Mailinglist Archive: opensuse-buildservice (182 mails)

< Previous Next >
Re: [opensuse-buildservice] OBS DoS caused by a broken package
  • From: Lubos Lunak <l.lunak@xxxxxxx>
  • Date: Wed, 10 Feb 2010 09:03:46 +0100
  • Message-id: <201002100903.46194.l.lunak@xxxxxxx>
On Monday 01 of February 2010, Adrian Schröter wrote:
Am Sonntag, 31. Januar 2010 23:53:59 schrieb Lubos Lunak:
I think this is a consequence of the recent fix that retries builds that
failed because of the build host itself instead of the package. Would it
be possible to adjust it so that such failed builds are put at the end of
the queue instead of being handled again right away?

No, that makes not really sense, because it either is a bad host, than it
should not affect the priority. Or it is one and the server should give up.

But I will add some support that the dispatcher is giving up after 3 tries
with "bad host".

There appears to be a problem with this. Currently the OBS is again spinning
a few packages in devel:languages:perl. It randomly switches between
broken1.txt and broken2.txt . Notice in the second log the following:

No buildstatus set, packager broke either the base system (glibc/bash) or the
build host has a problem, server will retry...
acheSession.spec ...
init_buildsystem --repository
zypp:// /.build-srcdir/perl-MasonX-Request-WithApacheSession.spec build
rpmlint-Factory ...

--
Lubos Lunak
openSUSE Boosters team, KDE developer
l.lunak@xxxxxxx , l.lunak@xxxxxxx
Using BUILD_ROOT=/abuild/root_1/.mount
Using BUILD_ARCH=i586:i486:i386
Doing xen build in /dev/abuild/1_root


build10 started "build perl-MasonX-Request-WithApacheSession.spec" at Wed Feb
10 07:48:21 UTC 2010.

Building perl-MasonX-Request-WithApacheSession for project
'devel:languages:perl' repository 'SLE_10' arch 'i586' srcmd5
'8b42ef4eded4637839747e8e111841a8'

processing specfile
/abuild/root_1/.build-srcdir/perl-MasonX-Request-WithApacheSession.spec ...
running changelog2spec --target rpm --file
/abuild/root_1/.build-srcdir/perl-MasonX-Request-WithApacheSession.spec
init_buildsystem --prepare --clean --rpmlist /abuild/root_1/.build.rpmlist
/abuild/root_1/.build-srcdir/perl-MasonX-Request-WithApacheSession.spec build
rpmlint-Factory ...
preinstalling aaa_base...
preinstalling acl...
preinstalling attr...
preinstalling bash...
preinstalling bzip2...
preinstalling coreutils...
preinstalling db...
preinstalling diffutils...
preinstalling filesystem...
preinstalling fillup...
preinstalling glibc...
preinstalling grep...
preinstalling insserv...
preinstalling libacl...
preinstalling libattr...
preinstalling libgcc...
preinstalling libnscd...
preinstalling libxcrypt...
preinstalling m4...
preinstalling ncurses...
preinstalling pam...
preinstalling permissions...
preinstalling popt...
preinstalling pwdutils...
preinstalling readline...
preinstalling rpm...
preinstalling sed...
preinstalling tar...
preinstalling zlib...
preinstalling util-linux...
preinstalling perl...
copying packages...
reordering...cycle: perl-libwww-perl -> perl-HTML-Parser
breaking dependency perl-libwww-perl -> perl-HTML-Parser
cycle: perl-YAML -> perl-Test-Base
breaking dependency perl-Test-Base -> perl-YAML
cycle: apache2 -> apache2-prefork
breaking dependency apache2-prefork -> apache2
done
booting XEN kernel ...
linux64 xm create -c /var/run/bsworker_1/build/xen.conf name=build:1_root
memory=750 disk=phy:/dev/abuild/1_root,hda1,w
disk=phy:/dev/abuild/1_swap,hda2,w extra=quiet init=/.build/build panic=1
console=ttyS0
Using config file "/var/run/bsworker_1/build/xen.conf".
Started domain build:1_root
PCI: Fatal: No config space access function found
i8042.c: No controller found.
doing fast boot
FATAL: Module ext4 not found.
Creating device nodes with udev
Boot logging started on /dev/xvc0(/dev/console) at Wed Feb 10 07:48:38 2010
Waiting for device /dev/hda1 to appear: ok
fsck 1.41.1 (01-Sep-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/hda1
/dev/hda1: clean, 5825/1024000 files, 153715/4096000 blocks
fsck succeeded. Mounting root device read-only.
Mounting root /dev/hda1
mount -o ro,defaults -t ext3 /dev/hda1 /root
mount: can't find /root/proc in /etc/fstab or /etc/mtab
/.build/build: line 548: perl: command not found
/.build/build: line 548: perl: command not found
2nd stage started in virtual machine
machine type: x86_64
switching personality to 134217736...
/.build/build: line 442: exec: perl: not found
Kernel panic - not syncing: Attempted to kill init!
No buildstatus set, packager broke either the base system (glibc/bash) or the
build host has a problem, server will retry...
Using BUILD_ROOT=/abuild/root_2/.mount
Using BUILD_ARCH=i586:i486:i386
Doing xen build in /dev/abuild/2_root


