openSUSE Commits

Download

commit@lists.opensuse.org

June 2009

1 participants
769 discussions

commit yast2-samba-client for openSUSE:Factory
by root＠Hilbert.suse.de 29 Jun '09

29 Jun '09

Hello community, here is the log from the commit of package yast2-samba-client for openSUSE:Factory checked in at Mon Jun 29 17:47:27 CEST 2009. -------- --- yast2-samba-client/yast2-samba-client.changes 2008-11-06 16:30:16.000000000 +0100 +++ yast2-samba-client/yast2-samba-client.changes 2009-06-26 15:27:51.000000000 +0200 @@ -1,0 +2,13 @@ +Fri Jun 26 15:02:54 CEST 2009 - jsuchome(a)suse.cz + +- manual installation of 32bit packages packages no longer needed + (bnc#354164) +- 2.18.1 + +------------------------------------------------------------------- +Fri Jun 5 13:52:34 CEST 2009 - jsuchome(a)suse.cz + +- fixed architecture dependent packages for PPC (bnc#505263) +- 2.18.0 + +------------------------------------------------------------------- calling whatdependson for head-i586 Old: ---- yast2-samba-client-2.17.11.tar.bz2 New: ---- yast2-samba-client-2.18.1.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ yast2-samba-client.spec ++++++ --- /var/tmp/diff_new_pack.yV1225/_old 2009-06-29 17:45:12.000000000 +0200 +++ /var/tmp/diff_new_pack.yV1225/_new 2009-06-29 17:45:12.000000000 +0200 @@ -1,7 +1,7 @@ # -# spec file for package yast2-samba-client (Version 2.17.11) +# spec file for package yast2-samba-client (Version 2.18.1) # -# Copyright (c) 2008 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2009 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -19,13 +19,13 @@ Name: yast2-samba-client -Version: 2.17.11 +Version: 2.18.1 Release: 1 -License: GPL v2 or later -Group: System/YaST BuildRoot: %{_tmppath}/%{name}-%{version}-build -Source0: yast2-samba-client-2.17.11.tar.bz2 +Source0: yast2-samba-client-2.18.1.tar.bz2 Prefix: /usr +Group: System/YaST +License: GPL v2 or later BuildRequires: perl-XML-Writer update-desktop-files yast2-devtools yast2-pam yast2-perl-bindings yast2-testsuite Requires: yast2-kerberos-client perl-XML-LibXML # new Pam.ycp API @@ -39,14 +39,8 @@ This package contains the YaST2 component for configuration of an SMB workgroup/domain and authentication against an SMB domain. - - -Authors: --------- - Stanislav Visnovsky <visnov(a)suse.cz> - %prep -%setup -n yast2-samba-client-2.17.11 +%setup -n yast2-samba-client-2.18.1 %build %{prefix}/bin/y2tool y2autoconf @@ -56,7 +50,9 @@ export CXXFLAGS="$RPM_OPT_FLAGS -DNDEBUG" %{?suse_update_config:%{suse_update_config -f}} ./configure --libdir=%{_libdir} --prefix=%{prefix} --mandir=%{_mandir} -make %{?jobs:-j%jobs} +# V=1: verbose build in case we used AM_SILENT_RULES(yes) +# so that RPM_OPT_FLAGS check works +make %{?jobs:-j%jobs} V=1 %install make install DESTDIR="$RPM_BUILD_ROOT" @@ -84,493 +80,3 @@ /usr/share/YaST2/schema/autoyast/rnc/samba-client.rnc %doc %{prefix}/share/doc/packages/yast2-samba-client %changelog -* Thu Nov 06 2008 jsuchome(a)suse.cz -- note services that should be restarted after installation - (bnc#395402) -- 2.17.11 -* Wed Oct 29 2008 jsuchome(a)suse.cz -- fixed reading /etc/security/pam_winbind.conf (bnc#433210) -- do not restart dbus from YaST (bnc#395402) -- 2.17.10 -* Wed Oct 15 2008 jsuchome(a)suse.cz -- updated help text for pam_mount configuration -- offer "user=%%(DOMAIN_USER)" as a default option value (bnc#433845) -- 2.17.9 -* Mon Oct 13 2008 jsuchome(a)suse.cz -- enable pam_mount module for PAM (bnc#433845) -- do not use tmp config files for leaving domain (bnc#433836) -- check for nil value of .process.read -- restart of dbus is back (there's no reload) -- 2.17.8 -* Thu Sep 25 2008 jsuchome(a)suse.cz -- do not restart dbus service, reload it (bnc#429520) -- 2.17.7 -* Thu Sep 18 2008 jsuchome(a)suse.cz -- added help text for pam_mount table -- use correct, not temporary pam_mount.conf.xml file -- 2.17.6 -* Tue Sep 16 2008 jsuchome(a)suse.cz -- install pam_mount package (for fate#300967) -- 2.17.5 -* Fri Sep 12 2008 jsuchome(a)suse.cz -- added generic dialog for editing 'volume' entries of - pam_mount.conf.xml (fate#300967) -- 2.17.4 -* Tue Sep 09 2008 jsuchome(a)suse.cz -- merged texts from proofread -- 2.17.3 -* Fri Sep 05 2008 jsuchome(a)suse.cz -- fixed writing /etc/nsswitch.conf -- ag_pam_mount: added path to reading specific file elements -- preliminary support for reading pam_mount.conf.xml -- 2.17.2 -* Wed Aug 13 2008 jsuchome(a)suse.cz -- added option to use WINS for hosts resolution (fate#300971) -- obsoleted .background agent replaced with .process -- 2.17.1 -* Fri Jun 06 2008 jsuchome(a)suse.cz -- check for KDE4's kdm when saving DISPLAYMANAGER_AD_INTEGRATION - (bnc#392122) -- 2.17.0 -* Tue Jun 03 2008 jsuchome(a)suse.cz -- correctly quote the 'net join' command (bnc#396070) -- 2.16.9 -* Fri May 16 2008 jsrain(a)suse.cz -- added categories Settings and System into desktop file - (bnc #382778) -* Tue Apr 29 2008 jsuchome(a)suse.cz -- save smb.conf when winbind is off (better fix for bnc#383374) -- 2.16.8 -* Fri Apr 25 2008 jsuchome(a)suse.cz -- correctly create machine account: transform DN, use correct - argument, do not try with default value (bnc#383360) -- use temporary krb5.conf also for obtaining machine accounts -- remove AD info from smb.conf when domain was left (bnc#383374) -- 2.16.7 -* Thu Apr 24 2008 jsuchome(a)suse.cz -- text fixes (bnc#383229) -- 2.16.6 -* Fri Apr 11 2008 jsuchome(a)suse.cz -- added button for leaving AD domain (fate#300458) -- 2.16.5 -* Wed Apr 09 2008 jsuchome(a)suse.cz -- enable specifying of the machine account (fate#301320) -- 2.16.4 -* Wed Apr 02 2008 jsuchome(a)suse.cz -- enable single sign-on for SSH (fate #303415) -* Fri Mar 28 2008 jsuchome(a)suse.cz -- do not check for required packages during Read (bnc#374703) -- SambaConfig: do not create the hash by referencing inside -- 2.16.3 -* Mon Mar 17 2008 jsrain(a)suse.cz -- added 'StartupNotify=true' to the desktop file (bnc #304964) -* Mon Jan 21 2008 jsuchome(a)suse.cz -- if nmbstatus output is not available, do a nmblookup query to - check if we are dealing with a workgroup or domain (#251909) -- 2.16.2 -* Mon Dec 03 2007 jsuchome(a)suse.cz -- merged texts from proofread -* Mon Nov 05 2007 jsuchome(a)suse.cz -- adapted helptext for home directories (#208475) -- 2.16.1 -* Fri Oct 19 2007 jsuchome(a)suse.cz -- clear nscd cache instead of restarting nscd (#333305) -- 2.16.0 -* Thu Aug 02 2007 jsuchome(a)suse.cz -- show error popup when installation of required packages fails - (#296677) -- 2.15.11 -* Thu Jul 19 2007 jsuchome(a)suse.cz -- do not offer disabling DHCP changes of hostname when - it is already disabled (#292996) -- 2.15.10 -* Tue Jun 19 2007 jsuchome(a)suse.cz -- added support for Smart Card (F302132): pkinit section in krb.conf -- 2.15.9 -* Wed Jun 06 2007 jsuchome(a)suse.cz -- do not offer installation of samba-winbind when winbind is not - used for authentication (#281383) -- 2.15.8 -* Wed May 30 2007 jsuchome(a)suse.cz -- added help text for DHCP support (F120090) -- removed Browse button (#240045) -- 2.15.7 -* Thu May 17 2007 jsuchome(a)suse.cz -- fix deleting shares from smb.conf (#264834) -- 2.15.6 -* Tue Mar 27 2007 jsuchome(a)suse.cz -- after joining during installation ask user if DHCLIENT_SET_HOSTNAME - should be set to "no" (#169260) -- autoyast support for disabling DHCLIENT_SET_HOSTNAME -- 2.15.5 -* Tue Mar 13 2007 jsuchome(a)suse.cz -- added site-aware search for AD controllers (#253609) -- 2.15.4 -* Thu Mar 08 2007 jsuchome(a)suse.cz -- added support for DHCP (F120090) -- 2.15.3 -* Tue Jan 16 2007 jsuchome(a)suse.cz -- added missing schema file for autoyast (#235316) -- 2.15.2 -* Tue Jan 09 2007 jsuchome(a)suse.cz -- install samba-client before reading smb.conf (#229246) -- 2.15.1 -* Tue Dec 19 2006 jsuchome(a)suse.cz -- Expert Settings Popup for uid and gid ranges (F301518) -- SambaConfig: export modified entries only in config mode -- 2.15.0 -* Thu Nov 30 2006 jsuchome(a)suse.cz -- install architecture-specific packages (#224418) -- prevent 'net' asking for root's pw (#225224) -- 2.14.4 -* Mon Nov 06 2006 jsuchome(a)suse.cz -- use correct AD domain name for joining (#214463, #214641) -- give NTP client module information about server (#215645) -- 2.14.3 -* Mon Oct 30 2006 jsuchome(a)suse.cz -- offer the option to run NTP confiuration (#215645) -- 2.14.2 -* Mon Oct 30 2006 jsuchome(a)suse.cz -- save smb.conf during autoinstallation (#188864) -- read realm during write instead of import -- export all modified shares from SambaConfig -- fixed writing in command line mode (#207268) -- 2.14.1 -* Fri Aug 25 2006 jsuchome(a)suse.cz -- adapted for pam-config usage (F300956) -- API of PamSettings module is obsolete -- 2.14.0 -* Wed Aug 23 2006 jsuchome(a)suse.cz -- new checkbox for Guest Access to shares (#144787) -- added more options for autoyast (#188917) -- 2.13.25 -* Mon Aug 21 2006 jsuchome(a)suse.cz -- autoyast: join to domain during Write, not during Import (#188917) -- 2.13.24 -* Wed Jun 28 2006 jsuchome(a)suse.cz -- fixed key names used for joining during autoinstallation (#188864) -- 2.13.23 -* Thu Jun 22 2006 jsuchome(a)suse.cz -- restart also zmd after dbus (#174589) -- 2.13.22 -* Tue Jun 20 2006 jsuchome(a)suse.cz -- restart D-BUS after nscd (#174589) -- 2.13.21 -* Mon Jun 19 2006 jsuchome(a)suse.cz -- show info about services to restart (#174589) -- 2.13.20 -* Thu Jun 08 2006 jsuchome(a)suse.cz -- set the "template shell" value also for non-AD domain (#176222) -- 2.13.19 -* Wed Apr 26 2006 jsuchome(a)suse.cz -- use tmp samba config file for joining as workaround for #168300 -- do not remove workgroup key when AD is not used -- use "domain" value for "security" key for non-AD setups (#168300) -- 2.13.18 -* Wed Apr 19 2006 jsuchome(a)suse.cz -- fixed Import/Export for keys in /etc/security/pam_winbind.conf -- 2.13.17 -* Wed Apr 19 2006 jsuchome(a)suse.cz -- skip reading of pam_winbind if it was read before - (-> and fix the failing testsuite of yast2-samba-server) -- 2.13.16 -* Thu Apr 13 2006 jsuchome(a)suse.cz -- use /etc/security/pam_winbind.conf for winbind config (#165775) -- 2.13.15 -* Wed Mar 29 2006 jsuchome(a)suse.cz -- fixed dig call (#158726) -- 2.13.14 -* Mon Mar 27 2006 jsuchome(a)suse.cz -- stop services automatically with only 1 section in smb.conf (#160517) -- 2.13.13 -* Fri Mar 17 2006 jsuchome(a)suse.cz -- restart smb and nmb if they are running (#143908) -* Thu Mar 16 2006 jsuchome(a)suse.cz -- do not write "use kerberos keytab" (#154951) -- quote group name (#143908) -- fix dialog during installation (#158314) -- 2.13.12 -* Thu Mar 16 2006 jsuchome(a)suse.cz -- restart nscd (#157902) -- adapt smbconf agent to accept special characters -- change group ownership if directory with shares already exists -- changed Shares frame label to better fit samba-server needs -- flush nscd cache (#157902) -- 2.13.11 -* Mon Mar 13 2006 jsuchome(a)suse.cz -- split of shares write function to be used by yast2-samba-server -- 2.13.10 -* Mon Mar 13 2006 jsuchome(a)suse.cz -- set 'users' group as default shares group owner -- start (and stop) smb and nmb services (#143908) -- 2.13.9 -* Fri Mar 10 2006 jsuchome(a)suse.cz -- implement support for user shares (#143908, F300444) -- 2.13.8 -* Thu Mar 09 2006 jsuchome(a)suse.cz -- changed texts to use Windows -- 2.13.8 -* Wed Mar 08 2006 jsuchome(a)suse.cz -- correctly save boolean value to Kerberos module (#155716) -- write the new values to smb.conf even when some are present (#155716) -- adapt "domain logons" and "domain master" values for AD (#155716) -* Tue Feb 28 2006 jsuchome(a)suse.cz -- offline authentication checkbox (#143927) -- 2.13.6 -* Thu Feb 02 2006 jsuchome(a)suse.cz -- show "Create Home" checkbox during installation (#147596) -- save pam_winbind.so to /etc/pam.d/common-password (#146189) - (and revert behaviour introduced by #146653) -- 2.13.5 -* Mon Jan 30 2006 jsuchome(a)suse.cz -- install samba-winbind at the same time as kerberos packages (#145256) -- set also password value in /etc/security/pam_unix2.conf (#146653) -- removed tmp path to /etc/pam.d file -- more initialization for getting the status (#143911) -- 2.13.4 -* Mon Jan 30 2006 jsuchome(a)suse.cz -- added checkbox for creating directories (#143519) -- added status line, saying if machine is joined (#143911) -- 2.13.3 -* Fri Jan 27 2006 jsuchome(a)suse.cz -- merged in proofread texts -* Fri Jan 06 2006 jsuchom e(a)suse.cz -- used DISPLAYMANAGER_AD_INTEGRATION instead of KDM_GREETER (#139338) -- 2.13.2 -* Tue Dec 20 2005 jsuchome(a)suse.cz -- added autoyast support for joining and AD -- saved KDM_GREETER value for special greeter with winbind (#139338) -* Mon Dec 19 2005 jsuchome(a)suse.cz -- added support for multiple keys in smb.conf (#138555) -- 2.13.1 -* Thu Dec 15 2005 jsuchome(a)suse.cz -- winbind options are now set in smb.conf -* Wed Dec 14 2005 jsuchome(a)suse.cz -- AD support: - use temporary config file for kerberos during join - install kerberos packages - do not save "mappings" to kerberos config file - use 'net LOOKUP DC' for searching the server -- initial support for disabling nscd (#137793) -- initial support for enabling FAM (#118196) -* Thu Dec 01 2005 jsuchome(a)suse.cz -- support joining AD domains (F122007) -- 2.13.0 -* Thu Aug 04 2005 jsuchome(a)suse.cz -- 2.12.4 -* Tue Aug 02 2005 locilka(a)suse.cz -- Calling SetModified when adjusting the Share (#93840) -* Mon Aug 01 2005 jsuchome(a)suse.cz -- unified searching popup (#66591) -- 2.12.3 -* Thu Jun 23 2005 visnov(a)suse.cz -- applied proofread texts -* Mon Apr 25 2005 mlazar(a)suse.cz -- 2.12.2 -* Fri Mar 04 2005 mlazar(a)suse.cz -- 2.12.1 -- ycp tests replaced (and extended) with perl tests -* Fri Mar 04 2005 mlazar(a)suse.cz -- SambaConfig.pm: - * removed config2all(), Config2All() - * [Share]SetModified() now return false if modified flag alrady set - * added UnsetModified() - * Dump() display configuration in smb.conf-like format - * Import() support also hashes (for easer testing) -- SambaNetJoin.pm: better tests exit status -- SambaNmbLookup.pm: - * global variables changed from 'my' to 'our' (for testing) - * better test exit status - * GetAvailableDomains/Neighbours() now return sorted list -* Fri Mar 04 2005 mlazar(a)suse.cz -- 2.12.1 -- SambaConfig.pm: fixed handling with comments in Read() and Write() -- SambaNmbLookup.pm: fixed checking nmb status -- SambaWinbind.pm: fixed AdjustNsswitch() and AdjustPam() -- updated testsuites -* Tue Mar 01 2005 mlazar(a)suse.cz -- 2.12.0 -- fixed bug 66892: insufficiently informative error popup -* Fri Feb 18 2005 mlazar(a)suse.cz -- 2.11.4 -- fixed testsuites -- SambaConfig.pm: fixed Export/Import (see #50736) -* Thu Feb 17 2005 mlazar(a)suse.cz -- internal key "_commentout" replaced by "_disabled" -- run nmbstatus as user nobody -* Wed Feb 16 2005 mlazar(a)suse.cz -- do not export undefined values -* Wed Feb 16 2005 mlazar(a)suse.cz -- 2.11.3 -- internal values are not exported (see bug #50736) -- fixed importing/exporting unconfigured data -* Thu Jan 27 2005 mlazar(a)suse.cz -- 2.11.2 -* Thu Jan 27 2005 mlazar(a)suse.cz -- fixed testsuites -* Tue Jan 25 2005 mlazar(a)suse.cz -- Progress::on()/off() replaced with Progress::set() -* Fri Jan 21 2005 mlazar(a)suse.cz -- 2.11.1 -* Wed Dec 29 2004 mlazar(a)suse.cz -- fixed setting undefined values in SambaConfig.pm -* Mon Dec 20 2004 mlazar(a)suse.cz -- fix for abort during user module -* Fri Nov 19 2004 mlazar(a)suse.cz -- avoid computed arguments in sformat() -* Mon Nov 08 2004 mlazar(a)suse.cz -- 2.11.0 -- Samba.ycp transformed to perl and splited to SambaConfig.pm, - SambaNetJoin.pm, SambaNmbLookup.pm and SambawWinbind.pm -- adapted testsuite -* Mon Sep 13 2004 mlazar(a)suse.cz -- 2.10.5 -* Fri Sep 10 2004 mlazar(a)suse.cz -- samba-winbind installed only when need -* Thu Sep 09 2004 mlazar(a)suse.cz -- Required replaced by PackageSystem (see bug 30872) -* Mon Sep 06 2004 mlazar(a)suse.cz -- fixed typo -* Mon Sep 06 2004 mlazar(a)suse.cz -- Added GetModified, SetModified for autoyast -- 2.10.4 -* Mon Aug 30 2004 mlazar(a)suse.cz -- 2.10.3 -- fixed Bug 44284 - Samba authentication allows to disable the authentication -* Thu Aug 19 2004 mlazar(a)suse.cz -- Fixed return value for CommandLine::Run() -* Wed Aug 18 2004 mlazar(a)suse.cz -- Fixed Back button for installation sequence -- Modified .etc.smb agent -- 2.10.2 -* Tue Aug 03 2004 jsuchome(a)suse.cz -- Added Back and Next buttons for installation sequence -- 2.10.1 -* Wed Jun 16 2004 visnov(a)suse.cz -- fixed testsuite -- 2.10.0 -* Thu May 13 2004 visnov(a)suse.cz -- always provide user/password when joining domain (#40439) -- 2.9.17 -* Tue Apr 27 2004 visnov(a)suse.cz -- enhance API for the new UI -- 2.9.16 -* Wed Apr 21 2004 visnov(a)suse.cz -- really return password from dialog (#38996) -- 2.9.15 -* Mon Apr 19 2004 visnov(a)suse.cz -- don't stop nscd when enabling winbind (suggested by lmuelle(a)suse.de) -- fix testsuite -- 2.9.14 -* Tue Apr 06 2004 visnov(a)suse.cz -- stop nmbd temporarily for nmbstatus (#38452) -- 2.9.13 -* Fri Apr 02 2004 visnov(a)suse.cz -- YaST is GPL now -- 2.9.12 -* Fri Apr 02 2004 visnov(a)suse.cz -- don't try to read netbios name (#37942) -- 2.9.11 -* Mon Mar 29 2004 visnov(a)suse.cz -- fixed warning -- 2.9.10 -* Thu Mar 18 2004 visnov(a)suse.cz -- restart winbind if already running (#35356) -- update nmbstatus info if available (#36394) -- 2.9.9 -* Mon Mar 15 2004 visnov(a)suse.cz -- compilation fix -- 2.9.7 -* Wed Mar 10 2004 sh(a)suse.de -- V 2.9.7 -- Fixed OpenDialog() / SetIcon() sequence -* Mon Mar 08 2004 visnov(a)suse.cz -- add yast2-installation to NFB -- set wizard icon -- 2.9.6 -* Thu Mar 04 2004 visnov(a)suse.cz -- also install samba-winbind (#35343) -* Mon Mar 01 2004 visnov(a)suse.cz -- merged back proofread texts -- use Sequencer -- fix types -- 2.9.5 -* Wed Feb 18 2004 jsuchome(a)suse.cz -- added possibility to call ShortSummary function from auto-client -* Wed Feb 18 2004 visnov(a)suse.cz -- 2.9.4 -* Wed Feb 11 2004 visnov(a)suse.cz -- drop /etc/sysconfig/samba support - does not exist anymore -* Mon Feb 09 2004 visnov(a)suse.cz -- disable nscd if winbind should be activated -- show "domain" flag in the list of available domains -* Mon Feb 09 2004 visnov(a)suse.cz -- use "idmap uid/gid" instead of "winbind uid/gid" -- use "net join" instead of "smbpasswd -j" -- use "net testjoin" instead of "wbinfo -t" -- allow domain joining if nmbstatus not found -- fix #33583: can't join domain with special chars in Administrator-pwd -- drop y2cc -- 2.9.3 -* Fri Jan 30 2004 visnov(a)suse.cz -- remove "global" keyword -- fix command line support -* Fri Jan 30 2004 visnov(a)suse.cz -- first version for the new interpreter -- 2.9.2 -* Wed Oct 29 2003 visnov(a)suse.cz -- adapted testsuite -- 2.9.1 -* Thu Oct 02 2003 jsuchome(a)suse.cz -- adapted to new Autologin interface -- 2.9.0 -* Wed Sep 24 2003 visnov(a)suse.cz -- sync settings to disk before trying to join domain (#31722 - - samba-client can't join domain) -- 2.8.11 -* Tue Sep 23 2003 jsuchome(a)suse.cz -- disable autologin when winbind is enabled (#31470) -- 2.8.10 -* Wed Sep 17 2003 visnov(a)suse.de -- we require "samba-client", not "samba" package -- 2.8.9 -* Tue Sep 09 2003 visnov(a)suse.de -- #30300: don't misinform user about required apache2 package -- 2.8.8 -* Mon Sep 08 2003 nashif(a)suse.de -- #30291: return list of required package for autoyast -* Mon Sep 08 2003 visnov(a)suse.de -- fixed autoyast problems (similar to #30161) -- 2.8.6 -* Fri Sep 05 2003 visnov(a)suse.de -- merged in proofread texts -- 2.8.5 -* Thu Sep 04 2003 visnov(a)suse.de -- restart nscd after starting winbind -* Tue Sep 02 2003 visnov(a)suse.de -- try harder to stop temporary winbind -* Tue Sep 02 2003 visnov(a)suse.de -- fix syntax errors -- fix domain joining (pass user instead of password) -* Tue Sep 02 2003 visnov(a)suse.de -- do not start winbind if host not in a domain -* Mon Sep 01 2003 visnov(a)suse.de -- fix helps, labels (style guide) -- 2.8.4 -* Mon Aug 25 2003 visnov(a)suse.de -- 2.8.3 -* Thu Aug 21 2003 visnov(a)suse.de -- show error dialog if required packages are not installed before quit -* Wed Aug 20 2003 visnov(a)suse.de -- Do not show Initializing... dialog -* Mon Aug 11 2003 visnov(a)suse.de -- added desktop file -- merged in proofread texts -- 2.8.2 -* Wed Jul 30 2003 visnov(a)suse.de -- start nmbstatus as soon as possible -* Mon Jul 28 2003 visnov(a)suse.de -- support for call_modules option in pam_unix2.conf -- 2.8.1 -* Thu May 29 2003 visnov(a)suse.cz -- initial version ++++++ yast2-samba-client-2.17.11.tar.bz2 -> yast2-samba-client-2.18.1.tar.bz2 ++++++ ++++ 3947 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-samba-client-2.17.11/autodocs-ycp.ami new/yast2-samba-client-2.18.1/autodocs-ycp.ami --- old/yast2-samba-client-2.17.11/autodocs-ycp.ami 1970-01-01 01:00:00.000000000 +0100 +++ new/yast2-samba-client-2.18.1/autodocs-ycp.ami 2009-06-26 15:03:18.000000000 +0200 @@ -0,0 +1,32 @@ +# -*- makefile -*- Automake include file +# $Id: autodocs-ycp.ami 57644 2009-06-19 08:38:11Z mvidner $ + +# Builds source documentation for YCP sources +# Uses ycpdoc +# PARAMETERS: +# AUTODOCS_YCP: Files that the ycp autodocs is built from +# Optional - the default is $(srcdir)/../../src/*.ycp +# AUTODOCS_PM: Files that the perl autodocs is built from +# Optional - the default is $(srcdir)/../../src/*.pm +# AUTODOCS_SUBDIR: To install the result to $(docdir)/SUBDIR/autodocs +# Optional - the default is no subdir, $(docdir)/autodocs +# AUTODOCS_STRIP: Strip it from filenames. The remaining / are replaced by __ +# Optional - the default is $(srcdir)/../../src + +htmldir = $(docdir)/$(AUTODOCS_SUBDIR)/autodocs + +html_DATA = index.html $(filter-out index.html, $(wildcard *.html)) +CLEANFILES = $(html_DATA) pod2htm*.tmp + +AUTODOCS_YCP ?= $(wildcard $(srcdir)/../../src/*.ycp) +AUTODOCS_PM ?= $(wildcard $(srcdir)/../../src/*.pm) +AUTODOCS_STRIP ?= $(srcdir)/../../src + +index.html: $(AUTODOCS_YCP) $(AUTODOCS_PM) +#including *.pm, for the index + ${YCPDOC} -d. -s$(AUTODOCS_STRIP) $(AUTODOCS_YCP) + for i in $(AUTODOCS_PM); do \ + b=$${i##$(AUTODOCS_STRIP)}; b=$${b#/}; b=$${b//\//__}; b=$${b%.pm}; \ + pod2html --title=$$b --infile=$$i --outfile=$$b.html; \ + echo "<a href='$$b.html'>$${b/__/::}</a>" > $$b.mod.html; \ + done diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-samba-client-2.17.11/configure.in new/yast2-samba-client-2.18.1/configure.in --- old/yast2-samba-client-2.17.11/configure.in 2008-08-14 14:06:33.000000000 +0200 +++ new/yast2-samba-client-2.18.1/configure.in 2009-06-26 15:03:17.000000000 +0200 @@ -1,9 +1,9 @@ dnl configure.in for yast2-samba-client dnl -dnl -- This file is generated by y2autoconf 2.16.8 - DO NOT EDIT! -- +dnl -- This file is generated by y2autoconf 2.18.9 - DO NOT EDIT! -- dnl (edit configure.in.in instead) -AC_INIT(yast2-samba-client, 2.17.1, http://bugs.opensuse.org/, yast2-samba-client) +AC_INIT(yast2-samba-client, 2.18.1, http://bugs.opensuse.org/, yast2-samba-client) dnl Check for presence of file 'RPMNAME' AC_CONFIG_SRCDIR([RPMNAME]) @@ -18,7 +18,7 @@ AM_INIT_AUTOMAKE(tar-ustar -Wno-portability) dnl Important YaST2 variables -VERSION="2.17.1" +VERSION="2.18.1" RPMNAME="yast2-samba-client" MAINTAINER="Jiri Suchomel <jsuchome(a)suse.cz>" diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-samba-client-2.17.11/doc/autodocs/Makefile.am new/yast2-samba-client-2.18.1/doc/autodocs/Makefile.am --- old/yast2-samba-client-2.17.11/doc/autodocs/Makefile.am 2005-09-08 10:32:46.000000000 +0200 +++ new/yast2-samba-client-2.18.1/doc/autodocs/Makefile.am 2009-06-23 17:56:07.000000000 +0200 @@ -2,11 +2,5 @@ # Makefile.am for devtools/devtools/skeletons/config/doc/autodocs # -htmldir = $(docdir)/autodocs +include $(top_srcdir)/autodocs-ycp.ami -index.html: $(srcdir)/../../src/*.ycp - $(ybindir)/ycpdoc -d. $(srcdir)/../../src/*.ycp - -html_DATA = index.html $(wildcard *.html) - -CLEANFILES = $(html_DATA) diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-samba-client-2.17.11/Makefile.am new/yast2-samba-client-2.18.1/Makefile.am --- old/yast2-samba-client-2.17.11/Makefile.am 2008-08-14 14:06:33.000000000 +0200 +++ new/yast2-samba-client-2.18.1/Makefile.am 2009-06-26 15:03:18.000000000 +0200 @@ -32,10 +32,10 @@ # less strict; prefer bzip2 AUTOMAKE_OPTIONS = foreign dist-bzip2 no-dist-gzip -# where devtools instal m4 snippets +# where devtools install m4 snippets # argh, executed literally #ACLOCAL_AMFLAGS = -I $(Y2DEVTOOLS_PREFIX)/share/aclocal -ACLOCAL_AMFLAGS = -I `if test -d ./devtools/admin; then echo ./devtools/admin; else pkg-config --print-errors --variable=datadir yast2-devtools; fi`/aclocal +ACLOCAL_AMFLAGS = -I . -I `if test -d ./devtools/admin; then echo ./devtools/admin; else pkg-config --print-errors --variable=datadir yast2-devtools; fi`/aclocal Makefile.am.common: $(DEVTOOLS_DIR)/admin/Makefile.am.common cmp -s $< $@ || cp -f $< $@ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-samba-client-2.17.11/src/complex.ycp new/yast2-samba-client-2.18.1/src/complex.ycp --- old/yast2-samba-client-2.17.11/src/complex.ycp 2008-03-28 12:58:54.000000000 +0100 +++ new/yast2-samba-client-2.18.1/src/complex.ycp 2009-06-26 15:02:36.000000000 +0200 @@ -35,8 +35,7 @@ Wizard::RestoreHelp(HELPS["read"]:""); // check installed packages - if (!PackageSystem::CheckAndInstallPackagesInteractive( - Samba::UpdatedArchPackages (["samba-client"]))) + if (!PackageSystem::CheckAndInstallPackagesInteractive(["samba-client"])) { y2warning("package samba-client not installed"); return `abort; diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-samba-client-2.17.11/src/dialogs.ycp new/yast2-samba-client-2.18.1/src/dialogs.ycp --- old/yast2-samba-client-2.17.11/src/dialogs.ycp 2008-10-16 09:52:11.000000000 +0200 +++ new/yast2-samba-client-2.18.1/src/dialogs.ycp 2009-06-26 15:02:46.000000000 +0200 @@ -629,7 +629,6 @@ { packages = (list<string>)merge(packages,["krb5","krb5-client"]); } - packages = Samba::UpdatedArchPackages (packages); if (!Package::InstallAll (packages)) { Popup::Error (Message::FailedToInstallPackages ()); diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-samba-client-2.17.11/src/SambaWinbind.pm new/yast2-samba-client-2.18.1/src/SambaWinbind.pm --- old/yast2-samba-client-2.17.11/src/SambaWinbind.pm 2008-11-06 16:23:47.000000000 +0100 +++ new/yast2-samba-client-2.18.1/src/SambaWinbind.pm 2008-11-07 09:11:19.000000000 +0100 @@ -4,7 +4,7 @@ # Authors: Stanislav Visnovsky <visnov(a)suse.cz> # Martin Lazar <mlazar(a)suse.cz> # -# $Id: SambaWinbind.pm 52796 2008-10-31 13:38:04Z jsuchome $ +# $Id: SambaWinbind.pm 53003 2008-11-06 15:29:54Z jsuchome $ package SambaWinbind; diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-samba-client-2.17.11/src/Samba.ycp new/yast2-samba-client-2.18.1/src/Samba.ycp --- old/yast2-samba-client-2.17.11/src/Samba.ycp 2008-10-31 14:38:04.000000000 +0100 +++ new/yast2-samba-client-2.18.1/src/Samba.ycp 2009-06-26 15:02:04.000000000 +0200 @@ -4,7 +4,7 @@ * Summary: Data for configuration of samba-client, input and output functions. * Authors: Stanislav Visnovsky <visnov(a)suse.cz> * - * $Id: Samba.ycp 52796 2008-10-31 13:38:04Z jsuchome $ + * $Id: Samba.ycp 57460 2009-06-05 12:09:24Z jsuchome $ * * Representation of the configuration of samba-client. * Input and output routines. @@ -15,7 +15,6 @@ module "Samba"; textdomain "samba-client"; -import "Arch"; import "Autologin"; import "FileUtils"; import "NetworkConfig"; @@ -133,52 +132,9 @@ // original value of pam_mount_volumes, for detecting changes list<map> pam_mount_volumes_orig = nil; -// packages to install for specific arhitectures (#224418) -global map arch_packages = $[ - "krb5" : $[ - "ia64" : [ "krb5-x86" ], - "ppc64" : [ "krb5-64bit" ], - "s390_64" : [ "krb5-32bit" ], - "x86_64" : [ "krb5-32bit" ], - ], - "samba-client" : $[ - "ia64" : [ "samba-client-x86" ], - "ppc64" : [ "samba-client-64bit" ], - "s390_64" : [ "samba-client-32bit" ], - "x86_64" : [ "samba-client-32bit" ], - ], - "samba-winbind" : $[ - "ia64" : [ "samba-winbind-x86" ], - "ppc64" : [ "samba-winbind-64bit" ], - "s390_64" : [ "samba-winbind-32bit" ], - "x86_64" : [ "samba-winbind-32bit" ], - ], - "pam_mount" : $[ - "ia64" : [ "pam_mount-x86" ], - "ppc64" : [ "pam_mount-64bit" ], - "s390_64" : [ "pam_mount-32bit" ], - "x86_64" : [ "pam_mount-32bit" ], - ], -]; - // network configuration (to be read from NetworkConfig module) global map network_setup = NetworkConfig::Export (); -/** - * Return list of architecture specific packages (derived from package list - * given as parameter) merged with the packages in parameter - */ -global define list<string> UpdatedArchPackages (list<string> packages) { - - list<string> ret = packages; - string arch = Arch::architecture (); - - foreach (string package, packages, { - ret = (list<string>) union (ret, arch_packages[package,arch]:[]); - }); - return ret; -} - boolean PAMMountModified () { return @@ -1138,7 +1094,7 @@ if (SambaAD::ADS () != "") to_install = (list<string>) union (to_install, ["krb5", "krb5-client"]); return $[ - "install" : UpdatedArchPackages (to_install), + "install" : to_install, "remove" : [] ]; } diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-samba-client-2.17.11/VERSION new/yast2-samba-client-2.18.1/VERSION --- old/yast2-samba-client-2.17.11/VERSION 2008-11-06 16:23:22.000000000 +0100 +++ new/yast2-samba-client-2.18.1/VERSION 2009-06-26 15:03:16.000000000 +0200 @@ -1 +1 @@ -2.17.11 +2.18.1 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit yast2-sound for openSUSE:Factory
by root＠Hilbert.suse.de 29 Jun '09

