December 2015 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] Attempt to run KIWI on unsupported architecture 'armv8l'
by Dirk Müller 12 Apr '17

12 Apr '17

Hi, this is a known OBS bug, asked the admins to deploy a fix shortly. Greetings, Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

Re: [opensuse-arm] No USB keyboard in Cubietruck
by Ancor Gonzalez Sosa 23 Dec '15

23 Dec '15

On 12/09/2015 07:31 PM, Dirk Müller wrote: > Hi Ancor, > > Cam you provide lsusb/dmesg output? I forgot to keep the mailing list updated. Installing kernel-default from kernel:head fixed the issue. Thanks. -- Ancor González Sosa YaST Team at SUSE Linux GmbH -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 3

[opensuse-arm] New package for ARM: raspberrypi-firmware
by Andreas Färber 22 Dec '15

22 Dec '15

Hello, I have submitted the raspberrypi-firmware package for inclusion in Factory: https://build.opensuse.org/request/show/341314 This package contains VideoCore IV binaries that are read from a FAT partition by the Raspberry Pi boot ROM. Without these files neither the ARM U-Boot bootloader nor an ARM kernel can be booted on that device. It is not really needed on x86 systems, so as alternative we could submit it to openSUSE:Factory:ARM instead. However, since in the past some non-free binaries snuck into this package (disguised as SUSE-Firmware instead of SUSE-NonFree license and probably without obtaining permission first), I think it makes sense to have it go through the full legal review process of openSUSE:Factory. Similarly, I would like to split out arndale-bl1.img from u-boot package as arndale-firmware (a signed version of GPL'ed U-Boot Secondary Program Loader) and to submit odroid{,xu}-firmware at some point, possibly more. This will allow us to build JeOS images for boards with upstream U-Boot and upstream kernel support centrally in openSUSE:Factory:ARM rather than in some Contrib project. In particular my intent here is to drop the devel:ARM:Factory:Contrib:RaspberryPi:upstream project in favor of openSUSE:Factory:ARM. Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton; HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 7

[opensuse-arm] no usb on olinuxino micro /lime2 after upgrade to tumbleweed
by Andreas Gerber 22 Dec '15

22 Dec '15

Dear all, after upgrading from kernel 4.1.3-2 to 4.3.0-2 (tumbleweed) usb devices are not longer detected. This happened on an olinuxiono lime2. A fresh install of the tumbleweed image (build 353.1) on an olinuxino mirco shows the same behavior. Regards Andreas -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 3

[opensuse-arm] Images for Raspberry Pi
by Freek de Kruijf 22 Dec '15

22 Dec '15

I tested the latest released Tumbleweed image for the Raspberry Pi 2B, Build354.2 which shows a black screen and does not boot at all, same as the latest one from Staging, which is from a few days back. Currently there are no working Tumbleweed images for any of the Raspberry Pi systems. Is there anything I can do, apart from testing the latest images? -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

6 16

Re: [opensuse-arm] Images for Raspberry Pi
by Freek de Kruijf 21 Dec '15

21 Dec '15

Op donderdag 17 december 2015 09:15:12 schreef u: > I have had the same experience have had to stop using opensuse on my pi's. > It is very disappointing from what i can tell there is almost zero interest > from the overall opensuse-arm community for supporting raspberry pi > hardware properly. > > On Dec 17, 2015 7:04 AM, "Freek de Kruijf" <freek(a)opensuse.org> wrote: > > I tested the latest released Tumbleweed image for the Raspberry Pi 2B, > > Build354.2 which shows a black screen and does not boot at all, same as > > the > > latest one from Staging, which is from a few days back. > > > > Currently there are no working Tumbleweed images for any of the Raspberry > > Pi > > systems. Is there anything I can do, apart from testing the latest images? The situation is not that negative. I have Tumbleweed systems running on both RPi1 and RPi2 started from a working image, some month ago, on which I am still able to update these to the latest version of Tumbleweed from the repository. So it seems that the only problem is with the boot system, but generating a new initrd still works. -- fr.gr. member openSUSE Freek de Kruijf -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

