Mailinglist Archive: opensuse-bugs (3543 mails)

< Previous Next >
[Bug 717848] New: [NetApp CQ212497] SLES11SP2 Beta 5: NULL pointer dereference kernel panic after failover trigger
  • From: bugzilla_noreply@xxxxxxxxxx
  • Date: Wed, 14 Sep 2011 16:07:28 +0000
  • Message-id: <bug-717848-21960@http.bugzilla.novell.com/>

https://bugzilla.novell.com/show_bug.cgi?id=717848

https://bugzilla.novell.com/show_bug.cgi?id=717848#c0


Summary: [NetApp CQ212497] SLES11SP2 Beta 5: NULL pointer
dereference kernel panic after failover trigger
Classification: openSUSE
Product: openSUSE 11.2
Version: Final
Platform: x86-64
OS/Version: openSUSE 11.2
Status: NEW
Severity: Normal
Priority: P5 - None
Component: Kernel
AssignedTo: kernel-maintainers@xxxxxxxxxxxxxxxxxxxxxx
ReportedBy: sean.stewart@xxxxxxxxxx
QAContact: qa@xxxxxxx
Found By: ---
Blocker: ---


User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/535.1 (KHTML,
like Gecko) Chrome/13.0.782.220 Safari/535.1

After pulling a fibre channel cable, the HBA timeout of 10 seconds is reached,
failover occurs, and then the host hits a kernel panic when DMMP appears to try
to send an I/O to a device that has already been removed.

Reproducible: Always

Steps to Reproduce:
1. Map LUNs to a SLES 11 SP 2 host and run I/O
2. Pull a host side cable
Actual Results:
The host panics after DMMP appears to attempt to send an I/O to a device that
has already been removed.

Expected Results:
Device removal and failover should occur without a panic.

Panic trace:

[ 1541.803614] BUG: unable to handle kernel NULL pointer dereference at
0000000000000028
[ 1541.811463] IP: [<ffffffff8120c917>] elv_drain_elevator+0x17/0x60
[ 1541.817567] PGD 1ef6ea067 PUD 1c58ff067 PMD 0
[ 1541.822059] Oops: 0000 [#1] SMP
[ 1541.825319] CPU 0
[ 1541.827158] Modules linked in: raw edd nfs lockd fscache auth_rpcgss nfs_acl
sunrpc dm_round_robin dm_multipath af_packet rdma_ut
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.4-0.11-default (geeko@buildhost) (gcc version
4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) )
[ 0.000000] Command line: root=/dev/disk/by-id/scsi-35000c5000be9890b-part2
load_ramdisk=1 dd insmod=bcm5700 insmod=e1000 resumeK
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000100 - 000000000009c000 (usable)
[ 0.000000] BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007d730000 (usable)
[ 0.000000] BIOS-e820: 000000007d730000 - 000000007d7e0000 (reserved)
[ 0.000000] BIOS-e820: 000000007d7e0000 - 000000007f68f000 (usable)
[ 0.000000] BIOS-e820: 000000007f68f000 - 000000007f6df000 (reserved)
[ 0.000000] BIOS-e820: 000000007f6df000 - 000000007f7df000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f7df000 - 000000007f7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f7ff000 - 000000007f800000 (usable)
[ 0.000000] BIOS-e820: 000000007f800000 - 0000000090000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000200000000 (usable)
[ 0.000000] last_pfn = 0x200000 max_arch_pfn = 0x400000000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] user-defined physical RAM map:
[ 0.000000] user: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] user: 000000002f0a0000 - 0000000036ffb000 (usable)
[ 0.000000] user: 000000007f6df000 - 000000007f7ff000 (ACPI data)
[ 0.000000] DMI 2.5 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x36ffb max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff88000009c140] 9c140
[ 0.000000] init_memory_mapping: 0000000000000000-0000000036ffb000
[ 0.000000] RAMDISK: 366b7000 - 36fef000
[ 0.000000] ACPI: RSDP 00000000000fdfd0 00024 (v02 IBM )
[ 0.000000] ACPI: XSDT 000000007f7fe120 00074 (v01 IBM THURLEY 00000000
01000013)
[ 0.000000] ACPI: FACP 000000007f7fb000 000F4 (v04 IBM THURLEY 00000000
IBM 01000013)
[ 0.000000] ACPI Warning: Invalid length for Pm1aControlBlock: 32, using
default 16 (20110413/tbfadt-610)
[ 0.000000] ACPI: DSDT 000000007f7f8000 02885 (v01 IBM THURLEY 00000003
IBM 01000013)
[ 0.000000] ACPI: FACS 000000007f735000 00040
[ 0.000000] ACPI: TCPA 000000007f7fd000 00064 (v00 00000000
00000000)
[ 0.000000] ACPI: APIC 000000007f7f7000 000DE (v02 IBM THURLEY 00000000
IBM 01000013)
[ 0.000000] ACPI: MCFG 000000007f7f6000 0003C (v01 IBM THURLEY 00000001
IBM 01000013)
[ 0.000000] ACPI: SLIC 000000007f7f5000 00176 (v01 IBM THURLEY 00000000
IBM 01000013)
[ 0.000000] ACPI: HPET 000000007f7f4000 00038 (v01 IBM THURLEY 00000001
IBM 01000013)
[ 0.000000] ACPI: SSDT 000000007f7f3000 00113 (v02 IBM CPUSCOPE 00004000
IBM 01000013)
[ 0.000000] ACPI: SSDT 000000007f7f2000 00A14 (v02 IBM PSTATEPM 00004000
IBM 01000013)
[ 0.000000] ACPI: ERST 000000007f7f1000 00230 (v01 IBM THURLEY 00000001
IBM 01000013)
[ 0.000000] ACPI: DMAR 000000007f7f0000 00088 (v01 IBM THURLEY 00000001
IBM 01000013)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000036ffb000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000036ffb000
[ 0.000000] NODE_DATA [0000000036690000 - 00000000366b6fff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x0002f0a0 -> 0x00036ffb
[ 0.000000] ACPI: PM-Timer IO Port: 0x588
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x11] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x13] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x15] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
000000002f0a0000
[ 0.000000] Allocating PCI resources starting at 7f7ff000 (gap:
7f7ff000:80801000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:16 nr_cpu_ids:16
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880036400000 s74496 r8192
d23808 u131072
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 29658
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line:
root=/dev/disk/by-id/scsi-35000c5000be9890b-part2 load_ramdisk=1 dd
insmod=bcm5700 insmod=e1000K
[ 0.000000] Misrouted IRQ fixup and polling support enabled
[ 0.000000] This may significantly impact system performance
