Hello community,
here is the log from the commit of package kiwi for openSUSE:Factory
checked in at Mon Aug 22 10:16:32 CEST 2011.
--------
--- kiwi/kiwi.changes 2011-08-12 11:25:40.000000000 +0200
+++ /mounts/work_src_done/STABLE/kiwi/kiwi.changes 2011-08-19 17:39:31.000000000 +0200
@@ -1,0 +2,104 @@
+Fri Aug 19 17:33:27 CEST 2011 - ms@suse.de
+
+- v4.94.3 released
+
+-------------------------------------------------------------------
+Fri Aug 19 17:30:33 CEST 2011 - ms@suse.de
+
+- don't remove netcfg from boot images. This would remove the
+ etc/hosts file which might be required. Along with this change
+ also fixed the cleanupResolvConf() function which has to
+ reset the needResolvConf and needHosts flags in order to prevent
+ a deletion at a later point in time (bnc #713158)
+
+-------------------------------------------------------------------
+Fri Aug 19 16:47:26 CEST 2011 - ms@suse.de
+
+- don't call restoreCDRootData() and restoreSplitExtend()
+ inside the global destructor of the KIWIImageCreator.
+ If the functions are applied to the creation of a boot
+ image it leads to errors because they are designed to
+ operate on the system image root tree
+
+-------------------------------------------------------------------
+Fri Aug 19 15:11:56 CEST 2011 - ms@suse.de
+
+- removed broken state setup in KIWILog which was used to detect
+ whether we need a CR when printing the line or not. All that
+ sucked and caused mystery empty lines in the log
+
+-------------------------------------------------------------------
+Fri Aug 19 10:48:03 CEST 2011 - ms@suse.de
+
+- make sure loop maps are closed before installing grub. Also
+ changed the way grub is called. We are creating a file with
+ the commands first and then call grub ... --batch < file.
+ It makes the code more readable and also allows to include
+ the commands as part of the log file
+
+-------------------------------------------------------------------
+Thu Aug 18 15:49:29 CEST 2011 - ms@suse.de
+
+- fixed zero timeout value handling in syslinux. A value of zero
+ disables the timeout so we set the smallest possible value in
+ that case which is 1/10sec
+
+-------------------------------------------------------------------
+Thu Aug 18 15:45:47 CEST 2011 - ms@suse.de
+
+- increased amount of spare space 1.1 -> 1.5
+
+-------------------------------------------------------------------
+Thu Aug 18 15:45:11 CEST 2011 - ms@suse.de
+
+- fixed evaluation of which output
+
+-------------------------------------------------------------------
+Thu Aug 18 13:11:20 CEST 2011 - ms@suse.de
+
+- apply check for partitioner capabilities only for boot image
+ types which actually use a partitioner; netboot and oemboot
+
+-------------------------------------------------------------------
+Wed Aug 17 15:32:19 CEST 2011 - ms@suse.de
+
+- added pxe image type for s390 JeOS template
+
+-------------------------------------------------------------------
+Wed Aug 17 15:16:11 CEST 2011 - ms@suse.de
+
+- added more useful repo path for s390 netboot
+
+-------------------------------------------------------------------
+Wed Aug 17 15:13:41 CEST 2011 - ms@suse.de
+
+- added support for netboot on s390, still _experimental_ !
+
+-------------------------------------------------------------------
+Wed Aug 17 13:45:07 CEST 2011 - ms@suse.de
+
+- changed ddn() function to also check for the '_' separator
+ between the device and partition name
+
+-------------------------------------------------------------------
+Wed Aug 17 10:29:25 CEST 2011 - ms@suse.de
+
+- fixed this path evaluation in build operation mode
+
+-------------------------------------------------------------------
+Wed Aug 17 08:31:45 CEST 2011 - ms@suse.de
+
+- allow boottimeout of 0sec, also set the same default timeout
+ of 10sec for the ext|syslinux setup
+
+-------------------------------------------------------------------
+Tue Aug 16 18:08:46 CEST 2011 - ms@suse.de
+
+- reduced amount of spare space 1.5 -> 1.1
+
+-------------------------------------------------------------------
+Tue Aug 16 12:58:41 CEST 2011 - ms@suse.de
+
+- fixed suse-11.4/suse-min-gnome package list
+
+-------------------------------------------------------------------
calling whatdependson for head-i586
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ kiwi.spec ++++++
--- /var/tmp/diff_new_pack.fmJIMc/_old 2011-08-22 10:13:24.000000000 +0200
+++ /var/tmp/diff_new_pack.fmJIMc/_new 2011-08-22 10:13:24.000000000 +0200
@@ -69,7 +69,7 @@
%endif
%endif
Summary: OpenSuSE - KIWI Image System
-Version: 4.94.2
+Version: 4.94.3
Release: 1
Group: System/Management
License: GPLv2
@@ -221,7 +221,7 @@
Marcus Schaefer