29 Jun '09

Hello community, here is the log from the commit of package yast2-sound for openSUSE:Factory checked in at Mon Jun 29 17:45:01 CEST 2009. -------- --- yast2-sound/yast2-sound.changes 2009-04-10 15:41:21.000000000 +0200 +++ yast2-sound/yast2-sound.changes 2009-06-17 16:38:53.000000000 +0200 @@ -1,0 +2,5 @@ +Tue Jun 16 14:58:02 CEST 2009 - mvidner(a)suse.cz + +- Using autodocs-ycp.ami, which contains a fix for automake 1.11. + +------------------------------------------------------------------- calling whatdependson for head-i586 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ yast2-sound.spec ++++++ --- /var/tmp/diff_new_pack.m31898/_old 2009-06-29 17:44:43.000000000 +0200 +++ /var/tmp/diff_new_pack.m31898/_new 2009-06-29 17:44:43.000000000 +0200 @@ -20,8 +20,8 @@ Name: yast2-sound Version: 2.18.1 -Release: 1 -License: GPL v2 or later +Release: 2 +License: GPL Group: System/YaST BuildRoot: %{_tmppath}/%{name}-%{version}-build Source0: yast2-sound-2.18.1.tar.bz2 @@ -41,12 +41,6 @@ %description This package contains the YaST2 component for sound card configuration. - - -Authors: --------- - Dan Meszaros - %prep %setup -n yast2-sound-2.18.1 ++++++ yast2-sound-2.18.1.tar.bz2 ++++++ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-sound-2.18.1/agent-audio/doc/autodocs/Makefile.am new/yast2-sound-2.18.1/agent-audio/doc/autodocs/Makefile.am --- old/yast2-sound-2.18.1/agent-audio/doc/autodocs/Makefile.am 2007-05-18 12:48:55.000000000 +0200 +++ new/yast2-sound-2.18.1/agent-audio/doc/autodocs/Makefile.am 2009-06-16 14:57:35.000000000 +0200 @@ -1,13 +1,6 @@ # -# Makefile.am for .../agent-XXpkgXX/doc/autodocs +# Makefile.am for .../agent-audio/doc/autodocs # -htmldir = $(docdir)/autodocs - -html_DATA = index.html $(wildcard *.html *.png) doxygen.css @RPMNAME@.tag -CLEANFILES = $(html_DATA) doxygen.log doxygen.conf installdox - -doxygen.css @RPMNAME@.tag: index.html - -index.html: $(srcdir)/../../src/*.h - @ybindir@/ydoxygen PROJECT_NAME=@RPMNAME@ +AUTODOCS_SUBDIR=agent-audio +include $(top_srcdir)/autodocs-cc.ami diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-sound-2.18.1/agent-audio/doc/autodocs/Makefile.in new/yast2-sound-2.18.1/agent-audio/doc/autodocs/Makefile.in --- old/yast2-sound-2.18.1/agent-audio/doc/autodocs/Makefile.in 2009-04-10 15:40:03.000000000 +0200 +++ new/yast2-sound-2.18.1/agent-audio/doc/autodocs/Makefile.in 2009-06-21 13:00:57.000000000 +0200 @@ -15,9 +15,33 @@ @SET_MAKE@ # -# Makefile.am for .../agent-XXpkgXX/doc/autodocs +# Makefile.am for .../agent-audio/doc/autodocs # +# -*- makefile -*- Automake include file +# $Id: autodocs-cc.ami 28248 2006-02-21 14:14:07Z mvidner $ + +# Builds source documentation for C++ sources. +# Builds and installs by default, intended for base packages where the +# docs is useful for developers of leaf packages. + +# PARAMETERS: (additional to those of autodocs-cc-base) +# AUTODOCS_SUBDIR: htmldir will be $(docdir)/$(AUTODOCS_SUBDIR)/autodocs + +# -*- makefile -*- Automake include file +# $Id: autodocs-cc.ami 23704 2005-06-10 17:36:13Z mvidner $ + +# This is a common base for autodocs-cc-{,off}.ami +# and should NOT be used directly + +# Builds source documentation for C++ sources +# Uses doxygen (ydoxygen) +# PARAMETERS: +# AUTODOCS_CC: Directories that the C++ autodocs is built from +# Optional - the default is $(srcdir)/../../src +# AUTODOCS_DEPS: dependencies of the docs, default is $(AUTODOCS_CC)/*.h +# AUTODOCS_PARAMS: more params for ydoxygen + VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -37,8 +61,10 @@ build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/autodocs-cc-base.ami \ + $(top_srcdir)/autodocs-cc.ami subdir = agent-audio/doc/autodocs -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/libtool.m4 \ $(top_srcdir)/ltoptions.m4 $(top_srcdir)/ltsugar.m4 \ @@ -178,7 +204,7 @@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ -htmldir = $(docdir)/autodocs +htmldir = $(docdir)/$(AUTODOCS_SUBDIR)/autodocs imagedir = @imagedir@ includedir = @includedir@ infodir = @infodir@ @@ -220,12 +246,14 @@ ydatadir = @ydatadir@ yncludedir = @yncludedir@ ystartupdir = @ystartupdir@ -html_DATA = index.html $(wildcard *.html *.png) doxygen.css @RPMNAME@.tag -CLEANFILES = $(html_DATA) doxygen.log doxygen.conf installdox +AUTODOCS_SUBDIR = agent-audio +html_data = index.html $(wildcard *.html *.png) doxygen.css @RPMNAME@.tag +CLEANFILES = $(html_data) doxygen.log doxygen.conf installdox +html_DATA = $(html_data) all: all-am .SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/autodocs-cc.ami $(top_srcdir)/autodocs-cc-base.ami $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ @@ -411,10 +439,13 @@ uninstall uninstall-am uninstall-htmlDATA +AUTODOCS_CC ?= $(srcdir)/../../src +AUTODOCS_DEPS ?= $(AUTODOCS_CC)/*.h + doxygen.css @RPMNAME@.tag: index.html -index.html: $(srcdir)/../../src/*.h - @ybindir@/ydoxygen PROJECT_NAME=@RPMNAME@ +index.html: $(AUTODOCS_DEPS) + ${YDOXYGEN} PROJECT_NAME=@RPMNAME@ INPUT=$(AUTODOCS_CC) $(AUTODOCS_PARAMS) # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-sound-2.18.1/agent-audio/src/YastChannelId.cc new/yast2-sound-2.18.1/agent-audio/src/YastChannelId.cc --- old/yast2-sound-2.18.1/agent-audio/src/YastChannelId.cc 2009-01-09 10:10:56.000000000 +0100 +++ new/yast2-sound-2.18.1/agent-audio/src/YastChannelId.cc 2009-04-29 13:04:19.000000000 +0200 @@ -19,7 +19,7 @@ */ /* - File: $Id:$ + File: $Id: YastChannelId.cc 57029 2009-04-29 11:04:19Z lslezak $ Author: Ladislav Slezák <lslezak(a)novell.com> Summary: Class for converting Alsa channel name to Yast channel ID and vice versea. */ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-sound-2.18.1/agent-audio/src/YastChannelId.h new/yast2-sound-2.18.1/agent-audio/src/YastChannelId.h --- old/yast2-sound-2.18.1/agent-audio/src/YastChannelId.h 2009-01-07 13:57:29.000000000 +0100 +++ new/yast2-sound-2.18.1/agent-audio/src/YastChannelId.h 2009-04-29 13:04:19.000000000 +0200 @@ -19,7 +19,7 @@ */ /* - File: $Id:$ + File: $Id: YastChannelId.h 57029 2009-04-29 11:04:19Z lslezak $ Author: Ladislav Slezák <lslezak(a)novell.com> Summary: Class for converting Alsa channel name to Yast channel ID and vice versea. */ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-sound-2.18.1/autodocs-cc.ami new/yast2-sound-2.18.1/autodocs-cc.ami --- old/yast2-sound-2.18.1/autodocs-cc.ami 1970-01-01 01:00:00.000000000 +0100 +++ new/yast2-sound-2.18.1/autodocs-cc.ami 2009-06-21 13:00:41.000000000 +0200 @@ -0,0 +1,14 @@ +# -*- makefile -*- Automake include file +# $Id: autodocs-cc.ami 28248 2006-02-21 14:14:07Z mvidner $ + +# Builds source documentation for C++ sources. +# Builds and installs by default, intended for base packages where the +# docs is useful for developers of leaf packages. + +# PARAMETERS: (additional to those of autodocs-cc-base) +# AUTODOCS_SUBDIR: htmldir will be $(docdir)/$(AUTODOCS_SUBDIR)/autodocs + +include $(top_srcdir)/autodocs-cc-base.ami + +htmldir = $(docdir)/$(AUTODOCS_SUBDIR)/autodocs +html_DATA = $(html_data) diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-sound-2.18.1/autodocs-cc-base.ami new/yast2-sound-2.18.1/autodocs-cc-base.ami --- old/yast2-sound-2.18.1/autodocs-cc-base.ami 1970-01-01 01:00:00.000000000 +0100 +++ new/yast2-sound-2.18.1/autodocs-cc-base.ami 2009-06-21 13:00:41.000000000 +0200 @@ -0,0 +1,24 @@ +# -*- makefile -*- Automake include file +# $Id: autodocs-cc.ami 23704 2005-06-10 17:36:13Z mvidner $ + +# This is a common base for autodocs-cc-{,off}.ami +# and should NOT be used directly + +# Builds source documentation for C++ sources +# Uses doxygen (ydoxygen) +# PARAMETERS: +# AUTODOCS_CC: Directories that the C++ autodocs is built from +# Optional - the default is $(srcdir)/../../src +# AUTODOCS_DEPS: dependencies of the docs, default is $(AUTODOCS_CC)/*.h +# AUTODOCS_PARAMS: more params for ydoxygen + +AUTODOCS_CC ?= $(srcdir)/../../src +AUTODOCS_DEPS ?= $(AUTODOCS_CC)/*.h + +html_data = index.html $(wildcard *.html *.png) doxygen.css @RPMNAME@.tag +CLEANFILES = $(html_data) doxygen.log doxygen.conf installdox + +doxygen.css @RPMNAME@.tag: index.html + +index.html: $(AUTODOCS_DEPS) + ${YDOXYGEN} PROJECT_NAME=@RPMNAME@ INPUT=$(AUTODOCS_CC) $(AUTODOCS_PARAMS) diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-sound-2.18.1/autodocs-ycp.ami new/yast2-sound-2.18.1/autodocs-ycp.ami --- old/yast2-sound-2.18.1/autodocs-ycp.ami 1970-01-01 01:00:00.000000000 +0100 +++ new/yast2-sound-2.18.1/autodocs-ycp.ami 2009-06-21 13:00:41.000000000 +0200 @@ -0,0 +1,27 @@ +# -*- makefile -*- Automake include file +# $Id: autodocs-ycp.ami 33394 2006-10-13 11:51:40Z mvidner $ + +# Builds source documentation for YCP sources +# Uses ycpdoc +# PARAMETERS: +# AUTODOCS_YCP: Files that the ycp autodocs is built from +# Optional - the default is $(srcdir)/../../src/*.ycp +# AUTODOCS_PM: Files that the perl autodocs is built from +# Optional - the default is $(srcdir)/../../src/*.pm + +htmldir = $(docdir)/autodocs + +html_DATA = index.html $(wildcard *.html) +CLEANFILES = $(html_DATA) pod2htm*.tmp + +AUTODOCS_YCP ?= $(wildcard $(srcdir)/../../src/*.ycp) +AUTODOCS_PM ?= $(wildcard $(srcdir)/../../src/*.pm) + +index.html: $(AUTODOCS_YCP) $(AUTODOCS_PM) +#including *.pm, for the index + ${YCPDOC} -d. $^ + for i in $(AUTODOCS_PM); do \ + b=`basename $$i`; b=$${b%.pm}; \ + pod2html --title=$$b --infile=$$i --outfile=$$b.html; \ + echo "<a href='$$b.html'>$$b</a>" > $$b.mod.html; \ + done diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-sound-2.18.1/configure.in new/yast2-sound-2.18.1/configure.in --- old/yast2-sound-2.18.1/configure.in 2009-04-10 15:39:44.000000000 +0200 +++ new/yast2-sound-2.18.1/configure.in 2009-06-21 13:00:40.000000000 +0200 @@ -1,6 +1,6 @@ dnl configure.in for yast2-sound dnl -dnl -- This file is generated by y2autoconf 2.17.6 - DO NOT EDIT! -- +dnl -- This file is generated by y2autoconf 2.18.5 - DO NOT EDIT! -- dnl (edit configure.in.in instead) AC_INIT(yast2-sound, 2.18.1, http://bugs.opensuse.org/, yast2-sound) diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-sound-2.18.1/Makefile.am new/yast2-sound-2.18.1/Makefile.am --- old/yast2-sound-2.18.1/Makefile.am 2009-04-10 15:39:45.000000000 +0200 +++ new/yast2-sound-2.18.1/Makefile.am 2009-06-21 13:00:41.000000000 +0200 @@ -32,7 +32,7 @@ # less strict; prefer bzip2 AUTOMAKE_OPTIONS = foreign dist-bzip2 no-dist-gzip -# where devtools instal m4 snippets +# where devtools install m4 snippets # argh, executed literally #ACLOCAL_AMFLAGS = -I $(Y2DEVTOOLS_PREFIX)/share/aclocal ACLOCAL_AMFLAGS = -I . -I `if test -d ./devtools/admin; then echo ./devtools/admin; else pkg-config --print-errors --variable=datadir yast2-devtools; fi`/aclocal diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-sound-2.18.1/Makefile.in new/yast2-sound-2.18.1/Makefile.in --- old/yast2-sound-2.18.1/Makefile.in 2009-04-10 15:40:04.000000000 +0200 +++ new/yast2-sound-2.18.1/Makefile.in 2009-06-21 13:00:58.000000000 +0200 @@ -274,7 +274,7 @@ # less strict; prefer bzip2 AUTOMAKE_OPTIONS = foreign dist-bzip2 no-dist-gzip -# where devtools instal m4 snippets +# where devtools install m4 snippets # argh, executed literally #ACLOCAL_AMFLAGS = -I $(Y2DEVTOOLS_PREFIX)/share/aclocal ACLOCAL_AMFLAGS = -I . -I `if test -d ./devtools/admin; then echo ./devtools/admin; else pkg-config --print-errors --variable=datadir yast2-devtools; fi`/aclocal diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-sound-2.18.1/sound/config/Makefile.am new/yast2-sound-2.18.1/sound/config/Makefile.am --- old/yast2-sound-2.18.1/sound/config/Makefile.am 2007-05-18 12:48:55.000000000 +0200 +++ new/yast2-sound-2.18.1/sound/config/Makefile.am 2009-04-29 12:58:09.000000000 +0200 @@ -1,7 +1,7 @@ # # Makefile.am for sound/sound/config # -# $Id:$ +# $Id: Makefile.am 57028 2009-04-29 10:58:09Z lslezak $ # schemafilesdir = $(schemadir)/autoyast/rnc diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-sound-2.18.1/sound/config/Makefile.in new/yast2-sound-2.18.1/sound/config/Makefile.in --- old/yast2-sound-2.18.1/sound/config/Makefile.in 2009-04-10 15:40:04.000000000 +0200 +++ new/yast2-sound-2.18.1/sound/config/Makefile.in 2009-06-21 13:00:58.000000000 +0200 @@ -17,7 +17,7 @@ # # Makefile.am for sound/sound/config # -# $Id:$ +# $Id: Makefile.am 57028 2009-04-29 10:58:09Z lslezak $ # VPATH = @srcdir@ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-sound-2.18.1/sound/doc/autodocs/Makefile.am new/yast2-sound-2.18.1/sound/doc/autodocs/Makefile.am --- old/yast2-sound-2.18.1/sound/doc/autodocs/Makefile.am 2007-05-18 12:48:55.000000000 +0200 +++ new/yast2-sound-2.18.1/sound/doc/autodocs/Makefile.am 2009-06-16 10:05:24.000000000 +0200 @@ -1,9 +1,3 @@ # Makefile.am for YCP module .../doc/autodocs -htmldir = @docdir@/autodocs - -html_DATA = index.html $(wildcard *.html) -CLEANFILES = $(html_DATA) - -index.html: $(srcdir)/../../src/*.ycp - @ybindir@/ycpdoc -d. $(srcdir)/../../src/*.ycp +include $(top_srcdir)/autodocs-ycp.ami diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-sound-2.18.1/sound/doc/autodocs/Makefile.in new/yast2-sound-2.18.1/sound/doc/autodocs/Makefile.in --- old/yast2-sound-2.18.1/sound/doc/autodocs/Makefile.in 2009-04-10 15:40:04.000000000 +0200 +++ new/yast2-sound-2.18.1/sound/doc/autodocs/Makefile.in 2009-06-21 13:00:58.000000000 +0200 @@ -16,6 +16,17 @@ # Makefile.am for YCP module .../doc/autodocs +# -*- makefile -*- Automake include file +# $Id: autodocs-ycp.ami 33394 2006-10-13 11:51:40Z mvidner $ + +# Builds source documentation for YCP sources +# Uses ycpdoc +# PARAMETERS: +# AUTODOCS_YCP: Files that the ycp autodocs is built from +# Optional - the default is $(srcdir)/../../src/*.ycp +# AUTODOCS_PM: Files that the perl autodocs is built from +# Optional - the default is $(srcdir)/../../src/*.pm + VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -35,8 +46,9 @@ build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/autodocs-ycp.ami subdir = sound/doc/autodocs -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/libtool.m4 \ $(top_srcdir)/ltoptions.m4 $(top_srcdir)/ltsugar.m4 \ @@ -176,7 +188,7 @@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ -htmldir = @docdir@/autodocs +htmldir = $(docdir)/autodocs imagedir = @imagedir@ includedir = @includedir@ infodir = @infodir@ @@ -219,11 +231,11 @@ yncludedir = @yncludedir@ ystartupdir = @ystartupdir@ html_DATA = index.html $(wildcard *.html) -CLEANFILES = $(html_DATA) +CLEANFILES = $(html_DATA) pod2htm*.tmp all: all-am .SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/autodocs-ycp.ami $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ @@ -409,8 +421,17 @@ uninstall uninstall-am uninstall-htmlDATA -index.html: $(srcdir)/../../src/*.ycp - @ybindir@/ycpdoc -d. $(srcdir)/../../src/*.ycp +AUTODOCS_YCP ?= $(wildcard $(srcdir)/../../src/*.ycp) +AUTODOCS_PM ?= $(wildcard $(srcdir)/../../src/*.pm) + +index.html: $(AUTODOCS_YCP) $(AUTODOCS_PM) +#including *.pm, for the index + ${YCPDOC} -d. $^ + for i in $(AUTODOCS_PM); do \ + b=`basename $$i`; b=$${b%.pm}; \ + pod2html --title=$$b --infile=$$i --outfile=$$b.html; \ + echo "<a href='$$b.html'>$$b</a>" > $$b.mod.html; \ + done # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-sound-2.18.1/sound/src/PulseAudio.ycp new/yast2-sound-2.18.1/sound/src/PulseAudio.ycp --- old/yast2-sound-2.18.1/sound/src/PulseAudio.ycp 2008-11-19 12:12:27.000000000 +0100 +++ new/yast2-sound-2.18.1/sound/src/PulseAudio.ycp 2009-04-29 12:58:09.000000000 +0200 @@ -24,7 +24,7 @@ * Summary: Configuration of PulseAudio in desktop applications * Authors: Ladislav Slezák <lslezak(a)novell.com> * - * $Id:$ + * $Id: PulseAudio.ycp 57028 2009-04-29 10:58:09Z lslezak $ */ { diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-sound-2.18.1/sound.pot new/yast2-sound-2.18.1/sound.pot --- old/yast2-sound-2.18.1/sound.pot 2008-09-10 10:47:12.000000000 +0200 +++ new/yast2-sound-2.18.1/sound.pot 1970-01-01 01:00:00.000000000 +0100 @@ -1,44 +0,0 @@ -# translation of sound.po to -# Copyright (C) YEAR SuSE Linux Products GmbH, Nuernberg -# This file is distributed under the same license as the PACKAGE package. -# -# Andrew Spackman <kiwilinux(a)gmail.com>, 2008. -msgid "" -msgstr "" -"Project-Id-Version: sound\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2008-08-04 10:30+0200\n" -"PO-Revision-Date: 2008-08-28 22:05+1200\n" -"Last-Translator: Andrew Spackman <kiwilinux(a)gmail.com>\n" -"Language-Team: <en(a)li.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"X-Generator: KBabel 1.11.4\n" - -#: sound/src/sound_write.ycp:117 -#, ycp-format -msgid "" -"These required packages are not available: %1\n" -"Some sound device may not work or some features may not be supported.\n" -"\n" -"Enable or add an additional software repository containing the packages." -msgstr "" -"These required packages are not available: %1\n" -"Some sound devices may not work or some features may not be supported.\n" -"\n" -"Enable or add an additional software repository containing the packages." - -#: sound/src/texts.ycp:275 -msgid "" -"\n" -"Use Other to set the volume of the selected card or configure\n" -"the module loading for playing MIDI files (Start Sequencer).\n" -"Use Play Test Sound to test the selected card.\n" -"\n" -msgstr "" -"\n" -"Use Other to set the volume of the selected card or configure\n" -"the module loaded for playing MIDI files (Start Sequencer).\n" -"Use Play Test Sound to test the selected card.\n" -"\n" ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit yast2-sysconfig for openSUSE:Factory
by root＠Hilbert.suse.de 29 Jun '09

29 Jun '09

Hello community, here is the log from the commit of package yast2-sysconfig for openSUSE:Factory checked in at Mon Jun 29 17:44:32 CEST 2009. -------- --- yast2-sysconfig/yast2-sysconfig.changes 2008-06-16 14:29:37.000000000 +0200 +++ yast2-sysconfig/yast2-sysconfig.changes 2009-06-17 16:41:32.000000000 +0200 @@ -1,0 +2,5 @@ +Tue Jun 16 14:29:29 CEST 2009 - mvidner(a)suse.cz + +- Using autodocs-ycp.ami, which contains a fix for automake 1.11. + +------------------------------------------------------------------- calling whatdependson for head-i586 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ yast2-sysconfig.spec ++++++ --- /var/tmp/diff_new_pack.p30926/_old 2009-06-29 17:44:03.000000000 +0200 +++ /var/tmp/diff_new_pack.p30926/_new 2009-06-29 17:44:03.000000000 +0200 @@ -20,8 +20,8 @@ Name: yast2-sysconfig Version: 2.17.0 -Release: 54 -License: GPL v2 or later +Release: 55 +License: GPL Group: System/YaST BuildRoot: %{_tmppath}/%{name}-%{version}-build Source0: yast2-sysconfig-2.17.0.tar.bz2 @@ -39,13 +39,6 @@ A graphical /etc/sysconfig/* editor with integrated search and context information. - - -Authors: --------- - Michael Hager <mike(a)suse.de> - Ladislav Slezak <lslezak(a)suse.cz> - %prep %setup -n yast2-sysconfig-2.17.0 @@ -84,441 +77,4 @@ /usr/share/YaST2/data/descriptions /usr/share/YaST2/schema/autoyast/rnc/sysconfig.rnc %doc %{prefix}/share/doc/packages/yast2-sysconfig - %changelog -* Mon Jun 16 2008 lslezak(a)suse.cz -- OK/Cancel button in the main dialog (bnc#398491) -- 2.17.0 -* Fri May 16 2008 jsrain(a)suse.cz -- added categories Settings and System into desktop file - (bnc #382778) -* Mon Apr 07 2008 lslezak(a)suse.cz -- 'clear' command line option works properly (bnc#377068) -- 2.16.0 -* Mon Mar 17 2008 jsrain(a)suse.cz -- added 'StartupNotify=true' to the desktop file (bnc #304964) -* Mon May 28 2007 lslezak(a)suse.cz -- check UID after evaluating command line arguments (#269909) -- 2.15.3 -* Fri May 25 2007 jsrain(a)suse.cz -- removed outdated translations from .desktop-files (#271209) -* Wed Apr 11 2007 lslezak(a)suse.cz -- dropped yast2-powertweak subpackage (FATE #301978) -- 2.15.2 -* Fri Mar 09 2007 locilka(a)suse.cz -- Removing yast2-installation from RPM dependencies. -- 2.15.1 -* Fri Dec 08 2006 lslezak(a)suse.cz -- append a long empty string to the header text to avoid cutting - of a long text after a change (do not use UI::RecalcLayout(), - it produces flickering in ncurses UI) (#227044) -- 2.15.0 -* Mon Nov 13 2006 lslezak(a)suse.cz -- 2.14.0 -* Thu Nov 09 2006 lslezak(a)suse.cz -- added RNC schema for Autoyast profile validation (#219011) -- 2.13.8 -* Mon Jul 17 2006 lslezak(a)suse.cz -- refresh UI layout after change of the selected variable (#172356) -- ignore backup files in /etc/sysconfig directory (#177463) -- 2.13.7 -* Wed May 17 2006 lslezak(a)suse.cz -- display warning if not running as root (#171197) -- 2.13.6 -* Mon Feb 20 2006 lslezak(a)suse.cz -- updated BuildRequires (replaced yast2-devel-packages macro) -- 2.13.5 -* Mon Dec 19 2005 jsuchome(a)suse.cz -- merged proofread texts -- 2.13.4 -* Fri Dec 16 2005 lslezak(a)suse.cz -- sysconfig.ycp: added a note for translators about - splitted help text -- 2.13.3 -* Fri Dec 02 2005 lslezak(a)suse.cz -- Sysconfig::search renamed to Search (search is a built-in - function now) -- Powertweak - fixed line break in Y2CC (#135803) -- 2.13.2 -* Mon Nov 21 2005 lslezak(a)suse.cz -- redirect stdout and stderr output of restarted service to - /dev/null - do not hang at service restart (#86631) -- version 2.13.1 -* Fri Sep 23 2005 lslezak(a)suse.cz -- powerteak - wrap long description lines (#118517) -- enhanced set command (in command line mode) to accept form - VARIABLE=value, enhanced the help text (#94417) -- 2.13.0 -* Mon Sep 05 2005 lslezak(a)suse.cz -- don't install powertweak-extra package by default (#105273) -- 2.12.3 -* Tue Aug 30 2005 lslezak(a)suse.cz -- fixed dialog header in powertweak mode (#106731) -- 2.12.2 -* Thu Jul 28 2005 lslezak(a)suse.cz -- updated detktop files -- 2.12.1 -* Fri Jul 22 2005 lslezak(a)suse.cz -- updated icon in .desktop files -- 2.12.0 -* Thu Apr 21 2005 lslezak(a)suse.cz -- fixed typo in the help text (#79275) -* Wed Nov 24 2004 lslezak(a)suse.cz -- display default value or empty string instead of the current - value in aytoyast mode (#36874) -- version 2.11.3 -* Mon Nov 15 2004 lslezak(a)suse.cz -- merged commandline mode fixes from 9.1 branch: - - fixed option properties (#48133) - - added 'clear' command to set empty value ("") -- version 2.11.2 -* Wed Oct 27 2004 lslezak(a)suse.cz -- adapted to new Mode:: API -- version 2.11.1 -* Mon Oct 18 2004 lslezak(a)suse.cz -- removed help text from search dialog (#46605) -- version 2.11.0 -* Mon Sep 27 2004 lslezak(a)suse.cz -- register agent during autoinstallation (#45836) -- version 2.10.5 -* Tue Sep 14 2004 lslezak(a)suse.cz -- GetModified/SetModified functions (AutoYaST API) -- don't call Read() in Import() -- version 2.10.4 -* Mon Aug 23 2004 lslezak(a)suse.cz -- fixed datatype (value returned from command line) -- version 2.10.3 -* Wed Jun 16 2004 lslezak(a)suse.cz -- updated testsuite (use Testsuite:: module, set testedfiles) -- version 2.10.2 -* Tue Jun 15 2004 lslezak(a)suse.cz -- don't escape values in single quotes (#41984) -- version 2.10.1 -* Fri Jun 11 2004 lslezak(a)suse.cz -- read also files from /etc/sysconfig/uml/ (UML config. directory) -- version 2.10.0 -* Tue May 04 2004 lslezak(a)suse.cz -- merged proofread texts -- version 2.9.15 -* Sat Apr 03 2004 nashif(a)suse.de -- -* Fri Apr 02 2004 nashif(a)suse.de -- Adapt to use new Wizard (#37581) -- 2.9.14 -* Fri Apr 02 2004 lslezak(a)suse.cz -- changed license to GPL -- version 2.9.13 -* Fri Mar 26 2004 lslezak(a)suse.cz -- [Default] button - fixed layout problem (#36745) -- version 2.9.12 -* Thu Mar 25 2004 nashif(a)suse.de -- Dont run complete suseconfig when writing autoyast configuration -* Fri Mar 12 2004 lslezak(a)suse.cz -- use new Wizard -- use Package module -- fixed module description (#35372) -- version 2.9.11 -* Fri Mar 05 2004 lslezak(a)suse.cz -- data type fixes -- use Sequencer:: module -- version 2.9.10 -* Tue Mar 02 2004 lslezak(a)suse.cz -- don't use Product:: module -- version 2.9.9 -* Mon Mar 01 2004 lslezak(a)suse.cz -- merged proofread texts -- more strict data types (typed lists and maps) -- version 2.9.8 -* Mon Feb 23 2004 lslezak(a)suse.cz -- fixed reading values containing '=' character (#34864) -- fixed editing values with '\$' substring (#34809) -- version 2.9.7 -* Fri Feb 13 2004 lslezak(a)suse.cz -- read /etc/sysconfig/powersave/* files -- use CommandLine::Run -- NI fixes: nil checking -- version 2.9.6 -* Sun Feb 08 2004 arvin(a)suse.de -- removed config files (*.y2cc) -* Wed Feb 04 2004 lslezak(a)suse.cz -- testsuite update -- packages gcc and yast2-network are not required - or needed for build -- version 2.9.4 -* Fri Jan 30 2004 lslezak(a)suse.cz -- fixes for the new interpreter (nil checking, - data types, removed globals, build fix) -- version 2.9.3 -* Tue Jan 13 2004 lslezak(a)suse.cz -- fixes for the new interpreter -- version 2.9.2 -* Thu Dec 18 2003 lslezak(a)suse.cz -- use Service:: module instead of Runlevel:: -- removed unused imports -* Wed Nov 26 2003 lslezak(a)suse.cz -- fixes for the new interpreter -- version 2.9.1 -* Tue Nov 25 2003 lslezak(a)suse.cz -- use String::ParseOptions function -- support multiline values -* Thu Nov 13 2003 lslezak(a)suse.cz -- command line UI -- use IP:: module -- version 2.9.0 -* Thu Sep 25 2003 lslezak(a)suse.cz -- use Require module (#31673) -* Mon Sep 15 2003 lslezak(a)suse.de -- fixed empty ("") value bug (#30644) -- documentation update -- version 2.8.7 -* Fri Sep 12 2003 nashif(a)suse.de -- Dont turn Progress on in autoinst mode -* Fri Sep 12 2003 nashif(a)suse.de -- #30291: return list of required packages for autoinstallation -* Fri Aug 29 2003 lslezak(a)suse.de -- small fixes in perl parser (#29526) -- don't show empty commands in the description -- fixed 'Go to' button functionality -- powertweak mode fixes -- added missing translation marks -- version 2.8.4 -* Tue Aug 26 2003 lslezak(a)suse.de -- new metadata keyword PreSaveCommand: (#29212) -- version 2.8.3 -* Mon Aug 25 2003 lslezak(a)suse.cz -- removed "Initializing..." dialog -- version 2.8.2 -* Mon Aug 11 2003 lslezak(a)suse.de -- merged proofread texts -- version 2.8.1 -* Wed Aug 06 2003 lslezak(a)suse.cz -- use the new metadata (the activation commands) -- use Label:: and Popup:: modules instead of includes -- fixed double quote backslashing bug (character before - the double quote character was lost) -- fixed testsuites -- added .desktop files -- .spec: added yast2-installation package to Requires - and neededforbuild (Product.ycp module) -- version 2.8.0 -* Wed Mar 12 2003 lslezak(a)suse.de -- fixed undefined function call UI::ErrorMessage - (changed to UI::ErrorPopup), fixed translation -- version 2.7.12 -* Mon Mar 10 2003 lslezak(a)suse.de -- fixed ifcfg.template location, comment reading from template - (for /etc/sysconfig/network/ifcfg-* files) -- version 2.7.11 -* Wed Mar 05 2003 lslezak(a)suse.de -- ignore escaped slash in Path tag (#24571) -- remove new line characters from description in search - result dialog -- wrap lines in node description text -- don't display multiple instances of variable in one file -- version 2.7.10 -* Tue Mar 04 2003 nashif(a)suse.de -- define variable files module wide (#24494) -- renamed files to custom_files -* Thu Feb 27 2003 lslezak(a)suse.de -- ignore header in config file (#23876) -- updated testsuite -- version 2.7.9 -* Tue Feb 25 2003 lslezak(a)suse.de -- don't change comment formatting (#24205) -- testsuite updated -- version 2.7.8 -* Mon Feb 24 2003 lslezak(a)suse.de -- removed workaround for bug #23721 ("<" was not interpreted - in ncurses) -- fixed parsing and validating integer and regexp types (#24033) -- added testsuites -- added yast2-network to neededforbuild -- powertweak mode fixes -- Powermanagement path description update -- version 2.7.7 -* Mon Feb 17 2003 lslezak(a)suse.de -- convert '<', '>' to '<', '>' in richtext comment -- version 2.7.6 -* Wed Feb 05 2003 lslezak(a)suse.cz -- don't show comments after three hash characters -- added metadata documentation -- added missing 'descriptions' in *.spec -- version 2.7.5 -* Mon Feb 03 2003 lslezak(a)suse.cz -- merged proof-read texts -- bugfixes in sysconfig_auto.ycp -- version 2.7.4 -* Fri Jan 17 2003 lslezak(a)suse.cz -- export/import data in 8.1 format -- version 2.7.3 -* Thu Jan 16 2003 lslezak(a)suse.cz -- autoinstallation support -- autoinst. config mode: added "use current value" - and "add new variable..." functions -- fixed parsing metadata type value -- removed obsoleted and unused files - sysconfig_proposal.ycp and sysconfig_write.ycp -- added missing descriptions of predefined paths -- added descriptions for translatiors -- small code clean up -* Wed Jan 08 2003 lslezak(a)suse.cz -- added descriptions of predefined paths -- support for /etc/sysconfig/network/ifcfg-* files -- read network metadata from ifcg.template file -- support IPv4 and IPv6 data types -- support "variable = 'value'" lines in config files -- fixes - shortcuts, translations, ycpdoc comments -- version 2.7.2 -* Thu Nov 28 2002 lslezak(a)suse.cz -- check if new value is valid (according to specified data type) -- save modified values to files -- search in configuration files -- use metadata from previous variable if comment is missing -- powertweak subpackage is working now -- install powertweak packages on request (removed from Require:) -- version 2.7.1 -* Tue Nov 19 2002 lslezak(a)suse.cz -- removed metadata database (now part of configuration files) -- read and parse metadata -- merged with CVS head -- version 2.7.0 -* Thu Oct 03 2002 lslezak(a)suse.cz -- added possible values ("grub", "lilo") for LOADER_TYPE variable - (#20385) -- version 2.6.15 -* Fri Sep 27 2002 lslezak(a)suse.cz -- use string::size_type instead of int - fixes endless loop - at start on 64-bit architectures (#20236) -- version 2.6.14 -* Thu Sep 19 2002 lslezak(a)suse.cz -- do not start SuSEconfig after saving powertweak configuration -- version 2.6.13 -* Wed Sep 11 2002 lslezak(a)suse.cz -- fixed progress label (rc.config -> sysconfig) (#19398) -- added new metadata -- version 2.6.12 -* Fri Sep 06 2002 lslezak(a)suse.cz -- fixed metadata -- reenabled SuSEconfig after save -- do not show powertweak settings in sysconfig mode -- provide/obsolete old packages -- version 2.6.11 -* Thu Sep 05 2002 lslezak(a)suse.cz -- added new metadata -- fixed spec file - powertweak.ycp was missing -- version 2.6.10 -* Mon Sep 02 2002 lslezak(a)suse.cz -- log missing comments -- added new metadata -- added powetweak alias (allow 'yast2 powertweak') -- new icon for yast2-powertweak -- version 2.6.9 -* Tue Aug 27 2002 jsuchome(a)suse.cz -- provide/obsolete old translation packages -* Fri Aug 23 2002 lslezak(a)suse.cz -- added new metadata -- version 2.6.8 -* Fri Aug 16 2002 lslezak(a)suse.cz -- escape double quotes in values, remove redundant beginning - and trailing double quotes (#16727) -- read multi line values (#17766) -- added new metadata -- version 2.6.7 -* Wed Aug 14 2002 lslezak(a)suse.cz -- read really all files at /etc/sysconfig directory -- changed tree level separator from '/' to '$' (allows displaying - powertweak variables with '/' in name), fixed metadata scripts, - regenerated metadata file -- merged proofread text -- added script for searching missing variables in metadata file -- added new metadata -- changed maintainer to lslezak(a)suse.cz -- version 2.6.6 -* Fri Aug 09 2002 lslezak(a)suse.de -- added ycpdoc comments -- use OKButtonLabel(), Cancel...(), ... -- code cleanup - removed obsoleted functions, any type -- version 2.6.5 -* Thu Aug 08 2002 lslezak(a)suse.de -- added new meta data -- added support for /etc/sysconfig/network/wireless file -- fixed powertweak question dialog -- version 2.6.4 -* Thu Aug 01 2002 lslezak(a)suse.cz -- added powertweak support -- created yast2-powertweak subpackage -- added new entries to meta_sys.config file -- added comments for translators -- version 2.6.3 -* Fri Jul 12 2002 arvin(a)suse.de -- use proper namespace for Args and CallFunction (#16776) -* Sat Jul 06 2002 arvin(a)suse.de -- moved non binary files to /usr/share/YaST2 -* Mon Jul 01 2002 msvec(a)suse.cz -- renamed to yast2-sysconfig -- 2.6.0 -* Thu Mar 21 2002 mike(a)suse.de -- bug 13694: missing variables in sysconfig editor -* Wed Mar 20 2002 mike(a)suse.de -- ro request: bug in spec fixed -* Thu Mar 14 2002 mike(a)suse.de -- Bug 14992: sysconfig editor asks me if I wish to see the installation log -* Tue Feb 26 2002 mike(a)suse.de -- enameing from yast2-trans-rcconfig to yast2-trans-sysconfig -* Tue Feb 26 2002 mike(a)suse.de -- renameing from yast2-config-rcconfig to yast2-config-sysconfig -* Mon Feb 18 2002 mike(a)suse.de -- new libtool version was required -* Mon Feb 18 2002 mike(a)suse.de -- changes due to /etc/sysconfig and deleted firewall option -* Fri Feb 08 2002 lnussel(a)suse.de -- command line argument is of type string -* Fri Feb 08 2002 mike(a)suse.de -- changes due to /etc/sysconfig changes -* Mon Sep 24 2001 mike(a)suse.de -- fixed: broken logfile of scripts - fixed: deleted stop of pers. firewall -* Thu Sep 20 2001 mike(a)suse.de -- moved menuentry to group security -* Thu Sep 20 2001 mike(a)suse.de -- change request of draht: - for proper work, we have to start firewall2 script before personal firewall - script -* Wed Sep 19 2001 mike(a)suse.de -- added START_FW2 variable for firewall module. -- change start, stop to restart2 for firewall2 -* Tue Sep 18 2001 mike(a)suse.de -- firewall scripts started -* Fri Sep 14 2001 mike(a)suse.de -- new firewall configuration added -* Mon Sep 10 2001 lnussel(a)suse.de -- moved icon in Control Center from Group "Misc" to "System" - (Bug #10256) -* Sat Aug 11 2001 arvin(a)suse.de -- fixed for gcc 3.0 -* Wed Jul 25 2001 lnussel(a)suse.de -- ported to libstdc++, libg++ no longer necessary -* Tue May 08 2001 mike(a)suse.de -- added varaiables for 7.2, added Documentation -* Tue Apr 24 2001 jbuch(a)suse.de -- define -> global define -* Thu Mar 08 2001 curry(a)suse.de -- faster reading and processing of rc.config variables -* Fri Jan 19 2001 mike(a)suse.de -- tag a string (make it translatable) -* Thu Jan 18 2001 mike(a)suse.de -- added new 7.1 variables to database -* Mon Jan 15 2001 mike(a)suse.de -- bugfix in search -* Wed Jan 03 2001 mike(a)suse.de -- new database (added meta information) - enums allowed -* Fri Dec 15 2000 mike(a)suse.de -- new database (added meta information ) -* Wed Dec 13 2000 mike(a)suse.de -- new menuentry -* Fri Dec 08 2000 mike(a)suse.de -- fix bzip2 helptext -* Fri Dec 08 2000 mike(a)suse.de -- new module for 7.1 - graphical /etc/rc.config editor ++++++ yast2-sysconfig-2.17.0.tar.bz2 ++++++ ++++ 3102 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-sysconfig-2.17.0/autodocs-ycp.ami new/yast2-sysconfig-2.17.0/autodocs-ycp.ami --- old/yast2-sysconfig-2.17.0/autodocs-ycp.ami 1970-01-01 01:00:00.000000000 +0100 +++ new/yast2-sysconfig-2.17.0/autodocs-ycp.ami 2009-06-22 07:47:56.000000000 +0200 @@ -0,0 +1,27 @@ +# -*- makefile -*- Automake include file +# $Id: autodocs-ycp.ami 33394 2006-10-13 11:51:40Z mvidner $ + +# Builds source documentation for YCP sources +# Uses ycpdoc +# PARAMETERS: +# AUTODOCS_YCP: Files that the ycp autodocs is built from +# Optional - the default is $(srcdir)/../../src/*.ycp +# AUTODOCS_PM: Files that the perl autodocs is built from +# Optional - the default is $(srcdir)/../../src/*.pm + +htmldir = $(docdir)/autodocs + +html_DATA = index.html $(wildcard *.html) +CLEANFILES = $(html_DATA) pod2htm*.tmp + +AUTODOCS_YCP ?= $(wildcard $(srcdir)/../../src/*.ycp) +AUTODOCS_PM ?= $(wildcard $(srcdir)/../../src/*.pm) + +index.html: $(AUTODOCS_YCP) $(AUTODOCS_PM) +#including *.pm, for the index + ${YCPDOC} -d. $^ + for i in $(AUTODOCS_PM); do \ + b=`basename $$i`; b=$${b%.pm}; \ + pod2html --title=$$b --infile=$$i --outfile=$$b.html; \ + echo "<a href='$$b.html'>$$b</a>" > $$b.mod.html; \ + done diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-sysconfig-2.17.0/configure.in new/yast2-sysconfig-2.17.0/configure.in --- old/yast2-sysconfig-2.17.0/configure.in 2008-06-16 14:26:25.000000000 +0200 +++ new/yast2-sysconfig-2.17.0/configure.in 2009-06-22 07:47:56.000000000 +0200 @@ -1,6 +1,6 @@ dnl configure.in for yast2-sysconfig dnl -dnl -- This file is generated by y2autoconf 2.16.7 - DO NOT EDIT! -- +dnl -- This file is generated by y2autoconf 2.18.5 - DO NOT EDIT! -- dnl (edit configure.in.in instead) AC_INIT(yast2-sysconfig, 2.17.0, http://bugs.opensuse.org/, yast2-sysconfig) diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-sysconfig-2.17.0/doc/autodocs/Makefile.am new/yast2-sysconfig-2.17.0/doc/autodocs/Makefile.am --- old/yast2-sysconfig-2.17.0/doc/autodocs/Makefile.am 2007-05-18 12:48:36.000000000 +0200 +++ new/yast2-sysconfig-2.17.0/doc/autodocs/Makefile.am 2009-06-16 09:42:07.000000000 +0200 @@ -1,12 +1,3 @@ -# -# Makefile.am for devtools/devtools/skeletons/config/doc/autodocs -# +# Makefile.am for YCP module .../doc/autodocs -htmldir = $(docdir)/autodocs - -index.html: $(srcdir)/../../src/*.ycp - $(ybindir)/ycpdoc -d. $(srcdir)/../../src/*.ycp - -html_DATA = index.html $(wildcard *.html) - -CLEANFILES = $(html_DATA) +include $(top_srcdir)/autodocs-ycp.ami diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-sysconfig-2.17.0/Makefile.am new/yast2-sysconfig-2.17.0/Makefile.am --- old/yast2-sysconfig-2.17.0/Makefile.am 2008-06-16 14:26:26.000000000 +0200 +++ new/yast2-sysconfig-2.17.0/Makefile.am 2009-06-22 07:47:56.000000000 +0200 @@ -32,10 +32,10 @@ # less strict; prefer bzip2 AUTOMAKE_OPTIONS = foreign dist-bzip2 no-dist-gzip -# where devtools instal m4 snippets +# where devtools install m4 snippets # argh, executed literally #ACLOCAL_AMFLAGS = -I $(Y2DEVTOOLS_PREFIX)/share/aclocal -ACLOCAL_AMFLAGS = -I `if test -d ./devtools/admin; then echo ./devtools/admin; else pkg-config --print-errors --variable=datadir yast2-devtools; fi`/aclocal +ACLOCAL_AMFLAGS = -I . -I `if test -d ./devtools/admin; then echo ./devtools/admin; else pkg-config --print-errors --variable=datadir yast2-devtools; fi`/aclocal Makefile.am.common: $(DEVTOOLS_DIR)/admin/Makefile.am.common cmp -s $< $@ || cp -f $< $@ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-sysconfig-2.17.0/src/config/Makefile.am new/yast2-sysconfig-2.17.0/src/config/Makefile.am --- old/yast2-sysconfig-2.17.0/src/config/Makefile.am 2007-05-18 12:48:36.000000000 +0200 +++ new/yast2-sysconfig-2.17.0/src/config/Makefile.am 2009-04-29 12:58:09.000000000 +0200 @@ -1,7 +1,7 @@ # # Makefile.am for sysconfig/src/config # -# $Id:$ +# $Id: Makefile.am 57028 2009-04-29 10:58:09Z lslezak $ # schemafilesdir = $(schemadir)/autoyast/rnc ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit mkinitrd for openSUSE:Factory
by root＠Hilbert.suse.de 29 Jun '09