[ 0.000000] PID hash table entries: 512 (order: 0, 4096 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 96244k/901100k available (4255k kernel code, 770112k
absent, 34744k reserved, 7885k data, 1348k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:262400 nr_irqs:1216 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Spurious LAPIC timer interrupt on cpu 0
[ 0.000000] do_IRQ: 0.186 No irq handler for vector (irq -1)
[ 0.000000] do_IRQ: 0.147 No irq handler for vector (irq -1)
[ 0.000000] do_IRQ: 0.98 No irq handler for vector (irq -1)
[ 0.000000] do_IRQ: 0.91 No irq handler for vector (irq -1)
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 3145728 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.004000] Fast TSC calibration using PIT
[ 0.008000] Detected 2266.805 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer
frequency.. 4533.61 BogoMIPS (lpj=9067220)
[ 0.010613] pid_max: default: 32768 minimum: 301
[ 0.015386] Security Framework initialized
[ 0.019497] AppArmor: AppArmor initialized
[ 0.023628] Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.030620] Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.037349] Mount-cache hash table entries: 256
[ 0.042005] Initializing cgroup subsys cpuacct
[ 0.046450] Initializing cgroup subsys memory
[ 0.050815] Initializing cgroup subsys devices
[ 0.055256] Initializing cgroup subsys freezer
[ 0.059696] Initializing cgroup subsys net_cls
[ 0.064137] Initializing cgroup subsys blkio
[ 0.068406] Initializing cgroup subsys perf_event
[ 0.073149] CPU: Physical Processor ID: 0
[ 0.077156] CPU: Processor Core ID: 0
[ 0.080820] mce: CPU supports 9 MCE banks
[ 0.084837] using mwait in idle threads.
[ 0.088787] SMP alternatives: switching to UP code
[ 0.097633] ACPI: Core revision 20110413
[ 0.103187] DMAR: Host address width 40
[ 0.107023] DMAR: DRHD base: 0x000000fe710000 flags: 0x1
[ 0.112333] IOMMU 0: reg_base_addr fe710000 ver 1:0 cap c90780106f0462 ecap
f020fe
[ 0.119889] DMAR: ATSR flags: 0x0
[ 0.123202] DMAR: No RMRR found
[ 0.126443] IOAPIC id 9 under DRHD base 0xfe710000 IOMMU 0
[ 0.132000] IOAPIC id 8 under DRHD base 0xfe710000 IOMMU 0
[ 0.137685] Enabled Interrupt-remapping
[ 0.141521] Switched APIC routing to physical flat.
[ 0.146856] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.192467] CPU0: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
[ 0.304367] Performance Events: PEBS fmt1+, erratum AAJ80 worked around,
Nehalem events, Broken BIOS detected, complain to your .
[ 0.317361] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 186
is 53003c)
[ 0.325341] Intel PMU driver.
[ 0.328302] ... version: 3
[ 0.332302] ... bit width: 48
[ 0.336391] ... generic registers: 4
[ 0.340391] ... value mask: 0000ffffffffffff
[ 0.345690] ... max period: 000000007fffffff
[ 0.350990] ... fixed-purpose events: 3
[ 0.354990] ... event mask: 000000070000000f
[ 0.360499] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.366074] Brought up 1 CPUs
[ 0.369038] Total of 1 processors activated (4533.61 BogoMIPS).
[ 0.375657] devtmpfs: initialized
[ 0.382973] print_constraints: dummy:
[ 0.386745] Time: 15:25:57 Date: 09/14/11
[ 0.390891] NET: Registered protocol family 16
[ 0.395465] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[ 0.403018] ACPI: bus type pci registered
[ 0.407084] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0x80000000-0x8fffffff] (base 0x80000000)
[ 0.416367] PCI: not using MMCONFIG
[ 0.419847] PCI: Using configuration type 1 for base access
[ 0.425970] bio: create slab <bio-0> at 0
[ 0.433983] ACPI: Interpreter enabled
[ 0.437641] ACPI: (supports S0 S1 S5)
[ 0.441370] ACPI: Using IOAPIC for interrupt routing
[ 0.446345] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0x80000000-0x8fffffff] (base 0x80000000)
[ 0.455963] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in ACPI
motherboard resources
[ 0.484474] ACPI: No dock devices found.
[ 0.488394] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.497667] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.503958] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.510557] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.517154] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.524443] pci_root PNP0A08:00: host bridge window [mem
0x90000000-0xfdffffff]
[ 0.531732] pci_root PNP0A08:00: host bridge window [mem 0x7f00000000]
[ 0.541076] pci 0000:00:01.0: PCI bridge to [bus 0b-0f]
[ 0.546330] pci 0000:00:02.0: PCI bridge to [bus 10-14]
