Hello community,
here is the log from the commit of package yast2-trans-hu
checked in at Fri Jun 2 02:16:13 CEST 2006.
--------
--- yast2-trans-hu/yast2-trans-hu.changes 2006-05-29 13:09:14.000000000 +0200
+++ yast2-trans-hu/yast2-trans-hu.changes 2006-06-01 16:14:13.000000000 +0200
@@ -1,0 +2,5 @@
+Thu Jun 1 16:13:46 2006 - ke@suse.de
+
+- Update to version 2.13.28.
+
+------------------------------------------------------------------------
Old:
----
yast2-trans-hu-2.13.27.tar.bz2
New:
----
yast2-trans-hu-2.13.28.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ yast2-trans-hu.spec ++++++
--- /var/tmp/diff_new_pack.wMQ30b/_old 2006-06-02 02:16:07.000000000 +0200
+++ /var/tmp/diff_new_pack.wMQ30b/_new 2006-06-02 02:16:07.000000000 +0200
@@ -1,5 +1,5 @@
#
-# spec file for package yast2-trans-hu (Version 2.13.27)
+# spec file for package yast2-trans-hu (Version 2.13.28)
#
# Copyright (c) 2006 SUSE LINUX Products GmbH, Nuernberg, Germany.
# This file and all modifications and additions to the pristine
@@ -11,12 +11,12 @@
# norootforbuild
Name: yast2-trans-hu
-Version: 2.13.27
+Version: 2.13.28
Release: 1
License: GPL
Group: System/YaST
BuildRoot: %{_tmppath}/%{name}-%{version}-build
-Source0: yast2-trans-hu-2.13.27.tar.bz2
+Source0: yast2-trans-hu-2.13.28.tar.bz2
prefix: /usr
Provides: locale(yast2:hu)
BuildRequires: pkgconfig yast2-devtools
@@ -33,7 +33,7 @@
%prep
-%setup -n yast2-trans-hu-2.13.27
+%setup -n yast2-trans-hu-2.13.28
%build
autoreconf --force --install
@@ -65,6 +65,8 @@
/usr/share/YaST2/locale
%changelog -n yast2-trans-hu
+* Thu Jun 01 2006 - ke@suse.de
+- Update to version 2.13.28.
* Mon May 29 2006 - ke@suse.de
- Update to version 2.13.27.
* Wed May 24 2006 - ke@suse.de
++++++ yast2-trans-hu-2.13.27.tar.bz2 -> yast2-trans-hu-2.13.28.tar.bz2 ++++++
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-hu-2.13.27/VERSION new/yast2-trans-hu-2.13.28/VERSION
--- old/yast2-trans-hu-2.13.27/VERSION 2006-05-29 13:08:48.000000000 +0200
+++ new/yast2-trans-hu-2.13.28/VERSION 2006-06-01 16:13:46.000000000 +0200
@@ -1 +1 @@
-2.13.27
+2.13.28
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-hu-2.13.27/configure new/yast2-trans-hu-2.13.28/configure
--- old/yast2-trans-hu-2.13.27/configure 2006-05-29 13:08:54.000000000 +0200
+++ new/yast2-trans-hu-2.13.28/configure 2006-06-01 16:13:53.000000000 +0200
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59 for yast2-trans-hu 2.13.27.
+# Generated by GNU Autoconf 2.59 for yast2-trans-hu 2.13.28.
#
# Report bugs to http://bugs.opensuse.org/.
#
@@ -269,8 +269,8 @@
# Identity of this package.
PACKAGE_NAME='yast2-trans-hu'
PACKAGE_TARNAME='yast2-trans-hu'
-PACKAGE_VERSION='2.13.27'
-PACKAGE_STRING='yast2-trans-hu 2.13.27'
+PACKAGE_VERSION='2.13.28'
+PACKAGE_STRING='yast2-trans-hu 2.13.28'
PACKAGE_BUGREPORT='http://bugs.opensuse.org/'
ac_unique_file="RPMNAME"
@@ -728,7 +728,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures yast2-trans-hu 2.13.27 to adapt to many kinds of systems.
+\`configure' configures yast2-trans-hu 2.13.28 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -795,7 +795,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of yast2-trans-hu 2.13.27:";;
+ short | recursive ) echo "Configuration of yast2-trans-hu 2.13.28:";;
esac
cat <<\_ACEOF
@@ -910,7 +910,7 @@
test -n "$ac_init_help" && exit 0
if $ac_init_version; then
cat <<\_ACEOF
-yast2-trans-hu configure 2.13.27
+yast2-trans-hu configure 2.13.28
generated by GNU Autoconf 2.59
Copyright (C) 2003 Free Software Foundation, Inc.