29 Jun '09

Hello community, here is the log from the commit of package mkinitrd for openSUSE:Factory checked in at Mon Jun 29 17:43:11 CEST 2009. -------- --- mkinitrd/mkinitrd.changes 2009-05-25 12:16:01.000000000 +0200 +++ mkinitrd/mkinitrd.changes 2009-06-24 18:48:36.000000000 +0200 @@ -1,0 +2,16 @@ +Wed Jun 24 18:47:12 CEST 2009 - thomas(a)novell.com + +- only copy *.sh files to scripts directory + +------------------------------------------------------------------- +Wed Jun 24 16:23:12 CEST 2009 - thomas(a)novell.com + +- only include scripts with .sh extension in rpm file to fix + build failure + +------------------------------------------------------------------- +Tue Jun 23 07:38:22 CEST 2009 - thomas(a)novell.com + +- mounting /root/proc for SELinux (bnc#457984) + +------------------------------------------------------------------- calling whatdependson for head-i586 New: ---- mkinitrd-2.5.9_selinux.patch ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ mkinitrd.spec ++++++ --- /var/tmp/diff_new_pack.s27452/_old 2009-06-29 17:41:21.000000000 +0200 +++ /var/tmp/diff_new_pack.s27452/_new 2009-06-29 17:41:21.000000000 +0200 @@ -26,7 +26,7 @@ Requires: coreutils modutils util-linux grep gzip sed cpio udev sysvinit file perl-Bootloader AutoReqProv: on Version: 2.5.9 -Release: 6 +Release: 7 Conflicts: udev < 118 Requires: dhcpcd Summary: Creates an Initial RAM Disk Image for Preloading Modules @@ -35,6 +35,7 @@ Patch0: mkinitrd-2.5.9.patch Patch1: mkinitrd-setup-udev-firmware-fix Patch2: mkinitrd-silence.patch +Patch3: mkinitrd-2.5.9_selinux.patch %description Mkinitrd creates file system images for use as initial RAM disk @@ -68,6 +69,7 @@ %patch0 -p0 %patch1 -p1 %patch2 +%patch3 -p1 %build gcc $RPM_OPT_FLAGS -Wall -Os -o lib/mkinitrd/bin/run-init src/run-init.c @@ -91,7 +93,7 @@ mkdir -p $RPM_BUILD_ROOT/lib/mkinitrd/scripts mkdir -p $RPM_BUILD_ROOT/lib/mkinitrd/setup mkdir -p $RPM_BUILD_ROOT/lib/mkinitrd/boot -cp -a scripts $RPM_BUILD_ROOT/lib/mkinitrd +cp -a scripts/*.sh $RPM_BUILD_ROOT/lib/mkinitrd/scripts/ cp -a lib/mkinitrd/bin $RPM_BUILD_ROOT/lib/mkinitrd/bin make -C sbin DESTDIR=$RPM_BUILD_ROOT install chmod -R 755 $RPM_BUILD_ROOT/lib/mkinitrd @@ -105,6 +107,7 @@ # %install_mkinitrd /usr/bin/perl /sbin/mkinitrd_setup EOF + %posttrans /sbin/mkinitrd_setup @@ -119,7 +122,7 @@ %dir /lib/mkinitrd/boot %dir /lib/mkinitrd/setup %config /etc/rpm/macros.mkinitrd -/lib/mkinitrd/scripts/* +/lib/mkinitrd/scripts/*.sh /lib/mkinitrd/bin/* /sbin/mkinitrd /sbin/mkinitrd_setup ++++++ mkinitrd-2.5.9_selinux.patch ++++++ --- mkinitrd-2.5.9/scripts/boot-boot.sh.bak 2009-06-23 11:06:36.000000000 +0200 +++ mkinitrd-2.5.9/scripts/boot-boot.sh 2009-06-23 11:24:30.000000000 +0200 @@ -16,7 +16,7 @@ # Move device nodes /bin/mount --move /dev /root/dev -/bin/mount /root/proc +/bin/mount -t proc /root/proc /root/proc # ready to leave cd /root ++++++ mkinitrd.tar.bz2 ++++++ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/mkinitrd-2.5.9/scripts/setup-udev.sh new/mkinitrd-2.5.9/scripts/setup-udev.sh --- old/mkinitrd-2.5.9/scripts/setup-udev.sh 2009-02-09 09:58:03.000000000 +0100 +++ new/mkinitrd-2.5.9/scripts/setup-udev.sh 2009-06-23 11:02:37.000000000 +0200 @@ -36,4 +36,8 @@ fi done +for bin in /sbin/blkid; do + cp_bin $bin ${tmp_mnt}${bin} +done + save_var udev_timeout diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/mkinitrd-2.5.9/scripts/setup-udev.sh.orig new/mkinitrd-2.5.9/scripts/setup-udev.sh.orig --- old/mkinitrd-2.5.9/scripts/setup-udev.sh.orig 1970-01-01 01:00:00.000000000 +0100 +++ new/mkinitrd-2.5.9/scripts/setup-udev.sh.orig 2009-02-09 09:58:03.000000000 +0100 @@ -0,0 +1,39 @@ +#!/bin/bash +# +#%stage: setup +#%depends: start +# + +# Default udev timeout is 30 seconds +udev_timeout=30 + +mkdir -p $tmp_mnt/lib/udev/rules.d +mkdir -p $tmp_mnt/etc/udev/rules.d +# copy needed rules +for rule in \ + 05-udev-early.rules \ + 50-udev-default.rules \ + 59-dasd.rules \ + 60-persistent-storage.rules \ + 60-persistent-input.rules \ + 62-dm_linear.rules \ + 64-device-mapper.rules \ + 64-md-raid.rules \ + 80-drivers.rules; do + if [ -f /lib/udev/rules.d/$rule ]; then + cp /lib/udev/rules.d/$rule $tmp_mnt/lib/udev/rules.d + elif [ -f /etc/udev/rules.d/$rule ]; then + cp /etc/udev/rules.d/$rule $tmp_mnt/etc/udev/rules.d + fi +done +# copy helper +mkdir -p $tmp_mnt/lib/udev +for script in /lib/udev/* /sbin/*_id ; do + if [ ! -d "$script" ] && [ -x "$script" ] ; then + cp_bin $script ${tmp_mnt}${script} + elif [ -f "$script" ] ; then + cp -pL $script ${tmp_mnt}${script} + fi +done + +save_var udev_timeout ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit yast2-ntp-client for openSUSE:Factory
by root＠Hilbert.suse.de 29 Jun '09

29 Jun '09

Hello community, here is the log from the commit of package yast2-ntp-client for openSUSE:Factory checked in at Mon Jun 29 17:41:08 CEST 2009. -------- --- yast2-ntp-client/yast2-ntp-client.changes 2009-04-07 08:16:18.000000000 +0200 +++ yast2-ntp-client/yast2-ntp-client.changes 2009-06-17 16:21:23.000000000 +0200 @@ -1,0 +2,5 @@ +Tue Jun 16 14:27:45 CEST 2009 - mvidner(a)suse.cz + +- Using autodocs-ycp.ami, which contains a fix for automake 1.11. + +------------------------------------------------------------------- calling whatdependson for head-i586 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ yast2-ntp-client.spec ++++++ --- /var/tmp/diff_new_pack.x25279/_old 2009-06-29 17:40:45.000000000 +0200 +++ /var/tmp/diff_new_pack.x25279/_new 2009-06-29 17:40:45.000000000 +0200 @@ -20,8 +20,8 @@ Name: yast2-ntp-client Version: 2.18.0 -Release: 1 -License: GPL v2 or later +Release: 2 +License: GPL Group: System/YaST BuildRoot: %{_tmppath}/%{name}-%{version}-build Source0: yast2-ntp-client-2.18.0.tar.bz2 @@ -38,13 +38,6 @@ %description This package contains the YaST2 component for NTP client configuration. - - -Authors: --------- - Jiri Srain <jsrain(a)suse.cz> - Lukas Ocilka <locilka(a)suse.cz> - %prep %setup -n yast2-ntp-client-2.18.0 @@ -83,548 +76,3 @@ %doc %{prefix}/share/doc/packages/yast2-ntp-client /usr/share/YaST2/schema/autoyast/rnc/ntpclient.rnc %changelog -* Tue Mar 31 2009 mvidner(a)suse.cz -- Moved more code dealing with NTP setup from yast2-country - to yast2-ntp-client to make the API less fragile (bnc#483787). -- 2.18.0 -* Tue Mar 17 2009 mvidner(a)suse.cz -- Do not pop up with questions in CLI mode (bnc#456553). -* Fri Feb 20 2009 mvidner(a)suse.cz -- Fixed: the checkbox for opening/closing the firewall port would - have no effect (bnc#476951). Same problem, different reason. -- 2.17.14 -* Fri Jan 23 2009 mvidner(a)suse.cz -- Fixed: the checkbox for opening/closing the firewall port would - have no effect (bnc#468405). -- 2.17.13 -* Mon Jan 19 2009 mvidner(a)suse.cz -- Use the iburst option also for the server added during the - installation, to make the initial sync work even if the - time slew is too big (bnc#450418). -- 2.17.12 -* Fri Jan 09 2009 mvidner(a)suse.cz -- Removed a server reported nonfunctional (bnc#458917). -- Offer CC.pool.ntp.org for countries that do not have any other - server (bnc#458917 c4). -- 2.17.11 -* Fri Dec 12 2008 mvidner(a)suse.cz -- Due to yesterday's change, the Configure button at install time - would access settings that would be ignored. Removed it. - (bnc#449615 c15) -- Reduced spacing in new server dialog to make it fit 80x24 - (bnc#458459). -- 2.17.10 -* Thu Dec 11 2008 mvidner(a)suse.cz -- At install time, do not overwrite the original ntp.conf but add our - changes instead. Specifically netconfig needs the key config - preserved (bnc#449615). -- 2.17.9 -* Mon Dec 08 2008 kmachalkova(a)suse.cz -- Missing strings marked for translation (bnc#446967, bnc#446969) -* Thu Dec 04 2008 kmachalkova(a)suse.cz -- If NETCONFIG_NTP_POLICY value can't be read (e.g. in inst-sys), - set it to 'auto' as safe default (bnc#449362) -- 2.17.8 -* Thu Nov 13 2008 ug(a)suse.de -- rnc file fixed -* Fri Nov 07 2008 mvidner(a)suse.cz -- Set a 15s timeout on one-time synchronization (bnc#442287). -- 2.17.7 -* Thu Nov 06 2008 mvidner(a)suse.cz -- Adjusted dialog buttons according to YaST Style Guide - (bnc#440532). -- 2.17.6 -* Tue Oct 28 2008 varkoly(a)suse.de -- (bnc#438704) – ntp server do not work -- 2.17.5 -* Wed Oct 15 2008 mvidner(a)suse.cz -- Use sntp instead of ntpdate which is obsolete (bnc#431516). -- 2.17.4 -* Sun Oct 12 2008 mvidner(a)suse.cz -- Removed a check that was too expensive and made potential failures - silent (bnc#428026). -- 2.17.3 -* Mon Sep 29 2008 visnov(a)suse.cz -- avoid reading configuration during install (bnc #427712) -- 2.17.2 -* Mon Aug 18 2008 mvidner(a)suse.cz -- Applied Netconfig patch for fine-grained merging of static and - DHCP-supplied data (thanks to Michael Calmer) -- ntp-client_proposal: do not propose new configuration when some - already exists; Write: get server name from argument before - checking UI -- 2.17.1 -* Fri Jun 13 2008 mvidner(a)suse.cz -- yast2-slp is already present during the installation, so don't ask - to install it when the user chooses Local NTP Server / Lookup - (bnc#399659). -- Do not leave ntpd running if it was not running before pressing Test. -- 2.17.0 -* Fri May 16 2008 jsrain(a)suse.cz -- added categories Settings and System into desktop file - (bnc #382778) -* Tue May 13 2008 mvidner(a)suse.cz -- Fixed breakage caused by last change ("Command line specification - maps undefined option 'initial' for action 'add'", bnc#387717) -- 2.16.9 -* Wed Apr 30 2008 mvidner(a)suse.cz -- /etc/sysconfig/ntp:NTPD_INITIAL_NTPDATE was removed and assumes AUTO - now. Removed the UI related to it, but keet CLI and AutoYaST options - for compatibility (bnc#381838). -- Avoid "UI syntax error" when Write is called from the timezone - module (bnc#384715). -- 2.16.8 -* Wed Apr 16 2008 mvidner(a)suse.cz -- Merged proofread texts. -* Fri Apr 11 2008 mvidner(a)suse.cz -- Suggest ntp.$domain as the local server (fate#302863). -- 2.16.7 -* Wed Apr 09 2008 mvidner(a)suse.cz -- Read the whole configuration of NTP (not only ntp.conf - but also e.g. firewall) on running system to initialize - everything correctly; do not re-read ntp.confif it has been read - already (bnc#375877) -* Fri Apr 04 2008 jsuchome(a)suse.cz -- ntp-client_proposal: UI adapted for fate#302917 (distinguish - between one-time synchronization and saving the client config) -- 2.16.6 -* Thu Apr 03 2008 kmachalkova(a)suse.cz -- Display popup with icon if NTP test succeeds (bnc#306018) -- Require and install ntp packages (instead of obsoleted xntp), - correct documentation (bnc#372417) -- 2.16.5 -* Mon Mar 17 2008 jsrain(a)suse.cz -- added 'StartupNotify=true' to the desktop file (bnc #304964) -* Wed Feb 20 2008 kmachalkova(a)suse.cz -- Added yast2-country-data into BuildRequires -* Tue Feb 19 2008 kmachalkova(a)suse.cz -- Improved NTP service start wording (now & on boot vs. manually) - (bnc#345340) -- Improved NTP installation proposal layout (bnc#359209) -- Depend on lightweight yast2-country-data instead of yast2-country -- ntp-client_proposal made smarter (FaTE#302917) -- 2.16.4 -* Thu Jan 24 2008 mzugec(a)suse.cz -- replace deprecated NetworkDevices by NetworkInterfaces (from yast2) -- 2.16.3 -* Mon Jan 07 2008 kmachalkova(a)suse.cz -- Merged proofread texts -* Tue Nov 20 2007 kmachalkova(a)suse.cz -- Repository scanning (Package::Available()) definitely removed - (#327336) -- Updated help text referring to xntp documentation (#340867) -- 2.16.2 -* Wed Oct 31 2007 kmachalkova(a)suse.cz -- Prompt for installing xntp package (CheckAndInstallPackages) on - running system, do not scan repositories (Package::Available()) - (#327336) - - 2.16.1 -* Wed Oct 03 2007 kmachalkova(a)suse.cz -- Added visual progress feedback for running ntpdate in installation - proposal (#328469) -- Hide read/write progress in installation (#327066) -- Do not check for availability of xntp package (thus, update all - the repos) if it is already installed (#327336) -- 2.16.0 -* Fri Sep 21 2007 locilka(a)suse.cz -- When user selects to use NTP during installation, trigger also - yast2-ntp-client RPM for installation (#327050). -- 2.15.12 -* Thu Sep 20 2007 kmachalkova(a)suse.cz -- Do not write NTP configuration at the end of 1st stage of - installation if it hasn't been modified (#326338) -- Set write_only mode at the end of 1st stage, do not start NTP - service (#326478 related) -- 2.15.11 -* Thu Sep 13 2007 kmachalkova(a)suse.cz -- In installation proposal, remember whether synchronization with - NTP server has been selected (#308238) -- Set AbortFunction back to 'nil' after NtpClient::Read has been - called to prevent segfault after multiple calls (#294773) -- 2.15.10 -* Thu Sep 06 2007 kmachalkova(a)suse.cz -- Accept IP as a valid NTP server address (#308265) -- Use Packages::addAdditionalPackage() for marking xntp package for - installation so that it is not discarded later on (#307363) -- Correct fix for not re-reading NTP configuration when calling - ntp-client from outside (no exception for the 1st stage) -- 2.15.9 -* Mon Sep 03 2007 kmachalkova(a)suse.cz -- Fixed adding new NTP servers when calling ntp-client from outside - (e.g. timezone) - do not re-read the configuration if it has been - already read -- Use error popup (Report::Error) if NTP test fails (#306018) -- Display 'ntpd started on boot' warning message only if we don't - use NM and/or no network device is started at boot time (#299666) -- Do not query status/stop/start NTP service during installation - (holds for NTP test and ntp proposal client) -- Replace 'Finish' button with 'Accept' button in installation - proposal -- 2.15.8 -* Fri Aug 31 2007 kmachalkova(a)suse.cz -- Move all installation-related functionality into separate inst. - clients (_proposal and _finish) (FaTE #302192) -- Do not check for xntp package during installation (#299557, #299238) -- Call 'ntpdate' to synchronize with NTP server during installation - (do not restart the service) (#299238) -- 'During boot' NTP service start is now default (#302389) -- 2.15.7 -* Mon Aug 06 2007 kmachalkova(a)suse.cz -- Do not allow to edit access control rules if NTP is configured - via DHCP (DHCP may servers distribute their own rule set) -- Added help texts (FaTE #120109) -- 2.15.6 -* Fri Jul 27 2007 kmachalkova(a)suse.cz -- Added functionality to restrict NTP service to selected servers - only and to modify access control flags for individual servers - (FaTE #120109) -- 2.15.5 -* Thu Jul 26 2007 kmachalkova(a)suse.cz -- UI redesign: advanced configuration dialog splitted into 'General' - and 'Security' settings tab -- New GetNtpServersByCountry function - to be used by yast2-timezone - (FaTE #302192) -- 2.15.4 -* Fri Apr 13 2007 kmachalkova(a)suse.cz -- Use 'ntpdate -q' (query only) when testing if ntp server is accesible, - do not hard-set the time -- Updated list of public ntp servers -- 2.15.3 -* Mon Mar 12 2007 kmachalkova(a)suse.cz -- Removed dependency on yast2-slp - install yast2-slp package only - when needed (scan for local NTP servers) -- 2.15.2 -* Tue Feb 06 2007 kmachalkova(a)suse.cz -- Merged 'Great Britain' and 'UK' public ntp server lists (#241054) -- 2.15.1 -* Mon Jan 22 2007 kmachalkova(a)suse.cz -- Correct handling of switching between simple and advanced config - (display current server entries in server table) (#230240) -- Updated obsolete help text -- 2.15.0 -* Fri Nov 10 2006 kmachalkova(a)suse.cz -- Don't forget to store type of ntp record (simple config -> server) - (#216456) -- 2.14.2 -* Mon Nov 06 2006 kmachalkova(a)suse.cz -- Set ActiveDirectory DC as a default time server when called from - samba-client -- 2.14.1 -* Mon Oct 30 2006 kmachalkova(a)suse.cz -- Improved Autoyast profile validation (ntpclient.rnc moved from - autoyast package (#215248) -- Always set NTP_INITIAL_NTPDATE to AUTO if ntp.conf is modified - via DHCP -- 2.14.0 -* Wed Aug 02 2006 locilka(a)suse.cz -- Complex configuration renamed to Advanced configuration (#179476) -* Tue Jul 18 2006 locilka(a)suse.cz -- NTP Client renamed to NTP Configuration because one can also - configure an NTP Server here (#173411). -- 2.13.12 -* Mon May 22 2006 locilka(a)suse.cz -- When switchich to the complex configuration or saving the simple - configuration, current server was allways re-added with - initial_sync==true even if there was no reason to change - the current value of initial_sync (#177575). -- Remember all servers correctly when random pool servers are - selected (#177570). -- 2.13.11 -* Thu May 18 2006 locilka(a)suse.cz -- Do not report the empty server address when switching to the - Complex configuration (#176581). -- Fixed behavior when switching to the complex configuration with - no server address defined before. Sometimes it deleted the local - clock entry. -- 2.13.10 -* Thu May 11 2006 locilka(a)suse.cz -- Adjusting ntp_conf rw agent to be able to understand additional - comments on the same line where are already some entries written - (#172589). -- 2.13.9 -* Wed Apr 26 2006 locilka(a)suse.cz -- Check and store the changed address record when switching from - the simple to the complex configuration (#169206). -- 2.13.8 -* Thu Apr 13 2006 locilka(a)suse.cz -- Leaving the 'initial_sync' and 'options' for pool.ntp.org feature - without change when user has previously changed them (#165852). -- 2.13.7 -* Tue Apr 11 2006 locilka(a)suse.cz -- Switching from simple to complex configuration was eating server - entries (#165149). -- 2.13.6 -* Thu Mar 23 2006 locilka(a)suse.cz -- Added checking for root permissions into the module startup - process (#158483) -- 2.13.5 -* Mon Mar 13 2006 locilka(a)suse.cz -- fixed bug #155325, problems with widgets around random pool - servers feature -- 2.13.4 -* Fri Mar 10 2006 locilka(a)suse.cz -- merged texts from proofread -- 2.14.3 -* Mon Mar 06 2006 locilk(a)suse.cz -- Adjusted BuildRequires for package -- 2.14.2 -* Fri Jan 27 2006 locilka(a)suse.cz -- merged texts from proofread -* Mon Dec 19 2005 jsuchome(a)suse.cz -- merged texts from proofread -- 2.13.1 -* Thu Nov 03 2005 locilka(a)suse.cz -- Added enhancement #114268 - Selection of public servers newly contains - $country_shortname.pool.ntp.org for every state known for YaST. -- Added enhancement #105300 - New checkbox for adding 3 'random' servers from pool.ntp.org - which adds [0|1|2].pool.ntp.org servers. These servers names - change their IP (and physical destination) every hour. -- Generated and tested new set of public NTP servers. -- Fixed scropt for generating set of public servers not to contain - HTML tags in server name and location. -- 2.13.0 -* Tue Aug 16 2005 locilka(a)suse.cz -- Fixed bug #104907 - Server selected from one of found with the Lookup function had - been returned as the string "server". -- Fixed bug #104906 - Now it is possible to save the configuration when - start ntp: "never" is selected and no server has been choosen. -- 2.12.6 -* Tue Aug 16 2005 locilka(a)suse.cz -- Merged proofread texts -* Fri Aug 12 2005 locilka(a)suse.cz -- ComboBox for selecting a public NTP server has at least 40 - characters. Helpful for ncurses. Bug #97184 -- 2.12.5 -* Tue Aug 09 2005 locilka(a)suse.cz -- Fixing bug #102993 - NTP server textentry is not checked when switching to the complex - configuration -- 2.12.4 -* Wed Aug 03 2005 locilka(a)suse.cz -- Changed the last "xntpd" to "ntp" -- Changed SCR agent for xntpd to ntp -- Changed sysconfig variables XNTPD to NTPD -- Fixed testsuites -- Changed sysconfig/network/dhcp.DHCLIENT_MODIFY_NTPD_CONF to the - DHCLIENT_MODIFY_NTP_CONF -- Fixed a typo in help -- Fixed testsuites (xntp -> ntp) -- 2.12.3 -* Thu Jul 28 2005 locilka(a)suse.cz -- Changed service name "xntpd" to "ntp" -- Updated .desktop file -- 2.12.2 -* Tue Jul 19 2005 locilka(a)suse.cz -- Fixing some help texts to match exactly the dialog widget names -- Fixing complains in y2log about converting 'true' to integer - during Radio Clock symlink configuration -* Thu May 19 2005 locilka(a)suse.cz -- Fixing "Save and Restart" function not to produce Progress errors -- Changing labels, headlines, names. Major changes: - Broadcast -> Outgoing Broadcast - Accepting Broadcasts -> Incoming Broadcast -- Replacing "Select NTP Server" dialog with two popups: - "Select Local NTP Server" and "Select Public NTP Server" -- Changing texts to be YaST2 Style Guide Compatible -- 2.12.1 -* Tue May 17 2005 locilka(a)suse.cz -- Fixing bug #83918 - NTP Client could freeze during saving the configuration when the - starting directory of YaST2 ntp-client was a network directory - and the "Configure via DHCP" option has been unselected. -* Wed May 11 2005 locilka(a)suse.cz -- NTP Server entry-checking is ommited when changing the dialog to - select one from already found or public ones -- Caching Lookup-Servers results -* Mon May 09 2005 locilka(a)suse.cz -- Added "Scanning nework" popup which appears during scanning the - local network for NTP servers -- Added error popups when no servers are found (popup text depends - on whether SuSEfirewall2 is running) -- Added some missing comments for translators -- 2.12.0 -* Thu Mar 31 2005 locilka(a)suse.cz -- Fixed bug #74376 - Checking server/peer address entry for existency and rightness -* Wed Mar 16 2005 locilka(a)suse.cz -- Fixed bug #73039 - Firewall configuration had never been saved -- Changing maintainer -> locilka -- 2.11.3 -* Mon Feb 14 2005 jsrain(a)suse.cz -- do not ask to confirm abort if nothing changed (#50743) -- 2.11.2 -* Wed Dec 15 2004 jsrain(a)suse.cz -- clean-up of neededforbuild and requires -- using generic firewall enabling widget/popup -- using Progress::set -- 2.11.1 -* Tue Nov 02 2004 jsrain(a)suse.cz -- adapted to new Mode.ycp interface -- 2.11.0 -* Tue Oct 19 2004 jsrain(a)suse.cz -- using unified messages from Message.ycp/Confirm.ycp/Label.ycp -* Fri Sep 17 2004 jsrain(a)suse.cz -- added NTP servers located at "Physikalisch-Technische - Bundesanstalt" to the list of NTP servers (#45409) -- 2.10.8 -* Tue Sep 14 2004 jsrain(a)suse.cz -- adapted testsuite to changes in yast2-firewall -- 2.10.7 -* Mon Sep 06 2004 jsrain(a)suse.cz -- fixed using NTP server detected via SLP -- 2.10.6 -* Fri Sep 03 2004 jsrain(a)suse.cz -- added GerModified and SetModified functions to _auto client -* Mon Aug 30 2004 jsrain(a)suse.cz -- removed duplicated ntp_servers.ycp file -- 2.10.5 -* Mon Aug 23 2004 locilka(a)suse.cz -- added missing data: ntp_servers -- 2.10.4 -* Thu Aug 19 2004 visnov(a)suse.cz -- fixed command line return type -- 2.10.3 -* Mon Aug 16 2004 jsrain(a)suse.cz -- fixed firewall port identification -- 2.10.2 -* Tue Aug 10 2004 jsrain(a)suse.cz -- merged texts from proofread -* Mon Aug 09 2004 jsrain(a)suse.cz -- adapted to the new firewall interface -- updated to changes in CWM -- split the UI and backend (the border wasn't clear) -- 2.10.1 -* Tue Aug 03 2004 jsrain(a)suse.cz -- updated helps -- updated comments to functions and texts fro translations -- other updates -* Fri Jul 30 2004 jsrain(a)suse.cz -- UI updates -* Thu Jul 29 2004 jsrain(a)suse.cz -- added a list of NTP servers and offering to select one of them -- added support for configuring via DHCP -- 2.10.0 -* Mon Jul 19 2004 jsrain(a)suse.cz -- use common function for checking installed packages (#30872) -* Mon Jun 21 2004 jsrain(a)suse.cz -- fixed saving of options to /etc/ntp.conf (#42199) -* Sun May 30 2004 nashif(a)suse.de -- Honor old syntax when importing (#41379) -- 2.9.13 -* Fri May 21 2004 jsrain(a)suse.cz -- dont complain about missing packages when cloning (nashif) -- 2.9.12 -* Tue May 04 2004 jsrain(a)suse.cz -- merged texts from proofread -- 2.9.11 -* Thu Apr 08 2004 jsrain(a)suse.cz -- fixed texts of menu button in the log display dialog (#38522) -* Fri Apr 02 2004 jsrain(a)suse.de -- changed version to GPL -- 2.9.10 -* Tue Mar 30 2004 jsrain(a)suse.de -- fixed typo in variable name -- 2.9.9 -* Fri Mar 26 2004 jsrain(a)suse.de -- added missing textdomain, added missing comments for translators -* Mon Mar 15 2004 jsrain(a)suse.cz -- fixed parsing of configuration files with comments on the same - line as option (eg. server ntp.example.com #comment) (#35818) -- fixed saving address of the NTP server from the simple dialog -- added support for lookup NTP servers via SLP -- reduced VSpacings in order to fit in new wizard -- not asking for confirmation when set NTP service on if at least - one network interface started on boot found (#35487) -- fixed handling of `abort event -- 2.9.8 -* Wed Mar 10 2004 sh(a)suse.de -- V 2.9.7 -- Migration to new wizard -* Tue Mar 09 2004 jsrain(a)suse.de -- Require -> Package -- using Sequencer module -* Mon Mar 08 2004 jsrain(a)suse.de -- setting icon -- 2.9.6 -* Fri Mar 05 2004 jsrain(a)suse.de -- types fixes -- 2.9.5 -* Wed Mar 03 2004 jsrain(a)suse.de -- fixed testsuite -- 2.9.4 -* Mon Mar 01 2004 jsrain(a)suse.de -- fixed displaying NTP summary -- merged texts from proofread -- more strict data types -- 2.9.3 -* Mon Feb 16 2004 jsrain(a)suse.de -- syntax fix of abort checking (in order to build) -- 2.9.2 -* Tue Feb 10 2004 jsrain(a)suse.de -- dropped .y2cc file -- 2.9.1 -* Thu Jan 22 2004 jsrain(a)suse.de -- added displaying of NTP daemon's log -- added firewall settin support -- 2.9.0 -* Wed Jan 21 2004 jsrain(a)suse.de -- updated for the new interpreter -- added support for command line interface -* Thu Sep 25 2003 jsrain(a)suse.de -- typos fixed (#30274) -* Thu Sep 11 2003 nashif(a)suse.de -- #30291: return list of required packages for autoinstallation -* Wed Sep 10 2003 jsrain(a)suse.de -- stopping XNTP daemon when set to never start it automatically - (30358) -- 2.8.9 -* Fri Sep 05 2003 jsrain(a)suse.de -- merged texts from proofread -- 2.8.8 -* Tue Sep 02 2003 jsrain(a)suse.de -- marked missed texts for translation -- fixed translation of exit without saving popup (was evaluated in - incorect textdomain) -* Mon Sep 01 2003 jsrain(a)suse.de -- separated "Type of entry to add" popup to extra dialog and added - some help to the entries (#29669) -- 2.8.7 -* Fri Aug 29 2003 jsrain(a)suse.de -- improved helps (#29379) -- displaying correctly local CMOS clock (#29422) -- 2.8.6 -* Mon Aug 25 2003 jsrain(a)suse.de -- not touching sysconfig/xntp:XNTPD_INITIAL_NTPDATE if containg - AUTO and would be replaced with empty string (#29315) -- 2.8.5 -* Wed Aug 20 2003 jsuchome(a)suse.de -- removed redundant "initialization dialog" (#28779) -- 2.8.4 -* Mon Aug 11 2003 jsrain(a)suse.de -- merged text from proofread -- 2.8.3 -* Wed Aug 06 2003 jsrain(a)suse.de -- fixed Abort button handling -* Wed Aug 06 2003 jsrain(a)suse.de -- changed internal structure (autoyast requirement) -- reporting error if xntp package installation fails -- handling double-click in the summary table -- 2.8.2 -* Tue Aug 05 2003 jsrain(a)suse.de -- added warning if NTP daemon set to be started at boot -- added more testsuites -- added some documentation -* Mon Aug 04 2003 jsrain(a)suse.de -- added .desktop file -- 2.8.1 -* Wed Jul 30 2003 jsrain(a)suse.de -- not (re)starting service during autoinstallation -* Tue Jul 29 2003 jsrain(a)suse.de -- adapted to udpated CWM interface -* Mon Jul 07 2003 jsrain(a)suse.de -- initial version ++++++ yast2-ntp-client-2.18.0.tar.bz2 ++++++ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-ntp-client-2.18.0/autodocs-ycp.ami new/yast2-ntp-client-2.18.0/autodocs-ycp.ami --- old/yast2-ntp-client-2.18.0/autodocs-ycp.ami 1970-01-01 01:00:00.000000000 +0100 +++ new/yast2-ntp-client-2.18.0/autodocs-ycp.ami 2009-06-22 08:14:09.000000000 +0200 @@ -0,0 +1,27 @@ +# -*- makefile -*- Automake include file +# $Id: autodocs-ycp.ami 33394 2006-10-13 11:51:40Z mvidner $ + +# Builds source documentation for YCP sources +# Uses ycpdoc +# PARAMETERS: +# AUTODOCS_YCP: Files that the ycp autodocs is built from +# Optional - the default is $(srcdir)/../../src/*.ycp +# AUTODOCS_PM: Files that the perl autodocs is built from +# Optional - the default is $(srcdir)/../../src/*.pm + +htmldir = $(docdir)/autodocs + +html_DATA = index.html $(wildcard *.html) +CLEANFILES = $(html_DATA) pod2htm*.tmp + +AUTODOCS_YCP ?= $(wildcard $(srcdir)/../../src/*.ycp) +AUTODOCS_PM ?= $(wildcard $(srcdir)/../../src/*.pm) + +index.html: $(AUTODOCS_YCP) $(AUTODOCS_PM) +#including *.pm, for the index + ${YCPDOC} -d. $^ + for i in $(AUTODOCS_PM); do \ + b=`basename $$i`; b=$${b%.pm}; \ + pod2html --title=$$b --infile=$$i --outfile=$$b.html; \ + echo "<a href='$$b.html'>$$b</a>" > $$b.mod.html; \ + done diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-ntp-client-2.18.0/configure.in new/yast2-ntp-client-2.18.0/configure.in --- old/yast2-ntp-client-2.18.0/configure.in 2009-04-07 08:16:08.000000000 +0200 +++ new/yast2-ntp-client-2.18.0/configure.in 2009-06-22 08:14:09.000000000 +0200 @@ -1,6 +1,6 @@ dnl configure.in for yast2-ntp-client dnl -dnl -- This file is generated by y2autoconf 2.17.6 - DO NOT EDIT! -- +dnl -- This file is generated by y2autoconf 2.18.5 - DO NOT EDIT! -- dnl (edit configure.in.in instead) AC_INIT(yast2-ntp-client, 2.18.0, http://bugs.opensuse.org/, yast2-ntp-client) diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-ntp-client-2.18.0/doc/autodocs/Makefile.am new/yast2-ntp-client-2.18.0/doc/autodocs/Makefile.am --- old/yast2-ntp-client-2.18.0/doc/autodocs/Makefile.am 2003-07-01 15:14:58.000000000 +0200 +++ new/yast2-ntp-client-2.18.0/doc/autodocs/Makefile.am 2009-06-16 09:42:07.000000000 +0200 @@ -1,12 +1,3 @@ -# -# Makefile.am for devtools/devtools/skeletons/config/doc/autodocs -# +# Makefile.am for YCP module .../doc/autodocs -htmldir = $(docdir)/autodocs - -index.html: $(srcdir)/../../src/*.ycp - $(ybindir)/ycpdoc -d. $(srcdir)/../../src/*.ycp - -html_DATA = index.html $(wildcard *.html) - -CLEANFILES = $(html_DATA) +include $(top_srcdir)/autodocs-ycp.ami diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-ntp-client-2.18.0/doc/autodocs/Makefile.in new/yast2-ntp-client-2.18.0/doc/autodocs/Makefile.in --- old/yast2-ntp-client-2.18.0/doc/autodocs/Makefile.in 2009-04-07 08:16:11.000000000 +0200 +++ new/yast2-ntp-client-2.18.0/doc/autodocs/Makefile.in 2009-06-22 08:14:13.000000000 +0200 @@ -14,9 +14,18 @@ @SET_MAKE@ -# -# Makefile.am for devtools/devtools/skeletons/config/doc/autodocs -# +# Makefile.am for YCP module .../doc/autodocs + +# -*- makefile -*- Automake include file +# $Id: autodocs-ycp.ami 33394 2006-10-13 11:51:40Z mvidner $ + +# Builds source documentation for YCP sources +# Uses ycpdoc +# PARAMETERS: +# AUTODOCS_YCP: Files that the ycp autodocs is built from +# Optional - the default is $(srcdir)/../../src/*.ycp +# AUTODOCS_PM: Files that the perl autodocs is built from +# Optional - the default is $(srcdir)/../../src/*.pm VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ @@ -37,8 +46,9 @@ build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/autodocs-ycp.ami subdir = doc/autodocs -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ @@ -174,11 +184,11 @@ yncludedir = @yncludedir@ ystartupdir = @ystartupdir@ html_DATA = index.html $(wildcard *.html) -CLEANFILES = $(html_DATA) +CLEANFILES = $(html_DATA) pod2htm*.tmp all: all-am .SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/autodocs-ycp.ami $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ @@ -357,8 +367,17 @@ uninstall-am uninstall-htmlDATA -index.html: $(srcdir)/../../src/*.ycp - $(ybindir)/ycpdoc -d. $(srcdir)/../../src/*.ycp +AUTODOCS_YCP ?= $(wildcard $(srcdir)/../../src/*.ycp) +AUTODOCS_PM ?= $(wildcard $(srcdir)/../../src/*.pm) + +index.html: $(AUTODOCS_YCP) $(AUTODOCS_PM) +#including *.pm, for the index + ${YCPDOC} -d. $^ + for i in $(AUTODOCS_PM); do \ + b=`basename $$i`; b=$${b%.pm}; \ + pod2html --title=$$b --infile=$$i --outfile=$$b.html; \ + echo "<a href='$$b.html'>$$b</a>" > $$b.mod.html; \ + done # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-ntp-client-2.18.0/Makefile.am new/yast2-ntp-client-2.18.0/Makefile.am --- old/yast2-ntp-client-2.18.0/Makefile.am 2009-04-07 08:16:08.000000000 +0200 +++ new/yast2-ntp-client-2.18.0/Makefile.am 2009-06-22 08:14:09.000000000 +0200 @@ -32,10 +32,10 @@ # less strict; prefer bzip2 AUTOMAKE_OPTIONS = foreign dist-bzip2 no-dist-gzip -# where devtools instal m4 snippets +# where devtools install m4 snippets # argh, executed literally #ACLOCAL_AMFLAGS = -I $(Y2DEVTOOLS_PREFIX)/share/aclocal -ACLOCAL_AMFLAGS = -I `if test -d ./devtools/admin; then echo ./devtools/admin; else pkg-config --print-errors --variable=datadir yast2-devtools; fi`/aclocal +ACLOCAL_AMFLAGS = -I . -I `if test -d ./devtools/admin; then echo ./devtools/admin; else pkg-config --print-errors --variable=datadir yast2-devtools; fi`/aclocal Makefile.am.common: $(DEVTOOLS_DIR)/admin/Makefile.am.common cmp -s $< $@ || cp -f $< $@ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-ntp-client-2.18.0/Makefile.in new/yast2-ntp-client-2.18.0/Makefile.in --- old/yast2-ntp-client-2.18.0/Makefile.in 2009-04-07 08:16:11.000000000 +0200 +++ new/yast2-ntp-client-2.18.0/Makefile.in 2009-06-22 08:14:13.000000000 +0200 @@ -226,10 +226,10 @@ # less strict; prefer bzip2 AUTOMAKE_OPTIONS = foreign dist-bzip2 no-dist-gzip -# where devtools instal m4 snippets +# where devtools install m4 snippets # argh, executed literally #ACLOCAL_AMFLAGS = -I $(Y2DEVTOOLS_PREFIX)/share/aclocal -ACLOCAL_AMFLAGS = -I `if test -d ./devtools/admin; then echo ./devtools/admin; else pkg-config --print-errors --variable=datadir yast2-devtools; fi`/aclocal +ACLOCAL_AMFLAGS = -I . -I `if test -d ./devtools/admin; then echo ./devtools/admin; else pkg-config --print-errors --variable=datadir yast2-devtools; fi`/aclocal CLEANFILES = MAINTAINERCLEANFILES = package/$(RPMNAME)-$(VERSION).tar.bz2 package/$(RPMNAME).spec POT_DST = $(shell find -type d -name testsuite -prune , \ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit yast2-vm for openSUSE:Factory
by root＠Hilbert.suse.de 29 Jun '09

