[uyuni-users] RE: Upgrade openSUSE Leap - ARCHIVED: Uyuni Users - openSUSE Mailing Lists

newer
[uyuni-users] Uyuni Community...

[uyuni-users] RE: Upgrade openSUSE Leap

older
[uyuni-users] Clients not showing...

Haupt, Torsten

15 Sep 2020 15 Sep '20

07:01

Hi, I tried it, but in the GUI I can't change the base channel to openSUSE Leap 15.2. In the dialog under SUSE-channels openSUSE Leap 15.1 is activated and under custom channels I see CentOS. I can't choose other base channels. And yes, there is an openSUSE 15.2 channel, created in the GUI, under admin | products. This channel is also synchronized. But I can't choose it as new base channel for the system. Torsten

-----Original Message----- From: Flores, Javier-GMZ [mailto:Javier.Flores@gmz.migros.ch] Sent: Tuesday, September 15, 2020 8:33 AM To: Haupt, Torsten Subject: [EXTERN] AW: Upgrade openSUSE Leap

Hi

I usually first update to the latest packages of the current release, then attach the channels of the new release and simply run "zypper dist-upgrade" on the client.

Regards, Javier

-----Ursprüngliche Nachricht----- Von: Haupt, Torsten Gesendet: Tuesday, September 15, 2020 7:00 AM An: uyuni-users@opensuse.org Betreff: [uyuni-users] Upgrade openSUSE Leap

Hi,

what is the right way to upgrade openSUSE Leap 15.1 to 15.2 using Uyuni? I mean a client, not the Uyuni server.

Torsten -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org

Reply

Sign in to reply online Use email software

Show replies by date

Robert Paschedag

15 Sep 15 Sep

08:46

Not sure, but maybe the leap15.2 channel is another architecture than the leap15.1 channel your system is currently using. Robert ⁣sent from my mobile device -------- Originale Nachricht -------- Von: "Haupt, Torsten" Gesendet: Tue Sep 15 09:01:39 GMT+02:00 2020 An: "Flores, Javier-GMZ" Cc: "uyuni-users@opensuse.org" Betreff: [uyuni-users] RE: Upgrade openSUSE Leap Hi, I tried it, but in the GUI I can't change the base channel to openSUSE Leap 15.2. In the dialog under SUSE-channels openSUSE Leap 15.1 is activated and under custom channels I see CentOS. I can't choose other base channels. And yes, there is an openSUSE 15.2 channel, created in the GUI, under admin | products. This channel is also synchronized. But I can't choose it as new base channel for the system. Torsten

-----Original Message----- From: Flores, Javier-GMZ [mailto:Javier.Flores@gmz.migros.ch] Sent: Tuesday, September 15, 2020 8:33 AM To: Haupt, Torsten Subject: [EXTERN] AW: Upgrade openSUSE Leap

Hi

I usually first update to the latest packages of the current release, then attach the channels of the new release and simply run "zypper dist-upgrade" on the client.

Regards, Javier

-----Ursprüngliche Nachricht----- Von: Haupt, Torsten Gesendet: Tuesday, September 15, 2020 7:00 AM An: uyuni-users@opensuse.org Betreff: [uyuni-users] Upgrade openSUSE Leap

Hi,

what is the right way to upgrade openSUSE Leap 15.1 to 15.2 using Uyuni? I mean a client, not the Uyuni server.

Torsten -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org

Reply

Sign in to reply online Use email software

Haupt, Torsten

09:07

Hi, no, both are x86_64. And both channels were created as SUSE product; not through spacewalk-common-channels. Torsten

-----Original Message----- From: Robert Paschedag [mailto:robert.paschedag@web.de] Sent: Tuesday, September 15, 2020 10:47 AM To: Haupt, Torsten Cc: javier.flores@gmz.migros.ch; uyuni-users@opensuse.org Subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Not sure, but maybe the leap15.2 channel is another architecture than the leap15.1 channel your system is currently using.

Robert

⁣sent from my mobile device

-------- Originale Nachricht -------- Von: "Haupt, Torsten" Gesendet: Tue Sep 15 09:01:39 GMT+02:00 2020 An: "Flores, Javier-GMZ" Cc: "uyuni-users@opensuse.org" Betreff: [uyuni-users] RE: Upgrade openSUSE Leap

Hi,

I tried it, but in the GUI I can't change the base channel to openSUSE Leap 15.2. In the dialog under SUSE-channels openSUSE Leap 15.1 is activated and under custom channels I see CentOS. I can't choose other base channels. And yes, there is an openSUSE 15.2 channel, created in the GUI, under admin | products. This channel is also synchronized. But I can't choose it as new base channel for the system.

Torsten

...
-----Original Message----- From: Flores, Javier-GMZ [mailto:Javier.Flores@gmz.migros.ch] Sent: Tuesday, September 15, 2020 8:33 AM To: Haupt, Torsten Subject: [EXTERN] AW: Upgrade openSUSE Leap

Hi

I usually first update to the latest packages of the current release, then attach the channels of the new release and simply run "zypper dist-upgrade" on the client.

Regards, Javier

-----Ursprüngliche Nachricht----- Von: Haupt, Torsten Gesendet: Tuesday, September 15, 2020 7:00 AM An: uyuni-users@opensuse.org Betreff: [uyuni-users] Upgrade openSUSE Leap

Hi,

what is the right way to upgrade openSUSE Leap 15.1 to 15.2 using Uyuni? I mean a client, not the Uyuni server.

