https://bugzilla.novell.com/show_bug.cgi?id=256000 ------- Comment #9 from marc.derumaux@free.fr 2007-06-08 15:21 MST ------- (In reply to comment #8) Hi Stefan, Thank for you advice. I've been trying your commands but that could not make my mouse work properly. I mean that it is detected after several minutes, without roller... Here is the responses to your commands : Little check before to try : xps:/home/marc # hciconfig -a hci0: Type: USB BD Address: 00:16:CF:D1:74:44 ACL MTU: 1017:8 SCO MTU: 64:1 UP RUNNING RX bytes:145 acl:0 sco:0 events:18 errors:0 TX bytes:318 acl:0 sco:0 commands:18 errors:0 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Can't read local name on hci0: Input/output error (5) xps:/home/marc # This first check ends with an I/O error... Starts bad ! trying : xps:/home/marc # rcbluetooth stop Shutting down bluetooth ( hidd sdp hcid) done xps:/home/marc # rmmod hci_usb ERROR: Module hci_usb is in use xps:/home/marc # modprobe hci_usb reset=1 xps:/home/marc # rcbluetooth start Starting bluetooth: hcid sdpd hidd rfcomm done It seems that an error occures as hci_usb is still in use after rcbluetooth has been stopped. After that the mouse still not work. New check : xps:/home/marc # hciconfig -a hci0: Type: USB BD Address: 00:16:CF:D1:74:44 ACL MTU: 1017:8 SCO MTU: 64:1 UP RUNNING RX bytes:215 acl:0 sco:0 events:27 errors:0 TX bytes:598 acl:0 sco:0 commands:27 errors:0 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Can't read local name on hci0: Input/output error (5) This doesn't seems much different from the first one... I wait for 4 minutes and my mouse is (at least) detected. I try a new check : xps:/home/marc # hciconfig -a hci0: Type: USB BD Address: 00:16:CF:D1:74:44 ACL MTU: 1017:8 SCO MTU: 64:1 UP RUNNING RX bytes:221 acl:0 sco:0 events:28 errors:0 TX bytes:601 acl:0 sco:0 commands:28 errors:0 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Can't read local name on hci0: Input/output error (5) Still no change as far as I can see... Hope this can help ?? Thank for your help ! Do you know if new kernel would solve the problem ? I don't know if a new kernel change is shedduled for 10.2 but if 10.3 will take my hardware without pain, I can wait for it... I will use my usb mouse as I've been doing for years and keep my bluetooth mouse aside until next october ! Marc -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.