29 Jun '09

Hello community, here is the log from the commit of package yast2-vm for openSUSE:Factory checked in at Mon Jun 29 17:40:35 CEST 2009. -------- --- yast2-vm/yast2-vm.changes 2009-04-01 21:47:18.000000000 +0200 +++ yast2-vm/yast2-vm.changes 2009-06-17 16:45:28.000000000 +0200 @@ -1,0 +2,5 @@ +Tue Jun 16 14:29:32 CEST 2009 - mvidner(a)suse.cz + +- Using autodocs-ycp.ami, which contains a fix for automake 1.11. + +------------------------------------------------------------------- calling whatdependson for head-i586 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ yast2-vm.spec ++++++ --- /var/tmp/diff_new_pack.o18313/_old 2009-06-29 17:39:06.000000000 +0200 +++ /var/tmp/diff_new_pack.o18313/_new 2009-06-29 17:39:06.000000000 +0200 @@ -20,8 +20,8 @@ Name: yast2-vm Version: 2.16.10 -Release: 1 -License: GPL v2 or later +Release: 2 +License: GPL Group: System/YaST BuildRoot: %{_tmppath}/%{name}-%{version}-build Source0: yast2-vm-2.16.10.tar.bz2 @@ -34,13 +34,6 @@ %description This YaST module configures and installs a virtual machine. - - -Authors: --------- - Ladislav Slezak <lslezak(a)suse.cz> - Michael G. Fritch <mgfritch(a)novell.com> - %prep %setup -n yast2-vm-2.16.10 @@ -74,483 +67,3 @@ %{prefix}/share/applications/YaST2/xen.desktop %doc %{prefix}/share/doc/packages/yast2-vm %changelog -* Wed Apr 01 2009 carnold(a)novell.com -- bnc#488598 - chkconfig and insserv fail on init scripts that - depend on /etc/init.d/boot.clock in Xen domU -* Thu Feb 12 2009 coolo(a)suse.de -- add dummy Exec line to the group desktop file to make it validate -* Fri Jan 09 2009 olh(a)suse.de -- use ExclusiveArch as in /SRC/arch/ -* Wed Nov 12 2008 carnold(a)novell.com -- bnc#431907 - inst_finish.ycp:233 Client vm_finish returned - invalid data -* Wed Oct 22 2008 carnold(a)novell.com -- bnc#436987 - yast2-vm: Cannot create VMs if XEN installation - happens via the yast2-vm module -* Thu Oct 09 2008 carnold(a)novell.com -- Install virt-viewer as one of the GUI packages needed by xen. -* Fri May 16 2008 jsrain(a)suse.cz -- added categories Settings and System into desktop file - (bnc #382778) -* Tue May 13 2008 carnold(a)novell.com -- yast2-vm needs to install vm-install. -* Wed Apr 09 2008 carnold(a)novell.com -- Disable code that modifies SuSEfirewall2. -* Wed Mar 26 2008 carnold(a)novell.com -- In 11.0, kernel-xenpae is just kernel-xen. There is no nonpae - 32bit kernel. -* Mon Mar 17 2008 jsrain(a)suse.cz -- added 'StartupNotify=true' to the desktop file (bnc #304964) -* Fri Feb 29 2008 carnold(a)novell.com -- Remove tools-ioemu dependency. This package no longer exists. -* Mon Dec 10 2007 lslezak(a)suse.cz -- merged proofread texts (2007-18-23) -* Fri Aug 31 2007 stbinner(a)suse.de -- don't repeat Name content in GenericName field within xen.desktop -* Tue Jun 05 2007 carnold(a)novell.com -- Respond when "help" is requested at the command line. (#269913) -- Prompt for installing graphical tools when running in text mode. - (#268510) -* Mon May 21 2007 carnold(a)novell.com -- The 'Virtualization' category is missing and the virtualization - icons are in the other category. (#258600) -- Update icon name in yast2-vm (#258519) -* Mon Mar 12 2007 carnold(a)novell.com -- Change the check for xenbr0 to xenbr+. (#233934) -- Remove requires rule on yast2-installation. (#252932) -* Fri Feb 23 2007 carnold(a)novell.com -- A fix to allow the xm console command to work again with - PV guests. (#244097) -* Wed Feb 21 2007 carnold(a)novell.com -- Yast2-vm now only installs the hypervisor and tools on the host - server. All other tasks have been moved to vm-install and - virt-manager. -* Wed Dec 06 2006 carnold(a)novell.com -- Yast2-vm does not remove the directory that contains the vm disk - image when deleting a vm. (#221258) -- Yast2-vm doesn't recognize an installation source set up as an - ISO file over NFS. (#224798) -* Thu Nov 16 2006 carnold(a)novell.com -- yast2-vm acquires package from the wrong install source when a - second source is specified for additional vm installs. (#217403) -* Fri Nov 03 2006 carnold(a)novell.com -- yast2-vm inserts empty cdrom line when booting from an already - installed disk causing the guest to fail because it can't attach - to the non-existent CDROM. (#210099) -- yast2-vm does not remove link in /etc/xen/auto when deleting a - VM causing error messages from xendomains when it tries to auto - start it. (#207082) -- Eliminate a "no GUI" warning message that is displayed in the pv - guest during install because textmode=1 was removed for the - framebuffer feature that did not make it in. (#215990) -* Fri Sep 01 2006 mgfritch(a)novell.com -- Replace the 'cdrom=' entry in fully virtualized config files with - a corresponding disk line entry. -- If para virtualized, kernel is extracted from a SUSE installation - source, and domU kernel version >= 2.6.18, add "sdl=1" to config - file. -- Remove the 'extra' option with 'vnc=0 textmode=1'. -- 2.14.0 -* Mon Aug 07 2006 mgfritch(a)novell.com -- Always write out "/usr/lib/xen/bin/qemu-dm" for the device_model - field in a fully virtualized VM configuration file. (#193854) -- Add Logical Volumes (LVM) to the list of available block devices. - (#186930, #189765) -- Check whether X window system is accessible by testing for the - existance of the DISPLAY enviroment value. (#194389) -- When fully virtualized, if a bridge has not been specifed for a - given vif, do not default to the value 'bridge=xenbr0' in the - VM config file (#197777) -- Use the 'xm info' values 'max_para_memory' or 'max_hvm_memory' - instead of 'max_free_memory' when calculating the amount of - memory available for a given VM. (#184727) -- Display a popup feedback message when creating a non-sparse disk. - (#167145) -- Display a popup yes/no dialog asking if xend should be started - when it is not running. (#176369) -- 2.13.62 -* Thu Jul 13 2006 mgfritch(a)novell.com -- Do not create the disk images (i.e. dd) when proposal_type is - 'boot' (#192135) -- 2.13.61 -* Wed Jul 12 2006 mgfritch(a)novell.com -- Removed fix for async mode disk read/write during paravirtualized - installs (#190869) -- 2.13.60 -* Mon Jul 10 2006 mgfritch(a)novell.com -- If paravirtualization, allow async mode disk read/write only - during the VM install. (#190869) -- 2.13.59 -* Tue Jun 27 2006 lslezak(a)suse.cz -- Initialize new installation sources, use the new source ID when - the installation source is modified (#179410) -- 2.13.58 -* Fri Jun 16 2006 mgfritch(a)novell.com -- Replace the 'extra' option 'vnc=1' with 'vnc=0 textmode=1' - (#185944) -- 2.13.57 -* Tue Jun 13 2006 mgfritch(a)novell.com -- Use 'sed -i' instead of 'sed -e' to avoid changing the file - permissions of /etc/sysconfig/console and /etc/inittab. (#184690) -- 2.13.56 -* Tue Jun 06 2006 mgfritch(a)novell.com -- Preserve the AutoYaST settings for both the install proposal and - the final proposal. Generate an autoinstallation summary proposal - that contains the settings for both the install and final - proposals. (#182149) -- 2.13.55 -* Thu Jun 01 2006 mgfritch(a)novell.com -- Do not display the 'Manage Virtual Machines' dialog when - creating an AutoYaST profile using the Autoinstallation wizard. - (#181072) -- Only enable `view button on the 'Manage Virtual Machines' dialog - if YaST is running in a graphical display (XServer) and the - selected vm is not configured to use SDL. (#181011) -- Only enable `start button on the 'Manage Virtual Machines' dialog - if YaST is running in a graphical display (XServer) or the - selected vm is configured as a paravirtualized guest. (#181009) -- Disable service 'earlykbd' when running an install inside of a - domU. (#180919) -- If paravirtualized domU install, use the 'extra' option 'vnc=1', - rather than 'textmode=1' (#181074) -- 2.13.54 -* Mon May 29 2006 mgfritch(a)novell.com -- VM_XEN::ValidateConfigName() should return false if a vm name - setting inside of a config file conflicts with the proposed - vm name (#181001) -- Search physical disk partitions specified in the VM disk settings - for a valid Xen kernel. (#180130) -- Remove any single or double quotes surrounding values read from a - VM config file. (#179324) -- If dom0 is 64 bit OS, domU is full virtualization, and domU - memory is >= 3.5 GB, set 'pae=1' in the VM config file. (#180361) -- 2.13.53 -* Mon May 22 2006 mgfritch(a)novell.com -- Allow the cdrom_image setting to persist when moving from - proposal_type 'install' to proposal_type 'boot'. (#174616) -- 2.13.52 -* Fri May 19 2006 lslezak(a)suse.cz -- allow the VM management in ncurses UI (#149045) -- 2.13.51 -* Thu May 18 2006 mgfritch(a)novell.com -- Do not install kernel-xen when installing kernel-xenpae. - (#175117) -- 2.13.50 -* Wed May 17 2006 lslezak(a)suse.cz -- check whether the package management is available at start - of the yast module (#175148) -- 2.13.49 -* Tue May 16 2006 mgfritch(a)novell.com -- Re-generate the proposed MAC address for the default network - settings when VM_XEN::resetNetworkConfig() is called. (#175955) -- Don't display mounted disk partitions in dom0 as physical disk - partitions available for use in domU. (#173433) -- Select the correct disk partition containing the xenpae kernel - or the NetWare viX kernel. (#175426, #175729) -- 2.13.48 -* Thu May 11 2006 mgfritch(a)novell.com -- Always write out the 'cdrom=' entry to the vm config file if - full virtualization and proposal_mode != 'existing'. - (#174616) -- Ask for the initrd package first and the kernel package last - when extracting a kernel/initrd from a SUSE installation source. - This should ensure CD1 is in the CD-ROM drive when the VM - installation starts. (#175111) -- Install kernel-xenpae by default for dom0 when running on - kernel-bigsmp. (#175117) -- 2.13.47 -* Tue May 09 2006 mgfritch(a)novell.com -- Default the root device if a disk partition contains the - Xen Linux kernel and ramdisk. (#162593) -- When a NetWare kernel is detected, set the 'DISPLAY=' value to - the IP address of the network interface assigned to the default - route in the IP routing table. (#173594) -- Do not display the message 'Installation will be aborted' when - we are not installing a virtual machine. (#173991) -- Remove any inst sources that were added to the disk configuration - when switching virtualization mode. (#171696) -- 2.13.46 -* Mon May 08 2006 mgfritch(a)novell.com -- Enable the Write portion of vm_finish.ycp if Arch::is_xenU() - and when `installation, `update, or `autoinst. - (#167204, #171476, #161721) -- 2.13.45 -* Thu May 04 2006 mgfritch(a)novell.com -- resetSourceConfig() must always be called after resetDiskConfig() - to ensure the disk config settings are not overrun by the source - config settings. (#172714) -- Final settings proposal should default to the PAE kernel - (vmlinuz-xenpae) when the PAE kernel was used to install the - VM. (#172977) -- Remove workaround for AMD Pacifica (svm) processor on arch x86_64 - with full virtualization. (#169855) -- Display an error message if a new disk image (loopback-create) - already exists. (#173267) -- Updated text strings and comments to comply with the Style Guide - for SUSE Program Texts located on forge. -- 2.13.44 -* Tue May 02 2006 mgfritch(a)novell.com -- Added patch for "srcid" not set in results from - Pkg::PkgPropertiesAll (#163609) -- Added a popup error message to VM_Common::CreateDiskImage() for - when the 'dd' command fails to create a disk image (#172083) -- Added an additional popup error message when installing/finalizing - a VM's settings. This new popup contains a details button with the - output (stdout/stderr) of a failed xm create command (#172084) -- Final text review in preparation for text freeze. -- 2.13.43 -* Tue May 02 2006 mgfritch(a)novell.com -- Add a second yes/no pop-up warning the user about deleting a VM. -- 2.13.42 -* Thu Apr 27 2006 mgfritch(a)novell.com -- If AMD Pacifica (svm) processor, architecture is x86_64 and full - virtualization, always write out 'cpus=0' (#169855) -- Don't reset all of the proposal settings when the virtualization - mode changes (#170028) -- 2.13.41 -* Wed Apr 26 2006 mgfritch(a)novell.com -- Specify the CD-ROM device name in the URL to be used for - extracting the kernel/initrd from a SUSE CD/DVD media. -- Always display the size of each disk in the disk overview table - regardless of it's type (loop-create, loop-use, or phys). -- Values on_reboot, on_crash, and on_poweroff must always be - rewritten to the config file when virtualization type is - full. (#168203) -- Strip off any query string before writing the "install=" - setting. (#169829) -- 2.13.40 -* Tue Apr 25 2006 mgfritch(a)novell.com -- Must always create new disk images when they are added as a new - disk to the table of disk images (#168206) -- Always Unmount the YaST ini agent before writing settings to a - config file (#168165) -- 2.13.39 -* Fri Apr 21 2006 mgfritch(a)novell.com -- Although console appears to be a tty, don't do character - translations (#149175) -- 2.13.38 -* Thu Apr 20 2006 mgfritch(a)novell.com -- domU has only one console (#167204) -- 2.13.37 -* Wed Apr 19 2006 mgfritch(a)novell.com -- SCR::Read(.target.dir, "/etc/xen/vm") instead of - SCR::Dir("/etc/xen/vm") to read list of used vm names (#165855) -- Can now extract the kernel and initrd using a SUSE ISO or - CD/DVD media. (#158529). -- 2.13.36 -* Fri Apr 14 2006 lslezak(a)suse.cz -- updated vm_finish client (#161720, #161721, #161756) -- pass static network configuration to linuxrc (#162713) -- 2.13.35 -* Wed Apr 12 2006 mgfritch(a)novell.com -- Launch the vncviewer using 'vncviewer localhost:<vm id>', - instead of using 'xm console <vmname>' (#165619) -- 2.13.34 -* Fri Apr 07 2006 lslezak(a)suse.cz -- don't modify bootloader configuration when confguring domain0, - it's modified by kernel-xen package (#163138) -- 2.13.33 -* Thu Apr 06 2006 mgfritch(a)novell.com -- Add dialog for managing virtual machines, similar to the - xm commands (xm list, xm create, xm destory, etc.) -- Add help text for MAC address and Bridge Name (#145663) -- Change Control Center icon name to 'Virtual Machine Management (Xen)'. -- Move Control Center icon from 'Software' catagory to 'System'. -- Various text string changes (help and UI). -- 2.13.32 -* Tue Apr 04 2006 lslezak(a)suse.cz -- dom0 configuration: modify firewall configuration - add the Xen - bridge into FW_FORWARD_ALWAYS_INOUT_DEV option (#154133), - fixed detection of a Xen section in bootloader -- 2.13.31 -* Wed Mar 29 2006 lslezak(a)suse.cz -- use "Xen" term only in the texts (#161737) -- 2.13.30 -* Tue Mar 28 2006 lslezak(a)suse.cz -- x86_64 arch: use x86_64 packages, not i386 (#161267) -- 2.13.29 -* Sat Mar 25 2006 ccoffing(a)novell.com -- Overhaul from Provo, to make module more feature complete. -- 2.13.28 -* Sat Mar 18 2006 jsrain(a)suse.de -- fixed size of image for AutoYaST profile (#159369) -- create mountpoint for autoinst.img (#159370) -- fixed writing AutoYaST image to domU config file -- add -F to mkfs.ext2 -* Fri Mar 10 2006 lslezak(a)suse.cz -- image directory is configurable now (#156591) -- check for existing config file, don't overwrite it (#156322) -- 2.13.27 -* Thu Mar 09 2006 lslezak(a)suse.cz -- merged proofread texts -- 2.13.26 -* Wed Mar 08 2006 lslezak(a)suse.cz -- fixed network configuration in full virtualization mode (#145064) -- 2.13.25 -* Wed Mar 08 2006 lslezak(a)suse.cz -- initialize package manager, source proposal fix (#152638) -- removed unused code (product detection) -- fixed network config reset -- 2.13.24 -* Wed Mar 08 2006 lslezak(a)suse.cz -- fixed capitalization in DHCP label and proposal text -- 2.13.23 -* Fri Mar 03 2006 lslezak(a)suse.cz -- display full file path and device prefix (#154016) -- 2.13.22 -* Mon Feb 27 2006 lslezak(a)suse.cz -- 2.13.21 -* Fri Feb 24 2006 lslezak(a)suse.cz -- new DHCP option in the network configuratino dialog (#153385) -- allow to boot from CD-ROM in full virtualization mode -* Thu Feb 23 2006 lslezak(a)suse.cz -- don't remove CD-ROM after reboot in full virtualization mode - (#145064) -* Tue Feb 21 2006 lslezak(a)suse.cz -- display warning in full virtualization mode if AutoYast - profile is configured -- check URL of an installation source -- fixed package download from an inst. source -- fixed crash due to uninitialized source (#150241) -- 2.13.20 -* Tue Feb 21 2006 lslezak(a)suse.cz -- check valid disk devices in full virtualization mode (#145064) -- .spec: removed yast2-devel-packages and yast2-users -* Fri Feb 17 2006 lslezak(a)suse.cz -- boot device configuration in full virtualization mode, - start VM in background (#145064) -- xen config file fixes -- 2.13.19 -* Mon Feb 13 2006 lslezak(a)suse.cz -- 2.13.18 -* Mon Feb 13 2006 lslezak(a)suse.cz -- validate domain name (only alphanumeric and _-.:+ characterrs - are allowed) (#150054) -* Mon Feb 13 2006 lslezak(a)suse.cz -- resize dom0 memory size if needed (#147612) -* Mon Feb 13 2006 lslezak(a)suse.cz -- start 2nd stage at background, finish yast module (#149665) -- show the network device config popup when adding new interface -* Mon Feb 13 2006 lslezak(a)suse.cz -- don't start VM when file downloading from source fails (#147428) -- initialize target (#150241) -* Mon Feb 13 2006 lslezak(a)suse.cz -- increased default disk image size to 4GB (#149604) -- generate default MAC address for network interface (#149177) -* Mon Feb 06 2006 lslezak(a)suse.cz -- full virtualization fix (use hvm loader and builder) -- write vif option correctly (#145390) -- allow non-network source -- suppose VM crash if runtime is lower than 3 sec -- 2.13.17 -* Wed Feb 01 2006 lslezak(a)suse.cz -- extract translatable strings from vm_install.xml control file - (#146651) -- 2.13.16 -* Mon Jan 30 2006 lslezak(a)suse.cz -- don't write obsoleted 'nics' options to domain configuration - file (#145390) -- 2.13.15 -* Wed Jan 25 2006 lslezak(a)suse.cz -- Use "RAM Disk" instead of "initrd" (#143673) -- 2.13.14 -* Mon Jan 23 2006 lslezak(a)suse.cz -- merged proofed texts -- 2.13.13 -* Fri Jan 20 2006 lslezak(a)suse.cz -- Improved help texts (#143669, #143672, #143674) -- Use "RAM Disk" instead of "initrd" (#143673) -- Fixes in the Full Virtualization mode -- Propose sparse images -- Create extra disk image for AutoYast profile -- 2.13.12 -* Tue Jan 17 2006 lslezak(a)suse.cz -- fixed .spec file (missing inst_xen_mode.ycp in the file list) -- 2.13.11 -* Fri Jan 13 2006 lslezak(a)suse.cz -- no network interfaces possible in virtual machine -- AutoYast profile selection is part of the proposal -- export selected installation source as URL in AutoYast -- configure Xen virtualization mode (paravirtualization or - full virtualization) (GUI only) -- 2.13.10 -* Wed Jan 11 2006 lslezak(a)suse.cz -- AutoYast client -- 2.13.9 -* Wed Jan 04 2006 lslezak(a)suse.cz -- install xen-tools package -- check whether kernel-xen and install-initrd packages - are available (#116395) -- fixed $URL_INSTALL macro expansion -- 2.13.8 -* Mon Dec 19 2005 jsuchome(a)suse.cz -- merged proofed texts -- 2.13.7 -* Fri Dec 16 2005 lslezak(a)suse.cz -- new client for Xen domain0 configuration (#117215) -- spelling fixes -- 2.13.6 -* Mon Dec 12 2005 lslezak(a)suse.cz -- removed UML support -- 2.13.5 -* Mon Dec 12 2005 lslezak(a)suse.cz -- custom kernel and RAM disk configuration -- workflow update for custom kernel -- renamed search variable -- new help texts + updates -- xen - configure more virtual network interfaces, allow to use - physical partition as storage, use existing disk image -- 2.13.4 -* Tue Nov 22 2005 lslezak(a)suse.cz -- installation boot parameter - boot option has been splitted into - two parts: boot option and additional installation boot option - (used only at the first stage, e.g. autoyast option) -- xen - configure restart option -- fixed error message (part of #117215) -- version 2.13.3 -* Fri Nov 11 2005 lslezak(a)suse.cz -- added command line mode support -- merged UML functionality (yast2-uml package can be dropped) -- uml - configure UMID option, um-host-install-initrd package - is not used any more (#96323) -- version 2.13.2 -* Fri Oct 14 2005 lslezak(a)suse.cz -- moved generic code to VM_Common:: -- proposal definition is part of the package -- version 2.13.1 -* Tue Sep 27 2005 lslezak(a)suse.cz -- install required X packages (xorg-x11, xterm) (#117660) -- write option ioemu for emulated disk (#117711) -- version 2.13.0 -* Mon Sep 19 2005 lslezak(a)suse.cz -- fixed 'Xen' spelling (#117226) -* Fri Sep 09 2005 lslezak(a)suse.cz -- write vif option properly into VM configuration file (#115791) -- don't start an installatinon without network source (#114740) -- 2.12.4 -* Fri Aug 26 2005 lslezak(a)suse.cz -- fixed layout of the tables (#112971) -- use arch dependend kernel-xen and install-initrd package -- reinitialize installtion sources -- fixed logging -- 2.12.3 -* Fri Aug 19 2005 lslezak(a)suse.cz -- use properly custom installation source -- mount partitions in virtual disk image -- search for kernel files, copy them to domain0 -- search for root device name -- update VM configuration file before starting the 2nd stage -- create link in /etc/xen/auto when 'on boot' start - mode is selected -- add TERM=xterm kernel option (to have colours in 2nd stage) -- 2.12.2 -* Fri Aug 12 2005 lslezak(a)suse.cz -- fixed creating of an installation initrd (#104339) -- fixed configuration update after reboot (after first - installation stage) -- 2.12.1 -* Fri Aug 12 2005 visnov(a)suse.cz -- fix textdomain -* Fri Aug 05 2005 lslezak(a)suse.cz -- initial release -- 2.12.0 ++++++ yast2-vm-2.16.10.tar.bz2 ++++++ ++++ 8673 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-vm-2.16.10/autodocs-ycp.ami new/yast2-vm-2.16.10/autodocs-ycp.ami --- old/yast2-vm-2.16.10/autodocs-ycp.ami 1970-01-01 01:00:00.000000000 +0100 +++ new/yast2-vm-2.16.10/autodocs-ycp.ami 2009-06-22 08:21:11.000000000 +0200 @@ -0,0 +1,27 @@ +# -*- makefile -*- Automake include file +# $Id: autodocs-ycp.ami 33394 2006-10-13 11:51:40Z mvidner $ + +# Builds source documentation for YCP sources +# Uses ycpdoc +# PARAMETERS: +# AUTODOCS_YCP: Files that the ycp autodocs is built from +# Optional - the default is $(srcdir)/../../src/*.ycp +# AUTODOCS_PM: Files that the perl autodocs is built from +# Optional - the default is $(srcdir)/../../src/*.pm + +htmldir = $(docdir)/autodocs + +html_DATA = index.html $(wildcard *.html) +CLEANFILES = $(html_DATA) pod2htm*.tmp + +AUTODOCS_YCP ?= $(wildcard $(srcdir)/../../src/*.ycp) +AUTODOCS_PM ?= $(wildcard $(srcdir)/../../src/*.pm) + +index.html: $(AUTODOCS_YCP) $(AUTODOCS_PM) +#including *.pm, for the index + ${YCPDOC} -d. $^ + for i in $(AUTODOCS_PM); do \ + b=`basename $$i`; b=$${b%.pm}; \ + pod2html --title=$$b --infile=$$i --outfile=$$b.html; \ + echo "<a href='$$b.html'>$$b</a>" > $$b.mod.html; \ + done diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-vm-2.16.10/configure.in new/yast2-vm-2.16.10/configure.in --- old/yast2-vm-2.16.10/configure.in 2008-09-22 23:46:52.000000000 +0200 +++ new/yast2-vm-2.16.10/configure.in 2009-06-22 08:21:11.000000000 +0200 @@ -1,9 +1,9 @@ dnl configure.in for yast2-vm dnl -dnl -- This file is generated by y2autoconf 2.13.18 - DO NOT EDIT! -- +dnl -- This file is generated by y2autoconf 2.18.5 - DO NOT EDIT! -- dnl (edit configure.in.in instead) -AC_INIT(yast2-vm, 2.16.5, http://bugs.opensuse.org/, yast2-vm) +AC_INIT(yast2-vm, 2.16.10, http://bugs.opensuse.org/, yast2-vm) dnl Check for presence of file 'RPMNAME' AC_CONFIG_SRCDIR([RPMNAME]) @@ -14,10 +14,11 @@ AC_PREFIX_DEFAULT(/usr) -AM_INIT_AUTOMAKE(tar-ustar) dnl searches for some needed programs +dnl long filenames; we use GNU Make extensions and that's ok +AM_INIT_AUTOMAKE(tar-ustar -Wno-portability) dnl Important YaST2 variables -VERSION="2.16.5" +VERSION="2.16.10" RPMNAME="yast2-vm" MAINTAINER="Ladislav Slezak <lslezak(a)suse.cz>" @@ -107,9 +108,11 @@ dnl no need for AC_ARG_VAR AC_PATH_PROG(XGETTEXT, xgettext) if test -z "$XGETTEXT" ; then - AC_MSG_ERROR(xgettext is missing; please install gettext-devel.) + AC_MSG_ERROR(xgettext is missing; please install gettext-tools.) fi +Y2DEVTOOLS_PREFIX=`pkg-config --print-errors --variable=prefix yast2-devtools` +AC_SUBST(Y2DEVTOOLS_PREFIX) devtools_ybindir=`pkg-config --print-errors --variable=ybindir yast2-devtools` devtools_yast2dir=`pkg-config --print-errors --variable=yast2dir yast2-devtools` @@ -142,6 +145,9 @@ if test "$YCPC" = "false"; then AC_MSG_ERROR([ycpc is not installed]) fi +AC_CHECK_FILE($devtools_yast2dir/data/testsuite/Makefile.testsuite, [], [ + AC_MSG_WARN([yast2-testsuite.rpm is not installed]) +]) ( cd control; diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-vm-2.16.10/COPYRIGHT.english new/yast2-vm-2.16.10/COPYRIGHT.english --- old/yast2-vm-2.16.10/COPYRIGHT.english 2009-04-01 21:46:10.000000000 +0200 +++ new/yast2-vm-2.16.10/COPYRIGHT.english 1970-01-01 01:00:00.000000000 +0100 @@ -1,340 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Library General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -convey the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - <one line to give the program's name and a brief idea of what it does.> - Copyright (C) <year> <name of author> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - -Also add information on how to contact you by electronic and paper mail. - -If the program is interactive, make it output a short notice like this -when it starts in an interactive mode: - - Gnomovision version 69, Copyright (C) year name of author - Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, the commands you use may -be called something other than `show w' and `show c'; they could even be -mouse-clicks or menu items--whatever suits your program. - -You should also get your employer (if you work as a programmer) or your -school, if any, to sign a "copyright disclaimer" for the program, if -necessary. Here is a sample; alter the names: - - Yoyodyne, Inc., hereby disclaims all copyright interest in the program - `Gnomovision' (which makes passes at compilers) written by James Hacker. - - <signature of Ty Coon>, 1 April 1989 - Ty Coon, President of Vice - -This General Public License does not permit incorporating your program into -proprietary programs. If your program is a subroutine library, you may -consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Library General -Public License instead of this License. diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-vm-2.16.10/doc/autodocs/Makefile.am new/yast2-vm-2.16.10/doc/autodocs/Makefile.am --- old/yast2-vm-2.16.10/doc/autodocs/Makefile.am 2008-09-22 23:06:56.000000000 +0200 +++ new/yast2-vm-2.16.10/doc/autodocs/Makefile.am 2009-06-16 09:42:07.000000000 +0200 @@ -1,10 +1,3 @@ -# Makefile.am for devtools/devtools/skeletons/config/doc/autodocs +# Makefile.am for YCP module .../doc/autodocs -htmldir = $(docdir)/autodocs - -index.html: $(srcdir)/../../src/*.ycp - $(ybindir)/ycpdoc -d. $(srcdir)/../../src/*.ycp - -html_DATA = index.html $(wildcard *.html) - -CLEANFILES = $(html_DATA) +include $(top_srcdir)/autodocs-ycp.ami diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-vm-2.16.10/Makefile.am new/yast2-vm-2.16.10/Makefile.am --- old/yast2-vm-2.16.10/Makefile.am 2008-09-22 23:46:52.000000000 +0200 +++ new/yast2-vm-2.16.10/Makefile.am 2009-06-22 08:21:11.000000000 +0200 @@ -7,8 +7,7 @@ # #where devtools are -PREFIX := $(shell pkg-config --print-errors --variable=prefix yast2-devtools) -Y2TOOL = $(PREFIX)/bin/y2tool +Y2TOOL = $(Y2DEVTOOLS_PREFIX)/bin/y2tool VERSION = $(shell cat $(srcdir)/VERSION) RPMNAME = $(shell cat $(srcdir)/RPMNAME) @@ -20,22 +19,23 @@ # do we do Makefile.am for devtools? It is a little special... IS_DEVTOOLS = $(findstring yast2-devtools,$(RPMNAME)) -DEVTOOLS_DIR = $(if $(IS_DEVTOOLS),$(srcdir)/devtools,$(PREFIX)/share/YaST2/data/devtools) +DEVTOOLS_DIR = $(if $(IS_DEVTOOLS),$(srcdir)/devtools,$(Y2DEVTOOLS_PREFIX)/share/YaST2/data/devtools) ALL_PACKAGES = $(DEVTOOLS_DIR)/admin/all-packages LEGALESE_DIR = $(if $(HAS_YAST_LICENSE),$(DEVTOOLS_DIR)/admin/copyright/yast,$(DEVTOOLS_DIR)/admin/copyright/gpl) -COPYRIGHT_files_gpl = README COPYING COPYRIGHT.english +COPYRIGHT_files_gpl = README COPYING COPYRIGHT_files_yast = YAST_LICENSE README COPYING COPYRIGHT.english \ COPYRIGHT.french COPYRIGHT.german COPYRIGHT.spanish extra_COPYRIGHT_files = $(if $(HAS_YAST_LICENSE), $(COPYRIGHT_files_yast), $(COPYRIGHT_files_gpl)) -AUTOMAKE_OPTIONS = foreign dist-bzip2 -# where devtools instal m4 snippets +# less strict; prefer bzip2 +AUTOMAKE_OPTIONS = foreign dist-bzip2 no-dist-gzip +# where devtools install m4 snippets # argh, executed literally -#ACLOCAL_AMFLAGS = -I $(PREFIX)/share/aclocal -ACLOCAL_AMFLAGS = -I `if test -d ./devtools/admin; then echo ./devtools/admin; else pkg-config --print-errors --variable=datadir yast2-devtools; fi`/aclocal +#ACLOCAL_AMFLAGS = -I $(Y2DEVTOOLS_PREFIX)/share/aclocal +ACLOCAL_AMFLAGS = -I . -I `if test -d ./devtools/admin; then echo ./devtools/admin; else pkg-config --print-errors --variable=datadir yast2-devtools; fi`/aclocal Makefile.am.common: $(DEVTOOLS_DIR)/admin/Makefile.am.common cmp -s $< $@ || cp -f $< $@ @@ -67,7 +67,7 @@ # because the prerequisite is made here (not anymore!) # and we don't want any paths in y2autoconf # info '(autoconf)config.status Invocation' -$(RPMNAME).pc: $(RPMNAME).pc.in +$(RPMNAME).pc: $(RPMNAME).pc.in config.status ./config.status --file=$@:$< if CREATE_PKGCONFIG_NOARCH @@ -211,8 +211,7 @@ # For po/ modules checkpo: - test ! -d $(srcdir)/po || $(MAKE) -C po checkpo -# test ! -d $(srcdir)/po \ -# || { $(MAKE) -C po checkpo && $(MAKE) -C po make-pox; } + test ! -f $(srcdir)/po/Makefile || $(MAKE) -C po checkpo +# test ! -f $(srcdir)/po/Makefile || $(MAKE) -C po checkpo make-pox # No ./SUBDIRS file found - assuming default: All direct subdirs with Makefile.am SUBDIRS = doc src diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-vm-2.16.10/Makefile.am.common new/yast2-vm-2.16.10/Makefile.am.common --- old/yast2-vm-2.16.10/Makefile.am.common 2008-09-22 23:46:52.000000000 +0200 +++ new/yast2-vm-2.16.10/Makefile.am.common 2009-06-22 08:21:11.000000000 +0200 @@ -29,7 +29,19 @@ dist-hook: check-syntax +CHECK_SYNTAX = true check-syntax: $(client_DATA) $(ycpchook) - if test "$(client_DATA)"; then $(bindir)/ycpc -qE -M. -I. $(YCPCFLAGS) $(filter %.ycp,$^) || exit 1; fi + @if test "$(client_DATA)"; then \ + if $(CHECK_SYNTAX); then \ + TO_CHECK="$(filter %.ycp,$^)"; \ + echo "Checking syntax of $${TO_CHECK}"; \ + if ! $(YCPC) -qE -M. -I. $(YCPCFLAGS) $${TO_CHECK}; then \ + echo "Failed. Disable by 'make ... CHECK_SYNTAX=false' at your own risk"; \ + exit 1; \ + fi; \ + else \ + echo "Syntax check disabled"; \ + fi; \ + fi -include .dep diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-vm-2.16.10/missing new/yast2-vm-2.16.10/missing --- old/yast2-vm-2.16.10/missing 2008-09-22 23:46:58.000000000 +0200 +++ new/yast2-vm-2.16.10/missing 2009-06-22 08:21:15.000000000 +0200 @@ -1,9 +1,9 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -scriptversion=2005-06-08.21 +scriptversion=2006-05-10.23 -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006 # Free Software Foundation, Inc. # Originally by Fran,cois Pinard <pinard(a)iro.umontreal.ca>, 1996. @@ -33,6 +33,8 @@ fi run=: +sed_output='s/.* --output[ =]$[^ ]*$.*/\1/p' +sed_minuso='s/.* -o $[^ ]*$.*/\1/p' # In the cases where this matters, `missing' is being run in the # srcdir already. @@ -44,7 +46,7 @@ msg="missing on your system" -case "$1" in +case $1 in --run) # Try to run requested program, and just exit if it succeeds. run= @@ -77,6 +79,7 @@ aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' + autom4te touch the output file, or create a stub one automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c @@ -106,7 +109,7 @@ # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect # the program). -case "$1" in +case $1 in lex|yacc) # Not GNU programs, they don't have --version. ;; @@ -135,7 +138,7 @@ # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. -case "$1" in +case $1 in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if @@ -164,7 +167,7 @@ test -z "$files" && files="config.h" touch_files= for f in $files; do - case "$f" in + case $f in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; @@ -192,8 +195,8 @@ You can get \`$1' as part of \`Autoconf' from any GNU archive site." - file=`echo "$*" | sed -n 's/.*--output[ =]*$[^ ]*$.*/\1/p'` - test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*$[^ ]*$.*/\1/p'` + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else @@ -214,25 +217,25 @@ in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h - if [ $# -ne 1 ]; then + if test $# -ne 1; then eval LASTARG="\${$#}" - case "$LASTARG" in + case $LASTARG in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.h fi ;; esac fi - if [ ! -f y.tab.h ]; then + if test ! -f y.tab.h; then echo >y.tab.h fi - if [ ! -f y.tab.c ]; then + if test ! -f y.tab.c; then echo 'main() { return 0; }' >y.tab.c fi ;; @@ -244,18 +247,18 @@ in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c - if [ $# -ne 1 ]; then + if test $# -ne 1; then eval LASTARG="\${$#}" - case "$LASTARG" in + case $LASTARG in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" lex.yy.c fi ;; esac fi - if [ ! -f lex.yy.c ]; then + if test ! -f lex.yy.c; then echo 'main() { return 0; }' >lex.yy.c fi ;; @@ -267,11 +270,9 @@ \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." - file=`echo "$*" | sed -n 's/.*-o $[^ ]*$.*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed -n 's/.*--output=$[^ ]*$.*/\1/p'` - fi - if [ -f "$file" ]; then + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then touch $file else test -z "$file" || exec >$file @@ -289,11 +290,17 @@ DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n 's/.*-o $[^ ]*$.*/\1/p'` + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* $[^ ]*$ *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* $[^ ]*$ *$/\1/; p; q; }' $infile` + file=`sed -n ' + /^@setfilename/{ + s/.* $[^ ]*$ *$/\1/ + p + q + }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi @@ -317,13 +324,13 @@ fi firstarg="$1" if shift; then - case "$firstarg" in + case $firstarg in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac - case "$firstarg" in + case $firstarg in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-vm-2.16.10/README new/yast2-vm-2.16.10/README --- old/yast2-vm-2.16.10/README 2009-04-01 21:46:10.000000000 +0200 +++ new/yast2-vm-2.16.10/README 2009-06-22 08:21:17.000000000 +0200 @@ -1,2 +1,2 @@ This program/library is part of YaST2 -See the file COPYRIGHT.english for license terms +See the file COPYING for license terms diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-vm-2.16.10/src/xen.ycp new/yast2-vm-2.16.10/src/xen.ycp --- old/yast2-vm-2.16.10/src/xen.ycp 2008-09-22 23:06:57.000000000 +0200 +++ new/yast2-vm-2.16.10/src/xen.ycp 2009-04-29 12:58:09.000000000 +0200 @@ -24,7 +24,7 @@ * Summary: Main virtual machine installation/management * Authors: Michael G. Fritch <mgfritch(a)novell.com> * - * $Id$ + * $Id: xen.ycp 57028 2009-04-29 10:58:09Z lslezak $ */ { ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit sax2 for openSUSE:Factory
by root＠Hilbert.suse.de 29 Jun '09