Torsten -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org

Reply

Sign in to reply online Use email software

Len Ewen

10:46

SInce it is a service pack, you may not be able to do it through Uyuni. You might be able to script it, but here is the guide I used. https://www.cyberciti.biz/faq/how-to-upgrade-opensuse-15-1-to-15-2-using-the... --------------- Len Ewen Systems Administrator 1 Information Technology University of Indianapolis (317) 788-3362 [image: UIndyIT.jpg] Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal. On Tue, Sep 15, 2020 at 5:07 AM Haupt, Torsten < Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote:

Hi,

no, both are x86_64. And both channels were created as SUSE product; not through spacewalk-common-channels.

Torsten

...
-----Original Message----- From: Robert Paschedag [mailto:robert.paschedag@web.de] Sent: Tuesday, September 15, 2020 10:47 AM To: Haupt, Torsten Cc: javier.flores@gmz.migros.ch; uyuni-users@opensuse.org Subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Not sure, but maybe the leap15.2 channel is another architecture than the leap15.1 channel your system is currently using.

Robert

⁣sent from my mobile device

-------- Originale Nachricht -------- Von: "Haupt, Torsten" Gesendet: Tue Sep 15 09:01:39 GMT+02:00 2020 An: "Flores, Javier-GMZ" Cc: "uyuni-users@opensuse.org" Betreff: [uyuni-users] RE: Upgrade openSUSE Leap

Hi,

I tried it, but in the GUI I can't change the base channel to openSUSE Leap 15.2. In the dialog under SUSE-channels openSUSE Leap 15.1 is activated and under custom channels I see CentOS. I can't choose other base channels. And yes, there is an openSUSE 15.2 channel, created in the GUI, under admin | products. This channel is also synchronized. But I can't choose it as new base channel for the system.

Torsten

...
-----Original Message----- From: Flores, Javier-GMZ [mailto:Javier.Flores@gmz.migros.ch] Sent: Tuesday, September 15, 2020 8:33 AM To: Haupt, Torsten Subject: [EXTERN] AW: Upgrade openSUSE Leap

Hi

I usually first update to the latest packages of the current release, then attach the channels of the new release and simply run "zypper dist-upgrade" on the client.

Regards, Javier

-----Ursprüngliche Nachricht----- Von: Haupt, Torsten Gesendet: Tuesday, September 15, 2020 7:00 AM An: uyuni-users@opensuse.org Betreff: [uyuni-users] Upgrade openSUSE Leap

Hi,

what is the right way to upgrade openSUSE Leap 15.1 to 15.2 using Uyuni? I mean a client, not the Uyuni server.

Torsten -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org

Reply

Sign in to reply online Use email software

Haupt, Torsten

11:46

New subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Hi, okay, no problem to update the server through the cli on the server. But at the end I have to change the base channel in Uyuni … and I can’t. Or must I re-register the server after the update? But at the moment all repos point to the uyuni server. So I have to disable them and reactivate the original repos, which point to the internet? Torsten From: Len Ewen [mailto:ewenf@uindy.edu] Sent: Tuesday, September 15, 2020 12:46 PM To: uyuni-users@opensuse.org Subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap SInce it is a service pack, you may not be able to do it through Uyuni. You might be able to script it, but here is the guide I used. https://www.cyberciti.biz/faq/how-to-upgrade-opensuse-15-1-to-15-2-using-the... --------------- Len Ewen Systems Administrator 1 Information Technology University of Indianapolis (317) 788-3362 [Das Bild wurde vom Absender entfernt. UIndyIT.jpg] Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal. On Tue, Sep 15, 2020 at 5:07 AM Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote: Hi, no, both are x86_64. And both channels were created as SUSE product; not through spacewalk-common-channels. Torsten

-----Original Message----- From: Robert Paschedag [mailto:robert.paschedag@web.demailto:robert.paschedag@web.de] Sent: Tuesday, September 15, 2020 10:47 AM To: Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> Cc: javier.flores@gmz.migros.chmailto:javier.flores@gmz.migros.ch; uyuni-users@opensuse.orgmailto:uyuni-users@opensuse.org Subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Not sure, but maybe the leap15.2 channel is another architecture than the leap15.1 channel your system is currently using.

Robert

⁣sent from my mobile device

-------- Originale Nachricht -------- Von: "Haupt, Torsten" mailto:torsten.haupt@lhw.mlu.sachsen-anhalt.de> Gesendet: Tue Sep 15 09:01:39 GMT+02:00 2020 An: "Flores, Javier-GMZ" mailto:javier.flores@gmz.migros.ch> Cc: "uyuni-users@opensuse.orgmailto:uyuni-users@opensuse.org" mailto:uyuni-users@opensuse.org> Betreff: [uyuni-users] RE: Upgrade openSUSE Leap

Hi,

I tried it, but in the GUI I can't change the base channel to openSUSE Leap 15.2. In the dialog under SUSE-channels openSUSE Leap 15.1 is activated and under custom channels I see CentOS. I can't choose other base channels. And yes, there is an openSUSE 15.2 channel, created in the GUI, under admin | products. This channel is also synchronized. But I can't choose it as new base channel for the system.

