October 2012 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] armStoneA8: Failed to mount /dev
by Andreas Färber 02 Dec '12

02 Dec '12

Hello, On the armStoneA8 board, using NBoot V14 and U-Boot, I'm trying to boot the downstream 3.3.7 kernel (BSP V1.1) from SD with a LimeJeOS rootfs on SD. I had to reconfigure the kernel with CONFIG_LBDAF to mount the ext3[*] rootfs r/w. This is what I get now: [...] mmc0: new high speed SDHC card at address b368 IPv6 over IPv4 tunneling driver mmcblk0: mmc0:b368 NCard 7.48 GiB NET: Registered protocol family 17 can: controller area network core (rev 20090105 abi 8) mmcblk0: p1 NET: Registered protocol family 29 can: raw protocol (rev 20090105) can: broadcast manager protocol (rev 20090105 t) Registering the dns_resolver key type VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) kjournald starting. Commit interval 5 seconds EXT3-fs (mmcblk0p1): using internal journal EXT3-fs (mmcblk0p1): recovery complete EXT3-fs (mmcblk0p1): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) on device 179:1. Freeing init memory: 148K Failed to mount /dev: No such device Our rootfs definitely contains /dev, so what is this complaining about? Thanks, Andreas [*] U-Boot seemed to hang loading zImage from ext4. -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 6

[opensuse-arm] openSUSE 12.2 RC2 Release preparation
by Dirk Müller 26 Nov '12

26 Nov '12

Hi ARM :-), Hi Jos, Alex and I have worked yesterday a few hours to finish up the last remaining bugs for a 12.2 RC2 release. we plan that this is the last RC before final 12.2 for ARM, which is scheduled for November 6th. The changes over RC1 are: * various bugfixes in the imaging * add an update repository to the images for maintenance * adding various fixes for booting machines without RTC with a reasonable system time * Adding a YaST firstboot stage for configuring the country, language, root password and creating the first user login * various smaller fixes in packaging We have also enabled support for the following SoCs' * Calxeda Highbank * CuBox * IMX 53 * Samsung Origen In addition, we added XFCE images for panda and beagle board. We know that those still have some bugs that need to be fixed for the final release. the JeOS images are good though. We've personally tested some of the variations, but not all of them. We'd like to get more feedback about it. In addition to that, we've also worked on graphics support for a few of the boards, with varying results. The Raspberry Pi image is not part of this release, it will come at a later point in time as a separate announcement. The images are available for download from: http://download.opensuse.org/ports/armv7hl/distribution/12.2-RC2/ This link is not yet up, I'm still waiting for the build service team to sign and upload the images there. This link: http://download.opensuse.org/ports/armv7hl/distribution/openSUSE-stable/ will point to RC2 once it is available so we could use that one as well. I hope that we can do the announcement on sunday evening latest, but it might slip to monday I'm afraid :( Please work on the promo bits, and fire at will once the link above (with - RC2) is working. The rest of the announcement can be reused from the RC1 announcement that Andrew did. Thanks! Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

7 31

[opensuse-arm] Please fix kiwi package (conflict in kiwi.changes)
by Guillaume Gardet 06 Nov '12

06 Nov '12

Hi, kiwi is broken due to an update on Virtualization:Appliances which lead to a conflict in kiwi.changes. Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 4

[opensuse-arm] 12.2 rc2 - beagle
by Guillaume Gardet 01 Nov '12

01 Nov '12

Hi, I tested quickly JeOS and XFCE beagle images on a beagleboard xM. YaST firstboot is launched, so it is very nice to have a configured board. But it is launched on the serial port and not on the DVI output. Is it configurable? I guess it is launched on the debug console? It could be nice to have it on serial for JeOS and on graphical user interface on XFCE image. Moreover, XFCE (and X) is (are) not launched automatically on boot. I needed to do a "sudo startxfce4". Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 5

[opensuse-arm] kiwi image for Raspberry Pi (armv5)
by Guillaume Gardet 31 Oct '12