29 Jun '09

Hello community, here is the log from the commit of package sax2 for openSUSE:Factory checked in at Mon Jun 29 17:38:55 CEST 2009. -------- --- sax2/sax2.changes 2009-06-19 11:50:00.000000000 +0200 +++ sax2/sax2.changes 2009-06-24 16:44:59.000000000 +0200 @@ -1,0 +2,5 @@ +Wed Jun 24 16:30:29 CEST 2009 - sndirsch(a)suse.de + +- updated translations from LCN SVN (20090624) + +------------------------------------------------------------------- calling whatdependson for head-i586 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ sax2.spec ++++++ --- /var/tmp/diff_new_pack.u16837/_old 2009-06-29 17:38:32.000000000 +0200 +++ /var/tmp/diff_new_pack.u16837/_new 2009-06-29 17:38:32.000000000 +0200 @@ -50,7 +50,7 @@ PreReq: /bin/rm /bin/mkdir /usr/bin/chroot %fillup_prereq %insserv_prereq Summary: SuSE advanced X Window System-configuration Version: 8.1 -Release: 574 +Release: 575 Group: System/X11/Utilities License: GPL v2 or later Source: sax2.tar.bz2 ++++++ sax2.tar.bz2 ++++++ ++++ 26037 lines of diff (skipped) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit yast2-trans for openSUSE:Factory
by root＠Hilbert.suse.de 29 Jun '09