Torsten

...
-----Original Message----- From: Flores, Javier-GMZ [mailto:Javier.Flores@gmz.migros.chmailto:Javier.Flores@gmz.migros.ch] Sent: Tuesday, September 15, 2020 8:33 AM To: Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> Subject: [EXTERN] AW: Upgrade openSUSE Leap

Hi

I usually first update to the latest packages of the current release, then attach the channels of the new release and simply run "zypper dist-upgrade" on the client.

Regards, Javier

-----Ursprüngliche Nachricht----- Von: Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> Gesendet: Tuesday, September 15, 2020 7:00 AM An: uyuni-users@opensuse.orgmailto:uyuni-users@opensuse.org Betreff: [uyuni-users] Upgrade openSUSE Leap

Hi,

what is the right way to upgrade openSUSE Leap 15.1 to 15.2 using Uyuni? I mean a client, not the Uyuni server.

Torsten -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.orgmailto:uyuni-users%2Bunsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.orgmailto:uyuni-users%2Bowner@opensuse.org -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.orgmailto:uyuni-users%2Bunsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.orgmailto:uyuni-users%2Bowner@opensuse.org

Reply

Sign in to reply online Use email software

Len Ewen

11:59

New subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

I don't think upgrading the server will cause any issues with your registered clients. You upgrade the server, then you upgrade Uyuni to 2020.07, which has a set of instructions unto itself, and then you should be good to go. https://www.uyuni-project.org/uyuni-docs/uyuni/upgrade/upgrade-overview.html --------------- Len Ewen Systems Administrator 1 Information Technology University of Indianapolis (317) 788-3362 [image: UIndyIT.jpg] Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal. On Tue, Sep 15, 2020 at 7:46 AM Haupt, Torsten < Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote:

Hi,

okay, no problem to update the server through the cli on the server. But at the end I have to change the base channel in Uyuni … and I can’t.

Or must I re-register the server after the update?

But at the moment all repos point to the uyuni server. So I have to disable them and reactivate the original repos, which point to the internet?

Torsten

*From:* Len Ewen [mailto:ewenf@uindy.edu] *Sent:* Tuesday, September 15, 2020 12:46 PM *To:* uyuni-users@opensuse.org *Subject:* [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

SInce it is a service pack, you may not be able to do it through Uyuni. You might be able to script it, but here is the guide I used.

https://www.cyberciti.biz/faq/how-to-upgrade-opensuse-15-1-to-15-2-using-the...

---------------

*Len Ewen*

Systems Administrator 1

Information Technology

University of Indianapolis

(317) 788-3362

[image: Das Bild wurde vom Absender entfernt. UIndyIT.jpg]

*Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal.*

On Tue, Sep 15, 2020 at 5:07 AM Haupt, Torsten < Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote:

Hi,

no, both are x86_64. And both channels were created as SUSE product; not through spacewalk-common-channels.

Torsten

...
-----Original Message----- From: Robert Paschedag [mailto:robert.paschedag@web.de] Sent: Tuesday, September 15, 2020 10:47 AM To: Haupt, Torsten Cc: javier.flores@gmz.migros.ch; uyuni-users@opensuse.org Subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Not sure, but maybe the leap15.2 channel is another architecture than the leap15.1 channel your system is currently using.

Robert

⁣sent from my mobile device

-------- Originale Nachricht -------- Von: "Haupt, Torsten" Gesendet: Tue Sep 15 09:01:39 GMT+02:00 2020 An: "Flores, Javier-GMZ" Cc: "uyuni-users@opensuse.org" Betreff: [uyuni-users] RE: Upgrade openSUSE Leap

Hi,

I tried it, but in the GUI I can't change the base channel to openSUSE Leap 15.2. In the dialog under SUSE-channels openSUSE Leap 15.1 is activated and under custom channels I see CentOS. I can't choose other base channels. And yes, there is an openSUSE 15.2 channel, created in the GUI, under admin | products. This channel is also synchronized. But I can't choose it as new base channel for the system.

Torsten

...
-----Original Message----- From: Flores, Javier-GMZ [mailto:Javier.Flores@gmz.migros.ch] Sent: Tuesday, September 15, 2020 8:33 AM To: Haupt, Torsten Subject: [EXTERN] AW: Upgrade openSUSE Leap

Hi

I usually first update to the latest packages of the current release, then attach the channels of the new release and simply run "zypper dist-upgrade" on the client.

Regards, Javier

-----Ursprüngliche Nachricht----- Von: Haupt, Torsten Gesendet: Tuesday, September 15, 2020 7:00 AM An: uyuni-users@opensuse.org Betreff: [uyuni-users] Upgrade openSUSE Leap

Hi,

what is the right way to upgrade openSUSE Leap 15.1 to 15.2 using Uyuni? I mean a client, not the Uyuni server.

