https://bugzilla.novell.com/show_bug.cgi?id=467597
User tiwai@novell.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=467597#c19
Takashi Iwai changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |NEEDINFO
Info Provider| |fenriswoolf@gmx.net
--- Comment #19 from Takashi Iwai 2009-01-22 07:47:24 MST ---
OK, some facts:
- You can use one of both mics at one; they are exclusive.
- You need to select the internal mic or external mic explicitly via mixer app
before using it.
- The recorded signal isn't automatically routed to the output. You need to
record, then play it back. (There is "Analog Loopback" switch, but you
shouldn't use it unless you know what you are doing.)
- There are some volume controls for recording level in addition.
- For selecting the internal mic as the recording source, choose "Digital Mic
1" in "Digital Input Source" mixer element. In command line, run like
amixer set "Digital Input Source" "Digital Mic 1"
- For selecting the external mic, choose "Analog Inputs" in "Digital Input
Source" mixer element. In command line,
amixer set "Digital Input Source" "Analog Inputs"
- The recording level can be adjusted via "Capture" volume. At least, it
should work for the external mic. Since the internal mic is a digital mic,
this might not work (I'm not sure).
- "Mux" capture volume (might) influence on the recording level. This
basically corresponds to the mic boost level, up to 40dB.
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.