https://bugzilla.novell.com/show_bug.cgi?id=720919
https://bugzilla.novell.com/show_bug.cgi?id=720919#c11
Per Jessen changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |REOPENED
InfoProvider|per@opensuse.org |
--- Comment #11 from Per Jessen 2012-01-05 08:11:42 UTC ---
An update - yesterday evening, I started seeing CPU hardware errors (machine
checks), so we had the system board replaced. The system still only uses md0
for booting from, but now at least I get an md1 and md2 at bootup. Probably
just a coincidence.
kzinti:~ # mdadm --examine /dev/md0
/dev/md0:
MBR Magic : aa55
kzinti:~ # mdadm --examine /dev/md1
mdadm: No md superblock detected on /dev/md1.
kzinti:~ # mdadm --examine /dev/md2
mdadm: No md superblock detected on /dev/md2.
# cat /etc/mdadm.conf
DEVICE containers partitions
ARRAY /dev/md0 UUID=9e4b6d12:ba620e07:776c2c25:004bd7b2
ARRAY /dev/md/1 metadata=1.2 UUID=ed3f2d50:68312fbe:575bfc02:58733cd8
name=kzinti:1
ARRAY /dev/md/2 metadata=1.2 UUID=1e51ddd4:d53438ab:9367c94e:25a15b0f
name=kzinti:2
I uncommented the last two lines when I was trying to figure out what was going
on, but leaving them in does not seem to make a difference.
mdadm.conf from initrd:
AUTO -all
ARRAY /dev/md0 metadata=0.90 UUID=9e4b6d12:ba620e07:776c2c25:004bd7b2
# cat /proc/mdstat
Personalities : [raid1] [raid0] [raid10] [raid6] [raid5] [raid4]
md1 : active (auto-read-only) raid1 sdb2[1] sda2[0]
4199961 blocks super 1.2 [2/2] [UU]
md2 : active (auto-read-only) raid1 sdb3[1] sda3[0]
467393950 blocks super 1.2 [2/2] [UU]
resync=PENDING
md0 : active raid1 sdb1[1] sda1[0]
16787776 blocks [2/2] [UU]
What is (perhaps) also odd - md2 is an LVM PV:
# pvdisplay
--- Physical volume ---
PV Name /dev/md2
VG Name kzinti
PV Size 445.74 GiB / not usable 3.40 MiB
Allocatable yes
PE Size 4.00 MiB
Total PE 114109
Free PE 62909
Allocated PE 51200
PV UUID 7Jfzm9-ZjIy-9r3k-SaJI-NwkH-ZQpc-GKtUQX
It has just one LV for the time being:
# lvdisplay
--- Logical volume ---
LV Name /dev/kzinti/opensuse
VG Name kzinti
LV UUID DmQXRk-wCu5-2jtk-soZ2-2rmg-AX6W-e8VWsM
LV Write Access read/write
LV Status NOT available
LV Size 200.00 GiB
Current LE 51200
Segments 1
Allocation inherit
Read ahead sectors auto
"LV Status NOT available" is the odd bit - I can easily activate it myself
with "vgchange -a y", but that should happen automatically at boot-up.
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