Torsten -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org

Reply

Sign in to reply online Use email software

Haupt, Torsten

12:04

New subject: [EXTERN] Re: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

No, stop. I wrote, that I want to update a client not the Uyuni server. The uyuni server ist already updated to openSUSE Leap 15.2, according to the published documentations. Now I want to update some registered clients. Torsten From: Len Ewen [mailto:ewenf@uindy.edu] Sent: Tuesday, September 15, 2020 2:00 PM To: uyuni-users@opensuse.org Subject: [EXTERN] Re: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap I don't think upgrading the server will cause any issues with your registered clients. You upgrade the server, then you upgrade Uyuni to 2020.07, which has a set of instructions unto itself, and then you should be good to go. https://www.uyuni-project.org/uyuni-docs/uyuni/upgrade/upgrade-overview.html --------------- Len Ewen Systems Administrator 1 Information Technology University of Indianapolis (317) 788-3362 [Das Bild wurde vom Absender entfernt. UIndyIT.jpg] Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal. On Tue, Sep 15, 2020 at 7:46 AM Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote: Hi, okay, no problem to update the server through the cli on the server. But at the end I have to change the base channel in Uyuni … and I can’t. Or must I re-register the server after the update? But at the moment all repos point to the uyuni server. So I have to disable them and reactivate the original repos, which point to the internet? Torsten From: Len Ewen [mailto:ewenf@uindy.edumailto:ewenf@uindy.edu] Sent: Tuesday, September 15, 2020 12:46 PM To: uyuni-users@opensuse.orgmailto:uyuni-users@opensuse.org Subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap SInce it is a service pack, you may not be able to do it through Uyuni. You might be able to script it, but here is the guide I used. https://www.cyberciti.biz/faq/how-to-upgrade-opensuse-15-1-to-15-2-using-the... --------------- Len Ewen Systems Administrator 1 Information Technology University of Indianapolis (317) 788-3362 [Das Bild wurde vom Absender entfernt. UIndyIT.jpg] Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal. On Tue, Sep 15, 2020 at 5:07 AM Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote: Hi, no, both are x86_64. And both channels were created as SUSE product; not through spacewalk-common-channels. Torsten

-----Original Message----- From: Robert Paschedag [mailto:robert.paschedag@web.demailto:robert.paschedag@web.de] Sent: Tuesday, September 15, 2020 10:47 AM To: Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> Cc: javier.flores@gmz.migros.chmailto:javier.flores@gmz.migros.ch; uyuni-users@opensuse.orgmailto:uyuni-users@opensuse.org Subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Not sure, but maybe the leap15.2 channel is another architecture than the leap15.1 channel your system is currently using.

Robert

⁣sent from my mobile device

-------- Originale Nachricht -------- Von: "Haupt, Torsten" mailto:torsten.haupt@lhw.mlu.sachsen-anhalt.de> Gesendet: Tue Sep 15 09:01:39 GMT+02:00 2020 An: "Flores, Javier-GMZ" mailto:javier.flores@gmz.migros.ch> Cc: "uyuni-users@opensuse.orgmailto:uyuni-users@opensuse.org" mailto:uyuni-users@opensuse.org> Betreff: [uyuni-users] RE: Upgrade openSUSE Leap

Hi,

I tried it, but in the GUI I can't change the base channel to openSUSE Leap 15.2. In the dialog under SUSE-channels openSUSE Leap 15.1 is activated and under custom channels I see CentOS. I can't choose other base channels. And yes, there is an openSUSE 15.2 channel, created in the GUI, under admin | products. This channel is also synchronized. But I can't choose it as new base channel for the system.

Torsten

...
-----Original Message----- From: Flores, Javier-GMZ [mailto:Javier.Flores@gmz.migros.chmailto:Javier.Flores@gmz.migros.ch] Sent: Tuesday, September 15, 2020 8:33 AM To: Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> Subject: [EXTERN] AW: Upgrade openSUSE Leap

Hi

I usually first update to the latest packages of the current release, then attach the channels of the new release and simply run "zypper dist-upgrade" on the client.

Regards, Javier

-----Ursprüngliche Nachricht----- Von: Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> Gesendet: Tuesday, September 15, 2020 7:00 AM An: uyuni-users@opensuse.orgmailto:uyuni-users@opensuse.org Betreff: [uyuni-users] Upgrade openSUSE Leap

Hi,

what is the right way to upgrade openSUSE Leap 15.1 to 15.2 using Uyuni? I mean a client, not the Uyuni server.

Torsten -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.orgmailto:uyuni-users%2Bunsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.orgmailto:uyuni-users%2Bowner@opensuse.org -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.orgmailto:uyuni-users%2Bunsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.orgmailto:uyuni-users%2Bowner@opensuse.org

Reply

Sign in to reply online Use email software

Len Ewen

12:10

New subject: [EXTERN] Re: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

https://www.uyuni-project.org/uyuni-docs/uyuni/upgrade/client-x.html --------------- Len Ewen Systems Administrator 1 Information Technology University of Indianapolis (317) 788-3362 [image: UIndyIT.jpg] Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal. On Tue, Sep 15, 2020 at 8:04 AM Haupt, Torsten < Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote:

No, stop. I wrote, that I want to update a client not the Uyuni server. The uyuni server ist already updated to openSUSE Leap 15.2, according to the published documentations.

Now I want to update some registered clients.