[ 0.551583] pci 0000:00:03.0: PCI bridge to [bus 15-19]
[ 0.556836] pci 0000:00:05.0: PCI bridge to [bus 1a-1e]
[ 0.562287] pci 0000:00:07.0: PCI bridge to [bus 1f-23]
[ 0.567540] pci 0000:00:09.0: PCI bridge to [bus 24-28]
[ 0.572923] pci 0000:00:1c.0: PCI bridge to [bus 01-05]
[ 0.578318] pci 0000:00:1c.4: PCI bridge to [bus 06-0a]
[ 0.583797] pci 0000:06:00.0: PCI bridge to [bus 07-07]
[ 0.589085] pci 0000:00:1e.0: PCI bridge to [bus 29-2d] (subtractive decode)
[ 0.596170] pci 0000:00:01.0: Dev MPS 256 MPSS 256 MRRS 128
[ 0.601733] pci 0000:00:01.0: Dev MPS 256 MPSS 256 MRRS 128
[ 0.607293] pci 0000:0b:00.0: Dev MPS 256 MPSS 512 MRRS 128
[ 0.612859] pci 0000:0b:00.0: Dev MPS 256 MPSS 256 MRRS 128
[ 0.618420] pci 0000:0b:00.1: Dev MPS 256 MPSS 512 MRRS 128
[ 0.623987] pci 0000:0b:00.1: Dev MPS 256 MPSS 256 MRRS 128
[ 0.629547] pci 0000:00:02.0: Dev MPS 256 MPSS 256 MRRS 128
[ 0.635110] pci 0000:00:02.0: Dev MPS 256 MPSS 256 MRRS 128
[ 0.640670] pci 0000:00:03.0: Dev MPS 256 MPSS 256 MRRS 128
[ 0.646232] pci 0000:00:03.0: Dev MPS 256 MPSS 256 MRRS 128
[ 0.651792] pci 0000:00:05.0: Dev MPS 256 MPSS 256 MRRS 128
[ 0.657354] pci 0000:00:05.0: Dev MPS 256 MPSS 256 MRRS 128
[ 0.662913] pci 0000:00:07.0: Dev MPS 256 MPSS 256 MRRS 128
[ 0.668477] pci 0000:00:07.0: Dev MPS 256 MPSS 256 MRRS 128
[ 0.674037] pci 0000:1f:00.0: Dev MPS 256 MPSS 2048 MRRS 128
[ 0.679692] pci 0000:1f:00.0: Dev MPS 256 MPSS 256 MRRS 128
[ 0.685252] pci 0000:1f:00.1: Dev MPS 256 MPSS 2048 MRRS 128
[ 0.690907] pci 0000:1f:00.1: Dev MPS 256 MPSS 256 MRRS 128
[ 0.696466] pci 0000:00:09.0: Dev MPS 256 MPSS 256 MRRS 128
[ 0.702029] pci 0000:00:09.0: Dev MPS 256 MPSS 256 MRRS 128
[ 0.707588] pci 0000:00:1c.0: Dev MPS 128 MPSS 128 MRRS 128
[ 0.713149] pci 0000:00:1c.0: Dev MPS 128 MPSS 128 MRRS 128
[ 0.718710] pci 0000:01:00.0: Dev MPS 128 MPSS 4096 MRRS 128
[ 0.724362] pci 0000:01:00.0: Dev MPS 128 MPSS 128 MRRS 128
[ 0.729922] pci 0000:00:1c.4: Dev MPS 128 MPSS 128 MRRS 128
[ 0.735483] pci 0000:00:1c.4: Dev MPS 128 MPSS 128 MRRS 128
[ 0.741044] pci 0000:06:00.0: Dev MPS 128 MPSS 128 MRRS 128
[ 0.746608] pci 0000:06:00.0: Dev MPS 128 MPSS 128 MRRS 128
[ 0.752766] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.758510] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned
control mask: 0x00
[ 0.766838] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.781303] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 0.790013] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 0.798725] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 0.807441] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 0.816163] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 0.824891] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 0.833623] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 0.842360] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 0.851054] vgaarb: device added:
PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.859126] vgaarb: loaded
[ 0.861830] vgaarb: bridge control possible 0000:07:00.0
[ 0.867206] PCI: Using ACPI for IRQ routing
[ 0.877012] PCI: Discovered peer bus ff
[ 0.881906] NetLabel: Initializing
[ 0.885305] NetLabel: domain hash size = 128
[ 0.889651] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.894617] NetLabel: unlabeled traffic allowed by default
[ 0.900179] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.907213] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.912436] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.923374] Switching to clocksource hpet
[ 0.928463] AppArmor: AppArmor Filesystem Enabled
[ 0.933162] Switched to NOHz mode on CPU #0
[ 0.937358] pnp: PnP ACPI init
[ 0.940420] ACPI: bus type pnp registered
[ 0.945306] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.952002] system 00:06: [io 0x0400-0x043f] has been reserved
[ 0.957912] system 00:06: [io 0x0440-0x045f] has been reserved
[ 0.963819] system 00:06: [io 0x0460-0x047f] has been reserved
[ 0.969727] system 00:06: [io 0x0580-0x05ff] has been reserved
[ 0.975634] system 00:06: [io 0x05e0-0x05ff] has been reserved
[ 0.981542] system 00:06: [io 0x0cf9] could not be reserved
[ 0.987751] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.994354] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 1.001300] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
[ 1.007901] system 00:0a: [mem 0x80000000-0x8fffffff] has been reserved