build19 started "build perl-MasonX-Request-WithApacheSession.spec" at Wed Feb
10 07:49:09 UTC 2010.

Building perl-MasonX-Request-WithApacheSession for project
'devel:languages:perl' repository 'SLE_10' arch 'i586' srcmd5
'8b42ef4eded4637839747e8e111841a8'

processing specfile
/abuild/root_2/.build-srcdir/perl-MasonX-Request-WithApacheSession.spec ...
running changelog2spec --target rpm --file
/abuild/root_2/.build-srcdir/perl-MasonX-Request-WithApacheSession.spec
init_buildsystem --prepare --clean --rpmlist /abuild/root_2/.build.rpmlist
/abuild/root_2/.build-srcdir/perl-MasonX-Request-WithApacheSession.spec build
rpmlint-Factory ...
preinstalling aaa_base...
preinstalling acl...
preinstalling attr...
preinstalling bash...
preinstalling bzip2...
preinstalling coreutils...
preinstalling db...
preinstalling diffutils...
preinstalling filesystem...
preinstalling fillup...
preinstalling glibc...
preinstalling grep...
preinstalling insserv...
preinstalling libacl...
preinstalling libattr...
preinstalling libgcc...
preinstalling libnscd...
preinstalling libxcrypt...
preinstalling m4...
preinstalling ncurses...
preinstalling pam...
preinstalling permissions...
preinstalling popt...
preinstalling pwdutils...
preinstalling readline...
preinstalling rpm...
preinstalling sed...
preinstalling tar...
preinstalling zlib...
preinstalling util-linux...
preinstalling perl...
copying packages...
reordering...cycle: perl-libwww-perl -> perl-HTML-Parser
breaking dependency perl-libwww-perl -> perl-HTML-Parser
cycle: perl-YAML -> perl-Test-Base
breaking dependency perl-Test-Base -> perl-YAML
cycle: apache2 -> apache2-prefork
breaking dependency apache2-prefork -> apache2
done
booting XEN kernel ...
linux64 xm create -c /var/run/bsworker_2/build/xen.conf name=build:2_root
memory=750 disk=phy:/dev/abuild/2_root,hda1,w
disk=phy:/dev/abuild/2_swap,hda2,w extra=quiet init=/.build/build panic=1
console=ttyS0
Using config file "/var/run/bsworker_2/build/xen.conf".
Started domain build:2_root
FATAL: Module ext4 not found.
Creating device nodes with udev
Boot logging started on /dev/xvc0(/dev/console) at Wed Feb 10 07:49:25 2010
Waiting for device /dev/hda1 to appear: ok
fsck 1.41.1 (01-Sep-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/hda1
/dev/hda1: clean, 5825/1024000 files, 153715/4096000 blocks
fsck succeeded. Mounting root device read-only.
Mounting root /dev/hda1
mount -o ro,defaults -t ext3 /dev/hda1 /root
mount: can't find /root/proc in /etc/fstab or /etc/mtab
/.build/build: line 548: perl: command not found
/.build/build: line 548: perl: command not found
2nd stage started in virtual machine
machine type: x86_64
switching personality to 134217736...
/.build/build: line 442: exec: perl: not found
Kernel panic - not syncing: Attempted to kill init!
No buildstatus set, packager broke either the base system (glibc/bash) or the
build host has a problem, server will retry...
acheSession.spec ...
init_buildsystem --repository zypp://
/.build-srcdir/perl-MasonX-Request-WithApacheSession.spec build rpmlint-Factory
...
running aaa_base preinstall script
running aaa_base postinstall script
Updating etc/sysconfig/language...
Updating etc/sysconfig/backup...
Updating etc/sysconfig/boot...
Updating etc/sysconfig/displaymanager...
Updating etc/sysconfig/kernel...
Updating etc/sysconfig/suseconfig...