31 Oct '12

Hi, with my first pacthes for armv5 support to kiwi, I am nearly done but I have a problem with vmlinuz. I get the following error during Raspberry Pi image build: [ 1927s] mv: cannot stat 'vmlinuz-3.1.10-1.17-raspberrypi': No such file or directory Which lead to the final error: [ 1928s] Oct-31 15:43:23 <1> : Extracting kernel [ 1928s] Oct-31 15:43:23 <1> : EXEC [pwd] [ 1928s] Oct-31 15:43:24 <3> : Can't find kernel for extraction: No such file or directory It seems that the kiwi source code is: ******************************************************************************** #========================================== # create common kernel files, last wins ! #------------------------------------------ pushd /boot if [ -f uImage-$VERSION ];then mv uImage-$VERSION vmlinuz elif [ -f vmlinux-$VERSION.gz ];then mv vmlinux-$VERSION.gz vmlinux.gz mv vmlinuz-$VERSION vmlinuz elif [ -f vmlinuz-$VERSION.el5 ];then mv vmlinux-$VERSION.el5 vmlinuz elif [ -f vmlinuz-$VERSION ];then mv vmlinuz-$VERSION vmlinuz elif [ -f image-$VERSION ];then mv image-$VERSION vmlinuz else rm -f vmlinux cp vmlinux-$VERSION vmlinux mv vmlinux-$VERSION vmlinuz fi ******************************************************************************** So, "mv" should occur only when the file exist. In my case it should not stop in vmlinuz-$VERSION but in image-$VERSION. Any idea what is going on? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 1

[opensuse-arm] Interesting ARM news
by Joop Boonen 31 Oct '12

31 Oct '12

Hi all, Some quite interesting ARM news. ARM introduces Cortex A-50 (armv8) processors http://www.arm.com/about/newsroom/arm-launches-cortex-a50-series-the-worlds… AMD will produce ARM processors for servers. http://www.amd.com/us/press-releases/Pages/press-release-2012Oct29.aspx Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] kiwi initrd and driver support
by Alexander Graf 30 Oct '12

30 Oct '12

Hi Marcus, I'm wondering how the kiwi initrd determines which drivers need to be included in the initrd. To be precise, I'm missing the drivers/mtd directory which renders the vexpress image unusable, because it doesn't contain disk drivers ;). Do you manually pick modules during the creation of the initial kiwi initrd? Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] Re: [obs submit-request 139668] openSUSE:12.2:ARM:Contrib:Tegra/JeOS-ac100: created by worldcitizen
by Alexander Graf 29 Oct '12