[ 1.014501] system 00:0a: [mem 0xffc00000-0xffffffff] has been reserved
[ 1.021101] system 00:0a: [mem 0xfeb00000-0xfebfffff] has been reserved
[ 1.027700] system 00:0a: [mem 0xfe710000-0xfe711fff] has been reserved
[ 1.034299] system 00:0a: [mem 0xfe800000-0xfe9fffff] has been reserved
[ 1.040899] system 00:0a: [mem 0xfc000000-0xfcffffff] has been reserved
[ 1.047498] system 00:0a: [mem 0xfea00000-0xfeafffff] has been reserved
[ 1.054174] system 00:0b: [io 0x0ca0-0x0ca1] has been reserved
[ 1.060084] system 00:0b: [io 0x0ca4-0x0ca9] has been reserved
[ 1.065991] system 00:0b: [io 0x0caa-0x0cab] has been reserved
[ 1.071899] system 00:0b: [io 0x0cac-0x0ccb] has been reserved
[ 1.077878] system 00:0c: [io 0x0ca2] has been reserved
[ 1.083184] system 00:0c: [io 0x0ca3] has been reserved
[ 1.088504] pnp: PnP ACPI: found 13 devices
[ 1.092680] ACPI: ACPI bus type pnp unregistered
[ 1.103104] pci 0000:1f:00.0: no compatible bridge window for [mem
0xfffc0000-0xffffffff pref]
[ 1.111698] pci 0000:1f:00.1: no compatible bridge window for [mem
0xfffc0000-0xffffffff pref]
[ 1.120289] pci 0000:01:00.0: no compatible bridge window for [mem
0xffe00000-0xffffffff pref]
[ 1.128947] pci 0000:00:01.0: PCI bridge to [bus 0b-0f]
[ 1.134163] pci 0000:00:01.0: bridge window [io disabled]
[ 1.139814] pci 0000:00:01.0: bridge window [mem 0x92000000-0x95ffffff]
[ 1.146587] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.152670] pci 0000:00:02.0: PCI bridge to [bus 10-14]
[ 1.157884] pci 0000:00:02.0: bridge window [io disabled]
[ 1.163534] DRHD: handling fault status reg 2
[ 1.167881] INTR-REMAP: Request device [[0b:00.0] fault index 33
[ 1.167882] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is
clear
[ 1.181341] pci 0000:00:02.0: bridge window [mem disabled]
[ 1.186992] pci 0000:00:02.0: bridge window [mem pref disabled]
[ 1.193076] pci 0000:00:03.0: PCI bridge to [bus 15-19]
[ 1.198290] pci 0000:00:03.0: bridge window [io disabled]
[ 1.203941] pci 0000:00:03.0: bridge window [mem disabled]
[ 1.209592] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 1.215674] pci 0000:00:05.0: PCI bridge to [bus 1a-1e]
[ 1.220888] pci 0000:00:05.0: bridge window [io disabled]
[ 1.226539] pci 0000:00:05.0: bridge window [mem disabled]
[ 1.232189] pci 0000:00:05.0: bridge window [mem pref disabled]
[ 1.238274] pci 0000:1f:00.0: BAR 6: assigned [mem 0x90200000-0x9023ffff
pref]
[ 1.245481] pci 0000:1f:00.1: BAR 6: assigned [mem 0x90240000-0x9027ffff
pref]
[ 1.252689] pci 0000:00:07.0: PCI bridge to [bus 1f-23]
[ 1.257904] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 1.263987] pci 0000:00:07.0: bridge window [mem 0x97a00000-0x97afffff]
[ 1.270762] pci 0000:00:07.0: bridge window [mem 0x90200000-0x902fffff
64bit pref]
[ 1.278490] pci 0000:00:09.0: PCI bridge to [bus 24-28]
[ 1.283705] pci 0000:00:09.0: bridge window [io disabled]
[ 1.289355] pci 0000:00:09.0: bridge window [mem disabled]
[ 1.295006] pci 0000:00:09.0: bridge window [mem pref disabled]
[ 1.301089] pci 0000:01:00.0: BAR 6: assigned [mem 0x90000000-0x901fffff
pref]
[ 1.308296] pci 0000:00:1c.0: PCI bridge to [bus 01-05]
[ 1.313512] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.319598] pci 0000:00:1c.0: bridge window [mem 0x97900000-0x979fffff]
[ 1.326372] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x901fffff
64bit pref]
[ 1.334102] pci 0000:06:00.0: PCI bridge to [bus 07-07]
[ 1.339316] pci 0000:06:00.0: bridge window [io disabled]
[ 1.344970] pci 0000:06:00.0: bridge window [mem 0x97000000-0x978fffff]
[ 1.351745] pci 0000:06:00.0: bridge window [mem 0x96000000-0x96ffffff
pref]
[ 1.358958] pci 0000:00:1c.4: PCI bridge to [bus 06-0a]
[ 1.364172] pci 0000:00:1c.4: bridge window [io disabled]
[ 1.369824] pci 0000:00:1c.4: bridge window [mem 0x97000000-0x978fffff]
[ 1.376598] pci 0000:00:1c.4: bridge window [mem 0x96000000-0x96ffffff
64bit pref]
[ 1.384327] pci 0000:00:1e.0: PCI bridge to [bus 29-2d]
[ 1.389541] pci 0000:00:1e.0: bridge window [io disabled]
[ 1.395192] pci 0000:00:1e.0: bridge window [mem disabled]
[ 1.400842] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.406940] pci 0000:00:01.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 1.413643] pci 0000:00:02.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29
[ 1.420347] pci 0000:00:03.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 1.427049] pci 0000:00:05.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