Torsten

*From:* Len Ewen [mailto:ewenf@uindy.edu] *Sent:* Tuesday, September 15, 2020 2:00 PM *To:* uyuni-users@opensuse.org *Subject:* [EXTERN] Re: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

I don't think upgrading the server will cause any issues with your registered clients. You upgrade the server, then you upgrade Uyuni to 2020.07, which has a set of instructions unto itself, and then you should be good to go.

https://www.uyuni-project.org/uyuni-docs/uyuni/upgrade/upgrade-overview.html

---------------

*Len Ewen*

Systems Administrator 1

Information Technology

University of Indianapolis

(317) 788-3362

[image: Das Bild wurde vom Absender entfernt. UIndyIT.jpg]

*Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal.*

On Tue, Sep 15, 2020 at 7:46 AM Haupt, Torsten < Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote:

Hi,

okay, no problem to update the server through the cli on the server. But at the end I have to change the base channel in Uyuni … and I can’t.

Or must I re-register the server after the update?

But at the moment all repos point to the uyuni server. So I have to disable them and reactivate the original repos, which point to the internet?

Torsten

*From:* Len Ewen [mailto:ewenf@uindy.edu] *Sent:* Tuesday, September 15, 2020 12:46 PM *To:* uyuni-users@opensuse.org *Subject:* [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

SInce it is a service pack, you may not be able to do it through Uyuni. You might be able to script it, but here is the guide I used.

https://www.cyberciti.biz/faq/how-to-upgrade-opensuse-15-1-to-15-2-using-the...

---------------

*Len Ewen*

Systems Administrator 1

Information Technology

University of Indianapolis

(317) 788-3362

[image: Das Bild wurde vom Absender entfernt. UIndyIT.jpg]

*Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal.*

On Tue, Sep 15, 2020 at 5:07 AM Haupt, Torsten < Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote:

Hi,

no, both are x86_64. And both channels were created as SUSE product; not through spacewalk-common-channels.

Torsten

...
-----Original Message----- From: Robert Paschedag [mailto:robert.paschedag@web.de] Sent: Tuesday, September 15, 2020 10:47 AM To: Haupt, Torsten Cc: javier.flores@gmz.migros.ch; uyuni-users@opensuse.org Subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Not sure, but maybe the leap15.2 channel is another architecture than the leap15.1 channel your system is currently using.

Robert

⁣sent from my mobile device

-------- Originale Nachricht -------- Von: "Haupt, Torsten" Gesendet: Tue Sep 15 09:01:39 GMT+02:00 2020 An: "Flores, Javier-GMZ" Cc: "uyuni-users@opensuse.org" Betreff: [uyuni-users] RE: Upgrade openSUSE Leap

Hi,

I tried it, but in the GUI I can't change the base channel to openSUSE Leap 15.2. In the dialog under SUSE-channels openSUSE Leap 15.1 is activated and under custom channels I see CentOS. I can't choose other base channels. And yes, there is an openSUSE 15.2 channel, created in the GUI, under admin | products. This channel is also synchronized. But I can't choose it as new base channel for the system.

Torsten

...
-----Original Message----- From: Flores, Javier-GMZ [mailto:Javier.Flores@gmz.migros.ch] Sent: Tuesday, September 15, 2020 8:33 AM To: Haupt, Torsten Subject: [EXTERN] AW: Upgrade openSUSE Leap

Hi

I usually first update to the latest packages of the current release, then attach the channels of the new release and simply run "zypper dist-upgrade" on the client.

Regards, Javier

-----Ursprüngliche Nachricht----- Von: Haupt, Torsten Gesendet: Tuesday, September 15, 2020 7:00 AM An: uyuni-users@opensuse.org Betreff: [uyuni-users] Upgrade openSUSE Leap

Hi,

what is the right way to upgrade openSUSE Leap 15.1 to 15.2 using Uyuni? I mean a client, not the Uyuni server.

Torsten -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org

Reply

Sign in to reply online Use email software

Haupt, Torsten

12:42

New subject: [EXTERN] Re: [EXTERN] Re: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Okay, this decribes the upgrade from SLES12 to SLES15SP2. It’s the same for openSUSE Leap clients? To update vom 15.1 to 15.2? That’s too much for a few clients. I will update the clients on the cli by changing the repos. This was my first plan, too. The orignal question was, how to change the base channel in the gui. I have no option to select the base channel for Leap 15.2. So I have to re-register them with a new activation key. Torsten From: Len Ewen [mailto:ewenf@uindy.edu] Sent: Tuesday, September 15, 2020 2:10 PM To: uyuni-users@opensuse.org Subject: [EXTERN] Re: [EXTERN] Re: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap https://www.uyuni-project.org/uyuni-docs/uyuni/upgrade/client-x.html --------------- Len Ewen Systems Administrator 1 Information Technology University of Indianapolis (317) 788-3362 [UIndyIT.jpg] Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal. On Tue, Sep 15, 2020 at 8:04 AM Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote: No, stop. I wrote, that I want to update a client not the Uyuni server. The uyuni server ist already updated to openSUSE Leap 15.2, according to the published documentations. Now I want to update some registered clients. Torsten From: Len Ewen [mailto:ewenf@uindy.edumailto:ewenf@uindy.edu] Sent: Tuesday, September 15, 2020 2:00 PM To: uyuni-users@opensuse.orgmailto:uyuni-users@opensuse.org Subject: [EXTERN] Re: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap I don't think upgrading the server will cause any issues with your registered clients. You upgrade the server, then you upgrade Uyuni to 2020.07, which has a set of instructions unto itself, and then you should be good to go. https://www.uyuni-project.org/uyuni-docs/uyuni/upgrade/upgrade-overview.html --------------- Len Ewen Systems Administrator 1 Information Technology University of Indianapolis (317) 788-3362 [Das Bild wurde vom Absender entfernt. UIndyIT.jpg] Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal. On Tue, Sep 15, 2020 at 7:46 AM Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote: Hi, okay, no problem to update the server through the cli on the server. But at the end I have to change the base channel in Uyuni … and I can’t. Or must I re-register the server after the update? But at the moment all repos point to the uyuni server. So I have to disable them and reactivate the original repos, which point to the internet? Torsten From: Len Ewen [mailto:ewenf@uindy.edumailto:ewenf@uindy.edu] Sent: Tuesday, September 15, 2020 12:46 PM To: uyuni-users@opensuse.orgmailto:uyuni-users@opensuse.org Subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap SInce it is a service pack, you may not be able to do it through Uyuni. You might be able to script it, but here is the guide I used. https://www.cyberciti.biz/faq/how-to-upgrade-opensuse-15-1-to-15-2-using-the... --------------- Len Ewen Systems Administrator 1 Information Technology University of Indianapolis (317) 788-3362 [Das Bild wurde vom Absender entfernt. UIndyIT.jpg] Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal. On Tue, Sep 15, 2020 at 5:07 AM Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote: Hi, no, both are x86_64. And both channels were created as SUSE product; not through spacewalk-common-channels. Torsten