@@ -924,7 +924,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by yast2-trans-hu $as_me 2.13.27, which was
+It was created by yast2-trans-hu $as_me 2.13.28, which was
generated by GNU Autoconf 2.59. Invocation command line was
$ $0 $@
@@ -1654,7 +1654,7 @@
# Define the identity of the package.
PACKAGE='yast2-trans-hu'
- VERSION='2.13.27'
+ VERSION='2.13.28'
cat >>confdefs.h <<_ACEOF
@@ -1865,7 +1865,7 @@
-VERSION="2.13.27"
+VERSION="2.13.28"
RPMNAME="yast2-trans-hu"
MAINTAINER="Karl Eichwalder "
@@ -2761,7 +2761,7 @@
} >&5
cat >&5 <<_CSEOF
-This file was extended by yast2-trans-hu $as_me 2.13.27, which was
+This file was extended by yast2-trans-hu $as_me 2.13.28, which was
generated by GNU Autoconf 2.59. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -2816,7 +2816,7 @@
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
-yast2-trans-hu config.status 2.13.27
+yast2-trans-hu config.status 2.13.28
configured by $0, generated by GNU Autoconf 2.59,
with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-hu-2.13.27/configure.in new/yast2-trans-hu-2.13.28/configure.in
--- old/yast2-trans-hu-2.13.27/configure.in 2006-05-29 13:08:51.000000000 +0200
+++ new/yast2-trans-hu-2.13.28/configure.in 2006-06-01 16:13:50.000000000 +0200
@@ -3,7 +3,7 @@
dnl -- This file is generated by y2autoconf 2.13.18 - DO NOT EDIT! --
dnl (edit configure.in.in instead)
-AC_INIT(yast2-trans-hu, 2.13.27, http://bugs.opensuse.org/, yast2-trans-hu)
+AC_INIT(yast2-trans-hu, 2.13.28, http://bugs.opensuse.org/, yast2-trans-hu)
dnl Check for presence of file 'RPMNAME'
AC_CONFIG_SRCDIR([RPMNAME])
@@ -17,7 +17,7 @@
AM_INIT_AUTOMAKE(tar-ustar) dnl searches for some needed programs
dnl Important YaST2 variables
-VERSION="2.13.27"
+VERSION="2.13.28"
RPMNAME="yast2-trans-hu"
MAINTAINER="Karl Eichwalder "
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-hu-2.13.27/po/ca-management.hu.po new/yast2-trans-hu-2.13.28/po/ca-management.hu.po
--- old/yast2-trans-hu-2.13.27/po/ca-management.hu.po 2006-05-29 11:29:02.000000000 +0200
+++ new/yast2-trans-hu-2.13.28/po/ca-management.hu.po 2006-06-01 16:07:10.000000000 +0200
@@ -18,10 +18,10 @@
msgstr ""
"Project-Id-Version: ca-management.hu\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2006-05-11 12:56+0200\n"
-"PO-Revision-Date: 2006-05-21 16:52+0200\n"
-"Last-Translator: Kéménczy Kálmán \n"
-"Language-Team: \n"
+"POT-Creation-Date: 2006-05-24 15:40+0200\n"
+"PO-Revision-Date: 2006-06-01 11:34+0200\n"
+"Last-Translator: Kéménczy Kálmán\n"
+"Language-Team: Hungarian \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
@@ -2150,3 +2150,15 @@
msgstr ""
"Az alapértelmezett tanúsítványt a CA kezelés\n"
"modulban is létre lehet hozni.\n"
+
+#: src/certDefault.ycp:56
+msgid "&Sub CA"
+msgstr "&Sub CA (alközpont)"
+
+#: src/certDefault.ycp:58
+msgid "&Client Certificate"
+msgstr "&Klienstanúsítvány"
+
+#: src/certDefault.ycp:60
+msgid "S&erver Certificate"
+msgstr "Ki&szolgálótanúsítvány"
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-hu-2.13.27/po/iscsi-client.hu.po new/yast2-trans-hu-2.13.28/po/iscsi-client.hu.po
--- old/yast2-trans-hu-2.13.27/po/iscsi-client.hu.po 2006-05-29 11:29:02.000000000 +0200
