https://bugzilla.novell.com/show_bug.cgi?id=572367
https://bugzilla.novell.com/show_bug.cgi?id=572367#c10
--- Comment #10 from LTC BugProxy 2010-09-08 15:17:56 UTC ---
* Di Jun 08 2010 mt@suse.de
[...]
- Fixed ifup-bonding to not fail, when the bonding already exists
(bnc#609809) or when bonding options are using numeric arguments
instead of names (fixes also bnc#572367).
[...]
Tested/Verified -- works fine. With the last released update you can
use both, fail_over_mac=active as well as fail_over_mac=1:
abraxas:/etc/sysconfig/network # grep fail_over_mac ifcfg-bond0
BONDING_MODULE_OPTS='mode=active-backup fail_over_mac=1 miimon=100'
abraxas:/etc/sysconfig/network # rcnetwork restart
Shutting down network interfaces:
br3000 name: Test-Net 300 Bridge
br3000
done
vlan300 name: Test-Net 300 VLAN Link
vlan300
done
br2200 name: Test-Net 200 Bridge
br2200
done
vlan200 name: Test-Net 200 VLAN Link
vlan200
done
bond0 is still used from interfaces eth0 eth1
eth0 device: nVidia Corporation MCP55 Ethernet (rev a2)
eth1 device: nVidia Corporation MCP55 Ethernet (rev a2)
bond0 now going down itself
bond0 name: Ethernet Network Card 0
bond0
done
eth0 device: nVidia Corporation MCP55 Ethernet (rev a2)
eth0
done
eth1 device: nVidia Corporation MCP55 Ethernet (rev a2)
eth1
done
Shutting down service network . . . . . . . . .
done
Hint: you may set mandatory devices in /etc/sysconfig/network/config
Setting up network interfaces:
eth0 device: nVidia Corporation MCP55 Ethernet (rev a2)
eth0
done
eth1 device: nVidia Corporation MCP55 Ethernet (rev a2)
eth1
done
bond0 name: Ethernet Network Card 0
bond0 enslaved interface: eth0
bond0 enslaved interface: eth1
bond0 Starting DHCP4 client.
bond0 IP address: 172.16.2.3/24
bond0 IP address: 2001:6f8:10c4:2000::3/64 as bonding master
bond0
done
vlan200 name: Test-Net 200 VLAN Link
vlan200
done
br2200 name: Test-Net 200 Bridge
br2200 Ports: [vlan200]
br2200 forwarddelay (see man ifcfg-bridge) ... ready
br2200 IP address: 172.16.200.3/24
Checking for ISC DHCPv4 4.x Server:
running
Shutting down ISC DHCPv4 4.x Server
done
Starting ISC DHCPv4 4.x Server [chroot]
done
Checking for ISC DHCPv6 4.x Server:
unused
br2200
done
vlan300 name: Test-Net 300 VLAN Link
vlan300
done
br3000 name: Test-Net 300 Bridge
br3000 Ports: [vlan300]
br3000 forwarddelay (see man ifcfg-bridge) ... ready
br3000
done
Setting up service network . . . . . . . . . .
done
abraxas:/etc/sysconfig/network # cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
Bonding Mode: fault-tolerance (active-backup) (fail_over_mac active)
Primary Slave: None
Currently Active Slave: eth0
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0
Slave Interface: eth0
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:17:31:ca:a3:92
Slave Interface: eth1
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:17:31:ca:a5:a5
*** This bug has been marked as a duplicate of bug 572367 ***
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.