-----Original Message----- From: Robert Paschedag [mailto:robert.paschedag@web.demailto:robert.paschedag@web.de] Sent: Tuesday, September 15, 2020 10:47 AM To: Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> Cc: javier.flores@gmz.migros.chmailto:javier.flores@gmz.migros.ch; uyuni-users@opensuse.orgmailto:uyuni-users@opensuse.org Subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Not sure, but maybe the leap15.2 channel is another architecture than the leap15.1 channel your system is currently using.

Robert

⁣sent from my mobile device

-------- Originale Nachricht -------- Von: "Haupt, Torsten" mailto:torsten.haupt@lhw.mlu.sachsen-anhalt.de> Gesendet: Tue Sep 15 09:01:39 GMT+02:00 2020 An: "Flores, Javier-GMZ" mailto:javier.flores@gmz.migros.ch> Cc: "uyuni-users@opensuse.orgmailto:uyuni-users@opensuse.org" mailto:uyuni-users@opensuse.org> Betreff: [uyuni-users] RE: Upgrade openSUSE Leap

Hi,

I tried it, but in the GUI I can't change the base channel to openSUSE Leap 15.2. In the dialog under SUSE-channels openSUSE Leap 15.1 is activated and under custom channels I see CentOS. I can't choose other base channels. And yes, there is an openSUSE 15.2 channel, created in the GUI, under admin | products. This channel is also synchronized. But I can't choose it as new base channel for the system.

Torsten

...
-----Original Message----- From: Flores, Javier-GMZ [mailto:Javier.Flores@gmz.migros.chmailto:Javier.Flores@gmz.migros.ch] Sent: Tuesday, September 15, 2020 8:33 AM To: Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> Subject: [EXTERN] AW: Upgrade openSUSE Leap

Hi

I usually first update to the latest packages of the current release, then attach the channels of the new release and simply run "zypper dist-upgrade" on the client.

Regards, Javier

-----Ursprüngliche Nachricht----- Von: Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> Gesendet: Tuesday, September 15, 2020 7:00 AM An: uyuni-users@opensuse.orgmailto:uyuni-users@opensuse.org Betreff: [uyuni-users] Upgrade openSUSE Leap

Hi,

what is the right way to upgrade openSUSE Leap 15.1 to 15.2 using Uyuni? I mean a client, not the Uyuni server.

Torsten -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.orgmailto:uyuni-users%2Bunsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.orgmailto:uyuni-users%2Bowner@opensuse.org -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.orgmailto:uyuni-users%2Bunsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.orgmailto:uyuni-users%2Bowner@opensuse.org

Reply

Sign in to reply online Use email software

Len Ewen

13:03

New subject: [EXTERN] Re: [EXTERN] Re: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Out of my depth now. I've got Centos and Oracle Linux boxes. My one SUSE box is the server itself. Sorry I can't be more helpful. --------------- Len Ewen Systems Administrator 1 Information Technology University of Indianapolis (317) 788-3362 [image: UIndyIT.jpg] Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal. On Tue, Sep 15, 2020 at 8:42 AM Haupt, Torsten < Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote:

Okay, this decribes the upgrade from SLES12 to SLES15SP2. It’s the same for openSUSE Leap clients? To update vom 15.1 to 15.2?

That’s too much for a few clients. I will update the clients on the cli by changing the repos. This was my first plan, too. The orignal question was, how to change the base channel in the gui. I have no option to select the base channel for Leap 15.2. So I have to re-register them with a new activation key.