+++ new/yast2-trans-hu-2.13.28/po/iscsi-client.hu.po 2006-06-01 16:07:35.000000000 +0200
@@ -15,7 +15,7 @@
msgstr ""
"Project-Id-Version: iscsi-client.hu\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2006-05-11 12:59+0200\n"
+"POT-Creation-Date: 2006-06-01 13:47+0200\n"
"PO-Revision-Date: 2006-05-08 15:06+0200\n"
"Last-Translator: Kéménczy Kálmán \n"
"Language-Team: \n"
@@ -24,53 +24,53 @@
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.10.2\n"
-#: src/IscsiClient.ycp:226
+#: src/IscsiClient.ycp:259
#, ycp-format
msgid "<p>To configure the iSCSI initiator, the <b>%1</b> package must be installed.</p>"
msgstr "<p>Az iSCSI-kliens (initiator) beállításához szükség van a(z) <b>%1</b> csomag telepítésére.</p>"
-#: src/IscsiClient.ycp:227
+#: src/IscsiClient.ycp:260
msgid "<p>Install it now?</p>"
msgstr "<p>Telepíti most?</p>"
#. IscsiClient read dialog caption
-#: src/IscsiClient.ycp:333
+#: src/IscsiClient.ycp:366
msgid "Initializing iSCSI Initiator Configuration"
msgstr "Az iSCSI-kliens (initiator) beállításának inicializálása"
#. Progress stage 1/3
-#: src/IscsiClient.ycp:345
+#: src/IscsiClient.ycp:378
msgid "Read the database"
msgstr "Adatbázis beolvasása"
#. Progress stage 2/3
-#: src/IscsiClient.ycp:347
+#: src/IscsiClient.ycp:380
msgid "Read the previous settings"
msgstr "Előző beállítások beolvasása"
#. Progress stage 3/3
-#: src/IscsiClient.ycp:349
+#: src/IscsiClient.ycp:382
msgid "Detect the devices"
msgstr "Eszközök felismerése"
#. Progress step 1/3
-#: src/IscsiClient.ycp:352
+#: src/IscsiClient.ycp:385
msgid "Reading the database..."
msgstr "Az adatbázis olvasása..."
#. Progress step 2/3
-#: src/IscsiClient.ycp:354
+#: src/IscsiClient.ycp:387
msgid "Reading the previous settings..."
msgstr "Előző beállítások olvasása..."
#. Progress step 3/3
-#: src/IscsiClient.ycp:356
+#: src/IscsiClient.ycp:389
msgid "Detecting the devices..."
msgstr "Eszközök felismerése..."
# /usr/lib/YaST2/clients/lan_inetd_custom.ycp:801
#. Progress finished
-#: src/IscsiClient.ycp:358 src/IscsiClient.ycp:432
+#: src/IscsiClient.ycp:391 src/IscsiClient.ycp:465
msgid "Finished"
msgstr "Kész"
@@ -78,33 +78,33 @@
# modules/dialup/dialup.ycp:259
# menuentries/menuentry_lan_sendmail.ycp:14
#. IscsiClient read dialog caption
-#: src/IscsiClient.ycp:411
+#: src/IscsiClient.ycp:444
msgid "Saving iSCSI Initiator Configuration"
msgstr "iSCSI-kliens (initiator) beállításainak mentése"
#. Progress stage 1/2
-#: src/IscsiClient.ycp:423
+#: src/IscsiClient.ycp:456
msgid "Write the settings"
msgstr "Beállítások kiírása"
#. Progress stage 2/2
-#: src/IscsiClient.ycp:425
+#: src/IscsiClient.ycp:458
msgid "Run SuSEconfig"
msgstr "A SUSEconfig futtatása"
#. Progress step 1/2
-#: src/IscsiClient.ycp:428
+#: src/IscsiClient.ycp:461
msgid "Writing the settings..."
msgstr "Beállítások mentése..."
#. Progress step 2/2
-#: src/IscsiClient.ycp:430
+#: src/IscsiClient.ycp:463
msgid "Running SuSEconfig..."
msgstr "SUSEconfig futtatása..."
#. TODO FIXME: your code here...
#. Configuration summary text for autoyast
-#: src/IscsiClient.ycp:484
+#: src/IscsiClient.ycp:517
msgid "Configuration summary..."
msgstr "Beállítások összegzése ..."
