http://bugzilla.suse.com/show_bug.cgi?id=939456 http://bugzilla.suse.com/show_bug.cgi?id=939456#c52 H. Zeng <zhx@cnzhx.net> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags| |needinfo?(snwint@suse.com) --- Comment #52 from H. Zeng <zhx@cnzhx.net> --- Created attachment 725418 --> http://bugzilla.suse.com/attachment.cgi?id=725418&action=edit 'ls -l' in the EFI/BOOT/ directory on the Rufus created stick Here is the output of 'ls -l' in the EFI/BOOT/ directory on the Rufus created stick. I'll report back later about the create ISO from this USB stick then `dd` this ISO to the USB stick for booting and installing because I need your help on the following operations. How to mount the USB stick (assuming it's /dev/sdX with one partition /dev/sdX1) to /mnt? Here is what I have done, ``` a:/data # umount /dev/sdb1 a:/data # mount /dev/sdb /mnt mount: wrong fs type, bad option, bad superblock on /dev/sdb, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so. a:/data # mount /dev/sdb1 /mnt a:/data # ``` As you can see, I cannot mount /dev/sdb but /dev/sdb1. Should I mount sdb1 instead of /dev/sdb? Sorry, I am not an experienced user of Linux. I'm on the learning route. P.S. I might need to do this tomorrow after I receive your further instructions. -- You are receiving this mail because: You are on the CC list for the bug.