Mailinglist Archive: opensuse-bugs (8956 mails)

< Previous Next >
[Bug 205630] suse fails to install on ATI SB600 shipset
  • From: bugzilla_noreply@xxxxxxxxxx
  • Date: Wed, 11 Oct 2006 05:07:35 -0600 (MDT)
  • Message-id: <20061011110735.271C3B4D@xxxxxxxxxxxxxxxxxxxxxx>

joachim.deguara@xxxxxxx changed:

What |Removed |Added
Info Provider| |

------- Comment #7 from joachim.deguara@xxxxxxx 2006-10-11 05:07 MST -------
I tested this with acpi=off or noapic but neither helped. Ran the
2.6.19-rc1-mm1 kernel and the SATA disk and DVD drive appeared. So it appears
that this problem is fixed in the -mm branch. I was a little shocked to see
the SATA drives are now seen as IDE.

libata version 2.00 loaded.
ATI SB600 SATA Legacy IDE: IDE controller at PCI slot 0000:00:12.0
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
ATI SB600 SATA Legacy IDE: chipset revision 0
ATI SB600 SATA Legacy IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST3808110AS, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1
Probing IDE interface ide1...
ide1 at 0x170-0x177,0x376 on irq 15
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
ATIIXP: chipset revision 0
ATIIXP: 100% native mode on irq 16
ide2: BM-DMA at 0x2020-0x2027, BIOS settings: hde:pio, hdf:pio
ATIIXP: simplex device: DMA disabled
ide3: ATIIXP Bus-Master DMA disabled (BIOS)
Probing IDE interface ide2...
Probing IDE interface ide3...

Configure bugmail:
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.

< Previous Next >