https://bugzilla.novell.com/show_bug.cgi?id=661429 https://bugzilla.novell.com/show_bug.cgi?id=661429#c0 Summary: kernel oops in b2c2_flexcop_pci in fs/proc/generic.c Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86 OS/Version: openSUSE 11.3 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: kollix@aon.at QAContact: qa@suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de-DE) AppleWebKit/533.3 (KHTML, like Gecko) konqueror/4.5.90 Safari/533.3 Updated today to openSuse 11.3 and now get the following kernel oops. I found the problem also described here https://bugzilla.redhat.com/show_bug.cgi?id=575873 and there seems to be a bugfix already available. Can you provide the fix in an update for 11.3, please ? from /var/log/boot.msg: <6>[ 6.358634] flexcop-pci: will use the HW PID filter. <6>[ 6.358717] flexcop-pci: card revision 2 <7>[ 6.358798] alloc irq_desc for 22 on node -1 <7>[ 6.358802] alloc kstat_irqs on node -1 <6>[ 6.358814] b2c2_flexcop_pci 0000:02:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 <4>[ 6.358991] ------------[ cut here ]------------ <4>[ 6.359087] WARNING: at /usr/src/packages/BUILD/kernel-default-2.6.34.7/linux-2.6.34/fs/proc/generic.c:317 __xlate_proc_name+0xbc/0xe0() <4>[ 6.359199] Hardware name: <4>[ 6.359268] name 'Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver' <4>[ 6.359341] Modules linked in: budget_av(+) b2c2_flexcop_pci(+) ppdev cx8800 snd_pcm cx88xx saa7146_vv b2c2_flexcop ir_common snd_timer v4l2_common budget_core i2c_algo_bit tveeprom dvb_core ir_core cx24123 videodev v4l1_compat cx24113 saa7146 parport_pc 8139too videobuf_dma_sg videobuf_core s5h1420 ttpci_eeprom btcx_risc sr_mod i2c_i801 cdrom 8139cp sg parport snd soundcore pcspkr iTCO_wdt iTCO_vendor_support snd_page_alloc i2c_core joydev shpchp intel_agp button pci_hotplug preloadtrace usbhid hid uhci_hcd ehci_hcd rtc_cmos sd_mod rtc_core rtc_lib usbcore fan processor ata_generic ata_piix ahci libata scsi_mod thermal thermal_sys hwmon <4>[ 6.362033] Pid: 525, comm: modprobe Not tainted 2.6.34.7-0.5-default #1 <4>[ 6.362108] Call Trace: <4>[ 6.362192] [<c0206303>] try_stack_unwind+0x173/0x190 <4>[ 6.362270] [<c020509f>] dump_trace+0x3f/0xe0 <4>[ 6.362347] [<c020636b>] show_trace_log_lvl+0x4b/0x60 <4>[ 6.362422] [<c0206398>] show_trace+0x18/0x20 <4>[ 6.362497] [<c05b9f5b>] dump_stack+0x6d/0x72 <4>[ 6.362574] [<c024367e>] warn_slowpath_common+0x6e/0xb0 <4>[ 6.362650] [<c024370b>] warn_slowpath_fmt+0x2b/0x30 <4>[ 6.362726] [<c034201c>] __xlate_proc_name+0xbc/0xe0 <4>[ 6.362804] [<c03420a2>] __proc_create+0x62/0x100 <4>[ 6.362881] [<c03429e2>] proc_mkdir_mode+0x22/0x50 <4>[ 6.362957] [<c029aba9>] register_handler_proc+0xe9/0x110 <4>[ 6.363034] [<c0298ef4>] __setup_irq+0x1a4/0x2f0 <4>[ 6.363109] [<c0299144>] request_threaded_irq+0x104/0x1d0 <4>[ 6.363188] [<e0fd21fc>] flexcop_pci_init+0xbc/0x110 [b2c2_flexcop_pci] <4>[ 6.363276] [<e0fd243b>] flexcop_pci_probe+0xab/0x1e0 [b2c2_flexcop_pci] <4>[ 6.363356] [<c0405666>] pci_device_probe+0x56/0x80 <4>[ 6.363436] [<c0498c8d>] really_probe+0x5d/0x200 <4>[ 6.363512] [<c0498ffe>] driver_probe_device+0x3e/0xa0 <4>[ 6.363588] [<c04990d9>] __driver_attach+0x79/0x80 <4>[ 6.363664] [<c0497e3b>] bus_for_each_dev+0x4b/0x70 <4>[ 6.363739] [<c0498b06>] driver_attach+0x16/0x20 <4>[ 6.363813] [<c0498747>] bus_add_driver+0x1c7/0x310 <4>[ 6.363889] [<c04992bf>] driver_register+0x5f/0x100 <4>[ 6.363964] [<c040588d>] __pci_register_driver+0x3d/0xb0 <4>[ 6.364077] [<c020120e>] do_one_initcall+0x2e/0x180 <4>[ 6.364158] [<c0277c11>] sys_init_module+0xb1/0x220 <4>[ 6.364234] [<c0203190>] sysenter_do_call+0x12/0x22 <4>[ 6.364323] [<ffffe430>] 0xffffe430 <4>[ 6.364397] ---[ end trace 589f9ae97b154292 ]--- Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.