29 Oct '12

On 29.10.2012, at 15:03, <joop.boonen(a)boonen.org> wrote: > > > home:worldcitizen:branches:openSUSE:12.2:ARM:Contrib:Tegra/JeOS-ac100 -> openSUSE:12.2:ARM:Contrib:Tegra/JeOS-ac100 > > > https://build.opensuse.org/request/show/139668 > > Description: testing via uboot-image-install also added all improvements suggested by agraf > > ++++++ Images.kiwi.in > --- Images.kiwi.in > +++ Images.kiwi.in > @@ -54,6 +54,10 @@ > # define BOOTKERNEL exynos > # define KERNEL_CMDLINE_STR "console=ttySAC2,115200n8" > # define EXTRA_PACKAGES PKG_BOOT_TAG(u-boot-origen) > +#elif IS_FLAVOR_ac100 > +# define BOOTKERNEL tegra-ac100 > +# define KERNEL_CMDLINE_STR "" > +# define EXTRA_PACKAGES abootimg This needs special escaping. Check out the way it's done for origen just above :) > #else > # define BOOTKERNEL default > # define KERNEL_CMDLINE_STR "" > @@ -85,8 +89,6 @@ > <preferences> > #if IS_FLAVOR_rootfs > <type image="tbz" primary="true"/> > -#elif IS_FLAVOR_ac100 > - <type image="tbz" primary="true"/> > #else > <type image="oem" filesystem="ext3" boot="oemboot/suse-12.2" bootloader="uboot" > kernelcmdline=KERNEL_CMDLINE_STR > @@ -112,6 +114,11 @@ > <repository type="rpm-md"> > <source path="obs://openSUSE:12.2:ARM/standard"/> > </repository> > +#if IS_FLAVOR_ac100 > + <repository type="rpm-md"> > + <source path="obs://openSUSE:12.2:ARM:Contrib:Tegra/standard"/> > + </repository> > +#endif >  > <strip type="tools"> > <file name="qemu-arm-binfmt"/> > > ++++++ JeOS-ac100.kiwi > --- JeOS-ac100.kiwi > +++ JeOS-ac100.kiwi > @@ -17,7 +17,11 @@ > </specification> > </description> > <preferences> > - <type image="tbz" primary="true"/> > + <type image="oem" filesystem="ext3" boot="oemboot/suse-12.2" bootloader="uboot" kernelcmdline="" editbootconfig="uboot-image-setup" editbootinstall="uboot-image-install"> > + <oemconfig> > + <oem-swapsize>500</oem-swapsize> > + </oemconfig> > + </type> > <version>1.12.1</version> > <packagemanager>zypper</packagemanager> > <locale>en_US</locale> > @@ -42,57 +46,56 @@ > <file name="qemu-arm-binfmt"/> > <file name="qemu-arm"/> > </strip> > - <packages type="bootstrap"> > - <package name="kernel-tegra-ac100" bootinclude="true"/> > - <package name="abootimg"/> > - <package name="aaa_base"/> > - <package name="aaa_base-extras"/> > - <package name="branding-openSUSE"/> > - <package name="cracklib-dict-full"/> > - <package name="dhcpcd"/> > - <package name="elfutils"/> > - <package name="filesystem"/> > - <package name="glibc-locale"/> > - <package name="hwinfo"/> > - <package name="ifplugd"/> > - <package name="insserv"/> > - <package name="iputils"/> > - <package name="kbd"/> > - <package name="kernel-firmware"/> > - <package name="less"/> > - <package name="lvm2"/> > - <package name="mkinitrd"/> > - <package name="module-init-tools"/> > - <package name="ncurses-utils"/> > - <package name="netcfg"/> > -  > - <package name="ntp"/> > - <package name="openssh"/> > - <package name="openSUSE-release"/> > - <package name="pkg-config"/> > - <package name="polkit"/> > - <package name="procps"/> > - <package name="pwdutils"/> > - <package name="plymouth"/> > - <package name="qemu-linux-user-arm" bootinclude="true"/> > - <package name="rpcbind"/> > - <package name="rpm"/> > - <package name="rsyslog"/> > - <package name="sysconfig"/> > - <package name="systemd-sysvinit"/> > - <package name="timezone"/> > - <package name="u-boot-tools"/> > - <package name="vim"/> > - <package name="wireless-tools"/> > - <package