5 9

[opensuse-arm] openSUSE on Orange Pi PC
by Vladimir Nadvornik 14 Dec '15

14 Dec '15

Hi, in my Hackweek project[1] I tested Orange Pi PC board[2] with openSUSE. This is what I found: There is Tumbleweed image with downstream kernel 3.4.39 [3] - it works with problems, I hit some incompatible IOCTL in V4L2 driver and kernel firmware loading does not work - the kernel can be recompiled from these sources [4] Adding support to mainline is in progress: - U-boot 2016.01-rc2 can boot - I recompiled Tumbleweed kernel with patches from lkml[5]. It boots with gpio and mmc card working. There seems to be also some patches for usb support, but I was not able to identify, what patch exactly is needed. - I think I will try it again in 3 months or so I also tried to package OpenCV 3.0 library with NEON support [6] - the package is here [7], it needs more work on qt5 spec file - in my python code[8] I got about 25% higher fps compared to OpenCV 2 Vladimir [1] https://hackweek.suse.com/13/projects/1130 [2] http://www.orangepi.org/orangepipc/ [3] http://www.orangepi.org/orangepibbsen/forum.php?mod=viewthread&tid=342 [4] https://github.com/loboris/OrangePI-Kernel [5] https://lkml.org/lkml/2015/12/4/685 [6] http://opencv.org/opencv-3-0.html [7] https://build.opensuse.org/package/show/home:nadvornik:opencv3/opencv3 [8] https://github.com/nadvornik/astro -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] Udoo Quad (IMX6Q) hangs at kernel boot
by Oscar C 14 Dec '15

