https://bugzilla.novell.com/show_bug.cgi?id=304049#c4
Stefan Dirsch
I'm sure I could do a workaround using sax2 and then setting my x&y coordinates Please try. I would like to know if this is a configuration issue only.
This looks strange to me: [...] DefaultDepth 16 SubSection "Display" Depth 16 Modes "1024x768" EndSubSection [...] (II) RADEON(0): ---- Primary Head: Port1 ---- (II) RADEON(0): ---- Secondary Head: Not used ---- (II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000; xclk=25000 (II) RADEON(0): Panel ID string: 1680X1050 WSXGA+ (II) RADEON(0): Panel Size from BIOS: 1680x1050 (II) RADEON(0): BIOS provided dividers will be used. (WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled (II) RADEON(0): MergedFB mode disabled by default. (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0) (II) RADEON(0): Validating modes on Primary head --------- (II) RADEON(0): Panel ID string: 1680X1050 WSXGA+ (II) RADEON(0): Panel Size from BIOS: 1680x1050 (II) RADEON(0): BIOS provided dividers will be used. (II) RADEON(0): Total number of valid DDC mode(s) found: 0 (II) RADEON(0): Valid mode using on-chip RMX: 1024x768 (II) RADEON(0): Total number of valid FP mode(s) found: 1 (--) RADEON(0): Virtual size is 1024x768 (pitch 1024) (**) RADEON(0): Default mode "1600x1024": 121.5 MHz (scaled from 0.0 MHz), 64.9 kHz, 61.1 Hz (II) RADEON(0): Modeline "1600x1024" 121.50 1600 1736 1768 1872 1024 1051 1052 1062 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.