http://bugzilla.opensuse.org/show_bug.cgi?id=1089543 Bug ID: 1089543 Summary: asus m2npv-vm nvidia based gfx chipset, segfault in nouveau_dri.so, kde desktop doesnt load Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.3 Hardware: x86-64 OS: Other Status: NEW Severity: Major Priority: P5 - None Component: Kernel Assignee: kernel-maintainers@forge.provo.novell.com Reporter: abittner@opensuse.org QA Contact: qa-bugs@suse.de Found By: --- Blocker: --- see my other leap 15.0 beta bug at #boo1089366 I tried to setup a clean leap 42.3 iso from usb key, complete fresh install on this asus m2npv-vm mainboard, with onboard nvidia chipset + gfx leap 42.3 was installed with active network connection during install, configured online repositories so it immediately applied the rpm patches and updates that are current at the moment. logon screen is fine, I can enter username and password, then it shows suse lightbulb and circle animation, eventually lightbulb vanishes and black screen appears with that thing on the upper left corner, thats all, no start menu no task bar nor clock nor symbols or anything else. alt+f2 for starting up stuff works/shows up, and I was able to start a Konsole and firefox. screen shows artefacts and lose triangles and similar stuff. dragging around the Konsole and firefox seems somewhat speedy though, so some part of the graphics layers, drivers, acceleration or however linux graphic stack works, seems to do its job to some extent I would say as a layman. dmesg output at the end: [Apr13 17:05] nouveau 0000:00:05.0: plasmashell[3023]: fail ttm_validate [ +0.000007] nouveau 0000:00:05.0: plasmashell[3023]: validating bo list [ +0.000015] nouveau 0000:00:05.0: plasmashell[3023]: validate: -12 [ +1.683860] plasmashell[3023]: segfault at 0 ip 00007fbcef66d926 sp 00007ffd57042af0 error 4 in nouveau_dri.so[7fbcef1d0000+951000] Linux linux-d6ka 4.4.120-45-default #1 SMP Wed Mar 14 20:51:49 UTC 2018 (623211f) x86_64 x86_64 x86_64 GNU/Linux nouveau 1691648 7 video 40960 1 nouveau mxm_wmi 16384 1 nouveau wmi 16384 2 mxm_wmi,nouveau i2c_algo_bit 16384 1 nouveau drm_kms_helper 167936 1 nouveau ttm 110592 1 nouveau drm 397312 10 ttm,drm_kms_helper,nouveau button 16384 1 nouveau xf86-video-nouveau-1.0.15-1.3.x86_64 libdrm_nouveau2-2.4.76-1.2.x86_64 Mesa-dri-nouveau-17.0.5-176.1.x86_64 libvdpau_nouveau-17.0.5-176.1.x86_64 kernel-default-4.4.120-45.1.x86_64 kernel-firmware-20170530-17.1.noarch drm-kmp-default-4.9.33_k4.4.114_42-7.1.x86_64 drm-kmp-default-4.9.33_k4.4.114_42-7.1.x86_64 libdrm_intel1-2.4.76-1.2.x86_64 libdrm_nouveau2-2.4.76-1.2.x86_64 libva-drm1-1.7.3-1.3.x86_64 libdrm2-2.4.76-1.2.x86_64 libdrm_amdgpu1-2.4.76-1.2.x86_64 libdrm_radeon1-2.4.76-1.2.x86_64 libxcb-dri2-0-1.11.1-9.1.x86_64 xorg-x11-driver-video-7.6_1-18.1.x86_64 Mesa-dri-nouveau-17.0.5-176.1.x86_64 libreoffice-base-drivers-mysql-5.4.5.1-15.1.x86_64 xorg-x11-driver-input-7.6_1-17.1.noarch libxcb-dri3-0-1.11.1-9.1.x86_64 vaapi-dummy-driver-1.7.3-1.3.x86_64 ----- 00:05.0 VGA compatible controller: NVIDIA Corporation C51PV [GeForce 6150] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16 Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fb000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at cbf00000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nouveau Kernel modules: nouveau hwinfo --framebuffer 02: None 00.0: 11001 VESA Framebuffer [Created at bios.459] Unique ID: rdCR.3ZgfiMTjlp1 Hardware Class: framebuffer Model: "NVIDIA Crush50 Board - c51pv0" Vendor: "NVIDIA Corporation" Device: "Crush50 Board - c51pv0" SubVendor: "NVIDIA" SubDevice: Revision: "Chip Rev" Memory Size: 64 MB Memory Range: 0x00000000-0x03ffffff (rw) Mode 0x0300: 640x400 (+640), 8 bits Mode 0x0301: 640x480 (+640), 8 bits Mode 0x0303: 800x600 (+800), 8 bits Mode 0x0305: 1024x768 (+1024), 8 bits Mode 0x0307: 1280x1024 (+1280), 8 bits Mode 0x030e: 320x200 (+640), 16 bits Mode 0x030f: 320x200 (+1280), 24 bits Mode 0x0311: 640x480 (+1280), 16 bits Mode 0x0312: 640x480 (+2560), 24 bits Mode 0x0314: 800x600 (+1600), 16 bits Mode 0x0315: 