April 2013 - openSUSE Autoinstall - openSUSE Mailing Lists

[opensuse-autoinstall] Failure with SuseConfig on Autoyast
by Mario Gzuk 13 Aug '13

13 Aug '13

Hi, since round about one week we get the following error. The setup stands in this state, autoinstall is broken. 2013-02-06 13:45:57 <1> hostname(7562) [YCP] clients/inst_autoconfigure.ycp:41 current step: 26 2013-02-06 13:45:57 <1> hostname(7562) [wfm] Y2CCWFM.cc(createInLevel):148 Parsing finished 2013-02-06 13:45:57 <1> hostname(7562) [Interpreter] mail/widgets.ycp:121 Calling YaST client mail_auto 2013-02-06 13:45:57 <1> hostname(7562) [YCP] clients/mail_auto.ycp:31 ---------------------------------------- 2013-02-06 13:45:57 <1> hostname(7562) [YCP] clients/mail_auto.ycp:32 Mail auto started 2013-02-06 13:45:58 <1> hostname(7562) [YCP] SuSEFirewall.ycp:2522 Firewall configuration has been changed. Writing: $["FW_ALLOW_FW_BROADCAST_DMZ":"no", "FW_ALLOW_FW_BROADCAST_EXT":"no", "FW_ALLOW_FW_BROADCAST_INT":"no", "FW_CONFIGURATIONS_EXT":"sshd", "FW_DEV_EXT":"any eth0", "FW_IGNORE_FW_BROADCAST_DMZ":"no", "FW_IGNORE_FW_BROADCAST_EXT":"yes", "FW_IGNORE_FW_BROADCAST_INT":"no", "FW_IPSEC_TRUST":"no", "FW_LOAD_MODULES":"nf_conntrack_netbios_ns", "FW_LOG_ACCEPT_ALL":"no", "FW_LOG_ACCEPT_CRIT":"yes", "FW_LOG_DROP_ALL":"no", "FW_LOG_DROP_CRIT":"yes", "FW_MASQUERADE":"no", "FW_PROTECT_FROM_INT":"no", "FW_ROUTE":"no", "enable_firewall":false, "start_firewall":false]. 2013-02-06 13:45:58 <1> hostname(7562) [YCP] SuSEFirewall.ycp:2545 Disabling firewall services 2013-02-06 13:45:58 <1> hostname(7562) [YCP] Service.ycp:414 Disabling service SuSEfirewall2_setup 2013-02-06 13:45:58 <1> hostname(7562) [YCP] Service.ycp:414 Disabling service SuSEfirewall2_init 2013-02-06 13:45:58 <1> hostname(7562) [YCP] Service.ycp:403 Enabling service postfix 2013-02-06 13:45:58 <3> hostname(7562) [agent-ini] IniParser.cc(parse):556 Can not open /etc/sysconfig/amavis. 2013-02-06 13:45:58 <1> hostname(7562) [YCP] Service.ycp:82 Der Dienst amavis existiert nicht. 2013-02-06 13:45:58 <3> hostname(7562) [YCP] Service.ycp:165 Service amavis does not exist. 2013-02-06 13:45:58 <1> hostname(7562) [YCP] Service.ycp:82 Der Dienst freshclam existiert nicht. 2013-02-06 13:45:58 <3> hostname(7562) [YCP] Service.ycp:165 Service freshclam does not exist. 2013-02-06 13:45:58 <1> hostname(7562) [YCP] Service.ycp:82 Der Dienst clamd existiert nicht. 2013-02-06 13:45:58 <3> hostname(7562) [YCP] Service.ycp:165 Service clamd does not exist. 2013-02-06 13:45:58 <3> hostname(7562) [agent-ini] IniParser.cc(getTimeStamp):925 Unable to stat '/etc/sysconfig/amavis': Datei oder Verzeichnis nicht gefunden 2013-02-06 13:45:58 <3> hostname(7562) [bash] ShellCommand.cc(shellcommand):78 Setting up postfix local as MDA... 2013-02-06 13:45:58 <3> hostname(7562) [bash] ShellCommand.cc(shellcommand):78 Setting SPAM protection to "off"... 2013-02-06 13:46:00 <3> hostname(7562) [YCP] Report.ycp:523 Fehler bei der Ausführung von SuSEconfig. Can you help me with this issue? The file /etc/sysconfig/amavis exists at this state. Thank you. -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