name="wpa_supplicant"/> > - <package name="openSUSE-build-key"/> > - <package name="yast2-firstboot"/> > -  > - <package name="yast2-users"/> > - <package name="zypper"/> > -  > - <archive name="uboot-setup.tgz" bootinclude="true"/> > - </packages> > + <packages type="bootstrap"><package name="kernel-tegra-ac100" bootinclude="true"/> > +abootimg See? Looks bogus, no? > +<package name="aaa_base"/> > +<package name="aaa_base-extras"/> > +<package name="branding-openSUSE"/> > +<package name="cracklib-dict-full"/> > +<package name="dhcpcd"/> > +<package name="elfutils"/> > +<package name="filesystem"/> > +<package name="glibc-locale"/> > +<package name="hwinfo"/> > +<package name="ifplugd"/> > +<package name="insserv"/> > +<package name="iputils"/> > +<package name="kbd"/> > +<package name="kernel-firmware"/> > +<package name="less"/> > +<package name="lvm2"/> > +<package name="mkinitrd"/> > +<package name="module-init-tools"/> > +<package name="ncurses-utils"/> > +<package name="netcfg"/> > + > +<package name="ntp"/> > +<package name="openssh"/> > +<package name="openSUSE-release"/> > +<package name="pkg-config"/> > +<package name="polkit"/> > +<package name="procps"/> > +<package name="pwdutils"/> > +<package name="plymouth"/> > +<package name="qemu-linux-user-arm" bootinclude="true"/> > +<package name="rpcbind"/> > +<package name="rpm"/> > +<package name="rsyslog"/> > +<package name="sysconfig"/> > +<package name="systemd-sysvinit"/> > +<package name="timezone"/> > +<package name="u-boot-tools"/> > +<package name="vim"/> > +<package name="wireless-tools"/> > +<package name="wpa_supplicant"/> > +<package name="openSUSE-build-key"/> > +<package name="yast2-firstboot"/> > + > +<package name="yast2-users"/> > +<package name="zypper"/> > + > + <archive name="uboot-setup.tgz" bootinclude="true"/> > + </packages> > <packages type="delete"> > <!-- not needed at runtime, but removing would happen too early > <package name="qemu-linux-user-arm" /> > > ++++++ XFCE-ac100.kiwi > --- XFCE-ac100.kiwi > +++ XFCE-ac100.kiwi > @@ -1,5 +1,5 @@ > <?xml version="1.0" encoding="utf-8"?> > -<image schemaversion="5.5" name="openSUSE-12.2-ARM-XFCE-ac100"> > +<image schemaversion="5.5" name="openSUSE-12.2-ARM-XFCE-rootfs"> Oh? What happened here? Alex > <!-- > ***************************************************************************** > ***************************************************************************** > @@ -13,7 +13,7 @@ > <author>Marcus Schäfer</author> > <contact>ms(a)novell.com</contact> > <specification> > - openSUSE 12.2 XFCE image for ARM (ac100) boards > + openSUSE 12.2 XFCE image for ARM (rootfs) boards > </specification> > </description> > <preferences> > > > To REVIEW against the previous version: > osc request show --diff 139668 > > To ACCEPT the request: > osc request accept 139668 --message="reviewed ok." > > To DECLINE the request: > osc request decline 139668 --message="declined for reason xyz (see ... for background / policy / ...)." > > To REVOKE the request: > osc request revoke 139668 --message="retracted because ..., sorry / thx / see better version ..." > -- > Hermes messaging (http://hermes.opensuse.org) > openSUSE Build Service (https://build.opensuse.org/) > Collaboration: http://en.opensuse.org/Build_Service/Collaboration > > -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] Re: [obs submit-request 139673] openSUSE:12.2:ARM/JeOS: created by Guillaume_G
by Alexander Graf 29 Oct '12

