http://bugzilla.novell.com/show_bug.cgi?id=570607
http://bugzilla.novell.com/show_bug.cgi?id=570607#c12
--- Comment #12 from Aaron Williams 2010-02-28 23:05:13 UTC ---
Here's the SMART data again after rebuilding the drive:
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Black family
Device Model: WDC WD1001FALS-00J7B0
Serial Number: WD-WMATV0705568
Firmware Version: 05.00K05
User Capacity: 1,000,204,886,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Feb 28 15:01:14 2010 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting
command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (19200) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 221) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0027 253 222 021 Pre-fail Always
- 4016
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 81
5 Reallocated_Sector_Ct 0x0033 197 197 140 Pre-fail Always
- 17
7 Seek_Error_Rate 0x002e 200 199 000 Old_age Always
- 51
9 Power_On_Hours 0x0032 089 089 000 Old_age Always
- 8661
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always
- 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 76
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always
- 57
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always
- 81
194 Temperature_Celsius 0x0022 117 101 000 Old_age Always
- 33
196 Reallocated_Event_Count 0x0032 198 198 000 Old_age Always
- 2
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline Completed without error 00% 8455 -
# 2 Extended offline Completed without error 00% 7681 -
# 3 Extended offline Interrupted (host reset) 70% 7677 -
# 4 Extended offline Interrupted (host reset) 70% 7451 -
# 5 Extended offline Completed without error 00% 7302 -
# 6 Extended offline Completed without error 00% 7220 -
# 7 Extended offline Interrupted (host reset) 30% 5287 -
# 8 Extended offline Completed without error 00% 4965 -
# 9 Extended offline Completed without error 00% 3947 -
#10 Extended offline Completed without error 00% 21 -
#11 Short offline Completed without error 00% 5 -
#12 Extended offline Interrupted (host reset) 50% 2 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Everything seems the same except the current pending sector count went from 1
to 0.
--
Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.