2 3

[opensuse-autoinstall] Feature: Add <location> tag to <file_script> to get file script from remote location
by Joschi Brauchle 08 May '13

08 May '13

Hi, I have a pretty long bash script as a <file_script>, modifying one of the files provided via <file>. I tried to move the script source out of the XML file by using a <location> tag instead of the <source> inside the <file_script>. But it looks like this is not supported yet...would be nice to have though! Best regards, J Brauchle

4 6

[opensuse-autoinstall] Problems running on startup a service created in a postinstall script in 12.3
by Rainer Krienke 17 Apr '13

17 Apr '13

Hello, to automatically install a openSuSE 12.3 desktop client that fits into our network environment I need to change several configs uopn installtion so little manual postinstallation is needed afterwards. I do this using an autoyast installation that includes a postinstall script. This used to work fine until systemd came up. In openSuSE 12.3 I create a service file /lib/systemd/system/lfinalinstall that looks like this: ------------------ [Unit] Description=lfinalinstall install script After=apparmor.service local-fs.target network.service Before=xdm.service [Service] Type=oneshot Environment=SYSTEMD_NO_WRAP=1 TERM=linux ExecStart=$LSCRIPT RemainAfterExit=yes TimeoutSec=0 StandardInput=tty [Install] WantedBy=default.target ----------------- Next I run "/bin/systemctl enable lfinalinstall" and finally I run "systemctl daemon-reload" After the postinstall scripts of autoyast have been executed my script lfinalinstall is actually beeing started. The problem is that it depends on a running network, but the interface eth0 is still unconfigured (no dhcpcd is running for it yet, no ip assigned) at this time and so my script cannot do the job its supposed to do and fails. After a manual reboot thisngs work. Does anyone have an idea what I have to do to have the finalinstall service started when network is available? The dependency on network.service seems not to work for me. Thanks Rainer Krineke -- Rainer Krienke, Uni Koblenz, Rechenzentrum, A22, Universitaetsstrasse 1 56070 Koblenz, http://userpages.uni-koblenz.de/~krienke, Tel: +49261287 1312 PGP: http://userpages.uni-koblenz.de/~krienke/mypgp.html,Fax: +49261287 1001312

2 2

[opensuse-autoinstall] post-packages sles vs sled
by Mike Marion 03 Apr '13

03 Apr '13

On 11.2 at least, it seems like post-packages works fine for sles, but is completely ignored on sled installs. I've done some testing and am seeing no mention of autoyast even looking at post-packages on the sled installs. Is this a known difference? I saw another thread mentioning a known issue with opensuse 11.4 but that wouldn't explain why sles works and not sled. We have a package that mostly creates links, fun stuff like: /usr/lib64/libXaw3d.so.7 -> libXaw3d.so.8.0 for issues with older tools we still need to support. Rather then deal with trying to make sure dependencies are listed in the rpm itself to ensure the installation order, we just use the post-packages bit. Otherwise it would sometimes install before even the paths existed and would get wiped out by later rpm installs. This problem didn't seem to exist with sles/sled 10.x (for sure 10.4 that I've gone back and tested). -- Mike Marion-Unix SysAdmin/Sr. Staff IT Engineer-http://www.qualcomm.com O'Neill: "I hope you like Guinness sir. I find it a refreshing substitute for... food." ==> Stargate SG-1 -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

2 3

[opensuse-autoinstall] openSUSE 12.3 installation with updates from DVD
by Stephen Fergusson 01 Apr '13

01 Apr '13

Hi all, We have downloaded the openSUSE 12.3 X64 DVD and copied it to a USB pendrive and OK installing from the USB pendrive. We have just downloaded the 1.2GB's of updates from ftp-1.gwdg.de/pub/linux/suse/opensuse/update/12.3 that have been released since the release of 12.3. Is it possible to incorporate these updates onto the USB (or DVD) and get those installed in the initial installation? I have read the information at SUSE / Uwe Gansert / autoyast / autoinstall and used the tool "create_update_source.sh" which has added the updates folder to the USB pendrive but what do I have to do next to tell the install to use this update folder? Have been playing with autoyast and got a profile that nearly works so if it is something that gets added in the autoinst.xml, then that should be OK. I am aware of the ag_initscripts issue with autoyast as described here... [Bug 801878] AutoYast hangs at "Install Required Packages" and waits for. Any help or advise appreciated. Regards, Stephen. PS. Please note... I have also posted this on the openSUSE forums. -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-autoinstall+owner(a)opensuse.org

2 3