@@ -417,47 +417,62 @@
msgid "&iSCSI Initiator"
msgstr "&iSCSI-kliens"
-#: src/widgets.ycp:66 src/widgets.ycp:78
+#: src/widgets.ycp:27
+#, fuzzy
+msgid "Command timed-out"
+msgstr ""
+"\n"
+"A parancs kimenete:"
+
+#: src/widgets.ycp:67 src/widgets.ycp:79
msgid "Insert the username."
msgstr "Adja meg a felhasználónevet"
# modules/inst_user.ycp:37
# modules/inst_user.ycp:53
-#: src/widgets.ycp:71 src/widgets.ycp:83
+#: src/widgets.ycp:72 src/widgets.ycp:84
msgid "Insert the password."
msgstr "Adja meg a jelszót"
-#: src/widgets.ycp:134
+# /usr/lib/YaST2/clients/lan_finish.ycp:248
+# /usr/lib/YaST2/clients/lan_finish.ycp:253
+# clients/lan_ypclient_write.ycp:56
+#: src/widgets.ycp:96
+#, fuzzy
+msgid "Error While Connecting iscsid"
+msgstr "Hiba történt az ypclient futtatásakor."
+
+#: src/widgets.ycp:135
msgid "Really log out from the selected target?"
msgstr "Valóban kilép a kiválasztott célról?"
-#: src/widgets.ycp:135
+#: src/widgets.ycp:136
msgid "Error occurred while logging out from the selected target."
msgstr "Hiba történt a kijelölt kiszolgálóról (target) való kilépés közben"
# clients/lan_ypclient_write.ycp:61
-#: src/widgets.ycp:140 src/widgets.ycp:159
+#: src/widgets.ycp:141 src/widgets.ycp:160
msgid "No record found."
msgstr "Nem találhatók rekordok."
# clients/lan_ISDN.ycp:1011 clients/lan_ISDN.ycp:1028
-#: src/widgets.ycp:235
+#: src/widgets.ycp:251
msgid "Insert the IP address."
msgstr "Adja meg az IP-címet"
-#: src/widgets.ycp:241
+#: src/widgets.ycp:257
msgid "Insert the port."
msgstr "Adja meg a portot"
-#: src/widgets.ycp:310 src/widgets.ycp:366
+#: src/widgets.ycp:326 src/widgets.ycp:382
msgid "True"
msgstr "Igaz"
-#: src/widgets.ycp:310 src/widgets.ycp:366
+#: src/widgets.ycp:326 src/widgets.ycp:382
msgid "False"
msgstr "Hamis"
-#: src/widgets.ycp:331 src/widgets.ycp:380
+#: src/widgets.ycp:347 src/widgets.ycp:396
msgid "The target is already connected."
msgstr "A kiszolgáló (target) már csatlakoztatva van"
@@ -473,16 +488,12 @@
msgid "Initializing..."
msgstr "A modul indítása ..."
-#. Error message
-#: src/IscsiClient.ycp:417
-msgid "Cannot write settings."
-msgstr "A beállítások mentése nem sikerült!"
-
-#: src/helps.ycp:91
-msgid "<p>When accessing a iSCSI-device <b>READ</b>/<b>WRITE</b>please make sure that this access is exclusive. Otherwise the potential risk of data corruption is there.</p>\n"
-msgstr "<p>Az iSCSI eszköz elérésekor <b>READ</b>/<b>WRITE</b>győzödjön meg arról, hogy a megadott elérés kizárolagos. Ellenkező esetben, nagy az adatvesztés kockázata.</p>\n"
+#~ msgid "Cannot write settings."
+#~ msgstr "A beállítások mentése nem sikerült!"
+
+#~ msgid "<p>When accessing a iSCSI-device <b>READ</b>/<b>WRITE</b>please make sure that this access is exclusive. Otherwise the potential risk of data corruption is there.</p>\n"
+#~ msgstr "<p>Az iSCSI eszköz elérésekor <b>READ</b>/<b>WRITE</b>győzödjön meg arról, hogy a megadott elérés kizárolagos. Ellenkező esetben, nagy az adatvesztés kockázata.</p>\n"
# clients/lan_ypclient_write.ycp:61
-#: src/widgets.ycp:131 src/widgets.ycp:143
-msgid "No record found"
-msgstr "Nem találhatók rekordok"
+#~ msgid "No record found"
+#~ msgstr "Nem találhatók rekordok"
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-hu-2.13.27/po/iscsi-server.hu.po new/yast2-trans-hu-2.13.28/po/iscsi-server.hu.po
--- old/yast2-trans-hu-2.13.27/po/iscsi-server.hu.po 2006-05-29 11:29:02.000000000 +0200
+++ new/yast2-trans-hu-2.13.28/po/iscsi-server.hu.po 2006-06-01 16:07:36.000000000 +0200
@@ -8,114 +8,115 @@
# Steve Varadi , 2000.
# Zoltán Levárdy , 1999.
# Kalman Kemenczy , 2006.
+# Kéménczy Kálmán, 2006.
