Le 14/08/2013 13:51, Alexander Graf a écrit :
On 07.08.2013, at 14:16, Guillaume Gardet wrote:
Hi,
some updates below:
Le 05/08/2013 16:35, Guillaume Gardet a écrit :
Hi,
I tested beagle image from factory (but this problem should occur on all other boards) and it does not boot at all, with this message: ************************************************************ U-Boot SPL 2013.04 (May 28 2013 - 14:13:22) OMAP SD/MMC: 0 spl: error reading image u-boot.bin, err - -1 ### ERROR ### Please RESET the board ### ************************************************************
First problem is in BOOT partition, all available files are under a boot/ folder and nothing at the root of the partition.
Still need to be fixed. Any kiwi update which could have broken things? Marcus? Previously we had files in the root of the partition but also in the boot/ folder.
I think first partition should be mounted in /boot entry of 2nd partition (main FS). Was it the case previously, or not? Alex? Yes, the first partition is /boot in fstab.
I mean during kiwi build.
When u-boot want to run load_fdt for non device tree board, it tries to run 1. Which is wrong but should not be fatal. Fixed.
This was on purpose. 1 is "true", so it's a command that simply gives us a good error code.
Oups. Should be re-enabled if it is needed. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org