January 2013 - openSUSE Virtual - openSUSE Mailing Lists

[opensuse-virtual] usbredirection auto reconnect, nokia pc suite (works except for firmware updates)
by Rob Verduijn 19 Jan '13

19 Jan '13

Hello, After some strugle I've managed to connet my local nokia phone via usbredirect to a remote virtual Windoze machine running on kvm. It works fine except for the firmware updates. (it even connects and synchronises to the pc suite) For some reason nokia has decided it is a sweet trick to reset the usb connection at some point while they do the update. The phone whitches off after they do this (not bricked so nothing the power switch can't deal with) After which the update fails and sometimes even the spicy session hangs. Turning on autoconnect plugged in usb devices doesn't work, adding a total of 4 usb channels doesn't work either. Anybody have any idea where to look for a solution ? Regards Rob p.s. my ereaders (kobo-touch/glo) now work via usb redirection as well, the kobo software happely connects and synchronises :P -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-virtual+owner(a)opensuse.org

1 0

[opensuse-virtual] how to know one domain is defined or not
by lei yang 17 Jan '13

17 Jan '13

Hi experts I want to write a script to determine one domain named "vm1" is defined or not, if defined, I will undefine it. The question is how could I know it define or not ? Lei -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-virtual+owner(a)opensuse.org

2 2

[opensuse-virtual] drive with bus=0, unit=0 (index=0) exists
by Tony Su 14 Jan '13

14 Jan '13

Launching a pre-built QEMU ARM image following the instructions at https://en.opensuse.org/HCL:VersatileExpress Reviewing: Downloaded the disk image, extracted, grew it to 20GB Downloaded the kernel archive, extracted to same folder holding the prepared disk image. Executed the following command from within the folder holding these files, which returns as follows # qemu-system-arm -M vexpress-a9 -m 1G -drive file=openSUSE-12.2-ARM-XFCE-vexpress.armv7l.raw, if=sd -serial stdio -kernel initrd*kernel -initrd initrd*h.gz -append console=tty qemu-system-arm: -drive file=openSUSE-12.2-ARM-XFCE-vexpress.armv7l.raw,: drive with bus=0, unit=0 (index=0) exists Not sure what I'm doing wrong and the error perplexes me... No other VM is running but of course the drive should already exist if I'm pointing to an existing disk image file. I probably am misunderstanding something... TIA, Tony -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-virtual+owner(a)opensuse.org

1 1

[opensuse-virtual] Re: [Qemu-discuss] what's the difference between qemu-system-i386 and qemu-system_x86_64
by lei yang 14 Jan '13

14 Jan '13

So I would like to ask : when use qemu-system-i386 and when use qemu-system-x86_64? Lei On Mon, Jan 14, 2013 at 2:18 AM, Tony Su <tonysu(a)su-networking.com> wrote: > Is the nature of x64, the architecture is an extension of the original x86 > instructionset. But, among other things the x386 lacked were cpu graphics > extensions. > > So, the x386 environment is different. > > TSU > > On Jan 13, 2013 5:41 AM, "lei yang" <yanglei.fage(a)gmail.com> wrote: >> >> On Sat, Jan 12, 2013 at 7:25 PM, John Floren <john(a)jfloren.net> wrote: >> > The first emulates a 32-bit i386, the second emulates a 64-bit x86-64. >> > As >> > per the filenames. >> > >> >> But on my ubuntu(32bit), it still can use qemu-system-x86_64 emulate >> for 32 bit guest >> >> So I think qemu-syste-i386 is redundant >> >> Lei >> >> >> > On Jan 12, 2013 7:22 PM, "lei yang" <yanglei.fage(a)gmail.com> wrote: >> >> >> >> Hi experts. >> >> >> >> As the title >> >> >> >> Lei >> >> >> > >> > -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-virtual+owner(a)opensuse.org

1 0

[opensuse-virtual] Re: [Qemu-discuss] what's the difference between qemu-system-i386 and qemu-system_x86_64
by lei yang 13 Jan '13

13 Jan '13

On Sat, Jan 12, 2013 at 7:25 PM, John Floren <john(a)jfloren.net> wrote: > The first emulates a 32-bit i386, the second emulates a 64-bit x86-64. As > per the filenames. > But on my ubuntu(32bit), it still can use qemu-system-x86_64 emulate for 32 bit guest So I think qemu-syste-i386 is redundant Lei > On Jan 12, 2013 7:22 PM, "lei yang" <yanglei.fage(a)gmail.com> wrote: >> >> Hi experts. >> >> As the title >> >> Lei >> > -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-virtual+owner(a)opensuse.org

1 0

[opensuse-virtual] what's the difference between qemu-system-i386 and qemu-system_x86_64
by lei yang 13 Jan '13

13 Jan '13

Hi experts. As the title Lei -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-virtual+owner(a)opensuse.org

1 0

[opensuse-virtual] opensuse-virtual@opensuse.org
by lei yang 09 Jan '13

09 Jan '13

subscribe opensuse-virtual -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-virtual+owner(a)opensuse.org