Updating etc/sysconfig/clock...
Updating etc/sysconfig/proxy...
Updating etc/sysconfig/windowmanager...
Updating etc/sysconfig/sysctl...
Updating etc/sysconfig/mail...
Updating etc/sysconfig/cron...
Updating etc/sysconfig/news...
Updating etc/sysconfig/shutdown...
Updating etc/sysconfig/sw_management...
Updating etc/passwd...unchanged
Updating etc/group...unchanged
Updating etc/shadow...new
initializing rpm db...
installing filesystem-10-1.12
installing perl-macros-1.0-6.1
installing glibc-2.4-31.30
warning: /etc/bindresvport.blacklist created as
/etc/bindresvport.blacklist.rpmnew
warning: /etc/default/nss created as /etc/default/nss.rpmnew
warning: /etc/nsswitch.conf created as /etc/nsswitch.conf.rpmnew
warning: /etc/rpc created as /etc/rpc.rpmnew
installing audit-libs-1.2.9-6.9
installing expat-2.0.0-13.2
installing gdbm-1.8.3-243.2
installing glibc-locale-2.4-31.30
installing libapr1-1.2.2-13.2
installing libattr-2.4.34-0.7
installing libgcc-4.1.2_20070115-0.11
installing libmudflap-4.1.2_20070115-0.11
installing libnscd-1.1-16.4.1
installing libxcrypt-2.4-12.2
installing mktemp-1.5-744.2
installing ncurses-5.5-18.11
installing net-tools-1.60-583.4
installing patch-2.5.9-160.2
installing popt-1.7-271.19
installing rcs-5.7-879.2
installing zlib-1.2.3-15.2
installing zlib-devel-1.2.3-15.2
installing attr-2.4.34-0.7
installing file-4.16-15.9
installing libacl-2.2.41-0.7
installing libstdc++-4.1.2_20070115-0.11
installing ncurses-devel-5.5-18.11
installing readline-5.1-24.13
installing acl-2.2.41-0.7
installing bash-3.1-24.14
installing db-4.3.29-15.2
installing pcre-6.4-14.2
installing bzip2-1.0.3-17.2
installing cpp-4.1.2_20070115-0.11
installing cracklib-2.8.6-14.2
installing insserv-1.04.0-20.13
installing libcom_err-1.38-25.21
installing libzio-0.1-17.2
installing module-init-tools-3.2.2-32.27
installing tcpd-7.6-731.2
installing timezone-2.4-31.30
WARNING: Not updating /etc/localtime with new zone file
installing unzip-5.52-16.2
installing less-394-14.2
installing pam-0.99.6.3-28.8
warning: /etc/environment created as /etc/environment.rpmnew
warning: /etc/pam.d/common-account created as /etc/pam.d/common-account.rpmnew
warning: /etc/pam.d/common-auth created as /etc/pam.d/common-auth.rpmnew
warning: /etc/pam.d/common-password created as /etc/pam.d/common-password.rpmnew
warning: /etc/pam.d/common-session created as /etc/pam.d/common-session.rpmnew
warning: /etc/pam.d/other created as /etc/pam.d/other.rpmnew
warning: /etc/securetty created as /etc/securetty.rpmnew
warning: /etc/security/access.conf created as /etc/security/access.conf.rpmnew
warning: /etc/security/group.conf created as /etc/security/group.conf.rpmnew
warning: /etc/security/limits.conf created as /etc/security/limits.conf.rpmnew
warning: /etc/security/pam_env.conf created as /etc/security/pam_env.conf.rpmnew
warning: /etc/security/time.conf created as /etc/security/time.conf.rpmnew
installing info-4.8-22.2
installing binutils-2.16.91.0.5-23.20
installing cpio-2.6-19.12
installing diffutils-2.8.7-17.14
installing fillup-1.42-118.2
installing findutils-4.2.27-14.10
installing gawk-3.1.5-18.2
installing gdbm-devel-1.8.3-243.2
installing grep-2.5.1a-20.11
installing gzip-1.3.5-159.5
installing libtool-1.5.22-13.12
installing m4-1.4.4-12.2
installing make-3.80-202.2
installing sed-4.1.4-17.11