29 Jun '09

Hello community, here is the log from the commit of package yast2-trans for openSUSE:Factory checked in at Mon Jun 29 17:38:13 CEST 2009. -------- --- yast2-trans/yast2-trans.changes 2009-06-09 15:12:27.000000000 +0200 +++ yast2-trans/yast2-trans.changes 2009-06-25 07:21:53.000000000 +0200 @@ -1,0 +2,5 @@ +Thu Jun 25 07:01:37 CEST 2009 - ke(a)suse.de + +- Updated languages: es et fi fr gl ko nl pl sk pt_BR. + +------------------------------------------------------------------------ calling whatdependson for head-i586 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ yast2-trans.spec ++++++ --- /var/tmp/diff_new_pack.n11774/_old 2009-06-29 17:37:15.000000000 +0200 +++ /var/tmp/diff_new_pack.n11774/_new 2009-06-29 17:37:15.000000000 +0200 @@ -20,7 +20,7 @@ Name: yast2-trans Version: 2.18.1 -Release: 7 +Release: 8 License: GPL v2 or later Group: System/YaST BuildRoot: %{_tmppath}/%{name}-%{version}-build @@ -1242,26 +1242,3 @@ #@FILES@ %changelog -* Tue Jun 09 2009 ke(a)suse.de -- Updated languages: be da es fi fr gl hu ja km nl pl pt ru sk uk pt_BR. -* Mon May 18 2009 ke(a)suse.de -- Updated languages: de fi gl ja nl sk. -* Sat May 16 2009 jmp(a)opensuse.org -- Updated languages: fi -* Fri May 15 2009 ke(a)suse.de -- Updated languages: fi, sk, and uk. -* Fri May 08 2009 ke(a)suse.de -- Updated languages: fi and sk. -* Thu Apr 30 2009 ke(a)suse.de -- Updated languages: de es fi gl hr it ko nl pl ro ru sk pt_BR zh_CN, - maybe more. -* Fri Apr 03 2009 ke(a)suse.de -- Updated languages: de es fi hr hu ja ka ko ku nl pl ro uk wa pt_BR. -* Mon Mar 16 2009 ke(a)suse.de -- Updated languages: af am ar be bg bn bs ca cs cy da de el es et fa - fi fr gl gu he hi hr hu id it ja jv ka km ko ku lo lt mk mr ms my nb nl - pa pl pt ro ru si sk sl sr sv sw ta th tk tr uk vi wa xh zu en_GB en_US - pt_BR zh_CN zh_TW. -* Wed Feb 25 2009 ke(a)suse.de -- New package layout: yast2-trans contains all yast2-trans-* packages as - sub-packages. ++++++ yast2-trans-es-2.18.1.tar.bz2 ++++++ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-es-2.18.1/po/control.es.po new/yast2-trans-es-2.18.1/po/control.es.po --- old/yast2-trans-es-2.18.1/po/control.es.po 2009-06-05 13:40:24.000000000 +0200 +++ new/yast2-trans-es-2.18.1/po/control.es.po 2009-06-24 14:49:33.000000000 +0200 @@ -10,19 +10,20 @@ # Lluis Martinez <lmartinez(a)sct.ictnet.es>, 2008. # Luis Martinez <lmartinez(a)sct.ictnet.es>, 2008. # Alfredo Beltramo <balfred(a)dimagin.net>, 2008. +# Javier Llorente <javier(a)opensuse.org>, 2009. msgid "" msgstr "" "Project-Id-Version: control\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-06-05 10:40+0200\n" -"PO-Revision-Date: 2008-12-10 14:51-0400\n" -"Last-Translator: Ricardo Varas Santana <rvaras81(a)yahoo.com>\n" +"PO-Revision-Date: 2009-06-12 20:00+0200\n" +"Last-Translator: Javier Llorente <javier(a)opensuse.org>\n" "Language-Team: Spanish <opensuse-translation-es(a)opensuse.org>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: KBabel 1.11.4\n" +"X-Generator: Lokalize 0.3\n" "X-Poedit-Language: Spanish\n" # include/ui/wizard_dialog.ycp:145 include/ui/wizard_dialog.ycp:203 @@ -264,10 +265,8 @@ #: control/control.SLED.glade:657 control/control.SLES.glade:789 #: control/control.openSUSE.glade:751 -#, fuzzy -#| msgid "&Repair" msgid "Repair" -msgstr "&Reparar" +msgstr "Reparar" # clients/inst_sw_single.ycp:1512 # clients/inst_sw_single.ycp:1626 @@ -474,7 +473,7 @@ #: control/control.SLES.glade:310 msgid "Physical Machine (Also for Fully Virtualized Guests)" -msgstr "Máquina física (También para invitados virtualizados completamente)" +msgstr "Máquina física (También para invitados completamente virtualizados)" #: control/control.SLES.glade:311 msgid "Virtual Machine (For Paravirtualized Environments Like Xen)" @@ -482,7 +481,7 @@ #: control/control.SLES.glade:312 msgid "Xen Virtualization Host (Local X11 Not Configured by Default)" -msgstr "Equipo de virtualización Xen (X11 local no se encuentra configurado por omisión)" +msgstr "Equipo de virtualización Xen (X11 local no se encuentra configurado por defecto)" # clients/inst_sw_single.ycp:1118 clients/inst_sw_single.ycp:1210lideShow.ycp:983 #: control/control.SLES.glade:710 control/control.glade:288 @@ -525,10 +524,10 @@ msgstr "" "\n" "¡Enhorabuena!\n" -"Se ha completado la instalación de &product; en el equipo.\n" +"Se ha completado la instalación de &product; en su equipo.\n" "Tras pulsar Terminar, podrá entrar en el sistema.\n" "Visítenos en %1.\n" -"¡Que lo disfrute! El equipo de desarrollo de openSUSE\n" +"Have a lot of fun! El equipo de desarrollo de openSUSE\n" "\t" # clients/inst_choose_desktop.ycp:250 clients/inst_choose_desktop.ycp:574 clients/inst_sunfb.ycp:309 @@ -555,7 +554,7 @@ "Se ha completado la instalación de openSUSE en su equipo.\n" "Tras pulsar Terminar, podrá iniciar la sesión en el sistema.\n" "Visítenos en %1.\n" -"¡Que lo disfrute! El equipo de desarrollo de openSUSE\n" +"Have a lot of fun! El equipo de desarrollo de openSUSE\n" "\t " #: control/control.openSUSE.glade:376 @@ -566,9 +565,9 @@ " \n" "As desktop selection is a matter of taste, we do not give a recommendation." msgstr "" -"openSUSE ofrece una selección de interfaces de usuario. Los dos escritorios más \n" -"completos son KDE y GNOME. Ambos proveen un entorno fácil de utilizar con \n" -"una completa suit de aplicaciones que incluye, correo electrónico, administrador de archivos, juegos y utilidades.\n" +"openSUSE ofrece una selección de interfaces de usuario. Los dos escritorios completos más \n" +"importantes son KDE y GNOME. Ambos proveen un entorno fácil de utilizar con \n" +"un completo conjunto de aplicaciones que incluye correo electrónico, administrador de archivos, juegos y utilidades.\n" "\n" "La elección de un escritorio es cuestión de gustos, por lo que no podemos darle ninguna recomendación." @@ -599,9 +598,6 @@ #: control/control.openSUSE.glade:394 #, fuzzy -#| msgid "" -#| "GNOME 2.24 is the latest desktop from the GNOME Project. \n" -#| "It combines stability and maturity with incremental innovations." msgid "" "GNOME 2.28 is the latest desktop from the GNOME Project. \n" "It combines stability and maturity with incremental innovations." @@ -611,10 +607,6 @@ #: control/control.openSUSE.glade:400 #, fuzzy -#| msgid "" -#| "KDE 4.1 is the latest stable desktop released by the KDE Project.\n" -#| "It delivers an innovative, highly integrated desktop environment\n" -#| "with a modern look and feel." msgid "" "KDE 4.3 is the latest stable desktop released by the KDE Project.\n" "It delivers an innovative, highly integrated desktop environment\n" diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-es-2.18.1/po/oneclickinstall.es.po new/yast2-trans-es-2.18.1/po/oneclickinstall.es.po --- old/yast2-trans-es-2.18.1/po/oneclickinstall.es.po 2009-06-05 13:41:41.000000000 +0200 +++ new/yast2-trans-es-2.18.1/po/oneclickinstall.es.po 2009-06-24 14:50:29.000000000 +0200 @@ -2,23 +2,25 @@ # Copyright (C) 2005 SUSE Linux Products GmbH. # Copyright (C) 2002, 2003 SuSE Linux AG. # Copyright (C) 1999, 2000, 2001 SuSE GmbH. +# # Ibán josé García Castillo <Iban.Garcia(a)alufis35.uv.es>, 2000. # Javier Moreno <javier.moreno(a)alufis35.uv.es>, 2000. # Jordi Jaen Pallares <jordi(a)suse.de>, 1999, 2000, 2001. # Pablo Iranzo Gómez <Pablo.Iranzo(a)uv.es>, 2000. -# +# Javier Llorente <javier(a)opensuse.org>, 2009. msgid "" msgstr "" "Project-Id-Version: YaST (@memory@)\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-06-05 10:41+0200\n" -"PO-Revision-Date: 2003-02-12 10:23+0100\n" -"Last-Translator: Pablo Iranzo Gómez <Pablo.Iranzo(a)uv.es>\n" -"Language-Team: Spanish <i18n(a)suse.de>\n" +"PO-Revision-Date: 2009-06-12 21:37+0200\n" +"Last-Translator: Javier Llorente <javier(a)opensuse.org>\n" +"Language-Team: Spanish <opensuse-translation-es(a)opensuse.org>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" +"X-Generator: Lokalize 0.3\n" #: src/OneClickInstallCLI.ycp:23 msgid "Error: Nothing to do specified in the YMP file" @@ -27,12 +29,12 @@ # include/printconf/dialogs.ycp:1787 #: src/OneClickInstallCLI.ycp:29 msgid "If you continue, the following repositories will be subscribed:" -msgstr "Si continua, se agregarán los siguientes repositorios:" +msgstr "Si continúa, se añadirán los siguientes repositorios:" # include/printconf/dialogs.ycp:1787 #: src/OneClickInstallCLI.ycp:39 msgid "If you continue, the following software packages will be installed:" -msgstr "Si elige continuar, los siguientes paquetes serán instalados:" +msgstr "Si continúa, se instalarán los siguientes paquetes:" #: src/OneClickInstallCLI.ycp:61 #, ycp-format @@ -91,7 +93,7 @@ # clients/printconf.ycp:371 #: src/OneClickInstallCLI.ycp:131 msgid "Warning: Unable to remove temporarily added repositories." -msgstr "Atención: No ha sido posible eliminar los repositorios temporales." +msgstr "Atención: No se han podido eliminar los repositorios añadidos temporalmente." #: src/OneClickInstallCLI.ycp:134 msgid "Finished" @@ -103,7 +105,7 @@ #: src/OneClickInstallCLI.ycp:159 msgid "One Click Install Command Line Installer" -msgstr "Línea de Comando de One Click Install" +msgstr "Instalador de One Click Install en línea de comandos" # clients/online_update_load.ycp:1004 #: src/OneClickInstallCLI.ycp:165 src/OneClickInstallCLI.ycp:170 @@ -120,7 +122,7 @@ #: src/OneClickInstallCLI.ycp:188 msgid "File containing internal representation of One Click Install instructions" -msgstr "Archivo conteniendo la representación interna de las instrucciones de One Click Install" +msgstr "Archivo que contiene la representación interna de las instrucciones de One Click Install" #. * <region name="String constants"> * #: src/OneClickInstallUI.ycp:42 @@ -229,7 +231,7 @@ #: src/OneClickInstallWidgets.ycp:69 msgid "Please wait while this software is being installed." -msgstr "Por favor, aguarde mientras se instala el software." +msgstr "Por favor, espere mientras se instala el software." #: src/OneClickInstallWidgets.ycp:105 msgid "Repository Description:" @@ -244,8 +246,8 @@ "Have you reviewed the changes that will be made to your system?\n" "Malicious packages could damage your system.\n" msgstr "" -"¿Ha comprobado los cambios que se realizarán en su sistema?\n" -"Paquetes maliciosos podrían dañar su sistema.\n" +"¿Ha revisado los cambios que se realizarán en su sistema?\n" +"Los paquetes maliciosos podrían dañar su sistema.\n" # clients/online_update.ycp:43 #: src/OneClickInstallWidgets.ycp:230 @@ -254,7 +256,7 @@ #: src/OneClickInstallWidgets.ycp:281 msgid "These repositories will only be added during installation. You will not remain subscribed." -msgstr "Estos repositorios serán añadidos únicamente durante la instalación. No permanecerá suscripto." +msgstr "Estos repositorios se añadirán únicamente durante la instalación. No permanecerá suscrito." #: src/OneClickInstallWidgets.ycp:284 msgid "You will remain subscribed to these repositories after installation." @@ -263,7 +265,7 @@ # include/printconf/dialogs.ycp:1787 #: src/OneClickInstallWidgets.ycp:288 msgid "If you continue, the following changes will be made to your system:" -msgstr "Si continua se realizarán los siguientes cambios en su sistema:" +msgstr "Si continúa, se realizarán los siguientes cambios en su sistema:" #: src/OneClickInstallWidgets.ycp:293 msgid "Software to be removed:" @@ -271,7 +273,7 @@ #: src/OneClickInstallWidgets.ycp:299 msgid "Repositories to be added:" -msgstr "Repositorios que se agregarán:" +msgstr "Repositorios que se añadirán:" #: src/OneClickInstallWidgets.ycp:300 msgid "Note:" @@ -308,7 +310,7 @@ #: src/OneClickInstallWidgets.ycp:396 msgid "The installation has failed. For more information, see the log file at <tt>/var/log/YaST2/y2log</tt>. Failure stage was: " -msgstr "La instalación ha fallado, consulte el archivo de registro en <tt>/var/log/YaST2/y2log</tt> para más información. La fase en la que se produjo el fallo fue: " +msgstr "La instalación ha fallado. Para más información, consulte el archivo de registro en <tt>/var/log/YaST2/y2log</tt>. La fase en la que se produjo el fallo fue: " #: src/OneClickInstallWidgets.ycp:397 msgid "Error Message" @@ -345,7 +347,7 @@ #: src/OneClickInstallWorker.ycp:123 msgid "An error occurred while attempting to unsubscribe from the repositories that were used to perform the installation. You can remove them manually in YaST > Software Repositories. Review the yast2 logs for more information." -msgstr "Error al intentar eliminar la suscripción a los repositorios que se usaron para realizar las instalación. Puede eliminar las suscripciones manualmente en YaST > Repositorios de Software. Consulte los registros de yast2 para más información." +msgstr "Error al intentar eliminar la suscripción a los repositorios que se usaron para realizar las instalación. Puede eliminar las suscripciones manualmente en YaST > Repositorios de software. Consulte los registros de yast2 para más información." #: src/OneClickInstallWorker.ycp:132 msgid "No error occurred." @@ -353,16 +355,16 @@ #: src/OneClickInstallWorkerFunctions.ycp:95 msgid "Loading Package Management" -msgstr "Cargando gestor de paquetes" +msgstr "Cargando el gestor de paquetes" #: src/OneClickInstallWorkerFunctions.ycp:100 #, ycp-format msgid "Adding repository %1" -msgstr "Agregando repositorio %1" +msgstr "Añadiendo el repositorio %1" #: src/OneClickInstallWorkerFunctions.ycp:116 msgid "An error occurred while initializing the software repository." -msgstr "Ocurrió un error mientras se inicializaba el repositorio." +msgstr "Se produjo un fallo mientras se inicializaba el repositorio." # clients/inst_sw_select.ycp:257les/SlideShow.ycp:1093 #: src/OneClickInstallWorkerFunctions.ycp:116 @@ -379,12 +381,12 @@ #: src/OneClickInstallWorkerFunctions.ycp:172 #, ycp-format msgid "Marking package %1 for installation" -msgstr "Marcando paquete %1 para su instalación" +msgstr "Marcando el paquete %1 para su instalación" #: src/OneClickInstallWorkerFunctions.ycp:193 #, ycp-format msgid "Warning: package %1 could not be installed." -msgstr "Atención: el paquete %1 no pudo se instalado." +msgstr "Advertencia: no se pudo instalar el paquete %1." #: src/OneClickInstallWorkerFunctions.ycp:206 msgid "Performing Installation..." @@ -393,7 +395,7 @@ #: src/OneClickInstallWorkerFunctions.ycp:234 #, ycp-format msgid "Warning: pattern %1 could not be installed." -msgstr "Atención: el patrón %1 no pudo ser instalado." +msgstr "Atención: no se pudo instalar el patrón %1." #: src/OneClickInstallWorkerResponse.ycp:7 msgid "unknown" @@ -401,4 +403,4 @@ #: src/OneClickInstallWorkerResponse.ycp:8 msgid "Root privileges are required. Either they were not supplied, or an unknown error occurred." -msgstr "Se requieren privilegios de administrador (root), o estos no han sido provistos u ocurrió un error desconocido." +msgstr "Se requieren privilegios de administrador (root), o estos no han sido provistos o se produjo un error desconocido." diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-es-2.18.1/po/status.txt new/yast2-trans-es-2.18.1/po/status.txt --- old/yast2-trans-es-2.18.1/po/status.txt 2009-06-09 14:52:50.000000000 +0200 +++ new/yast2-trans-es-2.18.1/po/status.txt 2009-06-24 14:51:32.000000000 +0200 @@ -1,5 +1,5 @@ -Translated : 19431 -Fuzzy : 421 +Translated : 19432 +Fuzzy : 420 Untranslated : 146 -------------------- All strings : 19998 ++++++ yast2-trans-et-2.18.1.tar.bz2 ++++++ ++++ 36247 lines of diff (skipped) ++++++ yast2-trans-fi-2.18.1.tar.bz2 ++++++ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-fi-2.18.1/po/control-center.fi.po new/yast2-trans-fi-2.18.1/po/control-center.fi.po --- old/yast2-trans-fi-2.18.1/po/control-center.fi.po 2009-06-05 13:47:26.000000000 +0200 +++ new/yast2-trans-fi-2.18.1/po/control-center.fi.po 2009-06-24 14:56:08.000000000 +0200 @@ -12,13 +12,14 @@ # Jami Saarikoski <jami.saarikoski(a)gmail.com>, 2006. # Jyri Palokangas <jmp(a)opensuse.fi>, 2007. # Mikko Piippo <piippo(a)opensuse.fi>, 2008. +# Asko Isonokari <askoin(a)netsonic.fi>, 2009. msgid "" msgstr "" "Project-Id-Version: control-center\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-06-05 10:37+0200\n" -"PO-Revision-Date: 2008-04-18 17:38+0300\n" -"Last-Translator: Mikko Piippo <piippo(a)opensuse.fi>\n" +"PO-Revision-Date: 2009-06-19 16:53+0300\n" +"Last-Translator: Asko Isonokari <askoin(a)netsonic.fi>\n" "Language-Team: <fi(a)li.org>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -204,9 +205,9 @@ "if the latter is the case, try to run the Control Center as root. \n" "Also make sure that you do not run out of disk space. " msgstr "" -"Jos tilanteesi on edellinen, asenna uudelleen kaikki YaST2:n osat;\n" -"jos jälkimmäinen, suorita Ohjauskeskus pääkäyttäjänä. \n" -"Varmista myös, että levytila ei ole lopussa. " +"Jos tilanteesi on kuten edellä kuvattu, asenna uudelleen kaikki YaST2:n osat;\n" +"jos kuten jälkimmäinen, suorita Ohjauskeskus pääkäyttäjänä. \n" +"Varmista myös, että levytila ei lopu kesken. " #: src/yastmodules.cpp:145 src/yastmodules.cpp:177 msgid "Directory %1 does not exist." diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-fi-2.18.1/po/control.fi.po new/yast2-trans-fi-2.18.1/po/control.fi.po --- old/yast2-trans-fi-2.18.1/po/control.fi.po 2009-06-09 14:24:00.000000000 +0200 +++ new/yast2-trans-fi-2.18.1/po/control.fi.po 2009-06-24 14:56:10.000000000 +0200 @@ -1,4 +1,3 @@ -# translation of control.fi.po to suomi # translation of control.po to # translation of control.fi.po to # Finnish message file for YaST2 (@memory@). @@ -8,19 +7,20 @@ # Jyri Palokangas <jmp(a)netti.fi>, 2005, 2006, 2007. # Joonas Niilola <joonas.niilola(a)roskakori.org>, 2006. # Ari Österholm <ari.osterholm(a)nbl.fi>, 2007. -# Jyri Palokangas <jmp(a)opensuse.fi>, 2007, 2008, 2009. +# Jyri Palokangas <jmp(a)opensuse.fi>, 2007, 2008. # Mikko Piippo <mikko.piippo(a)opensuse.fi>, 2008. # Jyri Palokangas <jyri.palokangas(a)opensuse.org>, 2008, 2009. # Jyri Palokangas <jmp(a)opensuse.org>, 2008. # Jyri palokangas <jyri.palokangas(a)opensuse.org>, 2008. +# Asko Isonokari <askoin(a)netsonic.fi>, 2009. msgid "" msgstr "" -"Project-Id-Version: control.fi\n" +"Project-Id-Version: control\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-06-05 10:40+0200\n" -"PO-Revision-Date: 2009-06-05 22:10+0300\n" -"Last-Translator: Jyri Palokangas <jyri.palokangas(a)opensuse.org>\n" -"Language-Team: suomi <fi(a)li.org>\n" +"PO-Revision-Date: 2009-06-19 21:48+0300\n" +"Last-Translator: Asko Isonokari <askoin(a)netsonic.fi>\n" +"Language-Team: <fi(a)li.org>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -534,7 +534,7 @@ "joiden mukana tulee kattava valikoima ohjelmistoja. Näitä ovat sähköpostiohjelmat,\n" " tiedostohallintaohjelmat, pelit ja erilaiset apuohjelmat.\n" "\n" -"Koska työpöydän valinta on makuasia, emme erityisesti suosittele kumpaakaan." +"Koska työpöydän valinta on makuasia, emme erityisesti suosi kumpaakaan." #: control/control.openSUSE.glade:383 msgid "GNOME" @@ -557,20 +557,29 @@ msgstr "Minimaalinen palvelin (tekstitila)" #: control/control.openSUSE.glade:394 +#, fuzzy +#| msgid "" +#| "GNOME 2.24 is the latest desktop from the GNOME Project. \n" +#| "It combines stability and maturity with incremental innovations." msgid "" "GNOME 2.28 is the latest desktop from the GNOME Project. \n" "It combines stability and maturity with incremental innovations." msgstr "" -"GNOME 2.28 on GNOME-projektin uusin työpöytä.\n" -"Siinä vakaus ja kypsyys yhdistyvät vähittäisiin uudistuksiin." +"GNOME 2.24 on GNOME-projektin uusin työpöytä.\n" +"Siinä vakaus ja kypsyys yhdistyvät lisääntyneisiin uudistuksiin." #: control/control.openSUSE.glade:400 +#, fuzzy +#| msgid "" +#| "KDE 4.1 is the latest stable desktop released by the KDE Project.\n" +#| "It delivers an innovative, highly integrated desktop environment\n" +#| "with a modern look and feel." msgid "" "KDE 4.3 is the latest stable desktop released by the KDE Project.\n" "It delivers an innovative, highly integrated desktop environment\n" "with a modern look and feel." msgstr "" -"KDE 4.3 on KDE:n viimeisin vakaa työpöytäjulkaisu.\n" +"KDE 4.1 on KDE:n viimeisin vakaa työpöytäjulkaisu.\n" "Se tuo edistyksellisen, huippuunsa yhtenäistetyn työpöytäympäristön,\n" "jonka ulkonäkö ja tuntuma on nykyaikainen." @@ -585,3 +594,9 @@ #: control/control.openSUSE.glade:658 control/control.openSUSE.glade:798 msgid "Disk" msgstr "Levy" + +#~ msgid "KDE 4.1" +#~ msgstr "KDE 4.1" + +#~ msgid "KDE 3.5" +#~ msgstr "KDE 3.5" diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-fi-2.18.1/po/country.fi.po new/yast2-trans-fi-2.18.1/po/country.fi.po --- old/yast2-trans-fi-2.18.1/po/country.fi.po 2009-06-09 14:24:01.000000000 +0200 +++ new/yast2-trans-fi-2.18.1/po/country.fi.po 2009-06-24 14:56:11.000000000 +0200 @@ -15,12 +15,13 @@ # Mikko Piippo <mikko.piippo(a)opensuse.fi>, 2008. # Jyri Palokangas <jyri.palokangas(a)opensuse.org>, 2008, 2009. # Jyri palokangas <jyri.palokangas(a)opensuse.org>, 2008. +# Asko Isonokari <askoin(a)netsonic.fi>, 2009. msgid "" msgstr "" "Project-Id-Version: country.fi\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-06-05 10:30+0200\n" -"PO-Revision-Date: 2009-06-05 22:11+0300\n" +"PO-Revision-Date: 2009-06-20 16:09+0300\n" "Last-Translator: Jyri Palokangas <jyri.palokangas(a)opensuse.org>\n" "Language-Team: suomi <fi(a)li.org>\n" "MIME-Version: 1.0\n" @@ -662,13 +663,13 @@ "Vain ctype: pääkäyttäjällä on sama LC_CTYPE kuin normaalikäyttäjällä. Muita locale-muuttujia\n" "ei määritellä pääkäyttäjälle. \n" "Kyllä: pääkäyttäjälle on määritelty samat locale-muuttujat kuin normaalikäyttäjälle. \n" -"Ei: pääkäyttäjän mitään locale-muuttujaa ei määritellä.\n" +"Ei: mitään pääkäyttäjän locale-muuttujaa ei määritellä.\n" "\n" #. help text for langauge expert screen #: language/src/select_language.ycp:89 msgid "Use Detailed Locale Setting to set a locale for the primary language that is not offered in the list in the main dialog. Translation may not be available for the selected locale." -msgstr "Valitse Locale-asetuksen tiedot kun haluat asettaa ensisijaiselle kielelle muun kuin päävalintaikkunassa tarjotun vaihtoehdon. Käännöksiä ei ole välttämättä saatavilla valitulle kielelle." +msgstr "Valitse Yksityiskohtaiset Locale-asetuksen tiedot kun haluat asettaa ensisijaiselle kielelle muun kuin päävalintaikkunassa tarjotun vaihtoehdon. Käännöksiä ei ole välttämättä saatavilla valitulle kielelle." #. heading text #: language/src/select_language.ycp:115 @@ -903,8 +904,10 @@ #. help text, cont. #: timezone/src/dialogs.ycp:111 +#, fuzzy +#| msgid "Press Test to test your IR control." msgid "Press Accept to save your changes." -msgstr "Napsauta Hyväksy tallentaaksesi muutokset." +msgstr "Napsauta Kokeile kokeillaksesi kaukosäätöä." #. label text, do not change "DD-MM-YYYY" #: timezone/src/dialogs.ycp:158 @@ -969,12 +972,12 @@ #. frame label #: timezone/src/dialogs.ycp:484 timezone/src/dialogs.ycp:739 msgid "Date and Time (NTP is configured)" -msgstr "Päiväys ja aika (NTP on määritetty)" +msgstr "Päivämäärä ja aika (NTP on määritetty)" #. frame label #: timezone/src/dialogs.ycp:486 timezone/src/dialogs.ycp:741 msgid "Date and Time" -msgstr "Päiväys ja aika" +msgstr "Päivämäärä ja aika" #. label text #: timezone/src/dialogs.ycp:504 timezone/src/dialogs.ycp:519 @@ -1135,3 +1138,18 @@ #: timezone/src/timezone.ycp:175 msgid "New value for hardware clock" msgstr "Uusi arvo laitteiston kellolle" + +#~ msgid "Press Synchronize Now, to get your system time set correctly using the selected NTP server. If you want to make use of NTP permanently, enable the Save NTP Configuration option" +#~ msgstr "Napsauta Tahdista nyt hakeaksesi järjestelmän ajan valitusta NTP-palvelimesta. Jos haluat käyttää NTP:tä jatkuvasti, napsauta Tallenna NTP-määritys." + +#~ msgid "Using the Configure button, open the advanced NTP configuration. Press Accept to save your changes." +#~ msgstr "Määritä-painikkeella avaat NTP-määrityksen lisämääritykset. Napsauta Hyväksy tallentaaksesi muutokset." + +#~ msgid "Synchronization with the NTP server can be done only when the network is configured." +#~ msgstr "Tahdistaminen NTP-palvelimen kanssa onnistuu vain jos verkko on määritetty." + +#~ msgid "Invalid NTP server hostname %1" +#~ msgstr "Virheellinen NTP-palvelimen nimi %1." + +#~ msgid "'ntpdate %1' failed. Revisit NTP server configuration?" +#~ msgstr "'ntpdate %1' epäonnistui. Muokataanko NTP-palvelimen asetuksia?" diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-fi-2.18.1/po/installation.fi.po new/yast2-trans-fi-2.18.1/po/installation.fi.po --- old/yast2-trans-fi-2.18.1/po/installation.fi.po 2009-06-09 14:24:15.000000000 +0200 +++ new/yast2-trans-fi-2.18.1/po/installation.fi.po 2009-06-24 14:56:26.000000000 +0200 @@ -24,7 +24,7 @@ "Project-Id-Version: installation.fi\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-06-05 10:40+0200\n" -"PO-Revision-Date: 2009-06-06 15:00+0300\n" +"PO-Revision-Date: 2009-06-20 16:08+0300\n" "Last-Translator: Jyri Palokangas <jyri.palokangas(a)opensuse.org>\n" "Language-Team: suomi <fi(a)li.org>\n" "MIME-Version: 1.0\n" @@ -229,9 +229,9 @@ #: src/clients/inst_automatic_configuration.ycp:218 #: src/clients/inst_automatic_configuration.ycp:230 -#, fuzzy, ycp-format +#, ycp-format msgid "An error has occured while calling '%1' AC script." -msgstr "Tiedoston tallennuksessa tapahtui virhe." +msgstr "Tapahtui virhe kutsuttaessa automaattisen määrityksen '%1' komentojonoa." #: src/clients/inst_automatic_configuration.ycp:341 msgid "Automatic configuration..." @@ -1758,6 +1758,9 @@ "During an automatic installation, they might be detected later.\n" "(especially on s390 or iSCSI systems)\n" msgstr "" +"Asennusohjelma ei löytänyt kiintolevyjä.\n" +"Automaattisen asennuksen aikana ne saatetaan tunnistaa myöhemmin.\n" +"(erityisesti s390 tai iSCSI järjestelmissä)\n" #. pop-up error report #: src/clients/inst_system_analysis.ycp:127 @@ -2619,6 +2622,8 @@ "Installation was unable to solve package dependecies automatically.\n" "Package manager will be opened for you to solve them manually." msgstr "" +"Asennusohjelma ei onnistunut ratkaisemaan pakettien riippuvuuksia automaattisesti.\n" +"Pakettihallintaohjelma käynnistetään nyt, että voit ratkaista ongelmat käsin." #. notification 1/2 #: src/modules/X11Version.ycp:140 diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-fi-2.18.1/po/multipath.fi.po new/yast2-trans-fi-2.18.1/po/multipath.fi.po --- old/yast2-trans-fi-2.18.1/po/multipath.fi.po 2009-06-05 13:48:04.000000000 +0200 +++ new/yast2-trans-fi-2.18.1/po/multipath.fi.po 2009-06-24 14:56:45.000000000 +0200 @@ -1,18 +1,19 @@ -# translation of multipath.fi.po to suomi +# translation of multipath.po to # Copyright (C) 2005 SUSE Linux Products GmbH. # Finnish message file for YaST2 (@memory@). # Copyright (C) 2003 SuSE Linux AG. # # Jyri Palokangas <jyri.palokangas(a)opensuse.org>, 2005, 2006, 2007, 2008. # Mikko Piippo <mikko.piippo(a)opensuse.fi>, 2008. +# Asko Isonokari <askoin(a)netsonic.fi>, 2009. msgid "" msgstr "" -"Project-Id-Version: multipath.fi\n" +"Project-Id-Version: multipath\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-06-05 10:41+0200\n" -"PO-Revision-Date: 2008-11-24 11:34+0200\n" -"Last-Translator: Jyri Palokangas <jyri.palokangas(a)opensuse.org>\n" -"Language-Team: suomi <fi(a)li.org>\n" +"PO-Revision-Date: 2009-06-10 22:51+0300\n" +"Last-Translator: Asko Isonokari <askoin(a)netsonic.fi>\n" +"Language-Team: <fi(a)li.org>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -152,7 +153,7 @@ #: src/complex.ycp:86 msgid "Blacklist" -msgstr "Musta lista " +msgstr "Estolista " #: src/complex.ycp:90 src/complex.ycp:131 src/complex.ycp:164 msgid "Item" @@ -235,7 +236,7 @@ #: src/complex.ycp:1634 src/complex.ycp:1640 src/complex.ycp:1809 #: src/complex.ycp:2084 src/complex.ycp:2090 src/complex.ycp:2260 msgid "item" -msgstr "sama" +msgstr "kohta" #: src/complex.ycp:2498 msgid "Duplicated configuraton" @@ -308,6 +309,13 @@ "\t\t\t<big>Configure Multipath</big> \n" "\t\t\tClick Configure Tab to make the multipath configurations. \n" msgstr "" +"<big>Multipath Tila</big> \n" +"\t\t\tKäynnistä tai pysäytä multipathd, tarkista multipath -tiedot. \n" +"\n" +"\t\t\t<big>Pysäytä/Käynnistä Multipathd</big> \n" +"\t\t\tNapsauta \"Käytä Multipath:ia\" käynnistääksesi multipathd:n. Napsauta \"Älä käytä Multipath:ia\" pysäyttääksesi multipathd:n. \n" +"\t\t\tMultipath tilan tiedot voidaan yhä näyttää kun multipathd on pysaytetty. \n" +"\n" #. dialog help for Configure tab #: src/helps.ycp:62 @@ -326,6 +334,18 @@ "\t\t\tClick \"Configure devices\" button to configure devices settings. \n" "\t\t\tClick \"Finish\" button to save and update the configurations. \n" msgstr "" +"<big>Määrittely</big> \n" +"\t\t\tKoko /etc/multipath.conf -sisältö voidaan määritellä tässä. Määrittelytiedostossa on neljä osiota:\n" +"\t\t\tmultipaths, oletukset, estolista, estolista_poikkeukset, laitteet. \n" +"\t\t\tMultipaths: multipaths-lista hienosäädöillä \n" +"\t\t\tOletukset: multipath-työkalujen oletusasetukset. \n" +"\t\t\tEstolista:luettelo laitenimistä jotka hylätään multipaht-ehdokkaiksi. \n" +"\t\t\tNapsauta \"Määrittele estolista\" valintaa määritelläksesi estolistan asetukset. \n" +"\t\t\tEstolistan poikkeukset:luettelo laitenimistä jotka jätetään pois estolistalta. \n" +"\t\t\tNapsauta \"Määrittele estolistan poikkeukset\" valintaa määritelläksesi estolistan poikkeukset. \n" +"\t\t\tLaitteet: luettelo asetuksista tallennusoohjauslaitteittain.Ohittaa oletusasetukset, multipath-asetuksin. \n" +"\t\t\tNapsauta \"Määrittele laitteet\" valintaa määritelläksesi estolistan laitteiden asetukset. \n" +"\t\t\tNapsauta \"Valmis\" valintaa määritysten päivittämiseksi ja tallentamikseksi. \n" #. dialog help for defaults section configure tab 1/3 #: src/helps.ycp:78 @@ -335,6 +355,10 @@ "\t\t\tAny default setting here will take effect in all multipath configurations, unless a corresponding local setting overwrites it. \n" "\t\t\tIf a default setting here is cleared, multipath will take its own value as default setting. \n" msgstr "" +"<big>Oletusasetukset</big> \n" +"\t\t\tGlobaalit oletusasetukset voidaan määritellä ja tyhjentää tässä. \n" +"\t\t\tMikä tahansa oletusasetus tässä vaikuttaa kaikkiin multipath-asetuksiin, ellei vastaava paikallinen asetus ei ylikirjoita sitä. \n" +"\t\t\tJos oletusasetus tyhjennetään tässä, multipath ottaa oman asetuksensa oletuskseksi. \n" #. dialog help for blacklist section configure tab 1/3 #: src/helps.ycp:85 @@ -347,6 +371,13 @@ "\t\t\tdevice: Used to identify a specific storage controller in blacklist. A device can be specified by vendor and product name. \n" "" msgstr "" +"<big>Estolistan määritys</big> \n" +"\t\t\tTässä luetellut laitenimet voidaan hylätä multipath-ehdokkaiksi. \n" +"\t\t\tOn kome tapaa tunnistaa laitenimi: wwid, devnode, device. \n" +"\t\t\twwid: Maailmanlaajuinen ID-tunnistus, laite estolistalla. \n" +"\t\t\tdevnode: Säännöllistä ilmaisua voidaan käyttää laitteen tunnistamiseen udev_dir:ssä (oletus hakemistossa /dev). Yleisiä laitenimiä ovet cciss, fd, hd, md, dm, sr, scd, st, ram, raw, loop. \n" +"\t\t\tdevice: Käytettiin tunnistamaan estolistan erityinen tallenninohjain. Laitenimi voidaan yksilöidä valmistajan ja tuotteen nimellä. \n" +"" #. dialog help for blacklist_exception section configure tab 1/3 #: src/helps.ycp:94 @@ -359,6 +390,13 @@ "\t\t\tdevice: Used to identify a specific storage controller excepted from blacklist. A device can be specified by vendor and product name. \n" "" msgstr "" +"<big>Estolistan poikkeusten asetukset</big> \n" +"\t\t\tTässä luetellut laitenimet eivät kuulu estolistaan. \n" +"\t\t\tOn kolme tapaa yksiläidä laitenimi: wwid, devnode, device. \n" +"\t\t\twwid: Maailmanlaajuinen ID-tunnistus, laite poissa estolistalta. \n" +"\t\t\tdevnode: Säännöllistä ilmaisua voidaan käyttää laitteen tunnistamiseen udev_dir:ssä (oletus hakemistossa /dev). Yleisiä laitenimiä ovet cciss, fd, hd, md, dm, sr, scd, st, ram, raw, loop. \n" +"\t\t\tdevice: Käytettiin tunnistamaan poissa estolistalta oleva tietty tallenninohjain. Laitenimi voidaan yksilöidä valmistajan ja tuotteen nimellä. \n" +"" #. dialog help for devcies section configure tab 1/3 #: src/helps.ycp:103 @@ -367,6 +405,9 @@ "\t\t\tPer storage controler settings are listed here, they override the default settings and are overriden by per multipath settings. \n" "\t\t\tEach device is identified by vendor and product name. \n" msgstr "" +"<big>Laitteiden määrittely</big> \n" +"\t\t\tTallentimen ohjainkohtaiset asetukset ovat lueteltuna tässä, ne kirjoittavat.oletusasetukset ja multipath-asetukset ylikirjoittaa ne. \n" +"\t\t\tJoka laite yksilöidään valmistajan ja laitteen nimen mukaan. \n" #. Command line help text for the Xmultipath module #: src/multipath.ycp:53 diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-fi-2.18.1/po/ncurses-pkg.fi.po new/yast2-trans-fi-2.18.1/po/ncurses-pkg.fi.po --- old/yast2-trans-fi-2.18.1/po/ncurses-pkg.fi.po 2009-06-05 13:48:06.000000000 +0200 +++ new/yast2-trans-fi-2.18.1/po/ncurses-pkg.fi.po 2009-06-24 14:56:46.000000000 +0200 @@ -20,7 +20,7 @@ "Project-Id-Version: ncurses-pkg.fi\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-06-05 10:30+0200\n" -"PO-Revision-Date: 2009-04-26 22:36+0300\n" +"PO-Revision-Date: 2009-06-10 17:07+0300\n" "Last-Translator: Jyri Palokangas <jyri.palokangas(a)opensuse.org>\n" "Language-Team: suomi <fi(a)li.org>\n" "MIME-Version: 1.0\n" @@ -356,10 +356,8 @@ #. name of the source package #: src/NCPkgPackageDetails.cc:173 -#, fuzzy -#| msgid "Source Package:" msgid "Source Package: " -msgstr "Lähde paketti:" +msgstr "Lähde paketti: " #: src/NCPkgPackageDetails.cc:207 msgid "This information is available for installed packages only" diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-fi-2.18.1/po/reipl.fi.po new/yast2-trans-fi-2.18.1/po/reipl.fi.po --- old/yast2-trans-fi-2.18.1/po/reipl.fi.po 2009-06-05 13:48:31.000000000 +0200 +++ new/yast2-trans-fi-2.18.1/po/reipl.fi.po 2009-06-24 14:57:08.000000000 +0200 @@ -1,4 +1,5 @@ # translation of reipl.fi.po to suomi +# translation of reipl.po to # Copyright (C) 2005 SUSE Linux Products GmbH. # Finnish message file for YaST2 (@memory@). # Copyright (C) 2003 SuSE Linux AG. @@ -6,12 +7,13 @@ # Jyri Palokangas <jyri.palokangas(a)opensuse.org>, 2005, 2006, 2007, 2008, 2009. # Mikko Piippo <mikko.piippo(a)opensuse.fi>, 2008. # Jyri palokangas <jyri.palokangas(a)opensuse.org>, 2008. +# Asko Isonokari <askoin(a)netsonic.fi>, 2009. msgid "" msgstr "" "Project-Id-Version: reipl.fi\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-06-05 10:44+0200\n" -"PO-Revision-Date: 2009-04-25 10:21+0300\n" +"PO-Revision-Date: 2009-06-20 15:48+0300\n" "Last-Translator: Jyri Palokangas <jyri.palokangas(a)opensuse.org>\n" "Language-Team: suomi <fi(a)li.org>\n" "MIME-Version: 1.0\n" @@ -22,31 +24,31 @@ #: src/Reipl.ycp:751 msgid "Configured reipl methods" -msgstr "Määritetyt reipl-metodit" +msgstr "Määritetyt reipl-menetelmät" #: src/Reipl.ycp:758 msgid "The method ccw is configured and being used." -msgstr "Metodi ccw on määritetty ja käytössä." +msgstr "Menetelmä ccw on määritetty ja käytössä." #: src/Reipl.ycp:760 msgid "The method ccw is configured." -msgstr "Metodi ccw on määritetty." +msgstr "Menetelmä ccw on määritetty." #: src/Reipl.ycp:763 msgid "The method ccw is not supported." -msgstr "Metodi ccw ei ole tuettu." +msgstr "Menetelmä ccw ei ole tuettu." #: src/Reipl.ycp:771 msgid "The method fcp is configured and being used." -msgstr "Metodi fcp on määritetty ja käytössä." +msgstr "Menetelmä fcp on määritetty ja käytössä." #: src/Reipl.ycp:773 msgid "The method fcp is configured." -msgstr "Metodi fcp ei ole määritetty" +msgstr "Menetelmä fcp ei ole määritetty" #: src/Reipl.ycp:776 msgid "The method fcp is not supported." -msgstr "Metodi fcp ei ole tuettu." +msgstr "Menetelmä fcp ei ole tuettu." #. Reipl configure dialog caption #. Initialization dialog caption @@ -56,7 +58,7 @@ #: src/dialogs.ycp:62 msgid "reipl methods" -msgstr "Reipl-metodit" +msgstr "Reipl-menetelmät " #: src/dialogs.ycp:72 msgid "&Ccw" @@ -68,7 +70,7 @@ #: src/dialogs.ycp:92 msgid "ccw parameters" -msgstr "Ccw-parametrit" +msgstr "Ccw-muuttujat" #: src/dialogs.ycp:97 msgid "&Device" @@ -80,7 +82,7 @@ #: src/dialogs.ycp:112 msgid "fcp parameters" -msgstr "FCP-parametrit" +msgstr "FCP-muuttujat" #: src/dialogs.ycp:117 msgid "D&evice" @@ -100,7 +102,7 @@ #: src/dialogs.ycp:141 msgid "Boo&t record logical block address" -msgstr "" +msgstr "Käynnis&tystallenteen looginen lohko-osoite" #: src/dialogs.ycp:158 msgid "reipl configuration" @@ -164,6 +166,11 @@ "that are attached through zFCP (fibre channel protocol). Then fill out the\n" "necessary parameter entry fields for the respective method." msgstr "" +"Koneen uudelleenkäynnistystapa valitaan painikkeilla, jotka luetellaan kohdan\n" +"reipl menettelyt sisällä. Riipuen mitä kone tukee, voit valita joko\n" +" CCW (channel command word)-laitteen tai SCSI-laitteen, joka on liitetty\n" +" käyttäen zFCP-yhteyttä (fibre channel protocol). Täytä tarvittavien muutujien\n" +"kentät k.o. menettelyä varten." #. Configure dialog help 3 #: src/helps.ycp:72 @@ -173,6 +180,9 @@ "such as 0.0.5c51. Depending on the chosen method, this can either refer to a DASD or to\n" "an FCP adapter." msgstr "" +" Laite täytyy olla voimassa oleva laiteväylä-ID pienaakkosin,\n" +"sysfs-yhteensopiva formaatti 0, <alikanavalle asetettu ID>.<laite-ID>,\n" +"kuten 0.0.5c51. Riippuen valitusta menetelmästä, tämä voi viitata DASD- tai FCP-sovitteeseen." #. Configure dialog help 4 #: src/helps.ycp:78 @@ -181,13 +191,16 @@ "configuration from the menu of the zipl bootloader. Use one blank character\n" "to select the default configuration." msgstr "" +"Määre loadparm täytyy olla maksimi 8 merkkiä, ja valitsee käynnistys-\n" +"määrittelyn zipl bootloader-valikosta. Käytä yhtä tyhjää merkkiä valitaksesi \n" +"oletusmäärittelyn." #. Configure dialog help 5 #: src/helps.ycp:83 msgid "" "The world wide port number (WWPN) must be entered with lowercase\n" "letters as a 16-digit hex value, such as 0x5005076300c40e5a." -msgstr "" +msgstr "maailmanlaajuinen porttinumero (WWPN) syötettävä pienaakkosin,/nheksadesimaalein 16 merkkiä, kuten 0x5005076300c40e5a." #. Configure dialog help 6 #: src/helps.ycp:87 @@ -195,6 +208,8 @@ "The logical unit number (LUN) must be entered with lowercase letters\n" "as a 16-digit hex value with all trailing zeros, such as 0x52ca000000000000." msgstr "" +"Looginen yksikkönumero (LUN) syötettävä pienaakkosin\n" +"heksadesimaalein 16 merkkiä, loput nollia, kuten 0x52ca000000000000." #. Configure dialog help 7 #: src/helps.ycp:91 @@ -203,6 +218,9 @@ "a boot configuration from the menu of the zipl bootloader. Use 0 to select\n" "the default configuration." msgstr "" +"Käynnistysohjelmavalitsin täytyy olla ei-negatiivinen kokonaisluku, joka\n" +"valitsee käynnistysmäärittelyn zipl booloader-menusta. Käytä 0 valitaksesi\n" +"oletusmäärittelyn." #. Configure dialog help 8 #: src/helps.ycp:96 @@ -210,6 +228,8 @@ "The boot record logical block address (LBA) specifies the master\n" "boot record and is currently always 0." msgstr "" +"Käynnistyslataimen looginen lohko-osoite (LBA) määrittelee käynnistys-\n" +"lataimen ja on aina hetkellisesti 0." #. Configure dialog help 9 #: src/helps.ycp:100 @@ -217,6 +237,8 @@ "After confirmation of this dialog, you may trigger a reboot, e.g. by shutdown,\n" "and the system will automatically restart from your specified device." msgstr "" +"Tämän valintaikkunan vahvistuksen jälkeen, uudelleenkäynnistystä voi vaihdella,\n" +"esim. sammuta ja järjestelmä käynnistyy automaattisesti valitulta laitteelta käsin." #. Command line help text for the Xreipl module #: src/reipl.ycp:54 @@ -234,8 +256,8 @@ "with an IPL from DASD '%1'.\n" msgstr "" "\n" -"Uudelleenkäynnistyksen jälkeen lataa järjestelmä\n" -"IPL DASD '%1' kanssa.\n" +"Sulkemisen jälkeen lataa järjestelmä uudelleen\n" +"IPL kanssa, DASD-'%1'.\n" #. TRANSLATORS: part of a shutdown message #. %1 is replaced with a FCP name @@ -253,14 +275,13 @@ msgstr "" "\n" "Sammuttamisen jälkeen, uudelleen lataa järjestelmä\n" -"IPL kanssa FCP '%1', \n" -"WWPN '%2'\n" +"IPL kanssa FCP '%1', käyttäen WWPN '%2'\n" "ja LUN '%3'.\n" #. Rich text title for Reipl in proposals #: src/reipl_proposal.ycp:85 msgid "Reipl" -msgstr "ReiplReipl" +msgstr "Reipl" #. Menu title for Reipl in proposals #: src/reipl_proposal.ycp:87 diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-fi-2.18.1/po/s390.fi.po new/yast2-trans-fi-2.18.1/po/s390.fi.po --- old/yast2-trans-fi-2.18.1/po/s390.fi.po 2009-06-05 13:48:36.000000000 +0200 +++ new/yast2-trans-fi-2.18.1/po/s390.fi.po 2009-06-24 14:57:13.000000000 +0200 @@ -1,4 +1,3 @@ -# translation of s390.fi.po to suomi # translation of s390.po to # translation of s390.fi.po to # Copyright (C) 2005 SUSE Linux Products GmbH. @@ -10,15 +9,15 @@ # Jyri Palokangas <jmp(a)netti.fi>, 2006. # Jyri Palokangas <jmp(a)opensuse.fi>, 2007, 2008. # Mikko Piippo <mikko.piippo(a)opensuse.fi>, 2008. -# Jyri Palokangas <jyri.palokangas(a)opensuse.org>, 2009. +# Asko Isonokari <askoin(a)netsonic.fi>, 2009. msgid "" msgstr "" -"Project-Id-Version: s390.fi\n" +"Project-Id-Version: s390\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-06-05 10:31+0200\n" -"PO-Revision-Date: 2009-04-23 13:43+0300\n" -"Last-Translator: Jyri Palokangas <jyri.palokangas(a)opensuse.org>\n" -"Language-Team: suomi <fi(a)li.org>\n" +"PO-Revision-Date: 2009-06-12 22:42+0300\n" +"Last-Translator: Asko Isonokari <askoin(a)netsonic.fi>\n" +"Language-Team: <fi(a)li.org>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -545,13 +544,14 @@ #: src/modules/DASDController.ycp:395 #, ycp-format msgid "%1: device is not a DASD" -msgstr "%1: laite ei ole DASD" +msgstr "%1: laite ei ole DADS" #. error report, %1 is device identification #: src/modules/DASDController.ycp:400 -#, ycp-format +#, fuzzy, ycp-format +#| msgid "Error: Could not allocate memory\n" msgid "%1: Could not load module" -msgstr "%1: Moduulin lataaminen ei onnistunut" +msgstr "%1: EI voitu ladata modulia" #. error report, %1 is device identification, %2 is integer code #: src/modules/DASDController.ycp:404 diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-fi-2.18.1/po/squid.fi.po new/yast2-trans-fi-2.18.1/po/squid.fi.po --- old/yast2-trans-fi-2.18.1/po/squid.fi.po 2009-06-05 13:48:48.000000000 +0200 +++ new/yast2-trans-fi-2.18.1/po/squid.fi.po 2009-06-24 14:57:24.000000000 +0200 @@ -1,4 +1,3 @@ -# translation of squid.fi.po to suomi # translation of squid.fi.po to # translation of squid.po to # Copyright (C) 2005 SUSE Linux Products GmbH. @@ -8,15 +7,16 @@ # Jyri Palokangas <jmp(a)netti.fi>, 2005, 2006. # Jyri Palokangas <jmp(a)opensuse.fi>, 2008. # Mikko Piippo <mikko.piippo(a)opensuse.fi>, 2008. -# Jyri Palokangas <jyri.palokangas(a)opensuse.org>, 2008, 2009. +# Jyri Palokangas <jyri.palokangas(a)opensuse.org>, 2008. +# Asko Isonokari <askoin(a)netsonic.fi>, 2009. msgid "" msgstr "" -"Project-Id-Version: squid.fi\n" +"Project-Id-Version: squid\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-06-05 10:45+0200\n" -"PO-Revision-Date: 2009-04-24 22:24+0300\n" -"Last-Translator: Jyri Palokangas <jyri.palokangas(a)opensuse.org>\n" -"Language-Team: suomi <fi(a)li.org>\n" +"PO-Revision-Date: 2009-06-17 22:59+0300\n" +"Last-Translator: Asko Isonokari <askoin(a)netsonic.fi>\n" +"Language-Team: <fi(a)li.org>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -61,7 +61,7 @@ #: src/Squid.ycp:1040 msgid "Reading Refresh Patterns ..." -msgstr "Luetaan päivitystapoja..." +msgstr "Luetaan päivitysmäärityksiä..." #: src/Squid.ycp:1041 msgid "Reading ACL Groups ..." @@ -69,7 +69,7 @@ #: src/Squid.ycp:1042 msgid "Reading Access Control table ..." -msgstr "Luetaan pääsynvalvontalistaa..." +msgstr "Luetaan pääsynvalvontataulua ACL..." #: src/Squid.ycp:1043 msgid "Reading Other Settings ..." @@ -98,7 +98,7 @@ #. We do not set help text here, because it was set outside #: src/Squid.ycp:1390 msgid "Saving Squid Configuration" -msgstr "Tallennetaan määritykset" +msgstr "Tallennetaan Squid-määritykset" #. Progress stage 1/2 #: src/Squid.ycp:1395 @@ -208,7 +208,7 @@ #: src/SquidACL.ycp:105 msgid "myip" -msgstr "omaip" +msgstr "oma-ip" #: src/SquidACL.ycp:107 msgid "Local IP Address" @@ -240,7 +240,7 @@ #: src/SquidACL.ycp:136 msgid "This refers to destination domain i.e. the source domain where the origin server is located." -msgstr "Tämä viittaa kohde toimialueeseen, esim. lähdetoimialue, jossa palvelin sijaitsee." +msgstr "Tämä viittaa kohde toimialueeseen, ts. lähdetoimialue, jossa palvelin sijaitsee." #: src/SquidACL.ycp:138 msgid "Matches against the client domain name." @@ -248,7 +248,7 @@ #: src/SquidACL.ycp:139 msgid "Provides match against destination domain." -msgstr "Tuottaa kohde toimialueen vastineen." +msgstr "Tuottaa kohde-toimialueen vastineen." #: src/SquidACL.ycp:142 msgid "time" @@ -300,7 +300,7 @@ #: src/SquidACL.ycp:165 msgid "Matches on the URL path minus any protocol, port, and host name information" -msgstr "Täsmää koko URL-polkuun lukuunottamatta yhteyskäytäntö-, portti- ja isäntänimi -tietoja" +msgstr "Täsmää koko URL-polkuun lukuunottamatta yhteyskäytäntö-, portti- ja isäntänimi-tietoja" #: src/SquidACL.ycp:168 msgid "port" @@ -308,7 +308,7 @@ #: src/SquidACL.ycp:169 msgid "Port Number or Range of Ports" -msgstr "Porttinumero tai alue" +msgstr "Porttinumero tai niiden alue" #: src/SquidACL.ycp:174 msgid "Matches on the destination port for the request." @@ -328,7 +328,7 @@ #: src/SquidACL.ycp:186 msgid "proto" -msgstr "proto" +msgstr "yhteyskäytäntö" #: src/SquidACL.ycp:187 msgid "Protocol" @@ -344,11 +344,11 @@ #: src/SquidACL.ycp:196 msgid "HTTP Method" -msgstr "HTTP" +msgstr "tapa HTTP" #: src/SquidACL.ycp:208 msgid "This type matches the HTTP method in the request headers." -msgstr "Täsmää HTTP-pyynnön otsikkotietoihin." +msgstr "Tämä täsmää HTTP-tapaan pyynnön otsikkotietoissa." #: src/SquidACL.ycp:210 msgid "A regular expression that matches the clients browser type based on the user agent header." @@ -388,7 +388,7 @@ "Regular expression matching against the mime type of the reply received by\n" "squid. Can be used to detect file download or some types HTTP tunnelling requests." msgstr "" -"Säännöllinen lauseke, joka täsmää vastaanotetun sanoman mime-tyyppiin.\n" +"Säännöllinen lauseke, joka täsmää squidin vastaanottaman sanoman mime-tyyppiin.\n" "Voidaan käyttää tiedostonlatauksen tai eräiden HTTP-tunnelointipyyntöjen tunnistamiseen." #: src/SquidACL.ycp:250 @@ -397,7 +397,7 @@ #: src/SquidACL.ycp:251 msgid "Match against the mime type of the reply received by Squid." -msgstr "Täsmää vastaanotetun sanoman mime-tyyppiin." +msgstr "Täsmää Squidin vastaanottaman sanoman mime-tyyppiin." #: src/SquidACL.ycp:255 msgid "MAC Address" @@ -518,7 +518,7 @@ #. language name - combo box entry; don't translate the encoding suffix #: src/SquidErrorMessages.ycp:113 msgid "Ukrainian-1251" -msgstr "ukraina-1251" +msgstr "ukraina" #. language name - combo box entry #: src/SquidErrorMessages.ycp:115 @@ -796,11 +796,11 @@ #: src/dialogs.ycp:113 msgid "&Cache Replacement Policy" -msgstr "&Välimuistin korvauspolitiikka" +msgstr "&Välimuistin korvauskäytäntö" #: src/dialogs.ycp:119 msgid "&Memory Replacement Policy" -msgstr "&Muistin korvauspolitiikka" +msgstr "&Muistin korvauskäytäntö" #: src/dialogs.ycp:186 msgid "&Directory Name" @@ -852,7 +852,7 @@ #: src/dialogs.ycp:253 msgid "Cache &Store Log" -msgstr "Välimuistivarastoloki" +msgstr "Välimuisti&varastoloki" #: src/dialogs.ycp:256 msgid "&Emulate Httpd Log?" @@ -884,11 +884,11 @@ #: src/handlers.ycp:209 msgid "Access Log" -msgstr "Pääsyloki" +msgstr "&Pääsyloki" #: src/handlers.ycp:213 msgid "Cache Log" -msgstr "Välimuistiloki" +msgstr "&Välimuistiloki" #: src/handlers.ycp:217 msgid "Cache Store Log" @@ -900,7 +900,7 @@ #: src/helper_functions.ycp:60 msgid "seconds" -msgstr "sekuntia" +msgstr "Sekuntia" #: src/helper_functions.ycp:61 msgid "minutes" @@ -908,11 +908,11 @@ #: src/helper_functions.ycp:62 msgid "hours" -msgstr "tuntiauntia" +msgstr "Tuntia" #: src/helper_functions.ycp:63 msgid "days" -msgstr "päivää" +msgstr " päivää" #. Read dialog help 1/2 #: src/helps.ycp:38 @@ -1020,7 +1020,7 @@ "modification) an object without explicit expire time will be\n" "considered fresh." msgstr "" -"Prosentti on määrä objektin iästä (aika viimeisestä\n" +"Prosentti on vastaava määrä objektin iästä (aika viimeisestä\n" "muutoksesta). Objekti, jolla ei ole vanhenemisaikaa, tulkitaan \n" "tuoreeksi." @@ -1095,11 +1095,11 @@ "</table>\n" "" msgstr "" -"Välimuistin korvauspolitiikka määrittää, mitkä objektit korvataan\n" +"Välimuistin korvauskäytäntö määrittää, mitkä objektit korvataan\n" "kun levytilaa tarvitaan.\n" -"Muistin korvauspolitiikka määrittää objektien korvauspolitiikan\n" +"Muistin korvauskäytäntö määrittää objektien korvauskäytännön\n" "muistissa, kun tilaa uusille objekteille ei ole saatavilla.\n" -"Politiikkoja voivat olla:\n" +"Käytäntöjä voivat olla:\n" "<table>\n" " <tr>\n" " <td>lru</td>\n" @@ -1107,15 +1107,15 @@ " </tr>\n" " <tr>\n" " <td>heap GDSF</td>\n" -" <td>Greedy-Dual Size Frequency</td>\n" +" <td>välimuistioptimointi Greedy-Dual Size Frequency</td>\n" " </tr>\n" " <tr>\n" " <td>heap LFUDA</td>\n" -" <td>Last Frequently Used with Dynamic Aging</td>\n" +" <td>viimeksi useiten käytetty, dynaminen ikääntyminen</td>\n" " <tr>\n" " <tr>\n" " <td>heap LRU</td>\n" -" <td>lru policy implemented using a heap</td>\n" +" <td>lru-käytäntö toteutettuna käyttäen heap GDSF</td>\n" " </tr>\n" "</table>\n" "" @@ -1133,7 +1133,7 @@ "Level 1 Directories defines number of first-level subdirectories which\n" "will be created under the Directory Name directory." msgstr "" -"Tason 1 hakemistot määrittää montako ensimmäisen tason hakemistoa\n" +"Tason 1 hakemistot määrittää montako ensimmäisen tason alihakemistoa\n" "luodaan hakemistoon Hakemiston nimi." #: src/helps.ycp:137 @@ -1141,7 +1141,7 @@ "Level 2 Directories defines number of second-level subdirectories which will be created\n" "under each first-level directory." msgstr "" -"Tason 2 hakemistot määrittää montako toisen tason hakemistoa luodaan\n" +"Tason 2 hakemistot määrittää montako toisen tason alihakemistoa luodaan\n" "jokaiseen ensimmäisen tason hakemistoon." #: src/helps.ycp:143 @@ -1164,7 +1164,7 @@ msgstr "" "Pääsynvalvonta-taulussa voidaan kieltää tai sallia ACL-ryhmiä.\n" "Jos yhdellä rivillä on useita ACL-ryhmiä, sallitaan tai kielletään pääsy \n" -"niiltä, jotka kuuluvat useaan ryhmään samanaikaisesti." +"niiltä, jotka kuuluvat kaikkiin ryhmiin samanaikaisesti." #: src/helps.ycp:150 msgid "" @@ -1192,7 +1192,7 @@ "objects that are stored in the object store, as well as the time when the object\n" "gets deleted. This option can be left empty." msgstr "" -"Valimuistivarastoloki määrittää lokitiedoston, johon kirjataan kaikki \n" +"Valimuistivarastoloki määrittää sijainnin lokitiedostolle, johon kirjataan kaikki \n" "objektivarastoon varastoitavat objektit sekä objektien poistamisajat.\n" "Tämä asetus voidaan jättää tyhjäksi." @@ -1267,11 +1267,11 @@ #: src/popup_dialogs.ycp:204 msgid "Allow" -msgstr "Salli" +msgstr "S&alli" #: src/popup_dialogs.ycp:204 msgid "Deny" -msgstr "Estä" +msgstr "&Estä" #: src/popup_dialogs.ycp:209 msgid "ACL" @@ -1362,7 +1362,7 @@ "delete all of its occurences in Access Control table." msgstr "" "Jos tämän ACL-ryhmän nimeä halutaan muuttaa, pitää\n" -"kaikki sen esiintymät poistaa pääsynvaltontataulusta." +"kaikki sen esiintymät poistaa pääsynvalvontataulusta." #: src/store_del.ycp:350 msgid "If you change name of this ACL Group these options might be affected: \n" @@ -1386,7 +1386,7 @@ "You must not delete this ACL Group, because \n" "it's used in Access Control table.\n" msgstr "" -"Tätä ACL-ryhmää ei voi poistaa, koska \n" +"Tätä ACL-ryhmää ei tule poistaa, koska \n" "se on käytössä pääsynvalvontataulussa.\n" #: src/store_del.ycp:396 diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-fi-2.18.1/po/status.txt new/yast2-trans-fi-2.18.1/po/status.txt --- old/yast2-trans-fi-2.18.1/po/status.txt 2009-06-09 14:25:33.000000000 +0200 +++ new/yast2-trans-fi-2.18.1/po/status.txt 2009-06-24 14:57:43.000000000 +0200 @@ -1,6 +1,6 @@ -Translated : 19715 -Fuzzy : 129 -Untranslated : 154 +Translated : 19730 +Fuzzy : 131 +Untranslated : 137 -------------------- All strings : 19998 99 % are translated ++++++ yast2-trans-fr-2.18.1.tar.bz2 ++++++ ++++ 6523 lines of diff (skipped) ++++++ yast2-trans-gl-2.18.1.tar.bz2 ++++++ ++++ 2228 lines of diff (skipped) ++++++ yast2-trans-ko-2.18.1.tar.bz2 ++++++ ++++ 38725 lines of diff (skipped) ++++++ yast2-trans-nl-2.18.1.tar.bz2 ++++++ ++++ 3116 lines of diff (skipped) ++++++ yast2-trans-pl-2.18.1.tar.bz2 ++++++ ++++ 3227 lines of diff (skipped) ++++++ yast2-trans-pt_BR-2.18.1.tar.bz2 ++++++ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-pt_BR-2.18.1/po/bootloader.pt_BR.po new/yast2-trans-pt_BR-2.18.1/po/bootloader.pt_BR.po --- old/yast2-trans-pt_BR-2.18.1/po/bootloader.pt_BR.po 2009-06-05 15:46:10.000000000 +0200 +++ new/yast2-trans-pt_BR-2.18.1/po/bootloader.pt_BR.po 2009-06-24 15:06:22.000000000 +0200 @@ -13,9 +13,9 @@ "Project-Id-Version: bootloader\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-06-05 10:33+0200\n" -"PO-Revision-Date: 2009-05-22 14:33+0000\n" +"PO-Revision-Date: 2009-06-08 22:50-0300\n" "Last-Translator: Luiz Fernando Ranghetti <elchevive(a)opensuse.org>\n" -"Language-Team: Brazilian Portuguese <opensuse-pt(a)opensuse.org>\n" +"Language-Team: Brazilian Portuguese <kde-i18n-pt_BR(a)kde.org>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -380,6 +380,9 @@ "Specify the filename for a specific FPSWA to load.\n" "If this option is used then no other file will be tried." msgstr "" +"Especificar o nome de arquivo para o FPSWA especificado a carregar\n" +"Especifique o nome de arquivo para o FPSWA especificado a carregar.\n" +"Se esta opção for utilizada, nenhum outro arquivo será tentado." #: src/elilo/helps.ycp:82 msgid "" @@ -387,16 +390,21 @@ "A message that is printed on the main screen if supported by\n" "the chooser." msgstr "" +"Mensagem exibida na tela principal (se suportado)\n" +"A mensagem a ser exibida na tela principal se suportado\n" +"pelo seletor." #: src/elilo/helps.ycp:87 -#, fuzzy -#| msgid "Delay to wait before auto booting in seconds (used if not in interactive mode)" msgid "" "Delay to Wait before Auto Booting in Seconds\n" "The number of 10th of seconds to wait before\n" "auto booting when not in interactive mode.\n" "Default is 0" -msgstr "Tempo, em segundos, que deve decorrer antes da inicialização automática (usado se não estiver no modo interativo)" +msgstr "" +"Tempo a esperar antes da inicialização automática em segundos\n" +"O número em décimos de segundo a esperar antes da\n" +"inicialização automática quando não estiver no modo interativo.