29 Oct '12

On 29.10.2012, at 15:30, <guillaume.gardet(a)opensuse.org> wrote: > > > home:Guillaume_G:branches:openSUSE:12.2:ARM/JeOS -> openSUSE:12.2:ARM/JeOS > > > https://build.opensuse.org/request/show/139673 > > Description: * Fix /etc/sysconfig/windowmanager hack to get XFCE as default > * Boot in runlevel 5 (gfx mode) instead of 3 (default) > > ++++++ config.sh > --- config.sh > +++ config.sh > @@ -88,8 +88,26 @@ > #-------------------------------------- > # XXX only do for XFCE image types > if [ -e /etc/sysconfig/displaymanager ]; then > - sed -i 's/^DISPLAYMANAGER=.*/DISPLAYMANAGER="lightdm"' /etc/sysconfig/displaymanager > - sed -i 's/^DEFAULT_WM=.*/DEFAULT_WM="xfce"' /etc/sysconfig/windowmanager > + baseUpdateSysConfig /etc/sysconfig/displaymanager DISPLAYMANAGER lightdm > +# baseUpdateSysConfig is working only on existing vars and DEFAULT_WM is not always defined, so test if exist In which case is it not defined? Can we assume that any case we care about it is defined? If so, we can just shove it into another if [ -e /etc/sysconfig/windowmanager ] && ! grep -q DEFAULT_WM /etc/sysconfig/windowsmanager; then ... block > + grep_result=$(grep DEFAULT_WM /etc/sysconfig/windowmanager) > + if [ "$grep_result" == "" ]; then > + echo ' Better use the EOF variant used in other spots in this file. I'm not sure we really need this path though. Please verify. > +## Path: Desktop/Window manager > +## Description: > +## Type: string(gnome,kde4,kde,lxde,xfce,twm,icewm) > +## Default: xfce > +## Config: profiles,kde,susewm > +# > +# Here you can set the default window manager (kde, fvwm, ...) > +# changes here require at least a re-login > +DEFAULT_WM="xfce"' >> /etc/sysconfig/windowmanager > + else > + baseUpdateSysConfig /etc/sysconfig/windowmanager DEFAULT_WM xfce > + fi > +# We want to start in gfx mode Wrong indent :) > + baseSetRunlevel 5 > + suseConfig Do we need this really? Alex > fi > > #====================================== > > > To REVIEW against the previous version: > osc request show --diff 139673 > > To ACCEPT the request: > osc request accept 139673 --message="reviewed ok." > > To DECLINE the request: > osc request decline 139673 --message="declined for reason xyz (see ... for background / policy / ...)." > > To REVOKE the request: > osc request revoke 139673 --message="retracted because ..., sorry / thx / see better version ..." > -- > Hermes messaging (http://hermes.opensuse.org) > openSUSE Build Service (https://build.opensuse.org/) > Collaboration: http://en.opensuse.org/Build_Service/Collaboration > > -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 7

[opensuse-arm] armv5 build broken - please rebuild qemu packages
by Guillaume Gardet 29 Oct '12

29 Oct '12

Hi, In my OBS home repo I get this error during armv5 environment setup: file /usr/bin/qemu-arm-binfmt from install of qemu-accel-armv5tel-0.2-21.1.x86_64 conflicts with file from package qemu-linux-user-1.2.0-138.4.x86_64 Same with a local build. To fix it it seems that a rebuild of qemu (for qemu-linux-user package) is needed. I did it in local repo and this error is fixed. So, please trigger a rebuild of qemu. But I get another error: ARCHITECTURE PERSONALITY IS UNKNOWN. Log: [ 27s] booting XEN kernel ... [ 27s] xm create -c /var/tmp/build.xen.conf-hxGya4ErF name=build_2 disk=phy:/dev/dm-2,hda1,w disk=phy:/dev/dm-3,hda2,w extra=quiet init=/.build/initvm elevator=noop panic=1 console=ttyS0 [ 32s] Using config file "/var/tmp/build.xen.conf-hxGya4ErF". [ 32s] Started domain build_2 (id=26220) [ 32s] [ 0.260031] PCI: Fatal: No config space access function found [ 32s] [ 0.264046] Unable to read sysrq code in control/sysrq [ 32s] [ 0.367346] i8042: No controller found [ 32s] [ 0.369526] /home/abuild/rpmbuild/BUILD/kernel-xen-3.4.6/linux-3.4/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 32s] doing fast boot [ 33s] FATAL: Module kqemu not found. [ 33s] FATAL: Module ext2 not found. [ 33s] Creating device nodes with udev [ 34s] Waiting for device /dev/hda1 to appear: ok [ 34s] fsck from util-linux 2.21.2 [ 34s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/hda1 [ 34s] /dev/hda1: clean, 3618/897600 files, 161407/3584000 blocks [ 34s] fsck succeeded. Mounting root device read-only. [ 34s] Mounting root /dev/hda1 [ 34s] mount -o ro,defaults -t ext4 /dev/hda1 /root [ 1028s] ARCHITECTURE PERSONALITY IS UNKNOWN Any idea why? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 4