-loader-orangepipc
Provides: x-loader-orangepipc
%endif
ExclusiveArch: armv7l armv7hl
%description
Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors.
This package contains the firmware for the orangepipc arm platform.
%package doc
Summary: Documentation for the u-boot Firmware
Group: Documentation/Other
%description doc
Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors.
This package contains documentation for u-boot firmware
%prep
%setup -q -n u-boot-%{archive_version}
%patch1 -p1
# is non-free licensed, and we don't need it (bnc#773824)
rm -rf board/Marvell
%patch99 -p1
%build
make %{?jobs:-j %jobs} CFLAGS="$RPM_OPT_FLAGS" orangepi_pc_defconfig
make %{?jobs:-j %jobs} CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes
%if "%{name}" == "u-boot-snow" || "%{name}" == "u-boot-spring"
# Chromebook ARM (snow) and HP Chromebook 11 (spring) need a uImage format
export TEXT_START=$(awk '$NF == "_start" { printf "0x"$1 }' System.map)
./tools/mkimage -A arm -O linux -T kernel -C none -a $TEXT_START -e $TEXT_START -n uboot -d u-boot-dtb.bin u-boot.img
%endif
%install
%if "%{name}" == "u-boot-jetson-tk1"
# tegra-uboot-flasher needs several intermediate files, under their original name.
for f in u-boot u-boot.dtb u-boot-dtb-tegra.bin u-boot-nodtb-tegra.bin; do
install -D -m 0644 $f %{buildroot}/boot/$f
done
%else
# Some times u-boot needs a dtb to configure itself appended to the binary.
# In that case prefer the one with a working dtb already appended.
if [ -f u-boot-dtb-tegra.bin ]; then
install -D -m 0644 u-boot-dtb-tegra.bin %{buildroot}/boot/u-boot.bin
elif [ -f u-boot-dtb.bin ]; then
install -D -m 0644 u-boot-dtb.bin %{buildroot}/boot/u-boot.bin
else
install -D -m 0644 u-boot.bin %{buildroot}/boot/u-boot.bin
fi
%endif
%if %x_loader == 1
install -D -m 0755 MLO %{buildroot}/boot/MLO
%endif
%if %origen_spl == 1
install -D -m 0755 spl/origen-spl.bin %{buildroot}/boot/origen-spl.bin
%endif
%if %arndale_spl == 1
install -D -m 0755 spl/arndale-spl.bin %{buildroot}/boot/arndale-spl.bin
install -D -m 0755 %{SOURCE2} %{buildroot}/boot/arndale-bl1.img
%endif
%if %sunxi_spl == 1
install -D -m 0755 spl/sunxi-spl.bin %{buildroot}/boot/sunxi-spl.bin
install -D -m 0755 u-boot-sunxi-with-spl.bin %{buildroot}/boot/u-boot-sunxi-with-spl.bin
%endif
%if %cuboxi_spl == 1
install -D -m 0755 SPL %{buildroot}/boot/cuboxi-spl.bin
%endif
%files
%defattr(-,root,root)
/boot/*
%doc Licenses/gpl-2.0.txt README
%files doc
%defattr(-,root,root)
# Generic documents
%doc doc/README.JFFS2 doc/README.JFFS2_NAND doc/README.commands
%doc doc/README.autoboot doc/README.commands doc/README.console doc/README.dns
%doc doc/README.hwconfig doc/README.nand doc/README.NetConsole doc/README.serial_multi
%doc doc/README.SNTP doc/README.standalone doc/README.update doc/README.usb
%doc doc/README.video doc/README.VLAN doc/README.silent doc/README.POST doc/README.Modem
# Copy some useful kermit scripts as well
%doc tools/kermit/dot.kermrc tools/kermit/flash_param tools/kermit/send_cmd tools/kermit/send_image
# Now any h/w dependent Documentation
%doc doc/README.ARM-memory-map
%changelog
++++++ u-boot-paz00.spec ++++++
--- /var/tmp/diff_new_pack.UMv0Pj/_old 2015-12-21 12:04:49.000000000 +0100
+++ /var/tmp/diff_new_pack.UMv0Pj/_new 2015-12-21 12:04:49.000000000 +0100
@@ -25,10 +25,10 @@
%define cuboxi_spl 0
# archive_version differs from version for RC version only
-%define archive_version 2016.01-rc1
+%define archive_version 2016.01-rc2
Name: u-boot-paz00
-Version: 2016.01~rc1
+Version: 2016.01~rc2
Release: 0
Summary: The u-boot firmware for the paz00 arm platform
License: GPL-2.0
@@ -37,8 +37,8 @@
Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{archive_version}.tar.bz2
Source2: arndale-bl1.img
Source300: u-boot-rpmlintrc
-# PATCH-FIX-UPSTREAM Fix build for beagle x15
-Patch1: U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch
+# Backport UPSTREAM patch: Fix bootdelay on Beaglebone board
+Patch1: U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