Torsten

*From:* Len Ewen [mailto:ewenf@uindy.edu] *Sent:* Tuesday, September 15, 2020 2:10 PM *To:* uyuni-users@opensuse.org *Subject:* [EXTERN] Re: [EXTERN] Re: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

https://www.uyuni-project.org/uyuni-docs/uyuni/upgrade/client-x.html

---------------

*Len Ewen*

Systems Administrator 1

Information Technology

University of Indianapolis

(317) 788-3362

[image: UIndyIT.jpg]

*Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal.*

On Tue, Sep 15, 2020 at 8:04 AM Haupt, Torsten < Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote:

No, stop. I wrote, that I want to update a client not the Uyuni server. The uyuni server ist already updated to openSUSE Leap 15.2, according to the published documentations.

Now I want to update some registered clients.

Torsten

*From:* Len Ewen [mailto:ewenf@uindy.edu] *Sent:* Tuesday, September 15, 2020 2:00 PM *To:* uyuni-users@opensuse.org *Subject:* [EXTERN] Re: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

I don't think upgrading the server will cause any issues with your registered clients. You upgrade the server, then you upgrade Uyuni to 2020.07, which has a set of instructions unto itself, and then you should be good to go.

https://www.uyuni-project.org/uyuni-docs/uyuni/upgrade/upgrade-overview.html

---------------

*Len Ewen*

Systems Administrator 1

Information Technology

University of Indianapolis

(317) 788-3362

[image: Das Bild wurde vom Absender entfernt. UIndyIT.jpg]

*Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal.*

On Tue, Sep 15, 2020 at 7:46 AM Haupt, Torsten < Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote:

Hi,

okay, no problem to update the server through the cli on the server. But at the end I have to change the base channel in Uyuni … and I can’t.

Or must I re-register the server after the update?

But at the moment all repos point to the uyuni server. So I have to disable them and reactivate the original repos, which point to the internet?

Torsten

*From:* Len Ewen [mailto:ewenf@uindy.edu] *Sent:* Tuesday, September 15, 2020 12:46 PM *To:* uyuni-users@opensuse.org *Subject:* [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

SInce it is a service pack, you may not be able to do it through Uyuni. You might be able to script it, but here is the guide I used.

https://www.cyberciti.biz/faq/how-to-upgrade-opensuse-15-1-to-15-2-using-the...

---------------

*Len Ewen*

Systems Administrator 1

Information Technology

University of Indianapolis

(317) 788-3362

[image: Das Bild wurde vom Absender entfernt. UIndyIT.jpg]

*Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal.*

On Tue, Sep 15, 2020 at 5:07 AM Haupt, Torsten < Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote:

Hi,

no, both are x86_64. And both channels were created as SUSE product; not through spacewalk-common-channels.

Torsten

...
-----Original Message----- From: Robert Paschedag [mailto:robert.paschedag@web.de] Sent: Tuesday, September 15, 2020 10:47 AM To: Haupt, Torsten Cc: javier.flores@gmz.migros.ch; uyuni-users@opensuse.org Subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Not sure, but maybe the leap15.2 channel is another architecture than the leap15.1 channel your system is currently using.

Robert

⁣sent from my mobile device

-------- Originale Nachricht -------- Von: "Haupt, Torsten" Gesendet: Tue Sep 15 09:01:39 GMT+02:00 2020 An: "Flores, Javier-GMZ" Cc: "uyuni-users@opensuse.org" Betreff: [uyuni-users] RE: Upgrade openSUSE Leap

Hi,

I tried it, but in the GUI I can't change the base channel to openSUSE Leap 15.2. In the dialog under SUSE-channels openSUSE Leap 15.1 is activated and under custom channels I see CentOS. I can't choose other base channels. And yes, there is an openSUSE 15.2 channel, created in the GUI, under admin | products. This channel is also synchronized. But I can't choose it as new base channel for the system.

Torsten

...
-----Original Message----- From: Flores, Javier-GMZ [mailto:Javier.Flores@gmz.migros.ch] Sent: Tuesday, September 15, 2020 8:33 AM To: Haupt, Torsten Subject: [EXTERN] AW: Upgrade openSUSE Leap

Hi

I usually first update to the latest packages of the current release, then attach the channels of the new release and simply run "zypper dist-upgrade" on the client.

Regards, Javier

-----Ursprüngliche Nachricht----- Von: Haupt, Torsten Gesendet: Tuesday, September 15, 2020 7:00 AM An: uyuni-users@opensuse.org Betreff: [uyuni-users] Upgrade openSUSE Leap

Hi,

what is the right way to upgrade openSUSE Leap 15.1 to 15.2 using Uyuni? I mean a client, not the Uyuni server.

