https://bugzilla.novell.com/show_bug.cgi?id=259992#c58
Christoph Resch changed:
What |Removed |Added
----------------------------------------------------------------------------
Severity|Normal |Major
--- Comment #58 from Christoph Resch 2007-10-16 10:28:02 MST ---
Oct 16 18:00:33 zion kernel: ACPI: Critical trip point
Oct 16 18:00:33 zion kernel: Critical temperature reached (110 C), shutting
down.
Oct 16 18:00:33 zion shutdown[28204]: shutting down for system halt
Oct 16 18:00:33 zion powersaved[3546]: WARNING
(checkTemperatureStateChanges:218) Temperature state changed to critical.
Oct 16 18:00:34 zion init: Switching to runlevel: 0
Oct 16 18:00:35 zion kernel: Critical temperature reached (44 C), shutting
down.
happened again just 10 Minutes ago :-( :-(
you misunderstand, i dont want you to break some code, but it seems that this
procedure is tricked by bogus values ..
even if you wont code the software with a redundant check (what is a problem
with 5 seconds to wait) .. there has to be a user-interaction to decide ..
right bevore: i was working with a lot of documents open and 3 VMWares running
. then suddenly:
"Hello i shut down " .. zzzzz .. all within 15 seconds .. ralated to the high
disk-activity on shutdown , submitting a "sudo shutdown -c" , was not possible
in time ..
This is definitly a disaster !!
especially since my Hardware is AMD/ATI who are Top-Supporters of opnesuse
one could not say that its my fault opensuse is not working with my
AMD/ATI/RS480-hardware properly
i cannot see any LM-sensors stuff:
shanti@zion:~> lsmod |grep lm
shanti@zion:~> ps fax |grep lm
6282 pts/1 S+ 0:00 | \_ grep --colour=auto lm
shanti@zion:~>
shanti@zion:~> /etc/init.d/lm_sensors status
it8712-isa-0290
Adapter: ISA adapter
VCore 1: +1.28 V (min = +4.08 V, max = +4.08 V) ALARM
VCore 2: +1.76 V (min = +4.08 V, max = +4.08 V) ALARM
+3.3V: +3.18 V (min = +4.08 V, max = +4.08 V) ALARM
+5V: +4.87 V (min = +6.85 V, max = +6.85 V) ALARM
+12V: +11.71 V (min = +16.32 V, max = +16.32 V) ALARM
-12V: -19.87 V (min = +3.93 V, max = +3.93 V) ALARM
-5V: -2.76 V (min = +4.03 V, max = +4.03 V) ALARM
Stdby: +4.78 V (min = +6.85 V, max = +6.85 V) ALARM
VBat: +4.08 V
fan1: 3750 RPM (min = 0 RPM, div = 8)
fan2: 0 RPM (min = 0 RPM, div = 8)
fan3: 0 RPM (min = 0 RPM, div = 8)
M/B Temp: +45 C (low = -1 C, high = -1 C) sensor = thermistor
CPU Temp: -48 C (low = -1 C, high = -1 C) sensor = thermistor
Temp3: -55 C (low = -1 C, high = -1 C) sensor = thermistor
the only thing i want my bios to tweak is with a new version ( which there is
none ) .. there are no other things to to than to prevent opensuse from
shutting down no matter how many user do whatever business :-o
it may be a kernel-issue in it86 .. or in the it8712-isa-0290 module/driver or
so ..
but the result is overreacting of the operating-system !
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.