Mailinglist Archive: opensuse-bugs (8956 mails)

< Previous Next >
[Bug 216061] New: yenta_cardbus: probe of 0000:00:0a.0 failed with error -12 + DMA hard-Disk Trouble
  • From: bugzilla_noreply@xxxxxxxxxx
  • Date: Sat, 28 Oct 2006 04:51:00 -0600 (MDT)
  • Message-id: <bug-216061-21960@xxxxxxxxxxxxxxxxxxxxxxxxx/>
https://bugzilla.novell.com/show_bug.cgi?id=216061

Summary: yenta_cardbus: probe of 0000:00:0a.0 failed with error
-12 + DMA hard-Disk Trouble
Product: SUSE Linux 10.1
Version: Final
Platform: 32bit
OS/Version: SuSE Linux 10.1
Status: NEW
Severity: Critical
Priority: P5 - None
Component: Kernel
AssignedTo: kernel-maintainers@xxxxxxxxxxxxxxxxxxxxxx
ReportedBy: frederik.mattelaere@xxxxxxxxxx
QAContact: qa@xxxxxxx


Hi,
I hope this post is correctly here at this page! The problem I have with the
new version of the kernel updated by the suse linux 10.1 operating system is
that I have errors with the yenta_socket (PCMCIA). Below this mail I did copy
the entire page that I did get with the bash commando dmesg:
The kernel version I use = 2.6.16.21-0.25-default
The PCMCIA-autils version =012-11
The specific error I get with this kernel = yenta_cardbus: probe of
0000:00:0a.0 failed with error -12
The notebook I use = Aspire 1300 serie (1302XC aspire)

I do also have a problem on this computer with the DMA support of mine
Hard-Disk. It seems when I start up the computer it complete freeze the
operating system! I did put off the DMA from mine hard-disk and know it seems
that he is not hanging annymore! If you need more information about mine
system, please feel free to contact me, and give me the commando's I need to
use to get the specific information. I hope this mail will be send to the
correct place, because I'm a newbie on linux...
Thanx for te help,
Best Regards,
Frederik

---------------------
Computer information:
---------------------
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 80)
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: bus master, medium devsel, latency 8
        Memory at a0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [a0] AGP version 2.0
        Capabilities: [c0] Power Management version 2

00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
(prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, medium devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000c000-0000dfff
        Memory behind bridge: e0000000-efffffff
        Prefetchable memory behind bridge: 90000000-9fffffff
        Capabilities: [80] Power Management version 2

00:0a.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus
Controller
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: stepping, slow devsel, IRQ 11
        Memory at 0c000000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
        Memory window 0: 10000000-11fff000 (prefetchable)
        Memory window 1: 12000000-13fff000
        I/O window 0: 00001400-000014ff
        I/O window 1: 00001800-000018ff
        16-bit legacy interface ports at 0001

00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10)
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: bus master, stepping, medium devsel, latency 0
        Capabilities: [c0] Power Management version 2

00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a
[Master SecP PriP])
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: bus master, medium devsel, latency 64
        I/O ports at 1100 [size=16]
        Capabilities: [c0] Power Management version 2

00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1e) (prog-if 00 [UHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: bus master, medium devsel, latency 22, IRQ 11
        I/O ports at 1200 [size=32]
        Capabilities: [80] Power Management version 2

00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10)
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: medium devsel
        Capabilities: [68] Power Management version 2

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio
Controller (rev 40)
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: medium devsel, IRQ 10
        I/O ports at e000 [size=256]
        I/O ports at e100 [size=4]
        I/O ports at e104 [size=4]
        Capabilities: [c0] Power Management version 2

00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller
(rev 20)
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: medium devsel, IRQ 10
        I/O ports at e200 [size=256]
        Capabilities: [d0] Power Management version 2

00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51)
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: bus master, medium devsel, latency 16, IRQ 11
        I/O ports at e800 [size=256]
        Memory at f0000000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [40] Power Management version 2