\n" +"O padrão é 0" #: src/elilo/helps.ycp:96 src/zipl/helps.ycp:27 msgid "Boot Image Location" @@ -463,10 +471,8 @@ msgstr "Partição de inicialização personalizada" #: src/elilo/options.ycp:33 src/ppc/options.ycp:256 -#, fuzzy -#| msgid "Global append string of options to kernel command line" msgid "Global Append &String of Options to Kernel Command Line" -msgstr "Anexar string de opções globais à linha de comando do kernel" +msgstr "Anexar &string de opções globais à linha de comando do kernel" #: src/elilo/options.ycp:35 msgid "&Name of Default Image File" @@ -497,10 +503,8 @@ msgstr "&Definir a interface do usuário para o ELILO (\"simple\" ou \"textmenu\")" #: src/elilo/options.ycp:48 -#, fuzzy -#| msgid "Delay to wait before auto booting in seconds (used if not in interactive mode)" msgid "&Delay to Wait before Auto Booting in Seconds (Used if not in Interactive Mode)" -msgstr "Tempo, em segundos, que deve decorrer antes da inicialização automática (usado se não estiver no modo interativo)" +msgstr "&Tempo a esperar antes da inicialização automática em segundos (usado se não estiver no modo interativo)" #: src/elilo/options.ycp:49 msgid "Display the Content of a File by Function &Keys" @@ -591,18 +595,12 @@ "pode ser alterada com o uso dos botões Para cima e Para baixo.\n" #: src/grub/helps.ycp:43 -#, fuzzy -#| msgid "" -#| "<big>Write generic Boot Code to MBR</big> \n" -#| "To replace the master boot record of your disk with generic code (OS independent code which\n" -#| "boots the active partition), select Write generic Boot Code to MBR." msgid "" "Write generic Boot Code to MBR replace the master boot record of your disk with generic code (OS independent code which\n" "boots the active partition)." msgstr "" -"<big>Gravar código de inicialização genérico na MBR</big> \n" -"Para substituir a MBR (Master Boot Record) do seu disco por um código genérico (código independente do SO que\n" -"inicializa a partição ativa), selecione Gravar código de inicialização genérico na MBR." +"Gravar código de inicialização genérico na MBR substitui a MBR (Master Boot Record) do seu disco por um código genérico\n" +"(código independente do SO que inicializa a partição ativa)." #: src/grub/helps.ycp:46 msgid "" @@ -645,16 +643,12 @@ msgstr "Partição de inicialização personalizada permite que você escolha uma partição da qual será feita a inicialização" #: src/grub/helps.ycp:66 -#, fuzzy -#| msgid "" -#| "Serial Connection Parameters lets you define the paramters to use\n" -#| "for a serial console. Please see the grub documentation (<code>info grub</code>) for details." msgid "" "Use Serial Console lets you define the paramters to use\n" "for a serial console. Please see the grub documentation (<code>info grub</code>) for details." msgstr "" -"Parâmetros de conexão serial permite que você defina os parâmetros a serem usados\n" -"para um console serial. Consulte a documentação do grub (<code>info grub</code>) para obter detalhes." +"Usar console serial permite que você defina os parâmetros a serem usados\n" +"para um console serial. Consulte a documentação do grub (<code>info grub</code>) para detalhes." #: src/grub/helps.ycp:69 msgid "" @@ -686,27 +680,17 @@ msgstr "Arquivo de menu gráfico define o arquivo a ser usado para o menu de inicialização gráfico." #: src/grub/helps.ycp:82 -#, fuzzy -#| msgid "" -#| "Password for the Menu Interface \n" -#| "Define the password that will be required to access the boot menu. YaST will only accept the password if you repeat\n" -#| "it in Retype Password." msgid "" "Protect Boot Loader with Password \n" "Define the password that will be required to access the boot menu. YaST will only accept the password if you repeat\n" "it in Retype Password." msgstr "" -"Senha da interface de menu \n" -"Define a senha obrigatória para acessar o menu de inicialização. O YaST somente aceitará a senha se você a repetir\n" -" em Redigitar senha." +"Proteger o carregador de inicialização com senha \n" +"Defina a senha que será obrigatória para acessar o menu de inicialização. O YaST somente aceitará a senha se você a repetir\n" +"em Redigitar senha." #. help text 1/5 #: src/grub/helps.ycp:88 -#, fuzzy -#| msgid "" -#| "<big>Disks Order</big> \n" -#| "To specify the order of the disks according to the order in BIOS, use\n" -#| "the Up and Down buttons to reorder the disks." msgid "" "<big>Disks Order</big> \n" "To specify the order of the disks according to the order in BIOS, use\n" @@ -716,7 +700,9 @@ msgstr "" "<big>Ordem dos discos</big> \n" "Para especificar a ordem dos discos de acordo com a ordem na BIOS, use\n" -"os botões Para cima e Para baixo para reorganizar os discos." +"os botões Para cima e Para baixo para reorganizar os discos.\n" +"Para adicionar um disco, clique em Adicionar.\n" +"Para remover um disco, clique em Remover." #: src/grub/helps.ycp:100 msgid "Boot Loader Locations" @@ -814,10 +800,8 @@ msgstr "&Dispositivo" #: src/grub/options.ycp:399 -#, fuzzy -#| msgid "A class must contain at least one printer." msgid "Device map must contain at least one device" -msgstr "Uma classe deve conter pelo menos uma impressora." +msgstr "O mapa de dispositivos deve conter pelo menos um dispositivo" #. selectionn box label #: src/grub/options.ycp:407 src/grub/widgets.ycp:485 src/grub/widgets.ycp:493 @@ -1074,13 +1058,11 @@ #: src/modules/BootSupportCheck.ycp:208 msgid "The boot device is on software RAID1. Select other bootloader location, e.g. Master Boot Record" -msgstr "" +msgstr "O dispositivo de inicialização é um software RAID1. Selecione outra localização do carregador de inicialização, por exemplo, a MBR" #: src/modules/BootSupportCheck.ycp:228 -#, fuzzy -#| msgid "The /boot directory is on an XFS filesystem. System may not boot." msgid "The /boot directory is on an ext4 filesystem. Create separate /boot partition with ext2 filesytem" -msgstr "O diretório /boot está em um sistema de arquivos XFS. O sistema talvez não irá inicializar." +msgstr "O diretório /boot está em um sistema de arquivos ext4. Crie uma partição /boot com o sistema de arquivos ext2" #: src/modules/BootSupportCheck.ycp:235 msgid "The /boot directory is on an XFS filesystem. System may not boot." @@ -1320,6 +1302,11 @@ "copy the files to that partition. On CHRP you need a 41 PReP\n" "boot partition, /boot/second from the quik package is stored there " msgstr "" +"Localização da inicialização\n" +"Este é o número da partição de sua partição de inicialização. Em um\n" +"PowerMac ele deve ser no formato HFS porque usamos o hfsutils para\n" +"copiar os arquivos para aquela partição. No CHRP você precisa de uma\n" +"partição de inicialização 41 PReP, o /boot/second do pacote quik é armazenado ali" #: src/ppc/helps.ycp:29 msgid "" @@ -1327,13 +1314,11 @@ "Only for Pmac. Folder that contains your boot stuff, this\n" "folder will be blessed to mark it bootable." msgstr "" +"Caminho da pasta de inicialização\n" +"Somente para Pmac. A pasta que contém sua inicialização, esta\n" +"pasta será abençoada e marcada como inicializável." #: src/ppc/helps.ycp:33 -#, fuzzy -#| msgid "" -#| "Append string for.global options to pass to kernel command line \n" -#| "Lets you define additional global parameters to pass to the kernel. These are\n" -#| "used if no 'append' appears in a given section.\n" msgid "" "Append String for Global Options to Pass to Kernel Command Line \n" "Lets you define additional global parameters to pass to the kernel. These are\n" @@ -1344,11 +1329,6 @@ "usados se nenhum 'append' aparecer em uma seção específica.\n" #: src/ppc/helps.ycp:38 -#, fuzzy -#| msgid "" -#| "Name of the default initrd file, if not empty, defines the initial\n" -#| "ramdisk to use. Either enter the path and file name directly or choose by using\n" -#| "Browse\n" msgid "" "Name of the Default Initrd File, if not empty, defines the initial\n" "ramdisk to use. Either enter the path and file name directly or choose by using\n" @@ -1359,25 +1339,22 @@ " Procurar para escolhê-los\n" #: src/ppc/helps.ycp:43 -#, fuzzy -#| msgid "" -#| "Name of default initrd file, if non-empty, defines the initial\n" -#| "ramdisk to use. Either enter the path and file name directly or choose by using\n" -#| "Browse" msgid "" "Name of Default Image File, if not empty, defines the image\n" "file to use. Either enter the path and file name directly or choose by using\n" "Browse" msgstr "" -"Nome do arquivo initrd padrão, se não estiver vazio, definirá o \n" -"disco inicial de ram a ser usado. Digite o caminho e o nome de arquivo diretamente ou use\n" -" Procurar para escolhê-los" +"Nome do arquivo de imagem padrão, se não estiver vazio, definirá o \n" +"arquivo de imagem a ser usado. Digite o caminho e o nome de arquivo diretamente\n" +"ou use Procurar para escolhê-los" #: src/ppc/helps.ycp:47 msgid "" "Set Default Root Filesystem\n" "Set global root filesystem for Linux" msgstr "" +"Definir o sistema de arquivos raiz\n" +"Define o sistema de arquivos raiz global para o Linux" #: src/ppc/helps.ycp:51 msgid "" @@ -1386,6 +1363,10 @@ "If this option is given, the boot partition will be converted to FAT. \n" "The intend of this option is to write the boot files to all members of a RAID1 or RAID5 system." msgstr "" +"Partição para a duplicação do carregador de inicialização\n" +"Especifica outros nós de dispositivos Linux onde a informação de inicialização deve ser armazenada.\n" +"Se esta opção for fornecida, a partição de inicialização será convertida para FAT. \n" +"A intenção desta opção é gravar os arquivos de inicialização para todos os membros do sistema RAID1 ou RAID5." #: src/ppc/helps.ycp:57 msgid "" @@ -1394,6 +1375,10 @@ "variable with the full OpenFirmware path pointing to the device specified in\n" "\"boot=\". If this option is missing, the system may not boot." msgstr "" +"Alterar o dispositivo de inicialização na NV-RAM\n" +"Esta opção fará o lilo atualizar a variável \"boot-device\" do OpenFirmware\n" +"com o caminho completo do OpenFirmware apontando para o dispositivo especificado\n" +"em \"boot=\". Se esta opção estiver faltando, o sistema pode não inicializar." #: src/ppc/helps.ycp:63 msgid "" @@ -1402,6 +1387,10 @@ "The OpenFirmware driver in the nVidia graphics card as shipped with Apple G5 systems \n" "will crash if there is no monitor attached." msgstr "" +"Não usar o seletor de sistema operacional\n" +"Fará o lilo usar o yaboot como arquivo de inicialização ao invés do script Forth chamado \"os-chooser\". \n" +"O driver OpenFirmware das placas de vídeo nVidia dos sistemas Apple G5 irá falhar se não houver\n" +"um monitor conectado." #: src/ppc/helps.ycp:69 msgid "" @@ -1409,6 +1398,9 @@ "It contains the timeout between MacOS/Linux in seconds until Linux boots automatically \n" "if no key is pressed to boot MacOS" msgstr "" +"Tempo de espera em segundos para MacOS/Linux\n" +"Ele contém o tempo de espera entre o MacOS/Linux em segundos antes que o Linux inicie\n" +"automaticamente se nenhuma tecla for pressionada para inicializar o MacOS" #: src/ppc/helps.ycp:74 msgid "" @@ -1418,6 +1410,11 @@ "complex setups. This option forces the lilo script to use\n" "the FAT formatted file system" msgstr "" +"Sempre inicializar da partição FAT\n" +"Normalmente o script do lilo irá selecionar automaticamente o formato da partição\n" +"de inicialização ser ou uma partição de inicialização PReP ou um sistema de arquivos\n" +"formatado em FAT para configurações mais complexas. Esta opção força o script do lilo\n" +"a usar o sistema de arquivos formatado em FAT" #: src/ppc/helps.ycp:81 msgid "" @@ -1425,6 +1422,9 @@ "Install the bootloader even if it is unsure whether your firmware is\n" "buggy so that next boot will fail. This results in an unsupported setup." msgstr "" +"Instalar carregador de inicialização mesmo com erros\n" +"Instala o carregador de inicialização mesmo se não tiver certeza se seu firmware está\n" +"com erros e a próxima inicialização irá falhar. Isto irá resultar numa configuração não suportada." #: src/ppc/helps.ycp:90 msgid "PPC Boot Loader Location" @@ -1495,28 +1495,20 @@ msgstr "Partição de inicialização HFS" #: src/ppc/options.ycp:47 -#, fuzzy -#| msgid "Partition for Boot Loader Duplication" msgid "Partition for Boot Loader &Duplication" -msgstr "Partição para a duplicação do carregador de inicialização" +msgstr "Partição para a &duplicação do carregador de inicialização" #: src/ppc/options.ycp:79 -#, fuzzy -#| msgid "HFS Boot Partition" msgid "HFS Boot &Partition" -msgstr "Partição de inicialização HFS" +msgstr "&Partição de inicialização HFS" #: src/ppc/options.ycp:114 -#, fuzzy -#| msgid "PReP or FAT Partition" msgid "&PReP or FAT Partition" -msgstr "Partição FAT ou PReP" +msgstr "&Partição FAT ou PReP" #: src/ppc/options.ycp:148 -#, fuzzy -#| msgid "PReP partition" msgid "&PReP partitions" -msgstr "Partição PReP" +msgstr "&Partições PReP" #. file open popup caption #: src/ppc/options.ycp:193 src/routines/common_options.ycp:89 @@ -1525,63 +1517,45 @@ msgstr "Selecionar Arquivo" #: src/ppc/options.ycp:230 -#, fuzzy -#| msgid "PReP Partition" msgid "&PReP Partition" -msgstr "Partição PReP" +msgstr "&Partição PReP" #: src/ppc/options.ycp:233 -#, fuzzy -#| msgid "Create Boot Image in File" msgid "Create Boot &Image in File" -msgstr "Criar imagem de inicialização no arquivo" +msgstr "Criar &imagem de inicialização no arquivo" #: src/ppc/options.ycp:239 -#, fuzzy -#| msgid "Write to Boot Slot" msgid "&Write to Boot Slot" -msgstr "Gravar no slot de inicialização" +msgstr "&Gravar no slot de inicialização" #: src/ppc/options.ycp:262 -#, fuzzy -#| msgid "Change Boot Device in NV-RAM" msgid "Change Boot Device in &NV-RAM" -msgstr "Alterar o dispositivo de inicialização na NV-RAM" +msgstr "Alterar o dispositivo de inicialização na &NV-RAM" #. CHRP #: src/ppc/options.ycp:264 -#, fuzzy -#| msgid "Always Boot from FAT Partition" msgid "&Always Boot from FAT Partition" -msgstr "Sempre inicializar da partição FAT" +msgstr "&Sempre inicializar da partição FAT" #: src/ppc/options.ycp:266 -#, fuzzy -#| msgid "Install Boot Loader Even on Errors" msgid "&Install Boot Loader Even on Errors" -msgstr "Instalar carregador de inicialização mesmo com erros" +msgstr "&Instalar o carregador de inicialização mesmo com erros" #. end CHRP #. PREP also for PMAC #: src/ppc/options.ycp:272 -#, fuzzy -#| msgid "Boot Folder Path" msgid "Boot &Folder Path" -msgstr "Caminho da pasta de inicialização" +msgstr "&Caminho da pasta de inicialização" #. end PREP #. PMAC #: src/ppc/options.ycp:278 -#, fuzzy -#| msgid "Do not use OS-chooser" msgid "&Do not Use OS-chooser" -msgstr "Não usar o seletor de sistema operacional" +msgstr "&Não usar o seletor de sistema operacional" #: src/ppc/options.ycp:279 -#, fuzzy -#| msgid "Timeout in Seconds" msgid "&Timeout in Seconds for MacOS/Linux" -msgstr "Tempo de espera em segundos" +msgstr "&Tempo de espera em segundos para MacOS/Linux" #. dialog caption #: src/routines/dialogs.ycp:114 @@ -1636,10 +1610,8 @@ #. heading #. radio button #: src/routines/dialogs.ycp:487 src/routines/section_widgets.ycp:406 -#, fuzzy -#| msgid "Menu Section" msgid "Dump Section" -msgstr "Seção de menu" +msgstr "Seção do dump" #. label #: src/routines/dialogs.ycp:533 src/routines/dialogs.ycp:576 @@ -1678,17 +1650,15 @@ #: src/routines/global_widgets.ycp:125 msgid "Xen" -msgstr "" +msgstr "Xen" #: src/routines/global_widgets.ycp:137 -#, fuzzy -#| msgid "Boot Menu" msgid "Menu" -msgstr "Menu de inicialização" +msgstr "Menu" #: src/routines/global_widgets.ycp:147 msgid "Dump" -msgstr "" +msgstr "Dump" #. table header, Def stands for default #: src/routines/global_widgets.ycp:225 @@ -2059,49 +2029,34 @@ #. help text 1/1 #: src/routines/helps.ycp:166 -#, fuzzy -#| msgid "" -#| "<big>Boot Loader Installation Details</big> \n" -#| "To adjust advanced boot loader installation options (such as the device\n" -#| "mapping), click Boot Loader Installation Details." msgid "" "Boot Loader Installation Details \n" "To adjust advanced boot loader installation options (such as the device\n" "mapping), click Boot Loader Installation Details." msgstr "" -"<big>Detalhes da instalação do carregador de inicialização</big> \n" +"Detalhes da instalação do carregador de inicialização \n" "Para ajustar as opções avançadas de instalação do carregador de inicialização (por exemplo, o mapeamento do\n" "dispositivo), clique em Detalhes da instalação do carregador de inicialização." #. help text 1/1 #: src/routines/helps.ycp:177 -#, fuzzy -#| msgid "" -#| "<big>Boot Loader Type</big> \n" -#| "To select whether to install a boot loader and which bootloader to install,\n" -#| "use Boot Loader." msgid "" "Boot Loader Type \n" "To select whether to install a boot loader and which bootloader to install,\n" "use Boot Loader." msgstr "" -"<big>Tipo de carregador de inicialização</big> \n" -"Para selecionar se você deseja instalar um carregador de inicialização e qual deverá ser instalado,\n" -"use Carregador de inicialização." +"Tipo de carregador de inicialização \n" +"Para selecionar se você deseja instalar um carregador de inicialização\n" +"e qual deverá ser instalado, use Carregador de inicialização." #. help text 1/1 #: src/routines/helps.ycp:189 -#, fuzzy -#| msgid "" -#| "<big>Boot Loader Options</big> \n" -#| "To adjust options of the boot loader, such as the time-out, click\n" -#| "Boot Loader Options." msgid "" "Boot Loader Options \n" "To adjust options of the boot loader, such as the time-out, click\n" "Boot Loader Options." msgstr "" -"<big>Opções do carregador de inicialização</big> \n" +"Opções do carregador de inicialização \n" "Para ajustar as opções do carregador de inicialização, como o tempo de espera, clique em\n" "Opções do carregador de inicialização." @@ -2118,19 +2073,14 @@ #. help text 1/1 #: src/routines/helps.ycp:211 -#, fuzzy -#| msgid "" -#| "<big>Section Name</big> \n" -#| "Use Section Name to specify the boot loader section name. The section\n" -#| "name must be unique." msgid "" "Section Name \n" "Use Section Name to specify the boot loader section name. The section\n" "name must be unique." msgstr "" -"<big>Nome da seção</big> \n" -"Use Nome da seção para especificar o nome da seção do carregador de inicialização. O nome da\n" -"seção deve ser exclusivo." +"Nome da seção \n" +"Use Nome da seção para especificar o nome da seção do carregador de\n" +"inicialização. O nome da seção deve ser exclusivo." #. help text 1/5 #: src/routines/helps.ycp:222 @@ -2522,13 +2472,11 @@ #: src/routines/section_helps.ycp:54 msgid "Hypervisor specifies the Hypervisor to use." -msgstr "Hipervisor especifica o Hipervisor a ser usado." +msgstr "Hipervisor especifica o hipervisor a ser usado." #: src/routines/section_helps.ycp:56 -#, fuzzy -#| msgid "Optional Kernel Command Line Parameter lets you define additional parameters to pass to the kernel." msgid "Additional Xen Hypervisor Parameters lets you define additional parameters to pass to the xen hypervisor." -msgstr "Parâmetro opcional de linha de comando do kernel permite definir parâmetros globais adicionais a serem passados para o kernel." +msgstr "Parâmetros adicionais do hipervisor xen permite definir parâmetros adicionais a serem passados para o hipervisor xen." #: src/routines/section_helps.ycp:58 msgid "Menu Section" @@ -2555,15 +2503,11 @@ "Editar e Remover" #: src/routines/section_helps.ycp:69 -#, fuzzy -#| msgid "" -#| "Allow attempt to relocate\n" -#| "Usually specified in global section" msgid "" "Allow attempt to relocate\n" "Usually specified in global section" msgstr "" -"Permitir tentativa de realocação\n" +"Permitir tentativa de realocação\n" "É geralmente especificado na seção global" #: src/routines/section_helps.ycp:72 @@ -2602,22 +2546,16 @@ msgstr "Imagem de &Kernel" #: src/routines/section_helps.ycp:89 -#, fuzzy -#| msgid "Root Device" msgid "&Root Device" -msgstr "Dispositivo raiz" +msgstr "Dispositivo &raiz" #: src/routines/section_helps.ycp:90 -#, fuzzy -#| msgid "Vga Mode" msgid "&Vga Mode" -msgstr "Modo VGA" +msgstr "Modo &VGA" #: src/routines/section_helps.ycp:91 -#, fuzzy -#| msgid "Optional Kernel Command Line Parameter" msgid "O&ptional Kernel Command Line Parameter" -msgstr "Parâmetro opcional de linha de comando do kernel" +msgstr "Parâmetro &opcional da linha de comando do kernel" #: src/routines/section_helps.ycp:92 msgid "&Initial RAM Disk" @@ -2632,82 +2570,56 @@ msgstr "Usar proteção por senha" #: src/routines/section_helps.ycp:95 -#, fuzzy -#| msgid "Other System" msgid "&Other System" -msgstr "Outro sistema" +msgstr "&Outro sistema" #: src/routines/section_helps.ycp:96 -#, fuzzy -#| msgid "Do not verify Filesystem before Booting" msgid "Do not &verify Filesystem before Booting" -msgstr "Não verificar o sistema de arquivos antes de inicializar" +msgstr "Não &verificar o sistema de arquivos antes de inicializar" #: src/routines/section_helps.ycp:97 -#, fuzzy -#| msgid "Activate this Partition when selected for Boot" msgid "&Activate this Partition when selected for Boot" -msgstr "Ativar esta partição quando selecionada para inicialização" +msgstr "&Ativar esta partição quando selecionada para inicialização" #: src/routines/section_helps.ycp:98 -#, fuzzy -#| msgid "Block Offset for Chainloading" msgid "B&lock Offset for Chainloading" -msgstr "Bloquear deslocamento para o chainloading" +msgstr "B&loquear deslocamento para o chainloading" #: src/routines/section_helps.ycp:99 -#, fuzzy -#| msgid "Map Section to the First Disk in Device Map" msgid "&Map Section to the First Disk in Device Map" -msgstr "Mapear seção para o primeiro disco do mapa de dispositivos" +msgstr "&Mapear seção para o primeiro disco do mapa de dispositivos" #: src/routines/section_helps.ycp:101 -#, fuzzy -#| msgid "Hypervisor" msgid "&Hypervisor" -msgstr "Hipervisor" +msgstr "&Hipervisor" #: src/routines/section_helps.ycp:102 -#, fuzzy -#| msgid "Additional Xen Hypervisor Parameters" msgid "&Additional Xen Hypervisor Parameters" -msgstr "Parâmetros adicionais do Hipervisor Xen" +msgstr "Parâmetros &adicionais do hipervisor xen" #: src/routines/section_helps.ycp:104 -#, fuzzy -#| msgid "Partition of Menu File" msgid "&Partition of Menu File" -msgstr "Partição do arquivo de menu" +msgstr "&Partição do arquivo de menu" #: src/routines/section_helps.ycp:105 -#, fuzzy -#| msgid "Menu Description File" msgid "&Menu Description File" -msgstr "Arquivo de descrição de menu" +msgstr "Arquivo de descrição do &menu" #: src/routines/section_helps.ycp:106 -#, fuzzy -#| msgid "Force root filesystem to be mounted read-only" msgid "&Force root filesystem to be mounted read-only" -msgstr "Forçar o sistema de arquivos raiz a ser montado como apenas leitura" +msgstr "&Forçar o sistema de arquivos raiz a ser montado como apenas leitura" #: src/routines/section_helps.ycp:107 -#, fuzzy -#| msgid "Allow attempt to relocate" msgid "Allow attempt to &relocate" -msgstr "Permitir tentativa de realocação" +msgstr "Permitir tentativa de &realocação" #: src/routines/section_helps.ycp:108 -#, fuzzy -#| msgid "Target Directory for Dump Section" msgid "Tar&get Directory for Section" -msgstr "Diretório de destino para seção de dump" +msgstr "Diretório de &destino para a seção" #: src/routines/section_helps.ycp:109 -#, fuzzy -#| msgid "Optional Parameter File" msgid "Op&tional Parameter File" -msgstr "Arquivo de parâmetros opcionais" +msgstr "Arquivo de parâmetros &opcionais" #: src/routines/section_helps.ycp:110 msgid "Dump Section (obsolete)" @@ -2718,80 +2630,52 @@ msgstr "Dispositivo de &Dump" #: src/routines/section_helps.ycp:112 -#, fuzzy -#| msgid "SCSI Dump Device" msgid "&SCSI Dump Device" -msgstr "Dispositivo SCSI de dump" +msgstr "Dispositivo &SCSI do dump" #: src/routines/section_helps.ycp:114 -#, fuzzy -#| msgid "List of Menu Entries" msgid "&List of Menu Entries" -msgstr "Lista de entradas de menu" +msgstr "&Lista de entradas do menu" #: src/routines/section_helps.ycp:115 -#, fuzzy -#| msgid "Number of Default Entry" msgid "&Number of Default Entry" -msgstr "Número de entrada padrão" +msgstr "&Número de entrada padrão" #: src/routines/section_helps.ycp:116 -#, fuzzy -#| msgid "Timeout in seconds" msgid "&Timeout in seconds" -msgstr "Tempo de espera em segundos" +msgstr "&Tempo de espera em segundos" #: src/routines/section_helps.ycp:117 -#, fuzzy -#| msgid "Show boot menu" msgid "&Show boot menu" -msgstr "Exibir menu de inicialização" +msgstr "&Exibir menu de inicialização" #: src/routines/section_helps.ycp:118 -#, fuzzy -#| msgid "Copy Image to Boot Partition" msgid "C&opy Image to Boot Partition" -msgstr "Copiar imagem na partição de inicialização" +msgstr "C&opiar imagem na partição de inicialização" #: src/routines/section_helps.ycp:119 -#, fuzzy -#| msgid "Skip Section gracefully on Errors" msgid "&Skip Section gracefully on Errors" -msgstr "Ignorar seção quando houver erros" +msgstr "&Ignorar seção quando houver erros" #: src/routines/section_helps.ycp:120 -#, fuzzy -#| msgid "Boot Partition of Other System" msgid "Boot &Partition of Other System" -msgstr "Partição de inicialização de outro sistema" +msgstr "&Partição de inicialização de outro sistema" #: src/routines/section_widgets.ycp:43 msgid "Image section must have specified kernel image" -msgstr "" +msgstr "A seção de imagem deve ter especificado a imagem do kernel" #: src/routines/section_widgets.ycp:49 -#, fuzzy -#| msgid "" -#| "Archive %1 already exists.\n" -#| "Do you really want to overwrite it?" msgid "Image file doesn't exist now. Do you really want use it?" -msgstr "" -"O arquivo %1 já existe.\n" -"Deseja subtituí-lo?" +msgstr "O arquivo de imagem ainda não existe. Deseja realmente usá-lo?" #: src/routines/section_widgets.ycp:63 -#, fuzzy -#| msgid "" -#| "Archive %1 already exists.\n" -#| "Do you really want to overwrite it?" msgid "Initrd file doesn't exist now. Do you really want use it?" -msgstr "" -"O arquivo %1 já existe.\n" -"Deseja subtituí-lo?" +msgstr "O arquivo initrd ainda não existe. Deseja realmente usá-lo?" #: src/routines/section_widgets.ycp:275 msgid "The name includes unallowable char(s)" -msgstr "" +msgstr "O nome inclui caractere(s) não permitido(s)" #. combo box item #. %1 is X resolution (width) in pixels @@ -2805,13 +2689,11 @@ #: src/routines/section_widgets.ycp:363 msgid "Ask for resolution during boot." -msgstr "" +msgstr "Perguntar por resolução durante a inicialização" #: src/routines/section_widgets.ycp:364 -#, fuzzy -#| msgid "Standard Options" msgid "Standard 8-pixel font mode." -msgstr "Opções Padrão" +msgstr "Modo de fonte padrão de 8 pixels." #. item of a combo box #: src/routines/section_widgets.ycp:366 @@ -2840,14 +2722,8 @@ #. error report #: src/routines/wizards.ycp:37 -#, fuzzy -#| msgid "" -#| "Because of the partitioning, the boot loader\n" -#| "cannot be installed properly." msgid "Because of the partitioning, the boot loader cannot be installed properly." -msgstr "" -"Devido ao particionamento, o carregador de inicialização\n" -"não pode ser instalado corretamente." +msgstr "Devido ao particionamento, o carregador de inicialização não pode ser instalado corretamente." #: src/zipl/helps.ycp:28 msgid "Default Boot Section/Menu" diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-pt_BR-2.18.1/po/iscsi-client.pt_BR.po new/yast2-trans-pt_BR-2.18.1/po/iscsi-client.pt_BR.po --- old/yast2-trans-pt_BR-2.18.1/po/iscsi-client.pt_BR.po 2009-06-09 14:31:58.000000000 +0200 +++ new/yast2-trans-pt_BR-2.18.1/po/iscsi-client.pt_BR.po 2009-06-24 15:06:48.000000000 +0200 @@ -13,7 +13,7 @@ "Project-Id-Version: iscsi-client\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-06-05 10:40+0200\n" -"PO-Revision-Date: 2009-06-06 17:20-0300\n" +"PO-Revision-Date: 2009-06-23 22:56-0300\n" "Last-Translator: Luiz Fernando Ranghetti <elchevive(a)opensuse.org>\n" "Language-Team: Brazilian Portuguese <kde-i18n-pt_BR(a)mail.kde.org>\n" "MIME-Version: 1.0\n" @@ -416,6 +416,10 @@ "automatic is for iSCSI targets to be connected when the iSCSI service itself\n" "starts up." msgstr "" +"manual é para os destinos iSCSI não serem conectados por padrão, o usuário necessita fazê-lo manualmente\n" +"na inicialização é para os destinos iSCSI serem conectados na inicialização, por exemplo, quando o root estiver no\n" +"iSCSI. Bem como isto será avaliado a partir do initrd.\n" +"automático é para os destinos iSCSI serem conectador quando os serviço iSCSI inicializar." #. list of discovered targets #: src/helps.ycp:113 diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-pt_BR-2.18.1/po/security.pt_BR.po new/yast2-trans-pt_BR-2.18.1/po/security.pt_BR.po --- old/yast2-trans-pt_BR-2.18.1/po/security.pt_BR.po 2009-06-05 15:47:45.000000000 +0200 +++ new/yast2-trans-pt_BR-2.18.1/po/security.pt_BR.po 2009-06-24 15:07:47.000000000 +0200 @@ -13,7 +13,7 @@ "Project-Id-Version: security\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-06-05 10:32+0200\n" -"PO-Revision-Date: 2009-03-26 20:27-0300\n" +"PO-Revision-Date: 2009-06-23 22:56-0300\n" "Last-Translator: Luiz Fernando Ranghetti <elchevive(a)opensuse.org>\n" "Language-Team: Brazilian Portuguese <kde-i18n-pt_BR(a)mail.kde.org>\n" "MIME-Version: 1.0\n" @@ -522,22 +522,16 @@ #. Password dialog help #: src/helps.ycp:114 -#, fuzzy -#| msgid "" -#| "Minimum Acceptable Password Length:\n" -#| "The minimum number of characters in an acceptable password. Attempts to\n" -#| "assign passwords with fewer characters are rejected. A zero value\n" -#| "suppresses this check." msgid "" "Minimum Acceptable Password Length:\n" "The minimum number of characters in an acceptable password. Attempts to\n" "assign passwords with fewer characters are rejected. A zero value\n" "suppresses this check. This option can only be modified when Check New Passwords is set." msgstr "" -"Tamanho Mínimo Aceitável de Senha:\n" -"número mínimo de caracteres em uma senha aceitável. As tentativas de\n" +"Tamanho mínimo aceitável de senha:\n" +"O número mínimo de caracteres em uma senha aceitável. As tentativas de\n" "atribuição de senhas com menos caracteres são rejeitadas. O valor zero\n" -"cancela essa verificação." +"cancela essa verificação. Esta opção só pode ser modificada quando Verificar novas senhas for definido." #. Password dialog help 4/8 #: src/helps.ycp:120 diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-pt_BR-2.18.1/po/status.txt new/yast2-trans-pt_BR-2.18.1/po/status.txt --- old/yast2-trans-pt_BR-2.18.1/po/status.txt 2009-06-09 14:33:27.000000000 +0200 +++ new/yast2-trans-pt_BR-2.18.1/po/status.txt 2009-06-24 15:08:17.000000000 +0200 @@ -1,6 +1,6 @@ -Translated : 19716 -Fuzzy : 174 -Untranslated : 108 +Translated : 19796 +Fuzzy : 112 +Untranslated : 90 -------------------- All strings : 19998 99 % are translated ++++++ yast2-trans-sk-2.18.1.tar.bz2 ++++++ diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-sk-2.18.1/po/status.txt new/yast2-trans-sk-2.18.1/po/status.txt --- old/yast2-trans-sk-2.18.1/po/status.txt 2009-06-05 15:10:31.000000000 +0200 +++ new/yast2-trans-sk-2.18.1/po/status.txt 2009-06-24 14:55:38.000000000 +0200 @@ -1,6 +1,6 @@ -Translated : 14493 -Fuzzy : 3613 -Untranslated : 1892 +Translated : 14542 +Fuzzy : 3594 +Untranslated : 1862 -------------------- All strings : 19998 -72 % are translated +73 % are translated diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-sk-2.18.1/po/sudo.sk.po new/yast2-trans-sk-2.18.1/po/sudo.sk.po --- old/yast2-trans-sk-2.18.1/po/sudo.sk.po 2009-06-05 15:10:14.000000000 +0200 +++ new/yast2-trans-sk-2.18.1/po/sudo.sk.po 2009-06-24 14:55:25.000000000 +0200 @@ -12,14 +12,16 @@ "Project-Id-Version: sudo.sk\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-06-05 10:46+0200\n" -"PO-Revision-Date: 2007-09-10 22:02+0200\n" -"Last-Translator: Katarina Machalkova <bubli(a)bubli.org>\n" +"PO-Revision-Date: 2009-06-16 21:24+0100\n" +"Last-Translator: Rastislav Krupanský <rastislav.krupansky(a)gmail.com>\n" "Language-Team: Slovak <sk-i18n(a)lists.linux.sk>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" "X-Generator: KBabel 1.11.2\n" +"X-Poedit-Language: Slovak\n" +"X-Poedit-Country: SLOVAKIA\n" #: src/Sudo.ycp:283 msgid "This rule is a system rule necessary for correct functionality of sudo.\n" @@ -31,7 +33,7 @@ "Really delete?" msgstr "" "Ak ho odstránite, niektoré aplikácie nemusia fungovať správne.\n" -" Naozaj odstrániť?" +"Naozaj odstrániť?" #: src/Sudo.ycp:289 msgid "" @@ -39,17 +41,15 @@ "Really edit? " msgstr "" "Ak ho zmeníte, niektoré aplikácie nemusia fungovať správne.\n" -" Naozaj upraviť?" +"Naozaj upraviť?" #: src/Sudo.ycp:398 msgid "All changes will be lost. Really quit sudo configuration without saving ?" -msgstr "Všetky zmeny budú stratené. Naozaj chcete ukončiť konfiguráciu sudo bez uloženia zmien?" +msgstr "Všetky zmeny budú stratené. Naozaj chcete ukončiť konfiguráciu sudo bez uloženia zmien ?" #: src/Sudo.ycp:431 -#, fuzzy -#| msgid "An error occurred while removing users." msgid "An error occurred while reading users and groups." -msgstr "Vyskytla sa chyba počas odstraňovania používateľov." +msgstr "Vyskytla sa chyba počas načítavania používateľov a skupín." #. Sudo read dialog caption #: src/Sudo.ycp:465 @@ -78,7 +78,7 @@ "(4 integers in the range 128 - 255 separated by dots) \n" "or single integer in the range 0 - 32" msgstr "" -"Platná maska siete sa skladá buď zo 4 celých čísel v intervale 128 - 255\n" +"Platná maska siete sa skladá buď zo 4 celých čísel v intervale 128 - 255 \n" "oddelených bodkami, alebo je to jedno celé číslo v intervale 0 - 32" #: src/complex.ycp:85 @@ -90,16 +90,12 @@ msgstr "Meno hostiteľa alebo sieť" #: src/complex.ycp:120 -#, fuzzy -#| msgid "Add New Host to the Alias" msgid "Add New User to the Alias" -msgstr "Pridať nového hostiteľa do aliasu" +msgstr "Pridať nového používateľa do aliasu" #: src/complex.ycp:122 -#, fuzzy -#| msgid "Local and System Users" msgid "Local and System Users (Groups)" -msgstr "Lokálni a systémoví používatelia" +msgstr "Lokálni a systémoví používatelia (skupiny)" #: src/complex.ycp:149 #, ycp-format @@ -120,12 +116,11 @@ #: src/complex.ycp:174 msgid "Parameters (optional)" -msgstr "Parametry (voliteľné)" +msgstr "Parametre (voliteľné)" # yes-no popup #. yes-no popup - an error occured when saving the configuration #: src/complex.ycp:264 -#, fuzzy msgid "Saving sudoer's configuration failed. Change the settings?" msgstr "Uloženie konfigurácie sudo zlyhalo. Zmeniť nastavenia?" @@ -140,33 +135,33 @@ #: src/dialog-cmnd.ycp:42 src/dialog-host.ycp:46 src/dialog-runas.ycp:46 #: src/dialog-user.ycp:46 msgid "Alias Name (in CAPITALS)" -msgstr "" +msgstr "Názov aliasu (VEĽKÝMI PÍSMENAMI)" #: src/dialog-cmnd.ycp:43 msgid "Command Names or Directories in the Alias" -msgstr "Názvy príkazov alebo adresárov v aliase" +msgstr "Názvy príkazov, alebo adresárov v aliase" #: src/dialog-cmnd.ycp:46 src/dialog-spec.ycp:56 msgid "Parameters" -msgstr "Parametry" +msgstr "Parametre" # Popup::Error text #: src/dialog-cmnd.ycp:70 src/dialog-host.ycp:71 src/dialog-runas.ycp:74 #: src/dialog-user.ycp:71 msgid "Alias name must not be empty." -msgstr "Názov aliasu nesmie byť prázdny" +msgstr "Názov aliasu nesmie byť prázdny." #: src/dialog-cmnd.ycp:76 src/dialog-host.ycp:77 src/dialog-runas.ycp:80 #: src/dialog-user.ycp:77 #, ycp-format msgid "Alias with name %1 already exists" -msgstr "Alias s názvom %1 už existuje." +msgstr "Alias s názvom %1 už existuje" # message box #: src/dialog-cmnd.ycp:82 src/dialog-host.ycp:85 src/dialog-runas.ycp:86 #: src/dialog-user.ycp:83 msgid "Alias must have at least one member." -msgstr "Alias musí obsahovať aspoň jednu položku" +msgstr "Alias musí obsahovať aspoň jednu položku." #: src/dialog-host.ycp:38 msgid "New Host Alias" @@ -178,13 +173,11 @@ #: src/dialog-host.ycp:47 msgid "Hostnames or Networks in the Alias" -msgstr "Mená hostiteľov alebo sietí v aliase" +msgstr "Mená hostiteľov, alebo sietí v aliase" #: src/dialog-host.ycp:48 -#, fuzzy -#| msgid "Hostname or Network" msgid "Host Names/Networks" -msgstr "Meno hostiteľa alebo sieť" +msgstr "Mená hostiteľov/sietí" #: src/dialog-runas.ycp:35 msgid "New RunAs Alias" @@ -196,19 +189,16 @@ # table entry #: src/dialog-runas.ycp:49 src/dialog-user.ycp:48 -#, fuzzy -#| msgid "Class Members" msgid "Alias Members" -msgstr "Členovia triedy" +msgstr "Členovia aliasu" #: src/dialog-spec.ycp:32 msgid "New Sudo Rule" -msgstr "" +msgstr "Nové sudo pravidlo" #: src/dialog-spec.ycp:35 -#, fuzzy msgid "Existing Sudo Rule " -msgstr "Existujúci NIS používateľ" +msgstr "Existujúce sudo pravidlo " #: src/dialog-spec.ycp:42 msgid "User, Group or User Alias" @@ -220,7 +210,7 @@ #: src/dialog-spec.ycp:48 msgid "RunAs or RunAs Alias" -msgstr "SpustiťAko alebo alias SpustiťAko" +msgstr "SpustiťAko, alebo alias SpustiťAko" #: src/dialog-spec.ycp:51 msgid "No Password" @@ -233,12 +223,12 @@ # Popup::Error text #: src/dialog-spec.ycp:97 msgid "User name must not be empty." -msgstr "Meno používateľa nesmie byť prázdne" +msgstr "Meno používateľa nesmie byť prázdne." # error popup #: src/dialog-spec.ycp:102 msgid "Host name must not be empty." -msgstr "Meno hostiteľa nesmie byť prázdne" +msgstr "Meno hostiteľa nesmie byť prázdne." # message box #: src/dialog-spec.ycp:111 @@ -266,44 +256,40 @@ msgstr "Nie" #: src/dialogs.ycp:174 -#, fuzzy, ycp-format +#, ycp-format msgid "" "Host alias %1 is being used in one of sudo rules.\n" "Deleting it may result in an inconsistent sudo configuration file. Really delete it ?\n" msgstr "" "Alias hostiteľa %1 sa používa v jednom z pravidiel sudo.\n" -"Jeho odstránenie môže zanechať konfiguráciu sudo v nekonzistentnom stave.\n" -"Naozaj odstrániť?" +"Jeho odstránenie môže zanechať konfiguráciu sudo v nekonzistentnom stave. Naozaj odstrániť ?\n" #: src/dialogs.ycp:217 -#, fuzzy, ycp-format +#, ycp-format msgid "" "User alias %1 is being used in one of sudo rules .\n" "Deleting it may result in an inconsistent sudo configuration file. Really delete it ?\n" msgstr "" -"Alias používateľa %1 sa používa v jednom z pravidiel sudo.\n" -"Jeho odstránenie môže zanechať konfiguráciu sudo v nekonzistentnom stave.\n" -"Naozaj odstrániť?" +"Alias používateľa %1 sa používa v jednom z pravidiel sudo .\n" +"Jeho odstránenie môže zanechať konfiguráciu sudo v nekonzistentnom stave. Naozaj odstrániť ?\n" #: src/dialogs.ycp:259 -#, fuzzy, ycp-format +#, ycp-format msgid "" "RunAs alias %1 is being used in one of sudo rules.\n" "Deleting it may result in an inconsistent sudo configuration file. Really delete it ?\n" msgstr "" "Alias SpustiťAko %1 sa používa v jednom z pravidiel sudo.\n" -"Jeho odstránenie môže zanechať konfiguráciu sudo v nekonzistentnom stave.\n" -"Naozaj odstrániť?" +"Jeho odstránenie môže zanechať konfiguráciu sudo v nekonzistentnom stave. Naozaj odstrániť ?\n" #: src/dialogs.ycp:302 -#, fuzzy, ycp-format +#, ycp-format msgid "" "Command alias %1 is being used in one of sudo rules.\n" "Deleting it may result in an inconsistent sudo configuration file. Really delete it ?\n" msgstr "" "Alias príkazov %1 sa používa v jednom z pravidiel sudo.\n" -"Jeho odstránenie môže zanechať konfiguráciu sudo v nekonzistentnom stave.\n" -"Naozaj odstrániť?" +"Jeho odstránenie môže zanechať konfiguráciu sudo v nekonzistentnom stave. Naozaj odstrániť ?\n" #: src/dialogs.ycp:378 msgid "Users" @@ -326,23 +312,20 @@ msgstr "Príkazy" #: src/dialogs.ycp:386 -#, fuzzy msgid "Up" -msgstr "&Hore" +msgstr "Hore" #: src/dialogs.ycp:387 -#, fuzzy msgid "Down" -msgstr "&Dolu" +msgstr "Dolu" #: src/dialogs.ycp:398 msgid "Rules for sudo" msgstr "Pravidlá sudo" #: src/dialogs.ycp:399 -#, fuzzy msgid "Rules for sudo " -msgstr "Pravidlá sudo" +msgstr "Pravidlá pre sudo " #: src/dialogs.ycp:408 src/dialogs.ycp:429 src/dialogs.ycp:450 #: src/dialogs.ycp:471 @@ -413,7 +396,6 @@ #. User Specification help 1/6 #: src/helps.ycp:61 -#, fuzzy msgid "" "<big>Rules for sudo</big> \n" "\tRules for sudo basically determine which commands an user may run \n" @@ -424,11 +406,11 @@ "\t\n" "\t" msgstr "" -"<big>Pravidlo pre používateľov</big> \n" -"\tPravidlo pre sudo v podstate určuje, ktoré príkazy smie používateľ spúšťať\n" +"<big>Pravidlá pre používateľov</big> \n" +"\tPravidlá pre sudo v podstate určujú, ktoré príkazy smie používateľ spúšťať \n" "\tna daných hostiteľoch (voliteľne tiež ako ktorý iný používateľ). Každé pravidlo je\n" -"\ttrojica, ktorá sa skladá z mena používateľa a hostiteľa a zoznamu príkazov\n" -"\tvoliteľne tiež s určením SpustiťAko a ďalších príznakov. Toto je zhrnuté\n" +"\ttrojica, ktorá sa skladá z mena používateľa a hostiteľa a zoznamu príkazov \n" +"\tvoliteľne tiež s určením SpustiťAko a ďalších príznakov. Toto je zhrnuté \n" "\tv následujúcej tabuľke. \n" "\t\n" "\t" @@ -442,6 +424,11 @@ "\t\n" "\t" msgstr "" +"StĺpecPoužívatelia označuje lokálneho, alebo systémového používateľa, alebo alias používateľa. \n" +"\tStĺpecHostitelia určuje na ktorých hostiteľoch, alebo skupinách \n" +"\thostiteľov určené aliasom hostiteľa, môže používateľ spúšťať uvedené príkazy.\n" +"\t\n" +"\t" #. User Specification help 3/6 #: src/helps.ycp:76 @@ -453,6 +440,12 @@ "\t\n" "\t" msgstr "" +"Stĺpec SpustiťAko je\n" +"\tvoliteľný parameter, obsahujúci menou používateľa (alebo aliasu), ktorého prístupové práva\n" +"\tbudú použité pre spustenie príkazov. Bez_hesla je príznak, označujúci či\n" +"\tsa používatelia potrebujú autorizovať pred spustením príkazov.\n" +"\t\n" +"\t" #. User Specification help 4/6 #: src/helps.ycp:83 @@ -462,6 +455,10 @@ "\t\n" "\t" msgstr "" +"Sada príkazov, ktoré môže používateľ spúšťať na uvedených hostiteľoch, je zhrnuté \n" +"\tv stĺpciPríkazy. \n" +"\t\n" +"\t" #. User Specification help 5/6 #: src/helps.ycp:88 @@ -471,20 +468,23 @@ "\t\n" "\t" msgstr "" +" Pre pridanie nového pravidla, kliknite na tlačidlo Pridať a vyplňte príslušné \n" +"\tpoložky. Používateľské meno, názov hostiteľa a zoznam príkazov nesmú byť prázdne.\n" +"\t\n" +"\t" #. User Specification help 5/6 #: src/helps.ycp:93 -#, fuzzy msgid "" "To edit existing rule, select an entry from the table and click on \n" "\tEdit button. To delete selected entry, click on Delete button.\n" "\t \n" "\t" msgstr "" -"\n" -"K úpravám alebo odstráneniu používateľa ho vyberte zo zoznamu\n" -"a stlačte Upraviť alebo Odstrániť.\n" -"\n" +"K úpravám, alebo odstráneniu používateľa ho vyberte zo zoznamu \n" +"\ta stlačte Upraviť, alebo Odstrániť.\n" +"\t \n" +"\t" #. Single User Specification help 1/4 #: src/helps.ycp:98 @@ -496,6 +496,12 @@ "\t\n" "\t" msgstr "" +"Používateľské meno, alebo alias môže byť uvedený jedným používateľským menom (napr.foo), menom skupiny\n" +"\ts predponou '%' (napr. %bar), alebo názvom aliasu používateľa. Ak \n" +"\tkľúčové slovo 'ALL' je použité, platí nastavenie pre všetkých používateľov. Vyberte z existujúcich používateľov, skupín a aliasov \n" +"\tv rozbalovacej ponuke, alebo zadajte vlastnú hodnotu. \n" +"\t\n" +"\t" #: src/helps.ycp:104 msgid "" @@ -507,6 +513,13 @@ "\t\n" "\t" msgstr "" +"PoložkaMeno hostiteľa, alebo alias pozostáva buď z mena hostiteľa, (napr. www.example.com), jednej IP \n" +"\tadresy (napr. 192.168.0.1), IP adresy kombinovanej so sieťovou maskou, alebo aliasu hostiteľa. Ak môžu byť príkazy\n" +"\tspustené na rôznom hostiteľovi, použite kľúčové slovo 'ALL'. Meno hostiteľa, alebo IP adresa je porovnávaná s vaším menom hostiteľa,\n" +"\talebo IP adresou, takže ak nemáte v úmysle zdielať jeden súbor /etc/sudoers medzi viacerými počítačmi, \n" +"\t'ALL' alebo 'localhost' položka bude dostatočná pre takmer všetky účely. \n" +"\t\n" +"\t" #. Single User Specification help 2/4 #: src/helps.ycp:112 @@ -519,6 +532,13 @@ "\t\n" "\t" msgstr "" +"SpustiťAko používateľ, alebo alias je voliteľný parameter špecifikujúci používateľa, \n" +"\tktorého prístupové práva \n" +"\tbudú použité pre spustenie špecifického príkazu. Ak je prázdny, ako štandardný používateľ je\n" +"\troot. To môže byť jeden používateľ, skupina s predponou '%', alebo názov aliasu spustiť_ako\n" +"\tVyberte z existujúcich používateľov, skupín a aliasov v rozbalovacej ponuke, alebo zadajte vlastné hodnoty.\n" +"\t\n" +"\t" #. Single User Specification help 3/4 #: src/helps.ycp:120 @@ -530,6 +550,12 @@ "\t\n" "\t" msgstr "" +"Bez hesla je voliteľný príznak. Zvyčajne sa používatelia musia overiť\n" +"\tsami (t.j. zadať svoje heslo, nie heslo roota) pred spustením špecifického \n" +"\tpríkazu. Ak chcete zakázať toto overenie, nastavte príznak\n" +"\tbez hesla na 'Áno'\n" +"\t\n" +"\t" #. Single User Specification help 4/4 #: src/helps.ycp:127 @@ -541,6 +567,12 @@ "\t\n" "\t" msgstr "" +"TabuľkaPríkazy pre spustenie je zoznam príkazov (voliteľne s\n" +"\tparametrami), adresárov a aliasov príkazov, ktoré môže spúšťať konkrétny \n" +"\tpoužívateľ. Ak je použitý názov adresára, hocijaký príkaz v tom adresári môže byť spustený. \n" +"\tKľúčové slovo 'ALL' zastupuje všetky príkazy, používajte ho opatrne.\n" +"\t\n" +"\t" #: src/helps.ycp:133 msgid "" @@ -549,6 +581,10 @@ "\tand click on Delete button.\n" "\t" msgstr "" +"Pre pridanie nového príkazu, kliknite na tlačidlo Pridať, vyplňte v názve príkazu s voliteľnými\n" +"\tparametrami a kliknite na OK. Pre odstránenie príkazu, vyberte príslušnú položku z tabuľky\n" +"\ta kliknite na tlačidlo Vymazať.\n" +"\t" #. User Aliases help 1/3 #: src/helps.ycp:138 @@ -559,6 +595,11 @@ "\t \n" "\t" msgstr "" +"<big>Aliasy používateľov</big> \n" +"\tV tomto dialógu môžete konfigurovať aliasy používateľov. Alias používateľa je sada používateľov s\n" +"\tjedinečným názvom. Tento názov je použitý programom sudo ako, odkaz na všetkých používateľov v sade. \n" +"\t \n" +"\t" #. User Aliases help 2/3 #: src/helps.ycp:144 @@ -568,20 +609,23 @@ "\t\n" "\t" msgstr "" +"Ak chete pridať nový alias používateľa, kliknite na tlačidlo Pridať a vyplňte príslušné položky. \n" +"\tNázov aliasu a zoznam používateľov v aliase nesmú byť prázdne. \n" +"\t\n" +"\t" #. User Aliases help 3/3 #: src/helps.ycp:149 -#, fuzzy msgid "" "To edit existing user alias, select an entry from the table and click on Edit\n" "\tbutton. To delete selected entry, click on Delete button. \n" "\t\n" "\t" msgstr "" -"\n" -"K úpravám alebo odstráneniu používateľa ho vyberte zo zoznamu\n" -"a stlačte Upraviť alebo Odstrániť.\n" -"\n" +"K úpravám, alebo odstráneniu používateľa ho vyberte zo zoznamu\n" +"\ta stlačte Upraviť, alebo Odstrániť. \n" +"\t\n" +"\t" #. Host Aliases help 1/3 #: src/helps.ycp:154 @@ -592,6 +636,11 @@ "\t\n" "\t" msgstr "" +"<big>Aliasy hostiteľa</big> \n" +"\tV tomto dialógu môžete konfigurovať aliasy hostiteľa. Alias hostiteľa je sada hostiteľov s\n" +"\tjedinečným názvom. Tento názov je použitý programom sudo, ako odkaz na všetkých hostiteľov v sade. \n" +"\t\n" +"\t" #. Host Aliases help 2/3 #: src/helps.ycp:160 @@ -601,20 +650,23 @@ "\t\n" "\t" msgstr "" +"Ak chcete pridať nový alias hostiteľa, kliknite na tlačidlo Pridať a vyplňte príslušné položky. \n" +"\tNázov aliasu a zoznam hostiteľov v aliase nesmú byť prázdne. \n" +"\t\n" +"\t" #. Host Aliases help 3/3 #: src/helps.ycp:165 -#, fuzzy msgid "" "To edit existing host alias, select an entry from the table and click on Edit\n" "\tbutton. To delete selected entry, click on Delete button. \n" "\t\n" "\t" msgstr "" -"\n" -"K úpravám alebo odstráneniu používateľa ho vyberte zo zoznamu\n" -"a stlačte Upraviť alebo Odstrániť.\n" -"\n" +"K úpravám, alebo odstráneniu používateľa ho vyberte zo zoznamu\n" +"\ta stlačte Upraviť, alebo Odstrániť. \n" +"\t\n" +"\t" #. RunAs Aliases help 1/3 #: src/helps.ycp:170 @@ -625,6 +677,11 @@ "\t \n" "\t" msgstr "" +"<big>Aliasy SpustiťAko</big> \n" +"\tV tomto dialógu môžete konfigurovať aliasy SpustiťAko. Aliasy SpustiťAko, je sada používateľov s\n" +"\tjedinečným názvom. Tento názov je použitý programom sudo ako, odkaz na všetkých používateľov v sade. \n" +"\t \n" +"\t" #. RunAs Aliases help 2/3 #: src/helps.ycp:176 @@ -634,20 +691,23 @@ "\t\n" "\t" msgstr "" +"Ak chcete pridať nový alias SpustiťAko, kliknite na tlačidlo Pridať a vyplňte príslušné položky. \n" +"\tNázov aliasu a zoznam používateľov v aliase nesmú byť prázdne. \n" +"\t\n" +"\t" #. RunAs Aliases help 3/3 #: src/helps.ycp:181 -#, fuzzy msgid "" "To edit existing RunAs alias, select an entry from the table and click on Edit\n" "\tbutton. To delete selected entry, click on Delete button. \n" "\t\n" "\t" msgstr "" -"\n" -"K úpravám alebo odstráneniu používateľa ho vyberte zo zoznamu\n" -"a stlačte Upraviť alebo Odstrániť.\n" -"\n" +"K úpravám, alebo odstráneniu používateľa ho vyberte zo zoznamu\n" +"\ta stlačte Upraviť, alebo Odstrániť. \n" +"\t\n" +"\t" #. Command Aliases help 1/3 #: src/helps.ycp:186 @@ -659,6 +719,12 @@ "\t\n" "\t" msgstr "" +"<big>Aliasy príkazu</big> \n" +"\tv tomto dialógu môžete konfigurovať aliasy príkazu. Alias príkazu je sada príkazov \n" +"\t(voliteľne s parametrami), ktorá ma jedinečný názov. Tento názov sa potom používa na označenie\n" +"\tvšetkých príkazov v tejto sade v konfigurácii sudo. \n" +"\t\n" +"\t" #. Command Aliases help 2/3 #: src/helps.ycp:193 @@ -668,6 +734,10 @@ "\t\n" "\t" msgstr "" +"Ak chcete pridať nový alias príkazu, kliknite na tlačidlo Pridať a vyplňte príslušné položky. \n" +"\tNázov aliasu a zoznam príkazov v aliase nesmú byť prázdne. \n" +"\t\n" +"\t" #. Command Aliases help 3/3 #: src/helps.ycp:198 @@ -678,7 +748,7 @@ "\t" msgstr "" "K úpravám alebo odstráneniu aliasu príkazov ho vyberte zo zoznamu\n" -"a stlačte Upraviť. Pre odstránenie vybranej položky stlačte Odstrániť.\n" +"a stlačte Upraviť. Pre odstránenie vybranej položky stlačte Odstrániť. \n" "\t\n" "\t" @@ -691,6 +761,11 @@ "\t\n" "\t" msgstr "" +"<big>Alias používateľa</big> \n" +"\tAlias používateľa pozostáva z jedného, alebo viacerých používateľov, skupín systému (s predponou '%'), alebo iných\n" +"\taliasov používateľa. Má jeden názov (musí obsahovať iba veľké písmená, číslice a podčiarkovník), ktorý sa potom používa na označenie všetkých používateľov v tomto aliase.\n" +"\t\n" +"\t" #. Single User Alias Help 2/3 #: src/helps.ycp:211 src/helps.ycp:254 @@ -702,6 +777,12 @@ "\t\n" "\t" msgstr "" +"Zadajte jedinečný názov do položky Názov aliasu. Ak chcete pridať používateľov, alebo skupiny\n" +"\tdo aliasu, vyberte meno používateľa, alebo skupiny s rozbalovacej ponuky a kliknite na tlačidlo Pridať.\n" +"\tPre odstránenie používateľa z aliasu, vyberte príslušnú položku z tabuľky a kliknite na\n" +"\ttlačidloOdstrániť. Pre ukončenie konfigurácie, kliknite na OK.\n" +"\t\n" +"\t" #. Single User Alias Help 3/3 #. Single Host Alias Help 4/4 @@ -712,6 +793,8 @@ "Note: Alias name must not be empty. Each alias must have at least one member.\n" "\t" msgstr "" +"Poznámka: Názov aliasu nesmie byť prázdny. Každý alias musí mať aspoň jedného člena.\n" +"\t" #. Single Host Alias Help 1/4 #: src/helps.ycp:222 @@ -725,6 +808,14 @@ "\t\n" "\t" msgstr "" +"<big>Alias hostiteľa</big> \n" +"\tAlias hostiteľa pozostáva z jedného, alebo viacerých názvov hostiteľov, IP adries, IP adries\n" +"\tkombinovaných so sieťovou maskou v notácii (napr. 192.168.0.0/255.255.255.0), alebo\n" +"\tčíslom CIDR bitovej notácie (napr. 192.168.0.0/24), alebo iných aliasov hostiteľov. Má jeden \n" +"\tnázov (musí obsahovať iba veľké písmená, číslice a podčiarkovníky), ktorý \n" +"\tsa potom používa na označenie všetkých používateľov v tomto aliase.\n" +"\t\n" +"\t" #. Single Host Alias Help 2/4 #: src/helps.ycp:231 @@ -735,6 +826,11 @@ "\t\n" "\t" msgstr "" +"Zadajte jedinečný názov do položky Názov aliasu. Ak chcete pridať hostiteľov do\n" +"\taliasu, kliknite na tlačidlo Pridať. Objaví sa vyskakovacie okno, kde môžete zadať\n" +"\tplatný názov hostiteľa, alebo IP adresu a potom kliknite naOK.\n" +"\t\n" +"\t" #. Single Host Alias Help 3/4 #: src/helps.ycp:237 @@ -744,6 +840,10 @@ "\t\n" "\t" msgstr "" +"Ak chcete odstrániť hostiteľa z aliasu, vyberte príslušnú položku z tabuľky a kliknite\n" +"\tna tlačidlo Odstrániť. Pre ukončenie konfigurácie, kliknite na OK.\n" +"\t\n" +"\t" #. Single RunAs Alias Help 1/2 #: src/helps.ycp:246 @@ -756,6 +856,13 @@ "\t\n" "\t" msgstr "" +"<big>Alias SpustiťAko</big> \n" +"\tAlias SpustiťAko je veľmi podobný aliasu používateľa. Pozostáva z jedného, alebo viacerých používateľov, skupín systému \n" +"\t(s predponou '%'), alebo iných aliasov SpustiťAko. Má jeden názov (musí obsahovať \n" +"\tiba veľké písmená, číslice a podčiarkovník), ktorý sa potom používa na označenie všetkých používateľov \n" +"\tv tomto aliase.\n" +"\t\n" +"\t" #. Single Command Alias Help 1/4 #: src/helps.ycp:265 @@ -770,6 +877,15 @@ "\t\n" "\t" msgstr "" +"<big>Alias príkazu</big> \n" +"\tAlias príkazu je zoznam jedného, alebo viacerých príkazov (s voliteľnými prarametrami), adresárov, alebo\n" +"\tiných aliasov príkazu. Má jeden názov (musí obsahovať iba veľké písmená, číslice a\n" +"\t podčiarkovník), ktorý sa \n" +"\tpotom používa na označenie všetkých príkazov v tomto aliase. Príkaz môže mať voliteľne jeden, alebo viac\n" +"\tšpecifikovaných parametrov. Ak sú parametre uvedené, používatelia môžu spúšťať príkaz iba s týmito parametrami. Ak je \n" +"\tpoužitý názov adresára, hocijaký príkaz v tom adresári môže byť spustený. \n" +"\t\n" +"\t" #. Single Command Alias Help 2/4 #: src/helps.ycp:275 @@ -780,6 +896,11 @@ "\tspecify command parameters in Parameters text entry\n" "\t" msgstr "" +"Zadajte jedinečný názov do položky Názov aliasu. Ak chcete pridať nový príkaz do aliasu,\n" +"\tkliknite na tlačidlo Pridať.Objaví sa vyskakovacie okno, kde môžete zadať názov príkazov,\n" +"\talebo vybrať z prehliadača súborov, kliknutím na tlačidlo Prehliadať . Dodatočne môžete\n" +"\tšpecifikovať parametre príkazu v položkeParametre\n" +"\t" #. Single Command Alias Help 3/4 #: src/helps.ycp:281 @@ -789,36 +910,12 @@ "\t\n" "\t" msgstr "" +"Ak chcete odstrániť položku z aliasu, vyberte príslušnú položku z tabuľky a kliknite\n" +"\tna tlačidlo Odstrániť. Pre ukončenie konfigurácie, kliknite na OK.\n" +"\t\n" +"\t" #. Command line help text for the Xsudo module #: src/sudo.ycp:54 msgid "Configuration of sudo" msgstr "Konfigurácia sudo" - -# sound Read dialog caption: -#~ msgid "Initializing sudo Configuration" -#~ msgstr "Inicializujem konfiguráciu sudo" - -#~ msgid "Read sudo settings" -#~ msgstr "Načítanie nastavení sudo" - -#~ msgid "Read local users and groups" -#~ msgstr "Načítanie lokálnych používateľov a skupín" - -#~ msgid "Reading sudo settings..." -#~ msgstr "Načítavam nastavenia sudo..." - -#~ msgid "Reading local users and groups..." -#~ msgstr "Načítavam lokálnych používateľov a skupiny..." - -#~ msgid "Cannot read /etc/passwd." -#~ msgstr "Nepodarilo sa načítať /etc/passwd" - -#~ msgid "New User Specification" -#~ msgstr "Nové pravidlo" - -#~ msgid "Existing User Specification" -#~ msgstr "Existujúce pravidlo" - -#~ msgid "User Specification" -#~ msgstr "Pravidlo pre používateľov" ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit gtk2-engine-murrine for openSUSE:Factory
by root＠Hilbert.suse.de 29 Jun '09

