February 2014 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] Does NOT boot on Pandaboard-ES Rev B3
by 孙钰 28 Apr '14

28 Apr '14

Hi all, Neither the 12.3 and 13.1 image boot on Pandaboard-ES Rev B3 because the Modification of Elpida DDR2 RAM Here follows the serial port messages: U-Boot SPL 2013.04 (Jan 08 2014 - 14:33:37) OMAP4460 ES1.1 SDRAM: identified size not same as expected size identified: 0 expected: 40000000 Regards, SunYu -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

5 15

[opensuse-arm] Beaglebone black 13.1 JEOS
by lists 12 Mar '14

12 Mar '14

Is the JEOS for the Beaglebone suitable for the Beaglebone Black? Specifically as found on this page. > http://download.opensuse.org/ports/armv7hl/distribution/13.1/appliances/ -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

5 20

[opensuse-arm] Issues booting OMAP5 board
by Andrew Wafaa 28 Feb '14

28 Feb '14

Hi, I'm currently trying to bring up a uEVM board, and have what I believe all the correct components for it [0]. Regardless of having a dtb package and using kernel 3.14-rc2 it still fails to boot, with u-boot complaining. Below is my boot log, does anyone have ideas/tips to resolve this? U-Boot SPL 2014.01 (Feb 25 2014 - 21:55:07) OMAP5432 ES2.0 U-Boot 2014.01 (Feb 25 2014 - 21:55:07) CPU : OMAP5432 ES2.0 Board: OMAP5432 uEVM I2C: ready DRAM: 2 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: No ethernet found. Hit any key to stop autoboot: 0 mmc0 is current device SD/MMC found on device 0 ** Unrecognized filesystem type ** 4713776 bytes read in 271 ms (16.6 MiB/s) ** File not found /boot/omap5-uevm.dtb ** Booting from mmc0 ... Kernel image @ 0x80200000 [ 0x000000 - 0x47ed30 ] ERROR: Did not find a cmdline Flattened Device Tree Could not find a valid device tree mmc1(part 0) is current device SD/MMC found on device 1 ** Unrecognized filesystem type ** ** No partition table - mmc 1 ** I'm hoping to be able to demo this at Linaro Connect next week with Xen running ontop. Thanks, Andy -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 11

Re: [opensuse-arm] Does NOT boot on Pandaboard-ES Rev B3
by 孙钰 25 Feb '14

25 Feb '14

I tried to replace both of the files in Factory image by: cp arch/arm/boot/zImage /MySdcard/boot/zImage cp arch/arm/boot/dts/omap4-panda-es.dtb /MySdcard/boot/dtb/omap4-panda-es.dtb still sticks at Starting kernel ... -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 3

[opensuse-arm] How to create a new image
by Andrew Wafaa 19 Feb '14

19 Feb '14

Hi, I'm hoping to create a new image for testing on the OMAP5 powered uEVM board. I've successfully built the kernel and dtb packages (using 3.14-rc3) and would now like to get it all into a usable package. I was thinking of creating a new image called OMAP5 to prevent any confusion. I've got a copy of the JeOS package but I'm not 100% sure on which files I need to edit. Am I correct in thinking I need to edit Images.kiwi.in and pre_checkin.sh? My understanding is that I can re-use the panda components, just replace the dtb-omap4 with dtb-omap5 as kernel and u-boot packages should be fine. Thanks, Andy -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 2

[opensuse-arm] Issues with second boot
by Andrew Wafaa 18 Feb '14

18 Feb '14

I know I've been grumbling about this for at least today on IRC, but I'm aware that not everyone is on IRC. At present I'm trying to reboot my Arndale board using the Factory image, and failing :( Firstly, neither shutdown, reboot or init 0, init 6 commands work. Secondly, if I do a hard poweroff and poweron the system fails to boot properly and drops me to the maintenance shell as it can't find the root device, it cant find the disk by id. Has anyone else replicated this issue, doesn't have to be on an Arndale? Also if anyone has any clues, as to how to resolve it I'd appreciate it. Thanks, Andy -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] [PATCH] Enable XENFS on ARMv7 & ARMv8 needed for running Xen hypervisor
by Andrew Wafaa 11 Feb '14

11 Feb '14

Hi, If possible could you apply the attached patch to both Factory and 13.1 kernels? Many thanks, Andy

1 1

[opensuse-arm] Latest Chromebook images
by Daniel Bischof 06 Feb '14

06 Feb '14

Hi, are the latest Chromebook images supposed to work? I tried the most recent Factory-ARM-XFCE-chromebook.armv7l-1.12.1-Build169.2 (of today) and got ----- ** File not found uEnv.txt Loading file "boot.scr" from mmc device 1:2 (lxboot) 2138 bytes read Running bootscript ... ## Executing script at 40007000 mmc_init err 0, time 101923 mmc0(part 0) is current deuice Loading file "boot/linux.vmx" from mmc deuice 0:2 (KERN-A) Failed to mount ext2 filesystem ... ** Bad ext2 partition or disk — mmc 0:2 ** mmc1 is current device Loading file "boot/linux.vmx" from mmc device 1:2 (lxboot) 3568304 bytes read Loading file "boot/initrd.uboot" from mmc device 1:2 (lxboot) ** ext2fs doesn't support tripple indirect blocks. ** ** Unable to read "boot/initrd.uboot" from mmc 1:2 ** Loading file "dtb/exynos5250—snow.dtb" from mmc device 1:2 (lxboot) 34150 bytes read ## Booting kernel from Legacy Image at 40007000 ... Image Name: Linux—3.4.0—2—chromebook Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3568240 Bytes = 3.4 MiB Load address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 4f000000 ... Image Name: Initrd Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 156490936 Bytes = 149.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... Bad Data CRC Ramdisk image is corrupt or invalid mmc0(part 0) is current device ** Block device usb 0 not supported mmc1 is current device ** Block device usb 1 not supported (Re)start USB... USB: Register 1313 NbrPorts 3 [USB] usb_lowlevel_init:852 0 [USB] usb_lowlevel_init:852 1 USB EHCI 1.00 1 USB Device(s) found scanning bus for storage devices ... 0 Storage Device(s) found Tring USB on device ** Block device usb 0 not supported ** Block device usb 0 not supported SMDK5250 # ----- on initial boot. Same result with most recent 13.1 images. Best regards, --D.B. -- Daniel Bischof <suse-bugz(a)bischof.org>

5 7

[opensuse-arm] Please trigger rebuild of openSUSE:Factory:ARM > ImageMagick
by Guillaume Gardet 06 Feb '14

06 Feb '14

Hi, Could you, trigger rebuild of openSUSE:Factory:ARM > ImageMagick. It will fix E17 and XFCE images in factory (especially for chromebook) because libwebp has been update from version 4 to version 5. OBS should really trigger a rebuild if package deps are rebuilt. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 8

[opensuse-arm] clamav not available on openSUSE 13.1 repository for armv6hl
by Freek de Kruijf 06 Feb '14

06 Feb '14

I could not find the package clamav on the openSUSE 13.1 repository for armv6hl (Raspberry Pi). Checking the openSUSE build service it appears that clamav is locked, so no longer build, in that repository, but in a security repository, which does not do a build for armv6hl. In the security repository the package is build OK for the enabled architectures. How can I be of help to make it build for armv6hl and other architectures? -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 10