800x600 (+3200), 24 bits Mode 0x0317: 1024x768 (+2048), 16 bits Mode 0x0318: 1024x768 (+4096), 24 bits Mode 0x031a: 1280x1024 (+2560), 16 bits Mode 0x031b: 1280x1024 (+5120), 24 bits Mode 0x0330: 320x200 (+320), 8 bits Mode 0x0331: 320x400 (+320), 8 bits Mode 0x0332: 320x400 (+640), 16 bits Mode 0x0333: 320x400 (+1280), 24 bits Mode 0x0334: 320x240 (+320), 8 bits Mode 0x0335: 320x240 (+640), 16 bits Mode 0x0336: 320x240 (+1280), 24 bits Mode 0x033d: 640x400 (+1280), 16 bits Mode 0x033e: 640x400 (+2560), 24 bits Mode 0x0345: 1600x1200 (+1600), 8 bits Mode 0x0346: 1600x1200 (+3200), 16 bits Mode 0x0347: 1400x1050 (+1400), 8 bits Mode 0x0348: 1400x1050 (+2800), 16 bits Mode 0x0352: 2048x1536 (+8192), 24 bits Config Status: cfg=new, avail=yes, need=no, active=unknown hwinfo --gfxcard 16: PCI 05.0: 0300 VGA compatible controller (VGA) [Created at pci.378] Unique ID: CvwD.IEmWI2YYL+D SysFS ID: /devices/pci0000:00/0000:00:05.0 SysFS BusID: 0000:00:05.0 Hardware Class: graphics card Model: "ASUSTeK A8N-VM CSM" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x0240 "GeForce 6150" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x81cd "A8N-VM CSM" Revision: 0xa2 Driver: "nouveau" Driver Modules: "drm" Memory Range: 0xfc000000-0xfcffffff (rw,non-prefetchable) Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable) Memory Range: 0xfb000000-0xfbffffff (rw,non-prefetchable) Memory Range: 0xcbf00000-0xcbf1ffff (ro,non-prefetchable,disabled) IRQ: 16 (15966 events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v000010DEd00000240sv00001043sd000081CDbc03sc00i00" Driver Info #0: XFree86 v4 Server Module: nv Driver Info #1: XFree86 v4 Server Module: nvidia 3D Support: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Primary display adapter: #16 ----- dmesg -e | grep -i nouv [ +0.000014] nouveau: loading module not compiled with retpoline compiler. [ +0.000004] fb: switching to nouveaufb from VESA VGA [ +0.000918] nouveau 0000:00:05.0: NVIDIA C51 (04e000a2) [ +0.009559] nouveau 0000:00:05.0: bios: version 05.51.22.33.07 [ +0.008488] nouveau 0000:00:05.0: fb: 64 MiB of unknown memory type [ +0.000027] nouveau 0000:00:05.0: DRM: VRAM: 61 MiB [ +0.000004] nouveau 0000:00:05.0: DRM: GART: 512 MiB [ +0.000006] nouveau 0000:00:05.0: DRM: TMDS table version 1.1 [ +0.000003] nouveau 0000:00:05.0: DRM: DCB version 3.0 [ +0.000003] nouveau 0000:00:05.0: DRM: DCB outp 00: 02000300 00000023 [ +0.000004] nouveau 0000:00:05.0: DRM: DCB outp 01: 03011312 00000000 [ +0.000003] nouveau 0000:00:05.0: DRM: DCB outp 02: 020023f1 0040c080 [ +0.000003] nouveau 0000:00:05.0: DRM: DCB conn 00: 0000 [ +0.000003] nouveau 0000:00:05.0: DRM: DCB conn 01: 0131 [ +0.000002] nouveau 0000:00:05.0: DRM: DCB conn 02: 0210 [ +0.000003] nouveau 0000:00:05.0: DRM: DCB conn 03: 0211 [ +0.000003] nouveau 0000:00:05.0: DRM: DCB conn 04: 0213 [ +0.002252] nouveau 0000:00:05.0: DRM: MM: using M2MF for buffer copies [ +0.000014] nouveau 0000:00:05.0: DRM: Setting dpms mode 3 on TV encoder (output 2) [ +0.012628] nouveau 0000:00:05.0: DRM: allocated 1680x1050 fb: 0x9000, bo ffff88022161a800 [ +0.002413] fbcon: nouveaufb (fb0) is primary device [ +0.002466] nouveau 0000:00:05.0: fb0: nouveaufb frame buffer device [ +0.019762] [drm] Initialized nouveau 1.3.1 20120801 for 0000:00:05.0 on minor 0 [Apr13 17:05] nouveau 0000:00:05.0: plasmashell[3023]: fail ttm_validate [ +0.000007] nouveau 0000:00:05.0: plasmashell[3023]: validating bo list [ +0.000015] nouveau 0000:00:05.0: plasmashell[3023]: validate: -12 [ +1.683860] plasmashell[3023]: segfault at 0 ip 00007fbcef66d926 sp 00007ffd57042af0 error 4 in nouveau_dri.so[7fbcef1d0000+951000] dmesg -e | grep -i vga [ +0.000323] vgaarb: setting as boot device: PCI:0000:00:05.0 [ +0.000000] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none [ +0.000000] vgaarb: loaded [ +0.000000] vgaarb: bridge control possible 0000:00:05.0 [ +0.088587] fb0: VESA VGA frame buffer device [ +0.000004] fb: switching to nouveaufb from VESA VGA -- You are receiving this mail because: You are on the CC list for the bug.