1 0

[opensuse-virtual] opensuse-virtual@opensuse.org
by lei yang 09 Jan '13

09 Jan '13

subscribe opensuse-virtual(a)opensuse.org -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-virtual+owner(a)opensuse.org

1 0

[opensuse-virtual] can't find xen-kmp-default source rpm
by Jun Hu 09 Jan '13

09 Jan '13

Hi guys: I want to find xen-kmp-default source rpm , but can't find at http://download.opensuse.org/update/12.2/src/ why? junwork:/usr/src/packages/SPECS # zypper info xen-kmp-default Loading repository data... Reading installed packages... Information for package xen-kmp-default: Repository: openSUSE-12.2-Update Name: xen-kmp-default Version: 4.1.3_06_k3.4.11_2.16-5.17.1 Arch: x86_64 Vendor: openSUSE Installed: Yes Status: up-to-date Installed Size: 308.8 KiB Summary: Xen para-virtual device drivers for fully virtualized guests -- ------------------------------ Jun Hu DSE In Suse China. ------------------------------ -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-virtual+owner(a)opensuse.org

3 3

[opensuse-virtual] xen vm can't autoboot because of bridge hasn't been set up.
by Jun Hu 05 Jan '13

05 Jan '13

Hi Guys: I found an issue that xen vm can't autoboot because of bridge hasn't set up, i can manually boot the vm . maybe a bug? junwork:/etc/libvirt/qemu # chkconfig -A --list | grep xen Note: This output shows SysV services only and does not include native systemd services. SysV configuration data might be overridden by native systemd configuration. xen-watchdog 0:off 1:off 2:off 3:off 4:off 5:off 6:off xencommons 0:off 1:off 2:on 3:on 4:off 5:on 6:off xend 0:off 1:off 2:off 3:on 4:off 5:on 6:off xendomains 0:off 1:off 2:off 3:on 4:off 5:on 6:off junwork:~ # rcxend status redirecting to systemctl xend.service - LSB: Starts and stops the Xen management daemon Loaded: loaded (/etc/init.d/xend) Active: active (running) since Fri, 04 Jan 2013 06:41:11 +0800; 1h 14min ago Process: 659 ExecStart=/etc/init.d/xend start (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/xend.service ├ 737 /usr/bin/python /usr/sbin/xend start ├ 738 blktapctrl └ 740 /usr/bin/python /usr/sbin/xend start Jan 04 06:41:11 junwork xend[659]: Starting xend ..done junwork:/etc/libvirt/qemu # rcxendomains status redirecting to systemctl xendomains.service - LSB: Starts and stops Xen VMs Loaded: loaded (/etc/init.d/xendomains) Active: failed (Result: exit-code) since Fri, 04 Jan 2013 06:41:31 +0800; 1h 20min ago Process: 1323 ExecStart=/etc/init.d/xendomains start (code=exited, status=1/FAILURE) CGroup: name=systemd:/system/xendomains.service Jan 04 06:41:11 junwork xendomains[1323]: Restoring saved Xen domains Jan 04 06:41:29 junwork xendomains[1323]: windowsxp: ..failed Jan 04 06:41:29 junwork xendomains[1323]: Starting auto Xen domains Jan 04 06:41:31 junwork xendomains[1323]: config_winxp: Error: Device 0 (vif) could not be connected. Could not find ...ce br0 Jan 04 06:41:31 junwork xendomains[1323]: ..failed junwork:/etc/libvirt/qemu # ifconfig br0 Link encap:Ethernet HWaddr 00:1F:16:25:AA:66 inet addr:192.168.5.20 Bcast:192.168.5.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) eth0 Link encap:Ethernet HWaddr 00:1F:16:25:AA:66 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:20 Memory:f2600000-f2620000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1212 (1.1 Kb) TX bytes:1212 (1.1 Kb) wlan0 Link encap:Ethernet HWaddr 00:1E:65:6E:90:AE inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:65ff:fe6e:90ae/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6695 errors:0 dropped:0 overruns:0 frame:0 TX packets:5897 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3861362 (3.6 Mb) TX bytes:1266239 (1.2 Mb) junwork:/etc/xen/auto # cat config_winxp name="windowsxp" description="ip_192.168.10.55" uuid="d090b5fe-c5e2-e8fd-6720-a49d5debb94c" memory=512 maxmem=512 vcpus=2 on_poweroff="destroy" on_reboot="restart" on_crash="destroy" localtime=1 keymap="en-us" builder="hvm" device_model="/usr/lib/xen/bin/qemu-dm" kernel="/usr/lib/xen/boot/hvmloader" boot="c" disk=[ 'file:/xendisk/xen_vms/winxp/winxp.img,hda,w', ] vif=[ 'mac=00:16:3e:63:af:b9,bridge=br0,model=rtl8139', # 'mac=00:16:3e:13:63:2b,bridge=br1,model=rtl8139', ] ##ip=192.168.5.221 stdvga=0 vnc=1 vncunused=1 extid=0 usb=1 acpi=1 pae=1 usbdevice='tablet' serial="pty" -- To unsubscribe, e-mail: opensuse-virtual+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-virtual+owner(a)opensuse.org

2 3