installing tar-1.15.1-23.5
installing e2fsprogs-1.38-25.21
installing pam-modules-10-2.11
installing gettext-0.14.5-13.2
installing coreutils-5.93-22.14
warning: /etc/default/su created as /etc/default/su.rpmnew
installing sysvinit-2.86-21.15
telinit: timeout opening/writing control channel /dev/initctl
installing bison-2.1-13.2
installing flex-2.5.31-18.4
installing libgssapi-0.6-13.4.1
installing klogd-1.4.1-559.12
installing psmisc-22.1-14.2
installing cyrus-sasl-2.1.21-18.4
installing perl-5.8.8-14.2
Updating etc/sysconfig/suseconfig...
installing procps-3.2.6-18.7
installing gpm-1.20.1-322.2
Updating etc/sysconfig/mouse...
installing perl-Class-Data-Inheritable-0.08-101.1
installing perl-Devel-StackTrace-1.20-3.13
installing perl-Error-0.17016-6.1
installing perl-ExtUtils-ParseXS-2.15-12.4
installing perl-HTML-Tagset-3.20-91.1
installing perl-IO-Compress-Base-2.015-2.10
installing perl-IO-String-1.08-273.1
installing perl-IO-Zlib-1.09-2.12
installing perl-Module-Info-0.30-12.4
installing perl-Net-Daemon-0.43-159.1
installing perl-Package-Constants-0.02-3.1
installing perl-Spiffy-0.30-227.1
installing perl-Test-Tester-0.107-10.1
installing perl-Tie-IxHash-1.21-1447.1
installing perl-URI-1.52-5.1
installing build-2007.05.10-0.3
installing perl-Algorithm-Diff-1.1902-256.1
installing perl-Compress-Raw-Bzip2-2.015-2.10
installing perl-Compress-Raw-Zlib-2.015-2.10
installing perl-Digest-SHA1-2.12-8.1
installing perl-Params-Validate-0.91-54.1
installing strace-4.5.14-15.2
installing automake-1.9.6-13.2
installing openssl-0.9.8a-18.15
installing procinfo-18-55.12
installing autoconf-2.59-92.2
installing glibc-devel-2.4-31.30
installing cvs-1.12.12-19.2
installing texinfo-4.8-22.5
installing vim-6.4.6-19.4
installing groff-1.18.1.1-29.2
Updating etc/sysconfig/suseconfig...
installing aaa_base-10-12.26
warning: /etc/DIR_COLORS created as /etc/DIR_COLORS.rpmnew
warning: /etc/inittab created as /etc/inittab.rpmnew
warning: /root/.exrc created as /root/.exrc.rpmnew
Updating etc/sysconfig/language...
Updating etc/sysconfig/backup...
Updating etc/sysconfig/boot...
Updating etc/sysconfig/displaymanager...
Updating etc/sysconfig/kernel...
Updating etc/sysconfig/suseconfig...
Updating etc/sysconfig/clock...
Updating etc/sysconfig/proxy...
Updating etc/sysconfig/windowmanager...
Updating etc/sysconfig/sysctl...
Updating etc/sysconfig/mail...
Updating etc/sysconfig/cron...
Updating etc/sysconfig/news...
Updating etc/sysconfig/shutdown...
Updating etc/sysconfig/sw_management...
Updating etc/passwd...unchanged
Updating etc/group...unchanged
Updating etc/shadow...unchanged
installing perl-Class-Container-0.12-4.6
installing perl-PlRPC-0.2020-6.1
installing perl-Test-NoWarnings-0.084-11.1
installing perl-Text-Diff-1.37-6.1
installing bind-libs-9.3.4-1.8
installing netcfg-10-1.2
warning: /etc/HOSTNAME created as /etc/HOSTNAME.rpmnew
installing openldap2-client-2.3.32-0.10
installing perl-Cache-Cache-1.06-1.13
installing perl-Exception-Class-1.29-2.14
installing perl-IO-Compress-Bzip2-2.015-2.9
installing perl-IO-Compress-Zlib-2.015-2.8
installing permissions-2007.2.15-0.7
Updating etc/sysconfig/security...
installing gcc-4.1.2_20070115-0.11
installing gettext-devel-0.14.5-13.2
installing man-2.4.1-237.6
Updating etc/sysconfig/cron...
installing perl-DBI-1.609-8.6
installing perl-Test-Deep-0.106-5.3
