Thanks for the suggestions. I will try these today or tomorrow and post the results. FYI, the NIC is onboard, and roughly close to the AMI RAID card. I'll also try my test with the built-in 100mb nic, which is further away from the RAID card. thanks, Kevin On Wednesday, June 2, 2004, at 10:34 AM, Manfred Knick wrote:
Am Wednesday 02 June 2004 01:04 schrieb Manfred Knick:
Sorry, Kevin, I apologize, seems it was too late tonight:
let some fans blow fresh cool air in between your cards (esp. Graphic correction: network , not Graphic and SCSI), memory sticks and onto the typical intense areas on your Tyan MoBo, --> do you use an on-board-network controller? and try your "Gigabit-Copy" again. Still the same behaviour?
Background: I had similar intermitting problems some years ago with an Onboard-Adaptec-Chip which was placed more or less below the PCI cards on that MoBo series; and additionally, being the lowest slot, the 3COM was shielded from air-flow by the parallel EIDE cables ;-( One slow-running fan blowing in-between the slots + carefully re-placing the broad parallel cables solved all those problems :-))
If yes still: I guess you have already checked the memory comptibility aspect? (See lots of corresponding articles earlier in this list.)
Looking forward to hearing your results! - Manfred
-- Manfred Knick (Dipl.-Math.) Alramstr. 31, D-81371 München Telefon +49 (89) 76704-300 Telefax +49 (89) 76704-453 Mobil +49 (171) 4180 358
-- Check the List-Unsubscribe header to unsubscribe For additional commands, email: suse-amd64-help@suse.com
________________ Kevin Lewandowski Discogs - http://www.discogs.com