http://bugzilla.novell.com/show_bug.cgi?id=494199
User harbaugh@ncifcrf.gov added comment
http://bugzilla.novell.com/show_bug.cgi?id=494199#c3
Toni Harbaugh-Blackford changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |harbaugh@ncifcrf.gov
--- Comment #3 from Toni Harbaugh-Blackford 2009-04-20 06:42:53 MDT ---
Unfortunately this technique does NOT work for aic94xx. Even when udev
is running and has loaded the firmware, the aic94xx module complains of
not finding the it's firmware:
$ modprobe aic94xx
WARNING: All config files need .aic94xx: Adaptec aic94xx SAS/SATA driver
version 1.0.3 loaded
conf: /etc/modpraic94xx 0000:04:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
obe.d/thinkpad_aaic94xx: found Adaptec AIC-9410W SAS/SATA Host Adapter, device
0000:04:02.0
cpi, it will be scsi4 : aic94xx
ignored in a futaic94xx: BIOS present (1,1), 1822
ure release.
uaic94xx: ue num:3, ue size:88
devd[164]: seq 825 queued, 'add' 'module'
udevd[164]: seq 825 forked, pid aic94xx: manuf sect SAS_ADDR 500304800003bac0
[861], 'add' 'moaic94xx: manuf sect PCBA SN ORG
dule', 0 secondsaic94xx: ms: num_phy_desc: 8
old
udevdaic94xx: ms: phy0: ENABLED
-event[861]: seqaic94xx: ms: phy1: ENABLED
825 exit with 0aic94xx: ms: phy2: ENABLED
udevd[164aic94xx: ms: phy3: ENABLED
]: seq 826 queueaic94xx: ms: phy4: ENABLED
d, 'add' 'class'aic94xx: ms: phy5: ENABLED
udevd[164aic94xx: ms: phy6: ENABLED
]: seq 826 forkeaic94xx: ms: phy7: ENABLED
d, pid [863], 'aaic94xx: ms: max_phys:0x8, num_phys:0x8
dd' 'class', 0 saic94xx: ms: enabled_phys:0xff
econds old
udevd[164]: seq 825 cleanup, pid [861], status aic94xx: ctrla: phy0: sas_addr:
500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0
0, 0 seconds oldaic94xx: ctrla: phy1: sas_addr: 500304800003bac0, sas
rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0
udevd[164aic94xx: ctrla: phy2: sas_addr: 500304800003bac0, sas rate:0x9-0x8,
sata rate:0x0-0x0, flags:0x0
]: seq 827 queueaic94xx: ctrla: phy3: sas_addr: 500304800003bac0, sas
rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0
d, 'add' 'class'aic94xx: ctrla: phy4: sas_addr: 500304800003bac0, sas
rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0
udevd-eveaic94xx: ctrla: phy5: sas_addr: 500304800003bac0, sas rate:0x9-0x8,
sata rate:0x0-0x, flags:0x0
nt[863]: seq 826aic94xx: ctrla: phy6: sas_addr: 500304800003bac0, sas
rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0
exit with 0
aic94xx: ctrla: phy7: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata
rate:0x0-0x0, flags:0x0
udevd[164]: saic94xx: max_scbs:512, max_ddbs:128
eq 827 forked, paic94xx: setting phy0 addr to 500304800003bac0
id [864], 'add' aic94xx: setting phy1 addr to 500304800003bac0
'class', 0 seconaic94xx: setting phy2 addr to 500304800003bac0
ds old
udeaic94xx: setting phy3 addr to 500304800003bac0
vd[164]: seq 828aic94xx: setting phy4 addr to 500304800003bac0
queued, 'add' 'aic94xx: setting phy5 addr to 500304800003bac0
lass'
udeaic94xx: setting phy6 addr to 500304800003bac0
vd[164]: seq 826aic94xx: setting phy7 addr to 500304800003bac0
cleanup, pi [8aic94xx: num_edbs:21
63], status 0, 0aic94xx: num_escbs:3
seconds old
aic94xx 0000:04:02.0: firmware: requesting aic94xx-seq.fw
udevd-event[864]: seq 827 exit with 0
udevd[164]: seq 828 forked, pid [865], 'add' 'class', 0 seconds old
udevd[164]: seq 827 cleanup, pid [864], status 0, 0 seconds old
udevd[164]: seq 829 queued, 'add' 'class'
udevd-event[865]: seq 828 exit with 0
udevd[164]: seq 829 forked, pid [866], 'add' 'class', 0 seconds old
udevd[164]: seq 830 queued, 'add' 'class'
udevd[164]: seq 828 cleanup, pid [865], status 0, 0 seconds old
udevd-event[866]: seq 829 exit with 0
udevd[164]: seq 830 forked, pid [867], 'add' 'class', 0 seconds old
udevd[164]: seq 829 cleanup, pid [866], status 0, 0 seconds old
udevd[164]: seq 831 queued, 'add' 'class'
udevd-event[867]: seq 830 exit with 0
udevd[164]: seq 831 forked, pid [868], 'add' 'class', 0 seconds old
udevd[164]: seq 830 cleanup, pid [867], status 0, 0 seconds old
udevd-event[868]: seq 831 exit with 0
udevd[164]: seq 831 cleanup, pid [868], status 0, 0 seconds old
udevd[164]: seq 832 queued, 'add' 'module'
udevd[164]: seq 832 forked, pid [873], 'add' 'module', 0 seconds old
udevd-event[873]: seq 832 exit with 0
udevd[164]: seq 832 cleanup, pid [873], status 0, 0 seconds old
udevd[164]: seq 833 queued, 'add' 'module'
udevd-event[877]: seq 833 exit with 0
udevd[16]: seq 833 forked, pid [877], 'add' 'module', 0 seconds old
udevd[164]: seq 833 cleanup, pid [877], status 0, 0 seconds old
udevd[164]: seq 834 queued, 'add' 'scsi'
udevd[164]: seq 834 forked, pid [880], 'add' 'scsi', 0 secnds old
udevd[164]: seq 835 queued, 'add' 'scsi_host'
udevd[164]: seq 836 queued, 'add' 'bsg'
udevd[164]: seq 837 queued, 'add' 'sas_host'
udevd-event[880]: seq 834 exit with 0
udevd[164]: seq 834 cleanup, pid [880], status 0, 0 seconds old
udevd[164]: seq 835 forked, pid [881], 'add' 'scsi_host', 0 seconds old
udevd[164]: seq 836 forked, pid [882], 'add' 'bsg', 0 seconds old
udevd-event[881]: seq 835 exit with 0
udevd[164]: seq 837 forked, pid [883], 'add' 'sas_host', 0 seconds old
udevd-event[882]: device 0x61c5e0 has devpath
'/devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:00.0/0000:03:00.0/0000:04:02.0/host4/bsg/sas_host4'
udevd-event[882]: LINK 'char/253:1' /lib/udev/rules.d/50-udev-default.rules:5
udevd[164]: seq 835 cleanup, pid [881], status 0, 0 seconds old
udevd-event[882]: device 0x61ece0 has devpath
'/devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:00.0/0000:03:00.0/0000:04:02.0/host4'
udevd-event[882]: device 0x61fed0 has devpath
'/devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:00.0/0000:03:00.0/0000:04:02.0'
udevd-event[883]: seq 837 exit with 0
udevd-event[882]: device 0x620230 has devpath
'/devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:00.0/0000:03:00.0'
udevd-event[882]: device 0x620570 has devpath
'/devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:00.0'
udevd-event[882]: device 0x6208a0 has devpath
'/devices/pci0000:00/0000:00:02.0/0000:01:00.0'
udevd-event[882]: device 0x620bb0 has devpath
'/devices/pci0000:00/0000:00:02.0'
udevd[164]: seq 837 cleanup, pid [883], status 0, 0 seconds old
udevd-event[882]: device 0x620ea0 has devpath '/devices/pci0000:00'
udevd-event[882]: NAME 'bsg/sas_host4'
/lib/udev/rules.d/50-udev-default.rules:90
udevd-event[882]: create db link (bsg/sas_host4 char/253:1)
udevd-event[882]: creating device node '/dev/bsg/sas_host4', devnum=253:1,
mode=0660, uid=0, gid=0
udevd-event[882]: mknod(/dev/bsg/sas_host4, 020660, (253,1))
udevd-event[882]: chmod(/dev/bsg/sas_host4, 020660)
udevd-event[882]: chown(/dev/bsg/sas_host4, 0, 0)
udevd-event[882]: '/dev/char/253:1' with target '/dev/bsg/sas_host4' has the
highest priority 0, create it
udevd-event[882]: creating symlink '/dev/char/253:1' to '../bsg/sas_host4'
udevd-event[882]: seq 836 exit with 0
udevd[164]: seq 836 cleanup, pid [882], status 0, 0 seconds old
udevd[164]: seq 838 queued, 'add' 'firmware'
udevd[164]: seq 838 forked, pid [884], 'add' 'firmware', 0 seconds old
udevd-event[884]: seq 838 exit with 0
udevd[164]: seq 838 cleanup, pid [884], status 0, 0 seconds old
aic94xx: Failed to load sequencer firmware file aic94xx-seq.fw, error -2
aic94xx: couldn't init seqs for 0000:04:02.0
udevd[164]: seq aic94xx: couldn't init the chip
839 queued, 'remaic94xx 0000:04:02.0: PCI INT A disabled
aic94xx: probe of 0000:04:02.0 failed with error -2
udevd[164]: seq 839 forked, pid [885], 'remove' 'firmware', 0 seconds old
udevd-event[885]: seq 839 exit with 0
udevd[164]: seq 840 queued, 'remove' 'bsg'
udevd[164]: seq 840 forked, pid [887], 'remove' 'bsg', 0 seconds old
udevd-event[887]: device 0x61e900 filled with db symlink data
'/dev/bsg/sas_host4'
udevd[164]: seq 839 cleanup, pid [885], status 0, 0 seconds old
udevd-event[887]: no reference left, remove '/dev/char/253:1'
udevd-event[887]: removing device node '/dev/bsg/sas_host4'
udevd[164]: seq 841 queued, 'remove' 'sas_host'
udevd-event[887]: seq 840 exit with 0
$ udevd[164]: seq 841 forked, pid [888], 'remove' 'sas_host', 0 seconds old
udevd[164]: seq 840 cleanup, pid [887], status 0, 0 seconds old
udevd[164]: seq 842 queued, 'remove' 'scsi_host'
udevd-event[888]: seq 841 exit with 0
udevd-event[889]: seq 842 exit with 0
udevd[164]: seq 842 forked, pid [889], 'remove' 'scsi_host', 0 seconds old
udevd[164]: seq 841 cleanup, pid [888], status 0, 0 seconds old
udevd[164]: seq 842 cleanup, pid [889], status 0, 0 seconds old
udevd[164]: seq 843 queued, 'remove' 'scsi'
udevd[164]: seq 843 forked, pid [890], 'remove' 'scsi', 0 seconds old
udevd[164]: seq 844 queued, 'add' 'drivers'
udevd-event[890]: seq 843 exit with 0
udevd[164]: seq 844 forked, pid [891], 'add' 'drivers', 0 seconds old
udevd-event[891]: seq 844 exit with 0
udevd[164]: seq 843 cleanup, pid [890], status 0, 0 seconds old
udevd[164]: seq 844 cleanup, pid [891], status 0, 0 seconds old
--
Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