installing perl-Compress-Zlib-2.015-2.8
installing bind-utils-9.3.4-1.8
installing libapr-util1-1.2.2-13.2
installing pwdutils-3.0.7.1-17.24
warning: /etc/default/passwd created as /etc/default/passwd.rpmnew
warning: /etc/default/useradd created as /etc/default/useradd.rpmnew
warning: /etc/ldap.conf created as /etc/ldap.conf.rpmnew
warning: /etc/pwdutils/logging created as /etc/pwdutils/logging.rpmnew
warning: /etc/rpasswd.conf created as /etc/rpasswd.conf.rpmnew
warning: /usr/sbin/groupadd.local created as /usr/sbin/groupadd.local.rpmnew
warning: /usr/sbin/useradd.local created as /usr/sbin/useradd.local.rpmnew
warning: /usr/sbin/userdel-post.local created as
/usr/sbin/userdel-post.local.rpmnew
warning: /usr/sbin/userdel-pre.local created as
/usr/sbin/userdel-pre.local.rpmnew
installing rpm-4.4.2-43.19
Updating etc/sysconfig/services...
installing util-linux-2.12r-35.22
warning: /etc/fdprm created as /etc/fdprm.rpmnew
warning: /etc/raw created as /etc/raw.rpmnew
installing perl-Archive-Tar-1.52-4.15
installing perl-libwww-perl-5.834-3.3
installing apache2-prefork-2.2.3-16.9
installing perl-HTML-Parser-3.64-5.1
installing perl-Test-Base-0.59-2.8
installing apache2-2.2.3-16.9
Updating etc/sysconfig/apache2...
looking for old 2.0 modules to be renamed...
Done.
installing perl-YAML-0.70-5.1
installing perl-HTML-Mason-1.37-11.25
installing apache2-mod_perl-2.0.4-82.5
installing perl-Apache-Session-1.87-8.5
installing perl-Module-Build-0.2611-14.4
installing perl-Apache-Session-Wrapper-0.33-2.71
removing nis flags from //etc/nsswitch.conf...
now finalizing build dir...
Checking permissions and ownerships - using the permissions files
/tmp/Check.perms.hQ1985
setting /dev/full to root:root 0622. (wrong permissions 0666)
setting /usr/src/packages/SOURCES/ to root:root 1777. (wrong permissions 0755)
setting /usr/src/packages/BUILD/ to root:root 1777. (wrong permissions 0755)
setting /usr/src/packages/RPMS/ to root:root 1777. (wrong permissions 0755)
setting /usr/src/packages/RPMS/athlon/ to root:root 1777. (wrong permissions
0755)
setting /usr/src/packages/RPMS/i386/ to root:root 1777. (wrong permissions 0755)
setting /usr/src/packages/RPMS/i486/ to root:root 1777. (wrong permissions 0755)
setting /usr/src/packages/RPMS/i586/ to root:root 1777. (wrong permissions 0755)
setting /usr/src/packages/RPMS/i686/ to root:root 1777. (wrong permissions 0755)
setting /usr/src/packages/RPMS/noarch/ to root:root 1777. (wrong permissions
0755)
setting /usr/src/packages/SPECS/ to root:root 1777. (wrong permissions 0755)
setting /usr/src/packages/SRPMS/ to root:root 1777. (wrong permissions 0755)
setting /usr/bin/wall to root:tty 2755. (wrong permissions 0755)
setting /usr/bin/write to root:tty 2755. (wrong permissions 0755)
setting /usr/sbin/suexec2 to root:root 4755. (wrong permissions 0755)
Starting SuSEconfig, the SuSE Configuration Tool...
Running in full featured mode.
Reading /etc/sysconfig and updating the system...
Executing /sbin/conf.d/SuSEconfig.automake...
Executing /sbin/conf.d/SuSEconfig.groff...
Executing /sbin/conf.d/SuSEconfig.news...
Installing new /etc/nntpserver
Executing /sbin/conf.d/SuSEconfig.perl...
Executing /sbin/conf.d/SuSEconfig.permissions...
Executing /sbin/conf.d/SuSEconfig.sortpasswd...
Executing /sbin/conf.d/SuSEconfig.zmessages...
Finished.