14 Dec '15

Hi, I'm trying to boot my udoo-quad (it's very similar to the cubox-i that we already support) using u-boot and kernel from mainline. Although it boots the kernel fine, it hangs somewhere in the middle without any error. The hang is not always in the same point, sometimes is goes further while others not. Using the same u-boot but with a downstream kernel works fine, so u-boot is not the problem here. Any idea? U-Boot SPL 2015.10 (Nov 20 2015 - 15:18:44) U-Boot 2015.10 (Nov 20 2015 - 15:18:44 +0000) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: Udoo Quad DRAM: 1 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: using phy at 6 FEC [PRIME] Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device 2921 bytes read in 34 ms (83 KiB/s) Running bootscript from mmc ... ## Executing script at 12000000 switch to partitions #0, OK mmc0 is current device 7317720 bytes read in 510 ms (13.7 MiB/s) 48444585 bytes read in 2947 ms (15.7 MiB/s) 32528 bytes read in 206 ms (153.3 KiB/s) Kernel image @ 0x12000000 [ 0x000000 - 0x6fa8d8 ] ## Loading init Ramdisk from Legacy Image at 12a00000 ... Image Name: Initrd Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 48444521 Bytes = 46.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800af0f Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.3.0-2-default (geeko@buildhost) (gcc version 5.2.1 20151008 [gcc-5-branch revision 228597] (SUSE Linux) ) #1 SMP PREEMPT Sat Nov 14 16:19:19 UTC 2015 (734b32c) [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Udoo i.MX6 Quad Board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 64 MiB at 0x4c000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c129e2c0, node_mem_map eeef8000 [ 0.000000] DMA zone: 1710 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 67584 pages, LIFO batch:15 [ 0.000000] PERCPU: Embedded 14 pages/cpu @eeea5000 s24640 r8192 d24512 u57344 [ 0.000000] pcpu-alloc: s24640 r8192 d24512 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260434 [ 0.000000] Kernel command line: root=/dev/mmcblk0p2 plymouth.enable=0 console=ttymxc1,115200n8 loglevel=8 nofb nomodeset video=vesafb:off ignore_loglevel LOGLEVEL=8 earlyprintk=ttymxc1,115200n8,keep log_buf_len=10M print_fatal_signals=1 showopts [ 0.000000] log_buf_len: 16777216 bytes [ 0.000000] early log buf free: 260480(99%) [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 890996K/1048576K available (9992K kernel code, 1225K rwdata, 4596K rodata, 1252K init, 869K bss, 92044K reserved, 65536K cma-reserved, 204800K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc1048260 (14593 kB) [ 0.000000] .init : 0xc1049000 - 0xc1182000 (1252 kB) [ 0.000000] .data : 0xc1182000 - 0xc12b45dc (1226 kB) [ 0.000000] .bss : 0xc12b45dc - 0xc138dd8c ( 870 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 [ 0.000000] GIC physical location is 0xa01000 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000006] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000027] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003419] Console: colour dummy device 80x30 [ 0.003472] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=15000) [ 0.003490] pid_max: default: 32768 minimum: 301 [ 0.003631] Security Framework initialized [ 0.003659] AppArmor: AppArmor initialized [ 0.003842] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003856] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004658] Initializing cgroup subsys io [ 0.004688] Initializing cgroup subsys memory [ 0.004734] Initializing cgroup subsys devices [ 0.004755] Initializing cgroup subsys freezer [ 0.004780] Initializing cgroup subsys net_cls [ 0.004796] Initializing cgroup subsys perf_event [ 0.004811] Initializing cgroup subsys net_prio [ 0.004827] Initializing cgroup subsys pids [ 0.004885] CPU: Testing write buffer coherency: ok [ 0.004919] ftrace: allocating 34582 entries in 102 pages [ 0.066852] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.066985] Setting up static identity map for 0x10209000 - 0x10209098 [ 0.109520] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.124484] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.139484] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.139576] Brought up 4 CPUs [ 0.139603] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.139613] CPU: All CPU(s) started in SVC mode. [ 0.140263] devtmpfs: initialized [ 0.148608] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.149554] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.153930] pinctrl core: initialized pinctrl subsystem [ 0.155835] NET: Registered protocol family 16 [ 0.158453] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.174106] cpuidle: using governor ladder [ 0.189096] cpuidle: using governor menu [ 0.189642] CPU identified as i.MX6Q, silicon rev 1.2 [ 0.208729] No ATAGs? [ 0.208774] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.208784] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.209655] SoCFPGA initialized for DDR self-refresh during suspend. [ 0.211240] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.213145] Serial: AMBA PL011 UART driver [ 0.214681] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 0.240066] mxs-dma 110000.dma-apbh: initialized [ 0.244027] vgaarb: loaded [ 0.246153] SCSI subsystem initialized [ 0.246423] libata version 3.00 loaded. [ 0.248918] NetLabel: Initializing [ 0.248929] NetLabel: domain hash size = 128 [ 0.248935] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.248986] NetLabel: unlabeled traffic allowed by default [ 0.249746] clocksource: Switched to clocksource mxc_timer1 [ 0.303271] AppArmor: AppArmor Filesystem Enabled [ 0.318340] NET: Registered protocol family 2 [ 0.319104] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.319196] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.319321] TCP: Hash tables configured (established 8192 bind 8192) [ 0.319421] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.319479] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.319811] NET: Registered protocol family 1 [ 0.319877] PCI: CLS 0 bytes, default 64 [ 0.320356] Unpacking initramfs... [ 4.228136] Freeing initrd memory: 47312K (c2a00000 - c5834000) [ 4.228397] NetWinder Floating Point Emulator V0.97 (extended precision) [ 4.228702] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 4.232835] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 4.233048] audit: initializing netlink subsys (disabled) [ 4.233133] audit: type=2000 audit(4.205:1): initialized [ 4.234245] zbud: loaded [ 4.234556] VFS: Disk quotas dquot_6.6.0 [ 4.234633] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 4.235461] Key type big_key registered [ 4.236925] Key type asymmetric registered [ 4.236947] Asymmetric key parser 'x509' registered [ 4.237031] bounce: pool size: 64 pages [ 4.237113] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 4.237301] io scheduler noop registered [ 4.237319] io scheduler deadline registered [ 4.237358] io scheduler cfq registered (default) [ 4.238157] imx-weim 21b8000.weim: Driver registered. [ 4.249858] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled [ 4.260168] Serial: AMBA driver [ 4.260560] SuperH (H)SCI(F) driver initialized [ 4.261264] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 283, base_baud = 5000000) is a IMX [ 5.032682] console [ttymxc1] enabled [ 5.037313] msm_serial: driver initialized [ 5.042061] STMicroelectronics ASC driver initialized [ 5.048810] Non-volatile memory driver v1.3 [ 5.053786] [drm] Initialized drm 1.1.0 20060810 [ 5.061442] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully. [ 5.070358] exynos-drm exynos-drm: bound exynos-drm-vidi (ops vidi_component_ops) [ 5.077883] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.084538] [drm] No driver support for vblank timestamp query. [ 5.090515] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 5.100776] imx-ipuv3 2400000.ipu: IPUv3H probed [ 5.106832] imx-ipuv3 2800000.ipu: IPUv3H probed [ 5.114238] libphy: Fixed MDIO Bus: probed [ 5.119073] mousedev: PS/2 mouse device common for all mice [ 5.129793] snvs_rtc 20cc034.snvs-rtc-lp: snvs rtc: you use old dts file, please update it [ 5.138624] snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc0 [ 5.154554] ledtrig-cpu: registered to indicate activity on CPUs [ 5.160688] hidraw: raw HID events driver (C) Jiri Kosina [ 5.169153] NET: Registered protocol family 10 [ 5.176004] ThumbEE CPU extension supported. [ 5.180359] Registering SWP/SWPB emulation handler [ 5.186193] registered taskstats version 1 [ 5.190491] zswap: loaded using pool lzo/zbud [ 5.228373] Key type encrypted registered [ 5.232479] AppArmor: AppArmor sha1 policy hashing enabled [ 5.238985] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 