[ 1.433750] pci 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 1.440452] pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 1.447153] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.453848] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.460544] pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.467360] NET: Registered protocol family 2
[ 1.471777] IP route cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 1.478829] TCP established hash table entries: 4096 (order: 4, 65536 bytes)
[ 1.485883] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[ 1.492317] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.498658] TCP reno registered
[ 1.501794] UDP hash table entries: 128 (order: 0, 4096 bytes)
[ 1.507620] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[ 1.513982] NET: Registered protocol family 1
[ 1.518549] Unpacking initramfs...
[ 1.687406] Freeing initrd memory: 9440k freed
[ 1.693517] audit: initializing netlink socket (disabled)
[ 1.698925] type=2000 audit(1316013957.432:1): initialized
[ 1.727705] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.734335] VFS: Disk quotas dquot_6.5.2
[ 1.738294] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.744891] msgmni has been set to 51
[ 1.748667] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 1.756071] io scheduler noop registered
[ 1.759997] io scheduler deadline registered (default)
[ 1.765149] io scheduler cfq registered
[ 1.769622] Serial: 8250/16550 driver, 8 ports, IQ sharing disabled
[ 1.796972] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.823981] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.851243] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.877841] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.883653] Non-volatile memory driver v1.3
[ 1.887836] Linux agpgart interface v0.103
[ 1.891982] Fixed MDIO Bus: probed
[ 1.895426] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.153408] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.158418] mousedev: PS/2 mouse device common for all mice
[ 2.164072] cpuidle: using governor ladder
[ 2.168201] cpuidle: using governor menu
[ 2.172121] EFI Variables Facility v0.08 2004-May-17
[ 2.177252] TCP cubic registered
[ 2.180489] Registering the dns_resolver key type
[ 2.724382] Refined TSC clocksource calibration: 2266.746 MHz.
[ 2.730205] Switching to clocksource tsc
[ 2.960053] registered taskstats version 1
[ 2.964708] Magic number: 11:36:437
[ 2.968399]
/usr/src/packages/BUILD/kernel-default-3.0.4/linux-3.0/drivers/rtc/hctosys.c:
unable to open rtc device (rtc0)
[ 2.981524] Freeing unused kernel memory: 1348k freed
[ 2.986757] Write protecting the kernel read-only data: 10240k
[ 2.997273] Freeing unused kernel memory: 1868k freed
[ 3.005574] Freeing unused kernel memory: 1208k freed
doing fast boot
[ 3.060155] SCSI subsystem initialized
[ 3.064209] rdac: device handler registered
[ 3.072803] Fusion MPT base driver 4.28.00.00suse
[ 3.077501] Copyright (c) 1999-2010 LSI Corporation
[ 3.083151] Fusion MPT SAS Host driver 4.28.00.00suse
[ 3.088244] mptsas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.095194] mptbase: ioc0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total
memory = 110108 kB
[ 3.103644] mptbase: ioc0: Initiating bringup
[ 3.826531] ioc0: LSISAS1068E B3: Capabilities={Initiator}
[ 17.487573] DRHD: handling fault status reg 102
[ 17.492098] INTR-REMAP: Request device [[0b:00.0] fault index 35
[ 17.492099] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is
clear
[ 17.858929] scsi0 : ioc0: LSISAS1068E B3, FwRev=011b5600h, Ports=1, MaxQ=277,
IRQ=16
[ 18.901505] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 0, phy 0,
sas_addr 0x5000c5000be98909
[ 18.911115] scsi target0:0:0: mptsas: ioc0: add device: fw_channel 0, fw_id
0, phy 0, sas_addr 0x5000c5000be98909
[ 18.922384] scsi 0:0:0:0: Direct-Access IBM-ESXS ST973452SS B624 PQ:
0 ANSI: 5
[ 18.932265] scsi 0:0:0:0: mptscsih: ioc0: qdepth=64, tagged=1, simple=1,
ordered=0, scsi_level=6, cmd_que=1
[ 18.941983] sdev dma_alignment 511
[ 18.955710] ata_piix 0000:00:1f.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.962845] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 18.968272] scsi1 : ata_piix
[ 18.971204] scsi2 : ata_piix
[ 18.974117] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30f0 irq 14
[ 18.981065] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30f8 irq 15