-----------------------------------------------------------------
I have the following modifications for
perl-MasonX-Request-WithApacheSession.spec:
4c4
< Release: 1
---
Release: 7.26
-----------------------------------------------------------------
----- building perl-MasonX-Request-WithApacheSession.spec (user abuild)
-----------------------------------------------------------------
-----------------------------------------------------------------
+ exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --define 'disturl
obs://build.opensuse.org/devel:languages:perl/SLE_10/8b42ef4eded4637839747e8e111841a8-perl-MasonX-Request-WithApacheSession'
/usr/src/packages/SOURCES/perl-MasonX-Request-WithApacheSession.spec
error: cannot open Pubkeys index using db3 - No such file or directory (2)
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.34940
+ umask 022
+ cd /usr/src/packages/BUILD
+ cd /usr/src/packages/BUILD
+ rm -rf MasonX-Request-WithApacheSession-0.30
+ /usr/bin/bzip2 -dc
/usr/src/packages/SOURCES/MasonX-Request-WithApacheSession-0.30.tar.bz2
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd MasonX-Request-WithApacheSession-0.30
++ /usr/bin/id -u
+ '[' 399 = 0 ']'
++ /usr/bin/id -u
+ '[' 399 = 0 ']'
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.34940
+ umask 022
+ cd /usr/src/packages/BUILD
+ /bin/rm -rf /var/tmp/perl-MasonX-Request-WithApacheSession-root
++ dirname /var/tmp/perl-MasonX-Request-WithApacheSession-root
+ /bin/mkdir -p /var/tmp
+ /bin/mkdir /var/tmp/perl-MasonX-Request-WithApacheSession-root
+ cd MasonX-Request-WithApacheSession-0.30
+ perl Makefile.PL 'OPTIMIZE=-march=i586 -mtune=i686 -fmessage-length=0
-D_FORTIFY_SOURCE=2 -O2 -Wall'
# running Build.PL config=optimize=-march=i586 -mtune=i686 -fmessage-length=0
-D_FORTIFY_SOURCE=2 -O2 -Wall
/usr/bin/perl Build.PL config=optimize=-march=i586 -mtune=i686
-fmessage-length=0 -D_FORTIFY_SOURCE=2 -O2 -Wall
Checking whether your kit is complete...
Looks good
Creating new 'Build' script for 'MasonX-Request-WithApacheSession' version
'0.30'
+ make
/usr/bin/perl Build --makefile_env_macros 1
lib/MasonX/Request/WithApacheSession.pm ->
blib/lib/MasonX/Request/WithApacheSession.pm
lib/MasonX/Request/WithMultiSession.pm ->
blib/lib/MasonX/Request/WithMultiSession.pm
Manifying blib/lib/MasonX/Request/WithApacheSession.pm ->
blib/libdoc/MasonX::Request::WithApacheSession.3pm
Manifying blib/lib/MasonX/Request/WithMultiSession.pm ->
blib/libdoc/MasonX::Request::WithMultiSession.3pm
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.34940
+ umask 022
+ cd /usr/src/packages/BUILD
+ cd MasonX-Request-WithApacheSession-0.30
+ make DESTDIR=/var/tmp/perl-MasonX-Request-WithApacheSession-root install
/usr/bin/perl Build --makefile_env_macros 1 install
Warning: You do not have permissions to install into
/usr/lib/perl5/site_perl/5.8.8 at /usr/lib/perl5/5.8.8/ExtUtils/Install.pm line
114.
mkdir /usr/lib/perl5/site_perl/5.8.8/MasonX: Permission denied at
/usr/lib/perl5/5.8.8/ExtUtils/Install.pm line 176
make: *** [install] Error 13
error: Bad exit status from /var/tmp/rpm-tmp.34940 (%install)


RPM build errors:
cannot open Pubkeys index using db3 - No such file or directory (2)
Bad exit status from /var/tmp/rpm-tmp.34940 (%install)
mount: / is busy
System halted.
< Previous Next >
List Navigation
Follow Ups
References