5.245885] snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 1970-01-01 09:24:12 UTC (33852) [ 5.254814] sr_init: No PMIC hook to init smartreflex [ 5.260070] sr_init: platform driver register failed for SR [ 5.279551] Unable to find PPMU node [ 5.283213] exynos5-bus-int: probe of exynos5-bus-int failed with error -2 [ 5.290212] PM: Hibernation image not present or could not be loaded. [ 5.296704] usb_h1_vbus: disabling [ 5.301781] Freeing unused kernel memory: 1252K (c1049000 - c1182000) setterm: cannot (un)set powersave mode: Inappropriate ioctl for device Sat Nov 21 00:00:00 UTC 2015 [ 10.060000] systemd-udevd[235]: starting version 224 [ 10.070595] random: systemd-udevd urandom read with 5 bits of entropy available [ 10.351957] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 10.425796] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 10.440015] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 10.460195] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 10.479908] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 10.522155] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 10.540939] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 10.544879] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 10.544893] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 10.585017] scsi host0: ahci-imx [ 10.588866] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 286 [ 10.630900] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 10.660322] imx-sdma 20ec000.sdma: no event needs to be remapped [ 10.666562] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 10.677733] usbcore: registered new interface driver usbfs [ 10.680455] imx-sdma 20ec000.sdma: initialized [ 10.680893] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 10.690514] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 10.692343] pps_core: LinuxPPS API ver. 1 registered [ 10.692348] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> [ 10.694359] PTP clock support registered [ 10.708041] 2188000.ethernet supply phy not found, using dummy regulator [ 10.712956] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.712960] [drm] No driver support for vblank timestamp query. [ 10.713111] imx-drm display-subsystem: bound imx-ipuv3-crtc.0 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.713198] imx-drm display-subsystem: bound imx-ipuv3-crtc.1 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.713281] imx-drm display-subsystem: bound imx-ipuv3-crtc.4 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.713366] imx-drm display-subsystem: bound imx-ipuv3-crtc.5 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.713561] imx-drm display-subsystem: failed to bind 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]): -517 [ 10.716533] pps pps0: new PPS source ptp0 [ 10.720501] imx-drm display-subsystem: master bind failed: -517 [ 10.739228] sdhci: Secure Digital Host Controller Interface driver [ 10.739231] sdhci: Copyright(c) Pierre Ossman [ 10.740802] sdhci-pltfm: SDHCI platform and OF driver helper [ 10.756839] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.756842] [drm] No driver support for vblank timestamp query. [ 10.756924] imx-drm display-subsystem: bound imx-ipuv3-crtc.0 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.756965] imx-drm display-subsystem: bound imx-ipuv3-crtc.1 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.757011] imx-drm display-subsystem: bound imx-ipuv3-crtc.4 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.757053] imx-drm display-subsystem: bound imx-ipuv3-crtc.5 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.757232] imx-drm display-subsystem: failed to bind 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]): -517 [ 10.757900] imx-drm display-subsystem: master bind failed: -517 [ 10.875784] usbcore: registered new interface driver hub [ 10.877890] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.877894] [drm] No driver support for vblank timestamp query. [ 10.877972] imx-drm display-subsystem: bound imx-ipuv3-crtc.0 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.878014] imx-drm display-subsystem: bound imx-ipuv3-crtc.1 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.878066] imx-drm display-subsystem: bound imx-ipuv3-crtc.4 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.878104] imx-drm display-subsystem: bound imx-ipuv3-crtc.5 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.878288] imx-drm display-subsystem: failed to bind 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]): -517 [ 10.878962] imx-drm display-subsystem: master bind failed: -517 [ 10.883090] libphy: fec_enet_mii_bus: probed [ 10.883960] fec 2188000.ethernet eth0: registered PHC device 0 [ 10.885689] /soc/aips-bus@02100000/usdhc@02198000: voltage-ranges unspecified [ 10.885702] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 10.887931] sdhci-esdhc-imx 2198000.usdhc: No vmmc regulator found [ 10.887937] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found [ 10.888542] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.888545] [drm] No driver support for vblank timestamp query. [ 10.888632] imx-drm display-subsystem: bound imx-ipuv3-crtc.0 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.888679] imx-drm display-subsystem: bound imx-ipuv3-crtc.1 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.888731] imx-drm display-subsystem: bound imx-ipuv3-crtc.4 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.888774] imx-drm display-subsystem: bound imx-ipuv3-crtc.5 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.888950] imx-drm display-subsystem: failed to bind 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]): -517 [ 10.889675] imx-drm display-subsystem: master bind failed: -517 [ 10.924803] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 10.926456] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.926460] [drm] No driver support for vblank timestamp query. [ 10.926539] imx-drm display-subsystem: bound imx-ipuv3-crtc.0 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.926581] imx-drm display-subsystem: bound imx-ipuv3-crtc.1 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.926631] imx-drm display-subsystem: bound imx-ipuv3-crtc.4 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.926669] imx-drm display-subsystem: bound imx-ipuv3-crtc.5 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.926848] imx-drm display-subsystem: failed to bind 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]): -517 [ 10.929468] imx-drm display-subsystem: master bind failed: -517 [ 10.936182] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.936186] [drm] No driver support for vblank timestamp query. [ 10.936279] imx-drm display-subsystem: bound imx-ipuv3-crtc.0 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.936325] imx-drm display-subsystem: bound imx-ipuv3-crtc.1 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.936372] imx-drm display-subsystem: bound imx-ipuv3-crtc.4 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.936412] imx-drm display-subsystem: bound imx-ipuv3-crtc.5 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.936620] imx-drm display-subsystem: failed to bind 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]): -517 [ 10.937350] imx-drm display-subsystem: master bind failed: -517 [ 10.954816] ata1: SATA link down (SStatus 0 SControl 300) [ 10.954864] ahci-imx 2200000.sata: no device found, disabling link. [ 10.954870] ahci-imx 2200000.sata: pass .hotplug=1 to enable hotplug [ 10.977591] mmc0: host does not support reading read-only switch, assuming write-enable [ 10.983841] mmc0: new high speed SDHC card at address 0007 [ 10.990967] mmcblk0: mmc0:0007 SD16G 14.4 GiB [ 10.992540] mmcblk0: p1 p2 [ 10.994986] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.994991] [drm] No driver support for vblank timestamp query. [ 10.995085] imx-drm display-subsystem: bound imx-ipuv3-crtc.0 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.995135] imx-drm display-subsystem: bound imx-ipuv3-crtc.1 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.995182] imx-drm display-subsystem: bound imx-ipuv3-crtc.4 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.995224] imx-drm display-subsystem: bound imx-ipuv3-crtc.5 (ops ipu_crtc_ops [imx_ipuv3_crtc]) [ 10.995422] imx-drm display-subsystem: failed to bind 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]): -517 [ 10.998484] imx-drm display-subsystem: master bind failed: -517 [ 11.286322] usbcore: registered new device driver usb [ 11.297421] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Thanks! -- Oscar -- Cheers -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 4

