http://bugzilla.opensuse.org/show_bug.cgi?id=1168148
http://bugzilla.opensuse.org/show_bug.cgi?id=1168148#c1
--- Comment #1 from Looper Nagic ---
When I turn it off (Fn+F7), reboot and open Yast > HWInfo, the touchpad is
detected and starts working after I turn it on (Fn+F7).
And it's not working again after reboot, so I have to do the steps said above
to have a working touchpad.
Also, my BIOS does not have touchpad settings.
--------------
---Results when the touchpad is working---
Name@Name:~> xinput list
No protocol specified
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ ELAN0504:01 04F3:3091 Touchpad id=14 [slave pointer (2)]
⎜ ↳ Logitech USB Optical Mouse id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Acer Wireless Radio Control id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Video Bus id=9 [slave keyboard (3)]
↳ Power Button id=10 [slave keyboard (3)]
↳ Sleep Button id=11 [slave keyboard (3)]
↳ HD WebCam: HD WebCam id=12 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=15 [slave keyboard (3)]
↳ Acer WMI hotkeys id=16 [slave keyboard (3)]
Name@Name:~> sudo hwinfo --mouse
44: USB 00.0: 10503 USB Mouse
[Created at usb.122]
Unique ID: mZxt.K4UT_RFWZ+0
Parent ID: uIhY.DIk+WevO348
SysFS ID: /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-2/3-2:1.0
SysFS BusID: 3-2:1.0
Hardware Class: mouse
Model: "Logitech M90/M100 Optical Mouse"
Hotplug: USB
Vendor: usb 0x046d "Logitech, Inc."
Device: usb 0xc05a "M90/M100 Optical Mouse"
Revision: "54.00"
Compatible to: int 0x0210 0x0048
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/mice (/dev/input/mouse1)
Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event4,
/dev/input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse,
/dev/input/by-path/pci-0000:04:00.4-usb-0:2:1.0-event-mouse,
/dev/input/by-id/usb-Logitech_USB_Optical_Mouse-mouse,
/dev/input/by-path/pci-0000:04:00.4-usb-0:2:1.0-mouse
Device Number: char 13:63 (char 13:33)
Speed: 1.5 Mbps
Module Alias: "usb:v046DpC05Ad5400dc00dsc00dp00ic03isc01ip02in00"
Driver Info #0:
Buttons: 8
Wheels: 4
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #39 (Hub)
48: PS/2 00.0: 10500 PS/2 Mouse
[Created at input.249]
Unique ID: AH6Q.n1Y2kY4ZMhB
Hardware Class: mouse
Model: "ELAN0504:01 04F3:3091 Touchpad"
Vendor: 0x04f3
Device: 0x3091 "ELAN0504:01 04F3:3091 Touchpad"
Compatible to: int 0x0210 0x0001
Device File: /dev/input/mice (/dev/input/mouse0)
Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event3,
/dev/input/by-path/platform-AMDI0010:01-event-mouse,
/dev/input/by-path/platform-AMDI0010:01-mouse
Device Number: char 13:63 (char 13:32)
Driver Info #0:
Buttons: 1
Wheels: 0
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=no, avail=yes, need=no, active=unknown
--------------
---Shown in Yast > HWInfo (touchpad is working)---
⏵Mouse
⏵M90/M100 Optical Mouse (/dev/input/mice)
⏷ELAN0504:01 04F3:3091 Touchpad (/dev/input/mice)
⎹⏤Bus: PS/2
⎹⏤Class (spec): PS/2 mouse
⎹⏤Class: Mouse
⎹⏤Device Identifier: 12433
⎹⏤Device Name: /dev/input/mice
⏷Device Names
⎹⏤/dev/input/mice
⎹⏤/dev/input/mouse0
⎹⏤/dev/input/event3
⎹⏤/dev/input/by-path/platform-AMDI0010:01-event-mouse
⎹⏤/dev/input/by-path/platform-AMDI0010:01-mouse
⏷Device Numbers
⎹⏤Major: 13
⎹⏤Minor: 63
⎹⏤Range: 1
⎹⏤Type: c
⎹⏤Device: ELAN0504:01 04F3:3091 Touchpad
⎹⏤Hwcfg Bus: ps2
⎹⏤Model: ELAN0504:01 04F3:3091 Touchpad
⏷Mouse
⎹⏤buttons: 1
⎹⏤gpm: exps2
⎹⏤xf86: explorerps/2
⎹⏤Old Unique Key: UYj6.fK0kTiP5gYA
⎹⏤Unique Key: AHQ.n1Y2kY4ZMhB
⎹⏤Vendor Identifier: 1267
⎹⏤dev_name2: /dev/input/mouse0
--
You are receiving this mail because:
You are on the CC list for the bug.