#
msgid ""
msgstr ""
"Project-Id-Version: iscsi-server.hu\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2006-05-11 12:59+0200\n"
-"PO-Revision-Date: 2006-04-20 01:02+0100\n"
-"Last-Translator: Szabolcs Varga \n"
-"Language-Team: Hungarian \n"
+"POT-Creation-Date: 2006-05-24 15:44+0200\n"
+"PO-Revision-Date: 2006-06-01 11:38+0200\n"
+"Last-Translator: Kéménczy Kálmán\n"
+"Language-Team: Hungarian \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.10.2\n"
-#: src/IscsiServer.ycp:127
+#: src/IscsiServer.ycp:131
#, ycp-format
msgid "<p>To configure the iSCSI target, the <b>%1</b> package must be installed.</p>"
msgstr "<p>Az iSCSI-kiszolgáló (target) beállításához szükség van a(z) <b>%1</b> csomag telepítésére.</p>"
-#: src/IscsiServer.ycp:128
+#: src/IscsiServer.ycp:132
msgid "<p>Install it now?</p>"
msgstr "<p>Telepíti most?</p>"
-#: src/IscsiServer.ycp:159
+#: src/IscsiServer.ycp:173
msgid "If changes have been made, the iSCSI target is not able \n"
msgstr "Amennyiben elmenti a változásokat, az iSCSI-kiszolgáló (target) nem lesz elérhető \n"
#. IscsiServer read dialog caption
-#: src/IscsiServer.ycp:234
+#: src/IscsiServer.ycp:252
msgid "Initializing iSCSI Target Configuration"
msgstr "iSCSI-kiszolgáló (target) beállításának indítása"
#. Progress stage 1/3
-#: src/IscsiServer.ycp:246
+#: src/IscsiServer.ycp:264
msgid "Read the database"
msgstr "Adatbázis beolvasása"
#. Progress stage 2/3
-#: src/IscsiServer.ycp:248
+#: src/IscsiServer.ycp:266
msgid "Read the previous settings"
msgstr "Előző beállítások beolvasása"
#. Progress stage 3/3
-#: src/IscsiServer.ycp:250
+#: src/IscsiServer.ycp:268
msgid "Detect the devices"
msgstr "Eszközök felismerése"
#. Progress step 1/3
-#: src/IscsiServer.ycp:253
+#: src/IscsiServer.ycp:271
msgid "Reading the database..."
msgstr "Az adatbázis olvasása..."
#. Progress step 2/3
-#: src/IscsiServer.ycp:255
+#: src/IscsiServer.ycp:273
msgid "Reading the previous settings..."
msgstr "Előző beállítások olvasása..."
#. Progress step 3/3
-#: src/IscsiServer.ycp:257
+#: src/IscsiServer.ycp:275
msgid "Detecting the devices..."
msgstr "Eszközök felismerése..."
# /usr/lib/YaST2/clients/lan_inetd_custom.ycp:801
#. Progress finished
-#: src/IscsiServer.ycp:259 src/IscsiServer.ycp:335
+#: src/IscsiServer.ycp:277 src/IscsiServer.ycp:353
msgid "Finished"
msgstr "Kész"
#. IscsiServer write dialog caption
-#: src/IscsiServer.ycp:314
+#: src/IscsiServer.ycp:332
msgid "Saving iSCSI Target Configuration"
msgstr "iSCSI-kiszolgáló (target) beállításainak mentése"
#. Progress stage 1/2
-#: src/IscsiServer.ycp:326
+#: src/IscsiServer.ycp:344
msgid "Write the settings"
msgstr "Beállítások kiírása"
#. Progress stage 2/2
-#: src/IscsiServer.ycp:328
+#: src/IscsiServer.ycp:346
msgid "Run SuSEconfig"
msgstr "A SUSEconfig futtatása"
#. Progress step 1/2
-#: src/IscsiServer.ycp:331
+#: src/IscsiServer.ycp:349
msgid "Writing the settings..."
msgstr "Beállítások mentése..."
