Mailinglist Archive: opensuse-arm (170 mails)

< Previous Next >
Re: [opensuse-arm] RPi2, Tumbleweed and "official" 7" RPi touchscreen
On 03/09/2016 02:28 PM, Freek de Kruijf wrote:
Op woensdag 9 maart 2016 13:34:40 schreef Alexander Graf:
On 03/09/2016 01:18 PM, Freek de Kruijf wrote:
Op woensdag 9 maart 2016 11:33:54 schreef Freek de Kruijf:
I tried
openSUSE-Tumbleweed-ARM-JeOS-raspberrypi2.armv7l-2016.03.07-Build2.2.raw.
xz
like you and it worked.
My setup is RPi 2 with micro SD card of 8 GB, HDMI device connected,
Ethernet cable connected. After applying power I see messages about
booting
from the SD card till booting the initrd. After that the screen is black
for several minutes. Finally a greeting message appears showing the
version
of Tumbleweed and a login prompt.
I continue by accessing the system via ssh.
I don't know anything about a connected touchscreen.
Indeed there is a problem. A new boot with the generated system does not
succeed. The system is trying to boot from the network.
So it doesn't find the boot.scr file? Does it exist?
Yes it exists in /boot/, which is the ext3 partition. I compared this build
with the working Build389.1 and I do not see any obvious difference with what
is on the vfat partitions and on the ext3 partitions.

If you have both a working and a non-working image around, could you please compare the output of "printenv" on the u-boot command line on both and send the diff?


Thanks,

Alex
--
To unsubscribe, e-mail: opensuse-arm+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse-arm+owner@xxxxxxxxxxxx

< Previous Next >
List Navigation
Follow Ups