[opensuse-arm] JeOS-beaglebone doesn't boot (uboot 2016.01-rc1)
by Matwey V. Kornilov 13 Dec '15

13 Dec '15

Hello, I am using openSUSE-Tumbleweed-ARM-JeOS-beaglebone.armv7l-1.12.1-Build350.1.raw from openSUSE:Factory:ARM and see the following: U-Boot SPL 2016.01-rc1 (Dec 01 2015 - 16:30:32) bad magic bad magic spl_register_fat_device: fat register err - -1 spl_register_fat_device: fat register err - -1 spl_load_image_fat: error reading image u-boot.img, err - -1 spl: ext4fs_open failed spl: ext4fs_open failed spl_load_image_ext: error reading image uImage, err - -1 U-Boot 2016.01-rc1 (Dec 01 2015 - 16:30:32 +0000) Watchdog enabled I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Error - No Valid Environment Area found *** Warning - bad CRC, using default environment Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether => Something is probably wrong. p.s. I am not sure that it is related to u-boot, but is there any reason why rc-s of u-boot appear in Factory? Would it be better to test them on kittens instead of users? -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 8

[opensuse-arm] No new JeOS images for Raspberry Pi 1, also meant for Raspberry Pi Zero?
by Freek de Kruijf 11 Dec '15

11 Dec '15

Since September there are new images for other environments than JeOS, but not anymore for this environment. These last images did not work, I don't know why. Is that the reason there are no new images? Are these images also meant for Raspberry Pi Zero? -- fr.gr. member openSUSE Freek de Kruijf -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 2