#. Progress step 2/2
-#: src/IscsiServer.ycp:333
+#: src/IscsiServer.ycp:351
msgid "Running SuSEconfig..."
msgstr "SUSEconfig futtatása..."
#. write configuration (/etc/ietd.conf)
-#: src/IscsiServer.ycp:347
+#: src/IscsiServer.ycp:365
msgid "Cannot write settings."
msgstr "Nem sikerült elmenteni a beállításokat!"
-#: src/IscsiServer.ycp:481
+#: src/IscsiServer.ycp:501
msgid "Configuration summary..."
msgstr "Beállítások összegzése ..."
-#: src/IscsiServer.ycp:483 src/dialogs.ycp:54
+#: src/IscsiServer.ycp:503 src/dialogs.ycp:54
msgid "Global"
msgstr "Globális"
#. part of help text, used to describe radiobuttons (matching starting iscsitarget service but without "&")
-#: src/IscsiServer.ycp:484 src/dialogs.ycp:107
+#: src/IscsiServer.ycp:504 src/dialogs.ycp:107
msgid "When Booting"
msgstr "Rendszerindításkor"
@@ -123,32 +124,32 @@
# modules/dialup/dialup.ycp:411
# clients/lan_ISDN.ycp:909
#. part of help text, used to describe radiobuttons (matching starting iscsitarget service but without "&")
-#: src/IscsiServer.ycp:485 src/dialogs.ycp:109
+#: src/IscsiServer.ycp:505 src/dialogs.ycp:109
msgid "Manually"
msgstr "Kézzel"
# modules/inst_sw_single.ycp:63
# clients/inst_sw_single.ycp:118
-#: src/IscsiServer.ycp:486 src/IscsiServer.ycp:496 src/dialogs.ycp:124
+#: src/IscsiServer.ycp:506 src/IscsiServer.ycp:516 src/dialogs.ycp:124
#: src/dialogs.ycp:202
msgid "No Authentication"
msgstr "Nincs hitelesítés"
# modules/inst_sw_single.ycp:63
# clients/inst_sw_single.ycp:118
-#: src/IscsiServer.ycp:488 src/IscsiServer.ycp:498 src/dialogs.ycp:126
+#: src/IscsiServer.ycp:508 src/IscsiServer.ycp:518 src/dialogs.ycp:126
#: src/dialogs.ycp:204
msgid "Incoming Authentication"
msgstr "Bejövő hitelesítés"
# modules/inst_sw_single.ycp:63
# clients/inst_sw_single.ycp:118
-#: src/IscsiServer.ycp:489 src/IscsiServer.ycp:499 src/dialogs.ycp:141
+#: src/IscsiServer.ycp:509 src/IscsiServer.ycp:519 src/dialogs.ycp:141
#: src/dialogs.ycp:219
msgid "Outgoing Authentication"
msgstr "Kimenő hitelesítés"
-#: src/IscsiServer.ycp:491 src/dialogs.ycp:74 src/dialogs.ycp:160
+#: src/IscsiServer.ycp:511 src/dialogs.ycp:74 src/dialogs.ycp:160
msgid "Targets"
msgstr "Kiszolgálók"
@@ -407,31 +408,31 @@
msgstr "Mégsem"
#. add a new item
-#: src/widgets.ycp:111
+#: src/widgets.ycp:112
msgid "Really delete this item?"
msgstr "Valóban törli ezt az elemet?"
-#: src/widgets.ycp:185
+#: src/widgets.ycp:193
msgid "Cannot use the same secret for incoming and outgoing authentication."
msgstr "Ugyanaz a titkos adat nem használható bejövő és kimenő hitelesítéshez is."
-#: src/widgets.ycp:225
+#: src/widgets.ycp:233
msgid "The target cannot be empty."
msgstr "A kiszolgáló (target) értéke nem lehet üres."
-#: src/widgets.ycp:226
+#: src/widgets.ycp:234
msgid "The target already exists."
msgstr "A kiszolgáló (target) már létezik."
-#: src/widgets.ycp:230
+#: src/widgets.ycp:238
msgid "The logical unit definition cannot be empty."
msgstr "A logikaiegység-meghatározás nem lehet üres."
-#: src/widgets.ycp:231
+#: src/widgets.ycp:239
msgid "The logical unit already exists."
msgstr "A logikai egység már létezik."