[ 18.988030] ata_piix 0000:00:1f.5: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 18.995155] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 19.000573] scsi3 : ata_piix
[ 19.003499] scsi4 : ata_piix
[ 19.006411] ata3: SATA max UDMA/133 cmd 0x3108 ctl 0x3124 bmdma 0x30d0 irq 21
[ 19.013530] ata4: SATA max UDMA/133 cmd 0x3100 ctl 0x3120 bmdma 0x30d8 irq 21
[ 19.347414] ata3: SATA link down (SStatus 0 SControl 300)
[ 19.363449] ata4: SATA link down (SStatus 0 SControl 300)
[ 19.690869] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 19.696527] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 19.855966] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 19.862404] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 19.876006] ata1.00: ATAPI: UJDA782 DVD/CDRW, VA13, max UDMA/33
[ 19.895972] ata1.00: configured for UDMA/33
[ 19.902458] scsi 1:0:0:0: CD-ROM MATSHITA UJDA782 DVD/CDRW VA13
PQ: 0 ANSI: 5
FATAL: Module ide_pci_generic not found.
Creating device nodes with udev
[ 19.935882] udev: starting version 147
[ 19.943790] udevd (164): /proc/164/oom_adj is deprecated, please use
/proc/164/oom_score_adj instead.
[ 19.984341] usbcore: registered new interface driver usbfs
[ 19.989835] usbcore: registered new interface driver hub
[ 20.075008] sd 0:0:0:0: [sda] 143374000 512-byte logical blocks: (73.4
GB/68.3 GiB)
[ 20.087004] usbcore: registered new device driver usb
[ 20.092886] sd 0:0:0:0: [sda] Write Protect is off
[ 20.098540] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 20.105097] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 20.112235] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 20.117463] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[ 20.124869] ehci_hcd 0000:00:1a.7: debug port 1
[ 20.133285] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x97b21400
[ 20.143830] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled,
supports DPO and FUA
[ 20.159143] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 20.164905] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 20.171677] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 20.178882] usb usb1: Product: EHCI Host Controller
[ 20.183753] usb usb1: Manufacturer: Linux 3.0.4-0.11-default ehci_hcd
[ 20.190177] usb usb1: SerialNumber: 0000:00:1a.7
[ 20.194868] hub 1-0:1.0: USB hub found
[ 20.198617] hub 1-0:1.0: 6 ports detected
[ 20.202711] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 20.209841] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 20.215059] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 20.222461] ehci_hcd 0000:00:1d.7: debug port 1
[ 20.230866] ehci_hcd 0000:00:1d.7: irq 17, io mem 0x97b21000
[ 20.244021] sda: sda1 sda2
[ 20.250067] sd 0:0:0:0: [sda] Attached SCSI disk
[ 20.258668] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 20.264446] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 20.271220] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 20.278424] usb usb2: Product: EHCI Host Controller
[ 20.283296] usb usb2: Manufacturer: Linux 3.0.4-0.11-default ehci_hcd
[ 20.289720] usb usb2: SerialNumber: 0000:00:1d.7
[ 20.294402] hub 2-0:1.0: USB hub found
[ 20.298150] hub 2-0:1.0: 6 ports detected
[ 20.304154] uhci_hcd: USB Universal Host Controller Interface driver
[ 20.310535] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 20.317660] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 20.322878] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 20.330283] uhci_hcd 0000:00:1a.0: irq 17, io base 0x000030a0
[ 20.336040] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.342811] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 20.350023] usb usb3: Product: UHCI Host Controller
[ 20.354888] usb usb3: Manufacturer: Linux 3.0.4-0.11-default uhci_hcd
[ 20.361314] usb usb3: SerialNumber: 0000:00:1a.0
[ 20.365999] hub 3-0:1.0: USB hub found
[ 20.369746] hub 3-0:1.0: 2 ports detected
[ 20.373811] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 20.380941] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 20.386159] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[ 20.393566] uhci_hcd 0000:00:1a.1: irq 18, io base 0x00003080
[ 20.399327] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.406099] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 20.413304] usb usb4: Product: UHCI Host Controller
[ 20.418175] usb usb4: Manufacturer: Linux 3.0.4-0.11-default uhci_hcd
[ 20.424599] usb usb4: SerialNumber: 0000:00:1a.1
