https://bugzilla.novell.com/show_bug.cgi?id=642289
https://bugzilla.novell.com/show_bug.cgi?id=642289#c105
--- Comment #105 from James PEARSON 2011-04-23 15:53:36 CEST ---
I tested my hypothese that the blogd issue only affects fast hard drives today
by only pulling out an old HP nc6120 laptop.
# machine specs
HP nc6120 laptop
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 1.73GHz
Hard Drive Model is: SAMSUNG HM160HC
/dev/sda: SAMSUNG HM160HC: 41°C
Timing buffered disk reads: 194 MB in 3.03 seconds = 64.11 MB/sec
#############
I did a fresh install this morning using the openSUSE-11.4-DVD-i586.iso
- and the AUTOMATIC CONFIGURATION option when I installed
- the network connection was up and running
When the desktop / machine came up on the first soft boot
- I did a zypper
The pc booted OK the first time without the blogd issue.
I added the Packman repo and added a few packages as per usual
The blogd issue appeared next boot
Once I installed the 4 rpms below the blogd issue disappeared.
#######################################################
zypper -f ./sysvinit-2.88+-166.1.i586.rpm
zypper in -f ./sysvinit-2.88+-166.1.i586.rpm
zypper in -f ./aaa_base-11.4-54.66.1.i586.rpm
zypper in -f ./sysvinit-tools-2.88+-166.1.i586.rpm
#######################################################
Analysing what versions of sysvinit* are installed....
#######################################################
Found sysvinit-tools-2.88+-166.1.i586 !
Reading the sysvinit-tools-2.88+-166.1.i586 changelog...
* Wed Apr 20 2011 werner@suse.de
- Aoid possible trouble due raw pts/ptmx terminal line in both
blogd and startpar
- Block SIGTTOU during tcsetattr(3) library call in both blogd
and startpar
- Replace select(2) with pselect(2) in blogd and ensure that
the timeout structure will be reseted after a timeout
* Tue Apr 19 2011 werner@suse.de
- Correct shutdown messages of startpar send via blogd
Found sysvinit-2.88+-166.1.i586 !
Reading the sysvinit-2.88+-166.1.i586 changelog...
* Wed Apr 20 2011 werner@suse.de
- Aoid possible trouble due raw pts/ptmx terminal line in both
blogd and startpar
- Block SIGTTOU during tcsetattr(3) library call in both blogd
and startpar
- Replace select(2) with pselect(2) in blogd and ensure that
the timeout structure will be reseted after a timeout
* Tue Apr 19 2011 werner@suse.de
- Correct shutdown messages of startpar send via blogd
#######################################################
Analysing what versions of aaa_base* are installed....
#######################################################
Found aaa_base-extras-11.4-54.62.1.i586 !
Reading the aaa_base-extras-11.4-54.62.1.i586 changelog...
* Fri Mar 11 2011 werner@suse.de
- Avoid to trap into execute escapes (bnc#678827)
* Tue Feb 22 2011 werner@suse.de
- Work around colon as breaking character in tab completion
- Allow arguments of command done by sudo to complete (bnc#673663)
* Fri Feb 18 2011 werner@suse.de
- Fix minimal support for the old fashion rc service links
Reading the aaa_base-11.4-54.66.1.i586 changelog...
* Thu Apr 21 2011 werner@suse.de
- Start blogd only once at boot (related to bnc#642289)
* Mon Mar 21 2011 werner@suse.de
- Avoid waiting on bind mounts in boot.localfs
- Be aware in refresh_initrd that modules used in initrd may use
options in the /etc/modprobe.d/ files
* Fri Mar 11 2011 werner@suse.de
- Avoid to trap into execute escapes (bnc#678827)
#######################################################
#######################################################
my zypper.log showing the Packman rpm which I installed is under comment 104
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.