-#: src/widgets.ycp:299
+#: src/widgets.ycp:307
msgid "Really delete the selected item?"
msgstr "Valóban törli a kiválasztott elemet?"
@@ -446,3 +447,15 @@
#: src/wizards.ycp:112
msgid "Initializing..."
msgstr "A modul indítása ..."
+
+#. ask user whether reload or restart server
+#: src/IscsiServer.ycp:172
+msgid ""
+"If changes have been made, the iSCSI target is not able\n"
+"to reload current configuration. It can only restart.\n"
+"When restarting, all sessions are aborted.\n"
+"Restart the iscsitarget service?\n"
+msgstr ""
+"Változás esetén az iSCSI-kiszolgáló nem képes\n"
+"újratölteni, csak újraindítani a jelenlegi konfigurációt\n"
+"Újraindítás során az összes munkafolyamat megszakad.\\ Újra kívánja indítani az iscsitarget szolgáltatást?\n"
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-hu-2.13.27/po/status.txt new/yast2-trans-hu-2.13.28/po/status.txt
--- old/yast2-trans-hu-2.13.27/po/status.txt 2006-05-29 11:37:21.000000000 +0200
+++ new/yast2-trans-hu-2.13.28/po/status.txt 2006-06-01 16:08:48.000000000 +0200
@@ -1,6 +1,6 @@
-Translated : 16045
-Fuzzy : 0
+Translated : 16046
+Fuzzy : 2
Untranslated : 0
--------------------
- All strings : 16045
+ All strings : 16048
100 % are translated
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-trans-hu-2.13.27/po/yast2-apparmor.hu.po new/yast2-trans-hu-2.13.28/po/yast2-apparmor.hu.po
--- old/yast2-trans-hu-2.13.27/po/yast2-apparmor.hu.po 2006-05-29 11:29:02.000000000 +0200
+++ new/yast2-trans-hu-2.13.28/po/yast2-apparmor.hu.po 2006-06-01 16:08:45.000000000 +0200
@@ -1,22 +1,25 @@
+# translation of yast2-apparmor.po to
# translation of yast2-apparmor.hu.po to Hungarian
# Hungarian message File YaST2 (@memory@).
# Copyright (C) 2005 SUSE Linux Products GmbH.
# Copyright (C) 2002 SuSE Linux AG.
# Copyright (C) 2000, 2001 SuSE GmbH.
+# Kéménczy Kálmán, 2006.
# Marcel Hilzinger , 2001.
# Sári Gábor , 2000.
# Steve Varadi , 2000.
# Zoltán Levárdy , 1999.
# Kalman Kemenczy , 2006.
+# Kéménczy Kálmán, 2006.
#
msgid ""
msgstr ""
-"Project-Id-Version: yast2-apparmor.hu\n"
+"Project-Id-Version: yast2-apparmor\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2006-05-11 13:11+0200\n"
-"PO-Revision-Date: 2006-05-21 01:04+0100\n"
-"Last-Translator: Szabolcs Varga \n"
-"Language-Team: Hungarian \n"
+"PO-Revision-Date: 2006-06-01 13:57+0200\n"
+"Last-Translator: Kéménczy Kálmán\n"
+"Language-Team: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
@@ -159,7 +162,7 @@
#: profile_dialogs.ycp:168
msgid "AppArmor profile for "
-msgstr "AppArmor profil ehhez"
+msgstr "AppArmor profil ehhez:"
#: profile_dialogs.ycp:177
msgid "File Name"
@@ -1182,7 +1185,7 @@
#: sd-config.ycp:259 sd-config.ycp:272 sd-config.ycp:285
msgid "Frequency"
-msgstr "Frekvencia"
+msgstr "Gyakoriság"
# /usr/lib/YaST2/clients/lan_address.ycp:84
# clients/lan_address.ycp:140 clients/lan_complex.ycp:521 clients/lan_complex.ycp:684
@@ -1192,7 +1195,7 @@
#: sd-config.ycp:264 sd-config.ycp:277 sd-config.ycp:290
msgid "Include Unknown Severity Events"
-msgstr "Ismeretlen súlyosságú események szerepeltetése"
+msgstr "Ismeretlen súlyosságú események hozzáadása"
# modules/inst_mouse.ycp:81
# modules/inst_mouse.ycp:74
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remember to have fun...
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-commit-unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit-help@opensuse.org