# Marvell boards support is non-free licensed, and we don't need it (bnc#773824)
Patch99: drop-marvell.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-build
u-boot-pcm051rev3.spec: same change
u-boot-rpi.spec: same change
u-boot-rpi2.spec: same change
u-boot-snow.spec: same change
u-boot-spring.spec: same change
++++++ u-boot.spec ++++++
--- /var/tmp/diff_new_pack.UMv0Pj/_old 2015-12-21 12:04:49.000000000 +0100
+++ /var/tmp/diff_new_pack.UMv0Pj/_new 2015-12-21 12:04:49.000000000 +0100
@@ -19,10 +19,10 @@
# 'archive_version' differs from 'version' for RC version only
-%define archive_version 2016.01-rc1
+%define archive_version 2016.01-rc2
Name: u-boot
-Version: 2016.01~rc1
+Version: 2016.01~rc2
Release: 0
Summary: Tools for the u-boot Firmware
License: GPL-2.0
++++++ U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch ++++++
From patchwork Sat Dec 12 09:27:08 2015
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [U-Boot] am335x_evm: Don't undef CONFIG_BOOTDELAY
From: matwey.kornilov@gmail.com
X-Patchwork-Id: 555979
Message-Id: <1449912428-3715-1-git-send-email-matwey.kornilov@gmail.com>
To: u-boot@lists.denx.de,
trini@ti.com
Cc: "Matwey V. Kornilov"
Date: Sat, 12 Dec 2015 12:27:08 +0300
config_distro_defaults.h is already included in configs/ti_am335x_common.h (by means of ti_armv7_common.h)
We don't need to #undef CONFIG_BOOTDELAY because it drops default bootdelay which already defined on this line.
Signed-off-by: Matwey V. Kornilov
---
include/configs/am335x_evm.h | 4 ----
1 file changed, 4 deletions(-)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index c51db8c..cf6a606 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -18,10 +18,6 @@
#include
-/* Don't override the distro default bootdelay */
-#undef CONFIG_BOOTDELAY
-#include
-
#ifndef CONFIG_SPL_BUILD
#ifndef CONFIG_FIT
# define CONFIG_FIT
++++++ pre_checkin.sh ++++++
--- /var/tmp/diff_new_pack.UMv0Pj/_old 2015-12-21 12:04:50.000000000 +0100
+++ /var/tmp/diff_new_pack.UMv0Pj/_new 2015-12-21 12:04:50.000000000 +0100
@@ -7,7 +7,7 @@
armv6_boards="rpi"
# TI
-armv7_boards="omap3_beagle omap4_panda am335x_evm pcm051_rev3 beagle_x15"
+armv7_boards="omap3_beagle omap4_panda am335x_evm pcm051_rev3 am57xx_evm am57xx_evm_nodt"
# Exynos
armv7_boards="$armv7_boards arndale snow spring odroid odroid-xu3"
# Calxeda
@@ -18,6 +18,7 @@
armv7_boards="$armv7_boards Bananapi Cubieboard Cubieboard2 Cubietruck Mele_A1000 Merrii_A80_Optimus"
armv7_boards="$armv7_boards A10-OLinuXino-Lime A13-OLinuXino A13-OLinuXinoM"
armv7_boards="$armv7_boards A20-OLinuXino-Lime A20-OLinuXino-Lime2 A20-OLinuXino_MICRO"
+armv7_boards="$armv7_boards orangepi_pc"
# Broadcom
armv7_boards="$armv7_boards rpi_2"
# Nvidia
++++++ u-boot-2016.01-rc1.tar.bz2 -> u-boot-2016.01-rc2.tar.bz2 ++++++
/work/SRC/openSUSE:Factory/u-boot/u-boot-2016.01-rc1.tar.bz2 /work/SRC/openSUSE:Factory/.u-boot.new/u-boot-2016.01-rc2.tar.bz2 differ: char 11, line 1
++++++ u-boot.spec.in ++++++
--- /var/tmp/diff_new_pack.UMv0Pj/_old 2015-12-21 12:04:50.000000000 +0100
+++ /var/tmp/diff_new_pack.UMv0Pj/_new 2015-12-21 12:04:50.000000000 +0100
@@ -25,10 +25,10 @@
%define cuboxi_spl CUBOXI_SPL
# archive_version differs from version for RC version only
-%define archive_version 2016.01-rc1
+%define archive_version 2016.01-rc2
Name: u-boot-BOARDNAME
-Version: 2016.01~rc1
+Version: 2016.01~rc2
Release: 0
Summary: The u-boot firmware for the BOARDNAME arm platform
License: GPL-2.0
@@ -37,8 +37,8 @@
Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{archive_version}.tar.bz2
Source2: arndale-bl1.img
Source300: u-boot-rpmlintrc
-# PATCH-FIX-UPSTREAM Fix build for beagle x15
-Patch1: U-Boot-1-2-usb-host-xhci-omap-fix-build-break.patch
+# Backport UPSTREAM patch: Fix bootdelay on Beaglebone board
+Patch1: U-Boot-am335x_evm-Don-t-undef-CONFIG_BOOTDELAY.patch
# Marvell boards support is non-free licensed, and we don't need it (bnc#773824)
Patch99: drop-marvell.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-build