01:00.0 VGA compatible controller: S3 Inc. VT8636A [ProSavage KN133] AGP4X VGA
Controller (TwisterK) (rev 01) (prog-if 00 [VGA])
        Subsystem: Acer Incorporated [ALI] Unknown device 001d
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
        Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
        Memory at 90000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at 98000000 [disabled] [size=64K]
        Capabilities: [dc] Power Management version 2
        Capabilities: [80] AGP version 2.0




Linux version 2.6.16.21-0.25-default (geeko@buildhost) (gcc version 4.1.0 (SUSE
Linux)) #1 Tue Sep 19 07:26:15 UTC 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000eff0000 (usable)
 BIOS-e820: 000000000eff0000 - 000000000effffc0 (ACPI data)
 BIOS-e820: 000000000effffc0 - 000000000f000000 (ACPI NVS)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
239MB LOWMEM available.
No mptable found.
On node 0 totalpages: 61424
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 57328 pages, LIFO batch:15
  HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v000 OID_00                                ) @
0x000e4010
ACPI: RSDT (v001 OID_00 RSDT_000 0x30303030 & 0x00010007) @ 0x0efffbc0
ACPI: FADT (v002 INSYDE FACP_000 0x00000100 & 0x00010007) @ 0x0efffac0
ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 & 0x00010007) @ 0x0efffb50
ACPI: DBGP (v001 INSYDE SYS_DBGP 0x00000100 & 0x00010007) @ 0x0efffb80
ACPI: DSDT (v001 INSYDE   VT8362 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 10000000 (gap: 0f000000:f0f80000)
Built 1 zonelists
Kernel command line: root=/dev/hda7 vga=0x314    resume=/dev/hda6  
splash=silent
bootsplash: silent mode.
Local APIC disabled by BIOS -- you can enable it with "lapic"
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 1400.331 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 237992k/245696k available (1490k kernel code, 7116k reserved, 608k
data, 156k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2804.35 BogoMIPS (lpj=5608703)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff c1cbf9ff 00000000 00000000 00000000
00000000 00000000
CPU: After vendor identify, caps: 0183f9ff c1cbf9ff 00000000 00000000 00000000
00000000 00000000
Enabling disabled K7/SSE Support.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD mobile AMD Athlon(tm) XP 1600+  stepping 00
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 2323k freed
 not found!
ACPI: setting ELCR to 0200 (from 0c00)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xe8a64, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Disabling VIA memory write queue (PCI ID 0305, rev 80): [55] 3c & 1f -> 1c
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 1) interrupt mode.
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
PCI: setting IRQ 13 as level-triggered
pnp: PnP ACPI: found 11 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
TC classifier action (bugs to netdev@xxxxxxxxxxxxxxx cc hadi@xxxxxxxxxx)
Setting up standard PCI resources
pnp: 00:07: ioport range 0x1600-0x167f has been reserved
pnp: 00:07: ioport range 0x2c8-0x2cf has been reserved
pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:07: ioport range 0x1000-0x105f could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: c000-dfff
  MEM window: e0000000-efffffff
  PREFETCH window: 90000000-9fffffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
  IO window: 00001400-000014ff
  IO window: 00001800-000018ff
  PREFETCH window: 10000000-11ffffff
  MEM window: 12000000-13ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
Simple Boot Flag at 0x37 set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1161976651.600:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Applying VIA southbridge workaround.
vesafb: framebuffer at 0x90000000, mapped to 0xcf880000, using 3750k, total
15296k
vesafb: mode is 800x600x16, linelength=1600, pages=14
vesafb: protected mode interface info at c000:7926
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 50686
bytes,<6>...found (800x600, 28094 bytes, v3).
Console: switching to colour frame buffer device 96x33
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
PNP: PS/2 Controller [PNP0303:KBC,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PS/2 Mouse as /class/input/input1
input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
input: PC Speaker as /class/input/input3
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
 LID BAT0 PBTN AUDI MODM USB0 USB1 LAN0
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 156k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci0000:00:11.1
    ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N080ATMR04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
Probing IDE interface ide1...
hdc: QSI CD-RW/DVD-ROM SBW-241, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (79 C)
Attempting manual resume
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
Adding 481908k swap on /dev/hda6.  Priority:-1 extents:1 across:481908k
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
parport_pc: VIA parallel port: io=0x378, irq=7
lp0: using parport0 (interrupt-driven).
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 11 (level, low) ->
IRQ 11
uhci_hcd 0000:00:11.2: UHCI Host Controller
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:11.2: irq 11, io base 0x00001200
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.16.21-0.25-default uhci_hcd
usb usb1: SerialNumber: 0000:00:11.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: AGP aperture is 64M @ 0xa0000000
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
PCI: Enabling device 0000:00:12.0 (0001 -> 0003)
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
eth0: VIA Rhine II at 0x1e800, 00:c0:9f:1c:a1:f8, IRQ 11.
eth0: MII PHY found at address 1, status 0x782d advertising 01e1 Link 45e1.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) ->
IRQ 10
PCI: Setting latency timer of device 0000:00:11.5 to 64
hwmon: module not supported by Novell, setting U taint flag.
vt8231: module not supported by Novell, setting U taint flag.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
yenta_cardbus: probe of 0000:00:0a.0 failed with error -12
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hda: DMA disabled
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@xxxxxxxxxx
dm-netlink version 0.0.2 loaded
loop: loaded (max 8 devices)
ReiserFS: hda8: found reiserfs format "3.6" with standard journal
ReiserFS: hda8: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda8: checking transaction log (hda8)
ReiserFS: hda8: Using r5 hash to sort names
NTFS driver 2.1.26 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
AppArmor: AppArmor (version 2.0-19.43r6320) initialized
audit(1161976680.693:2): AppArmor (version 2.0-19.43r6320) initialized

NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (1919 buckets, 15352 max) - 232 bytes per conntrack
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PBTN]
audit(1161969500.889:3): audit_backlog_limit=256 old=64 by auid=4294967295
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
powernow-k8: Processor cpuid 680 not supported
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
Detected 1400.331 MHz processor.
powernow: SGTC: 10000
powernow: Minimum speed 500 MHz. Maximum speed 1400 MHz.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 17
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.00.251 LEN=110
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90
bootsplash: status on console 0 changed to on
eth0: no IPv6 routers present
mtrr: no more MTRRs available
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.00.251 LEN=110
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.00.251 LEN=110
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.00.251 LEN=110
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=31606 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK
FIN URGP=0 OPT (0101080AFFFFC5ACB46BDF2F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138
DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=49 ID=0 DF PROTO=TCP SPT=80
DPT=5824 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=31607 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK
FIN URGP=0 OPT (0101080AFFFFC5E4B46BDF2F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138
DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=3807 PROTO=TCP SPT=80
DPT=5824 WINDOW=0 RES=0x24 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=31608 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK
FIN URGP=0 OPT (0101080AFFFFC65AB46BDF2F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138
DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=3809 PROTO=TCP SPT=80
DPT=5824 WINDOW=0 RES=0x24 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=31609 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK
FIN URGP=0 OPT (0101080AFFFFC741B46BDF2F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138
DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=3811 PROTO=TCP SPT=80
DPT=5824 WINDOW=0 RES=0x24 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=31610 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK
FIN URGP=0 OPT (0101080AFFFFC906B46BDF2F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138
DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=3813 PROTO=TCP SPT=80
DPT=5824 WINDOW=0 RES=0x24 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=31613 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK
FIN URGP=0 OPT (0101080AFFFFE189B46BDF2F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138
DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=3819 PROTO=TCP SPT=80
DPT=5824 WINDOW=0 RES=0x04 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=31614 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK
FIN URGP=0 OPT (0101080AFFFFFD89B46BDF2F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT=
MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138
DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=3821 PROTO=TCP SPT=80
DPT=5824 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
SCSI subsystem initialized
ppa: Version 2.07 (for Linux 2.4.x)
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
st: Version 20050830, fixed bufsize 32768, s/g segs 256
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
parport_pc: VIA parallel port: io=0x378, irq=7
lp0: using parport0 (interrupt-driven).
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
ppa: Version 2.07 (for Linux 2.4.x)
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2


--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.

< Previous Next >