[ 20.429276] hub 4-0:1.0: USB hub found
[ 20.433028] hub 4-0:1.0: 2 ports detected
[ 20.437086] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 20.444211] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 20.449432] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 5
[ 20.456831] uhci_hcd 0000:00:1d.0: irq 17, io base 0x00003060
[ 20.462586] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.469364] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 20.476583] usb usb5: Product: UHCI Host Controller
[ 20.481449] usb usb5: Manufacturer: Linux 3.0.4-0.11-default uhci_hcd
[ 20.487879] usb usb5: SerialNumber: 0000:00:1d.0
[ 20.492553] hub 5-0:1.0: USB hub found
[ 20.496300] hub 5-0:1.0: 2 ports detected
[ 20.500356] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 20.507485] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 20.512701] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 6
[ 20.520100] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003040
[ 20.525861] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.532631] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 20.539841] usb usb6: Product: UHCI Host Controller
[ 20.544707] usb usb6: Manufacturer: Linux 3.0.4-0.11-default uhci_hcd
[ 20.551131] usb usb6: SerialNumber: 0000:00:1d.1
[ 20.555812] hub 6-0:1.0: USB hub found
[ 20.559558] hub 6-0:1.0: 2 ports detected
[ 20.563612] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 20.570740] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 20.575957] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 7
[ 20.583357] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00003020
[ 20.589116] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.595887] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 20.603097] usb usb7: Product: UHCI Host Controller
[ 20.607964] usb usb7: Manufacturer: Linux 3.0.4-0.11-default uhci_hcd
[ 20.614388] usb usb7: SerialNumber: 0000:00:1d.2
[ 20.619067] hub 7-0:1.0: USB hub found
[ 20.622814] hub 7-0:1.0: 2 ports detected
mount: devpts already mounted or /dev/pts busy
mount: according to mtab, devpts is already mounted on /dev/pts
Boot logging started on /dev/char/../ttyS0(/dev/console) at Wed Sep 14 10:26:16
2011
Trying manual resume from /dev/disk/by-id/scsi-35000c5000be9890b-part1
Invoking userspace resume from /dev/disk/by-id/scsi-35000c5000be9890b-part1
resume: libgcrypt version: 1.5.0
Trying manual resume from /dev/disk/by-id/scsi-35000c5000be9890b-part1
[ 20.875168] PM: Starting manual resume from disk
Invoking in-kernel resume from /dev/disk/by-id/scsi-35000c5000be9890b-part1
Waiting for device /dev/disk/by-id/scsi-35000c5000be9890b-part2 to appear: ok
Mounting root /dev/disk/by-id/scsi-35000c5000be9890b-part2
mount -o rw,acl,user_xattr -t ext3 /dev/disk/by-id/scsi-35000c5000be9890b-part2
/root
[ 21.209680] usb 5-2: new full speed USB device number 2 using uhci_hcd
[ 21.395044] usb 5-2: New USB device found, idVendor=04b3, idProduct=4010
[ 21.401753] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 21.408893] usb 5-2: Product: RNDIS/CDC ETHER
[ 21.413275] usb 5-2: Manufacturer: IBM
[ 21.448903] DRHD: handling fault status reg 202
[ 21.453429] INTR-REMAP: Request device [[0b:00.0] fault index 31
[ 21.453430] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is
clear
[ 21.475844] kjournald starting. Commit interval 5 seconds
[ 21.487869] EXT3-fs (sda2): using internal journal
[ 21.492727] EXT3-fs (sda2): 8 orphan inodes deleted
[ 21.497598] EXT3-fs (sda2): recovery complete
[ 21.555395] EXT3-fs (sda2): mounted filesystem with ordered data mode
Saving dump using makedumpfile
-------------------------------------------------------------------------------
The kernel version is not supported.
The created dumpfile may be incomplete.
Copying data : [100 %]

The dumpfile is saved to /root/var/crash/2011-09-14-10:26/vmcore.

makedumpfile Completed.
-------------------------------------------------------------------------------
Generating README Finished.
Copying System.map Finished.
Copying kernel Finished.
Copying kernel.debug Finished.
[ 138.041949] md: stopping all md devices.
[ 139.035520] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 139.040613] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 139.045689] Restarting system.
[ 139.048740] machine restart

--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.

< Previous Next >
This Thread
  • No further messages