Op maandag 21 december 2015 04:27:40 schreef Andreas Färber:
Am 17.12.2015 um 13:04 schrieb Freek de Kruijf:
I tested the latest released Tumbleweed image for the Raspberry Pi 2B, Build354.2 which shows a black screen and does not boot at all, same as the latest one from Staging, which is from a few days back.
Currently there are no working Tumbleweed images for any of the Raspberry Pi systems. Is there anything I can do, apart from testing the latest images? Yes.
"Black screen" and "does not boot" do not help getting it fixed. Buy yourself a cheap UART adapter (less than 4 EUR for 3.3 V!) and post concrete error output if something is not working. A good report is half the fix!
Dear Andreas, Maybe I can find such a device, but I have no idea how to connect it to my system to get some characters on a screen. I restrict myself to getting all the images for the Raspberry Pi 1B and 2B from http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/ Should I use another source for the images. After putting an image on the (micro-)SD card I test the image with a connected HDMI screen and an Ethernet cable, so I can watch how the system boots. When I report a black screen, this means I do not seen ANY information on the HDMI screen. It does not boot means I do not see the Ethernet connection coming up. Furthermore I can change files on the SD card in case this is relatively simple. Putting a new kernel on it is beyond my capabilities. I do realize I am part of the team, but I have limited capabilities. Reporting about what works and not is about all I can do. After that I hope I am quite willing to regularly follow a cookbook type of procedure and report about the results. I once did something quite simple in OBS. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org