29 Jun '09

Hello community, here is the log from the commit of package gtk2-engine-murrine for openSUSE:Factory checked in at Mon Jun 29 17:35:47 CEST 2009. -------- --- GNOME/gtk2-engine-murrine/gtk2-engine-murrine.changes 2009-05-06 17:59:34.000000000 +0200 +++ gtk2-engine-murrine/gtk2-engine-murrine.changes 2009-06-24 14:45:21.000000000 +0200 @@ -1,0 +2,5 @@ +Wed Jun 24 14:43:09 CEST 2009 - sbrabec(a)suse.cz + +- Re-added missing baselibs.conf (bnc#354164). + +------------------------------------------------------------------- calling whatdependson for head-i586 New: ---- baselibs.conf ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ gtk2-engine-murrine.spec ++++++ --- /var/tmp/diff_new_pack.nM6707/_old 2009-06-29 17:35:28.000000000 +0200 +++ /var/tmp/diff_new_pack.nM6707/_new 2009-06-29 17:35:28.000000000 +0200 @@ -20,7 +20,7 @@ Name: gtk2-engine-murrine Version: 0.90.3 -Release: 2 +Release: 3 Url: http://ftp.gnome.org/pub/GNOME/sources/murrine/ License: GPL v2 or later Group: System/GUI/XFCE @@ -61,55 +61,3 @@ %{_datadir}/gtk-engines/murrine.xml %changelog -* Wed May 06 2009 prusnak(a)suse.cz -- themes split into separate package gtk2-theme-murrine -* Wed Apr 29 2009 prusnak(a)suse.cz -- updated to 0.90 series (0.90.3) - * Too many changes to be listed, let's take a summary. - * This new version is extremely customizable with a huge number of new. - options. Those new options allow the user to achieve an incredible. - variety of styles. -- added themes: - * MurrinaChrome - * MurrinaBlu-0.32 - * MurrinaElement - * MurrinaCandido - * MurrinaCream - * Murrine-Light - * Murrine-Sky - * Murrine-Gray - * Kiwi - * Neon - * freezy-themes_2.8.0 - * shiki-colors-murrine-3.7 -* Tue Nov 25 2008 sbrabec(a)suse.cz -- Supplement gtk2-32bit/gtk2-64bit in baselibs.conf (bnc#354164). -* Thu Aug 14 2008 prusnak(a)suse.cz -- updated to 0.60 (SVN revision 94) -- added Shiki-Color themes -* Thu Jun 19 2008 prusnak(a)suse.cz -- added themes: - * MurrinaCandyDuo - * MurrinaEternal - * MurrinaGonxical - * MurrinaGperfection - * MurrinaGraphiteGentle - * Murrina-Inspirat - * MurrinaLily - * MurrinaX-2 -* Thu Jun 19 2008 prusnak(a)suse.cz -- added themes: - * Caramello - * MurrinaAquaIsh - * MurrinaBlue - * MurrinaElement - * MurrinaFancyCandy - * MurrinaGilouche - * MurrinaLoveGray - * MurrinaOranche - * MurrinaOransun - * MurrinaTango - * MurrinaVerdeOlivo - * MurrineRounded -* Mon Jun 16 2008 bwalle(a)suse.de -- new package ++++++ baselibs.conf ++++++ gtk2-engine-murrine supplements "packageand(gtk2-engine-murrine:gtk2-<targettype>)" ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit tcsh for openSUSE:Factory
by root＠Hilbert.suse.de 29 Jun '09

29 Jun '09

Hello community, here is the log from the commit of package tcsh for openSUSE:Factory checked in at Mon Jun 29 17:28:13 CEST 2009. -------- --- tcsh/tcsh.changes 2009-03-31 15:45:02.000000000 +0200 +++ tcsh/tcsh.changes 2009-06-23 11:22:06.000000000 +0200 @@ -1,0 +2,6 @@ +Tue Jun 23 11:18:55 CEST 2009 - werner(a)suse.de + +- Add four unknown colorls variables (rs, ca, hl, and cl) used + by dircolors but not by the tcsh ls-F builtin (bnc#494406) + +------------------------------------------------------------------- calling whatdependson for head-i586 New: ---- tcsh-6.16.00-colorls.dif ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ tcsh.spec ++++++ --- /var/tmp/diff_new_pack.q20001/_old 2009-06-29 17:23:29.000000000 +0200 +++ /var/tmp/diff_new_pack.q20001/_new 2009-06-29 17:23:29.000000000 +0200 @@ -21,12 +21,12 @@ Name: tcsh BuildRequires: ncurses-devel Url: http://www.tcsh.org/ -License: BSD 3-Clause +License: BSD 3-clause (or similar) Group: System/Shells Requires: gawk textutils AutoReqProv: on Version: 6.16.00 -Release: 2 +Release: 3 Summary: The C SHell Source: ftp.astron.com:/pub/tcsh/tcsh-6.16.00.tar.bz2 Source1: nls-iconv @@ -42,6 +42,7 @@ Patch7: tcsh-6.15.00-blanks.dif Patch8: tcsh-6.15.00-fullpath.dif Patch9: tcsh-6.16.00-grabpgrp.dif +Patch10: tcsh-6.16.00-colorls.dif BuildRoot: %{_tmppath}/%{name}-%{version}-build %description @@ -70,6 +71,7 @@ ### %patch7 -p0 -b .blanks %patch8 -p0 -b .fullpath %patch9 -p0 -b .pgrp +%patch10 -p0 -b .colorls %patch sh $RPM_SOURCE_DIR/nls-iconv @@ -152,225 +154,3 @@ %{_datadir}/locale/*/LC_MESSAGES/tcsh %changelog -* Tue Mar 31 2009 werner(a)suse.de -- Also enable patch for bnc#472866 -* Wed Mar 25 2009 werner(a)suse.de -- Update to tcsh version V6.16.00 -- Add patch to avoid endless loop due incorrect tty process group - (bnc#472866) -* Wed Jan 21 2009 werner(a)suse.de -- Reenable Alt-BackSpace for delete word in XTerm in UTF-8 mode -* Wed Nov 26 2008 werner(a)suse.de -- For commands with full execution path bypass correction algorithm - if the command is found (bnc#444992) -* Wed Nov 05 2008 werner(a)suse.de -- Disable patch for bnc#437295 as it cause trouble (bnc#441654) - and the gcc of openSuSE 11.1 seems to be safe -* Tue Oct 21 2008 werner(a)suse.de -- Command line expansion: Allow not only "compress" for co<TAB> - but any other command starting with "co" (bnc#437295) -* Wed Oct 08 2008 werner(a)suse.de -- Make code of last change unambiguous -* Mon Oct 06 2008 werner(a)suse.de -- Avoid blanks at the beginning of command lists (bnc#431661) -* Fri Jun 13 2008 werner(a)suse.de -- Add complete rule for local executables ./* -* Thu Dec 20 2007 werner(a)suse.de -- Oops ... also apply the patch for bug ##331627 (bug #349577) -* Mon Oct 15 2007 werner(a)suse.de -- Improve bug fix (bug #331627) -* Fri Oct 12 2007 werner(a)suse.de -- Fix save history bug: do not jump out from handler for pending - signals like for SIGHUP, just run the handler up to its end and - ignore any error happen to be interrupted (bug #331627) -* Tue Aug 28 2007 werner(a)suse.de -- Correct boolean expression for normalize-command (bug #304903) -* Mon Jul 23 2007 werner(a)suse.de -- Add workaround to avoid run onto already cleaned stack pointer - after an error (bug #293395) -* Thu Jul 19 2007 werner(a)suse.de -- Small correction in bindkey.tcsh: for urxvt, mlterm, and konsole -* Mon Jul 16 2007 werner(a)suse.de -- Update to tcsh version V6.15.00 - * fix extension eating windows code - * fix loop in %%R history expansion - * sched +X source file disables interrupts (Mike Sullivan) - * One off copying macro buffers - * Avoid infinite loops in :ga modifiers when the LHS is a - substring of the RHS. -- Update bindkey.tcsh to fit current xterm and others (bug #262330) -* Thu Mar 29 2007 rguenther(a)suse.de -- Add ncurses-devel BuildRequires. -* Mon Feb 26 2007 werner(a)suse.de -- Expand local ./files for manual pages even for tcsh (#248865) -* Wed Aug 16 2006 aj(a)suse.de -- Remove unneeded BuildRequires. -* Wed Jun 21 2006 werner(a)suse.de -- Do not overwrite memory by not initialized Char array (#186669) -* Wed Apr 26 2006 werner(a)suse.de -- Fix typo in compelete macro for the command man -* Tue Apr 25 2006 werner(a)suse.de -- Add new LS_COLORS variables to avoid error message (bug #168601) -* Mon Apr 10 2006 werner(a)suse.de -- Tcsh completion: expand also for sections of posix manual pages - and include section 0 into search scheme (bug #160782) -* Thu Mar 23 2006 werner(a)suse.de -- Source the users ~/.cshrc and ~/.login in the traditional order, - nevertheless the system wide /etc/csh.cshrc and /etc/csh.login - will be sourced in the natual order (bug #160278) -* Mon Feb 06 2006 werner(a)suse.de -- Make $< operator work even when fed by pipe (bug #147724) -* Wed Jan 25 2006 mls(a)suse.de -- converted neededforbuild to BuildRequires -* Tue Oct 25 2005 werner(a)suse.de -- Switch order of sourcing csh.login csh.cshrc, now csh.login - comes first to provide all exported environment variables. -* Thu Aug 18 2005 werner(a)suse.de -- Update to tcsh 6.14.00, the wide character version (bug #104108). -* Mon May 23 2005 werner(a)suse.de -- Make mh handling more smarter -* Fri Apr 01 2005 werner(a)suse.de -- Gcc4 does not allow function prototype declaration within other - function prototype declaration even if the internals are static. -* Fri Oct 08 2004 werner(a)suse.de -- Make fcntl call with O_LARGEFILE portable (bug #46977) -* Thu May 27 2004 ro(a)suse.de -- fix sigpause call (force use of sysv flavour) -* Fri Apr 02 2004 mls(a)suse.de -- fix utf-8 expansion, ls-F, prompt handling -* Mon Mar 29 2004 mls(a)suse.de -- fix utf-8 handling (really fixes #29983, #35486) -* Tue Mar 16 2004 werner(a)suse.de -- Do not forget the patch for bug #29983 even if not used -- Accept chinese in dspmbyte and map this on euc -* Wed Mar 10 2004 werner(a)suse.de -- Disable multibyte ix due problems on long lines (bug #35486) -- Simplify mv/cp complete -* Thu Mar 04 2004 werner(a)suse.de -- Fix mv/cp complete bug (#35339) -* Fri Feb 20 2004 werner(a)suse.de -- Add simple workaround for multibyte command lines (bug #29983) -* Wed Jan 28 2004 werner(a)suse.de -- Fix bug #34126: add runtime detection as fallback -* Sat Jan 10 2004 adrian(a)suse.de -- add %%defattr -* Fri Sep 19 2003 werner(a)suse.de -- Fix the fix for bug #29956: use a ringbuffer to avoid trouble - with recursive calls of UTF-8 convertes messges (bug #31335) -* Thu Sep 04 2003 werner(a)suse.de -- Corruption of cursor position is currently not fixable. - fix some other bugs. -* Wed Sep 03 2003 mfabian(a)suse.de -- Bugzilla #29956: convert all message catalogs to UTF-8 and - convert the strings returned by catgets from UTF-8 into the - encoding of the current locale. -- move Ukrainian message catalog into uk_UA subdirectory - instead of ru_UA.koi8u. -* Fri Jul 18 2003 werner(a)suse.de -- Fix multi byte initialization (bug #27793) -- Enable multi byte unset on LANG change -- Fix signess/unsigness mixtures -* Fri May 23 2003 coolo(a)suse.de -- use BuildRoot -* Wed May 14 2003 werner(a)suse.de -- Move pointer adress handling from int to intptr_t -* Thu Apr 17 2003 werner(a)suse.de -- Fix multibyte initialization -* Mon Feb 17 2003 werner(a)suse.de -- Fix bug #23681: don't reset full command line if an error occurs -* Mon Nov 11 2002 ro(a)suse.de -- use x-devel-packages in neededforbuild -* Tue Sep 17 2002 ro(a)suse.de -- removed bogus self-provides -* Wed Aug 07 2002 werner(a)suse.de -- Fix bindkey.tcsh for xterm and add some more keys (bug #15002) -* Tue Jul 30 2002 werner(a)suse.de -- Update to 6.12.00 -- Fix codesets of message cats -* Fri Jul 19 2002 mls(a)suse.de -- fix bindkey.tcsh to make it work with an unset $TERM variable -* Wed Mar 20 2002 werner(a)suse.de -- Fix bug # 15143: Unreadable /etc/printcap due paranoid SysAdmins - should not stop tcsh. -* Wed Dec 12 2001 werner(a)suse.de -- Revisit some complete expansion (mainly for mv, cp, make, and - man), sed error scanners should work for all languages. -* Thu Sep 06 2001 werner(a)suse.de -- Update to 6.11.00 due - * correct large file support - * Avoid core-dumping on very long $HOME variable - * Don't call qsort(3) with 0 items - * Fix redrawing in the recognize case - * MAXHOSTNAMELEN needs to be 256 (instead of 255) - * Big5 multibyte support - * Fix rmstar not to corrupt memory on off -* Wed May 16 2001 werner(a)suse.de -- Force large file support -* Wed May 09 2001 cstein(a)suse.de -- Corrected German spellings in nls/german/set6 -* Wed Mar 07 2001 werner(a)suse.de -- We use xmkmf therefore we need a full X environment at build -* Fri Feb 09 2001 werner(a)suse.de -- Don't use the authors (endless looping) security temp file - change but the mkstemp() function. -* Fri Feb 02 2001 mfabian(a)suse.de -- update to version 6.10.00 - (because the new version has support for display and editing of - multibyte characters) -- add patch to enable multibyte character editing -- patch to glob.c removed (included upstream) -- patch to sh.dir.c removed (included upstream) -- patch to tw.color.c removed (incuded upstream) -- last hunk of patch to tw.h removed (included upstream) -- bzip2 sources -* Fri Dec 15 2000 werner(a)suse.de -- Add missed hash for a comment. -* Wed Nov 22 2000 werner(a)suse.de -- Make /etc/profile.d/bindkey.tcsh knowing about TERM kvt and gnome -* Fri Nov 17 2000 kukuk(a)suse.de -- fix neededforbuild: textutil -> textutils -* Thu Nov 02 2000 werner(a)suse.de -- Use mkstemp for opening tmp files for `<<' redirects - - Use TMPDIR variable for location of tmp files - - Set group tag in spec -* Wed May 24 2000 uli(a)suse.de -- moved docs to %%{_docdir} -* Wed Jan 26 2000 werner(a)suse.de -- New version 6.09.00 - - /usr/man -> /usr/share/man - - Fix usage of catopen (MCLoadBySet isn't that what is used - internally within glibc, set it to MCLoadBySet) - - Avoid crahs due coloured ls-F - - Correct setpath NLS message -* Mon Sep 13 1999 bs(a)suse.de -- ran old prepare_spec on spec file to switch to new prepare_spec. -* Mon Jun 28 1999 werner(a)suse.de -- Source key binding and completion code from - /etc/csh.cshrc out into /etc/profile.d/bindkey.tcsh and - /etc/profile.d/complete.tcsh - - No newgrp builtin because its equivalent to exec newgrp -* Wed Jun 16 1999 ro(a)suse.de -- create localedirs before make install -* Fri Jun 11 1999 werner(a)suse.de -- New version - Fri Mar 12 14:21:46 MET 1999 - - Fix SIGSEGV caused different sizes of FILSIZ and BUFSIZE - - New version - - Restore missed MAXNAMLEN - - Make it alpha compile -* Thu Dec 03 1998 werner(a)suse.de -- Fix SIGSEGV with SYSMALOC - * alloc n+1 not n chunks - * set freed pointer to (ptr_t)NULL -* Wed Sep 16 1998 werner(a)suse.de -- Stupid error fixed -* Tue Sep 15 1998 werner(a)suse.de -- Security fix - - Avoid I/O trouble, use POSIX -* Wed Oct 22 1997 werner(a)suse.de -- Updatet FAQ.tcsh - - Better installation: remove old files before linking -* Thu Jan 02 1997 bs(a)suse.de - added FAQ.tcsh -* Thu Jan 02 1997 werner(a)suse.de -- Neue Version 6.07.02 mit einigen Fixes ++++++ tcsh-6.16.00-colorls.dif ++++++ --- tw.color.c +++ tw.color.c 2009-06-23 10:59:29.609901731 +0200 @@ -85,6 +85,11 @@ static Variable variables[] = { VAR(NOS, "tw", ""), /* Sticky and other writable dir (+t,o+w) */ VAR(NOS, "ow", ""), /* Other writable dir (o+w) but not sticky */ VAR(NOS, "st", ""), /* Sticky dir (+t) but not other writable */ + + VAR(NOS, "rs", ""), /* Reset */ + VAR(NOS, "ca", ""), /* Capability */ + VAR(NOS, "hl", ""), /* Hardlink */ + VAR(NOS, "cl", ""), /* CLRTOEOL */ }; enum FileType { ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

Jump to page: