https://bugzilla.novell.com/show_bug.cgi?id=349892
User nice@titanic.nyme.hu added comment
https://bugzilla.novell.com/show_bug.cgi?id=349892#c3
--- Comment #3 from Tamás Németh 2008-01-08 10:13:03 MST ---
To be sure I tested that certain x86_64 system again, and found it to work in
an interesting way.
I found that hald is sometimes(!) unable to start. I started kpowersave, and I
was looking at its icon, which immediately becames dim, when hald is not
functioning properly. Several times I started and stopped hald by
/etc/init.d/haldaemon, and I realized that hald starts correcly only every
second or third occassion (sometimes it's even worse).
So. When the icon of kpowersave became sharp, I was able to run virt-manager,
and when that icon became dim, I was unable to do so. The problem seems to be
that hald is somewhat unstable isn't it?
I will send some parts from /var/log/messages but there should be a better way
to debug it. What should I do? (BTW on my laptop - which runs a 32 bit version
os openSUSE 10.3 - hald (and thus virt-manager) works stable)
/var/log/messages:
Jan 8 17:56:41 carrier1 rchal: CPU frequency scaling is not supported by your
processor.
Jan 8 17:56:41 carrier1 rchal: boot with 'CPUFREQ=no' in to avoid this
warning.
Jan 8 17:56:41 carrier1 rchal: Cannot load cpufreq governors - No cpufreq
driver available
Jan 8 17:56:43 carrier1 gconfd (root-20527): GConf server is not in use,
shutting down.
Jan 8 17:56:43 carrier1 gconfd (root-20527): Exiting
Jan 8 17:57:00 carrier1 rchal: CPU frequency scaling is not supported by your
processor.
Jan 8 17:57:00 carrier1 rchal: boot with 'CPUFREQ=no' in to avoid this
warning.
Jan 8 17:57:00 carrier1 rchal: Cannot load cpufreq governors - No cpufreq
driver available
Jan 8 17:57:14 carrier1 kernel: martian source 255.255.255.255 from
172.23.6.95, on dev xenbr0
Jan 8 17:57:14 carrier1 kernel: ll header:
ff:ff:ff:ff:ff:ff:00:19:e3:0a:28:ba:08:00
Jan 8 17:57:29 carrier1 kernel: martian source 255.255.255.255 from
172.23.4.25, on dev xenbr0
Jan 8 17:57:29 carrier1 kernel: ll header:
ff:ff:ff:ff:ff:ff:00:40:01:25:81:ac:08:00
Jan 8 17:57:40 carrier1 rchal: CPU frequency scaling is not supported by your
processor.
Jan 8 17:57:40 carrier1 rchal: boot with 'CPUFREQ=no' in to avoid this
warning.
Jan 8 17:57:40 carrier1 rchal: Cannot load cpufreq governors - No cpufreq
driver available
Jan 8 17:57:57 carrier1 rchal: CPU frequency scaling is not supported by your
processor.
Jan 8 17:57:57 carrier1 rchal: boot with 'CPUFREQ=no' in to avoid this
warning.
Jan 8 17:57:57 carrier1 rchal: Cannot load cpufreq governors - No cpufreq
driver available
Jan 8 17:58:01 carrier1 rchal: CPU frequency scaling is not supported by your
processor.
Jan 8 17:58:01 carrier1 rchal: boot with 'CPUFREQ=no' in to avoid this
warning.
Jan 8 17:58:01 carrier1 rchal: Cannot load cpufreq governors - No cpufreq
driver available
Jan 8 17:58:14 carrier1 kernel: martian source 255.255.255.255 from
172.23.6.95, on dev xenbr0
Jan 8 17:58:14 carrier1 kernel: ll header:
ff:ff:ff:ff:ff:ff:00:19:e3:0a:28:ba:08:00
Jan 8 17:58:24 carrier1 rchal: CPU frequency scaling is not supported by your
processor.
Jan 8 17:58:24 carrier1 rchal: boot with 'CPUFREQ=no' in to avoid this
warning.
Jan 8 17:58:24 carrier1 rchal: Cannot load cpufreq governors - No cpufreq
driver available
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