Torsten -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org

Reply

Sign in to reply online Use email software

Bidault, Philippe

13:12

New subject: [EXTERN] Re: [EXTERN] Re: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Hi Torsten, This is strange, if I click on “Alter Channel subscription” of any registered system, I have then a screen split in 2 columns, the left one being to change the Base channel: Base Channel You can change the base software channel your system is subscribed to. The system will be unsubscribed from all software channels, and subscribed to the new base software channel. (none, disable service) Custom Channels CentOS 7 (x86_64) CentOS 8 (x86_64) openSUSE Leap 15.2 (x86_64) And the right one for the Childs Channel: Child Channels This system is subscribed to the checked channels beneath, if any. Disabled checkboxes indicate channels that can't be manually subscribed or unsubscribed from. openSUSE Leap 15.2 (x86_64) openSUSE 15.2 non oss (x86_64) openSUSE Leap 15.2 non oss Updates (x86_64) openSUSE Leap 15.2 Updates (x86_64) Uyuni Client Tools for openSUSE Leap 15.2 (x86_64) Uyuni Proxy Stable for openSUSE Leap 15.2 (x86_64) Don’t you have that ? Regards, Philippe. Philippe Bidault | Unix Engineer Getronics ________________________________ M. 34617301667 | E. Philippe.Bidault@Getronics.com | W. www.getronics.com Getronics CMC Service Desk Iberia S.L - VAT No:S.L.: B66686262. Registered Office - Getronics CMC Service Desk Iberia S.L, C/Rosselloi, Porcel, 21 planta 11, 08016 Barcelona, Spain. The information transmitted is intended only for use by the addressee and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of it, or the taking of any action in reliance upon this information by persons and/or entities other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material. Thank you. Legal disclaimer: http://www.getronics.com/legal/ From: Len Ewen Sent: martes, 15 de septiembre de 2020 15:03 To: uyuni-users@opensuse.org Subject: Re: [EXTERN] Re: [EXTERN] Re: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. Out of my depth now. I've got Centos and Oracle Linux boxes. My one SUSE box is the server itself. Sorry I can't be more helpful. --------------- Len Ewen Systems Administrator 1 Information Technology University of Indianapolis (317) 788-3362 [https://lh5.googleusercontent.com/wC2P6aWpyu4yByp5rWy6qbIwEjfThJc30IYiQrUICZ...] Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal. On Tue, Sep 15, 2020 at 8:42 AM Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote: Okay, this decribes the upgrade from SLES12 to SLES15SP2. It’s the same for openSUSE Leap clients? To update vom 15.1 to 15.2? That’s too much for a few clients. I will update the clients on the cli by changing the repos. This was my first plan, too. The orignal question was, how to change the base channel in the gui. I have no option to select the base channel for Leap 15.2. So I have to re-register them with a new activation key. Torsten From: Len Ewen [mailto:ewenf@uindy.edumailto:ewenf@uindy.edu] Sent: Tuesday, September 15, 2020 2:10 PM To: uyuni-users@opensuse.orgmailto:uyuni-users@opensuse.org Subject: [EXTERN] Re: [EXTERN] Re: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap https://www.uyuni-project.org/uyuni-docs/uyuni/upgrade/client-x.html --------------- Len Ewen Systems Administrator 1 Information Technology University of Indianapolis (317) 788-3362 [UIndyIT.jpg] Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal. On Tue, Sep 15, 2020 at 8:04 AM Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote: No, stop. I wrote, that I want to update a client not the Uyuni server. The uyuni server ist already updated to openSUSE Leap 15.2, according to the published documentations. Now I want to update some registered clients. Torsten From: Len Ewen [mailto:ewenf@uindy.edumailto:ewenf@uindy.edu] Sent: Tuesday, September 15, 2020 2:00 PM To: uyuni-users@opensuse.orgmailto:uyuni-users@opensuse.org Subject: [EXTERN] Re: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap I don't think upgrading the server will cause any issues with your registered clients. You upgrade the server, then you upgrade Uyuni to 2020.07, which has a set of instructions unto itself, and then you should be good to go. https://www.uyuni-project.org/uyuni-docs/uyuni/upgrade/upgrade-overview.html --------------- Len Ewen Systems Administrator 1 Information Technology University of Indianapolis (317) 788-3362 [Das Bild wurde vom Absender entfernt. UIndyIT.jpg] Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal. On Tue, Sep 15, 2020 at 7:46 AM Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote: Hi, okay, no problem to update the server through the cli on the server. But at the end I have to change the base channel in Uyuni … and I can’t. Or must I re-register the server after the update? But at the moment all repos point to the uyuni server. So I have to disable them and reactivate the original repos, which point to the internet? Torsten From: Len Ewen [mailto:ewenf@uindy.edumailto:ewenf@uindy.edu] Sent: Tuesday, September 15, 2020 12:46 PM To: uyuni-users@opensuse.orgmailto:uyuni-users@opensuse.org Subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap SInce it is a service pack, you may not be able to do it through Uyuni. You might be able to script it, but here is the guide I used. https://www.cyberciti.biz/faq/how-to-upgrade-opensuse-15-1-to-15-2-using-the... --------------- Len Ewen Systems Administrator 1 Information Technology University of Indianapolis (317) 788-3362 [Das Bild wurde vom Absender entfernt. UIndyIT.jpg] Confidentiality Notice: This communication and/or its content are for the sole use of the intended recipient, and may be privileged, confidential, or otherwise protected from disclosure by law. If you are not the intended recipient, please notify the sender and then delete all copies of it. Unless you are the intended recipient, your use or dissemination of the information contained in this communication may be illegal. On Tue, Sep 15, 2020 at 5:07 AM Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> wrote: Hi, no, both are x86_64. And both channels were created as SUSE product; not through spacewalk-common-channels. Torsten

-----Original Message----- From: Robert Paschedag [mailto:robert.paschedag@web.demailto:robert.paschedag@web.de] Sent: Tuesday, September 15, 2020 10:47 AM To: Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> Cc: javier.flores@gmz.migros.chmailto:javier.flores@gmz.migros.ch; uyuni-users@opensuse.orgmailto:uyuni-users@opensuse.org Subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Not sure, but maybe the leap15.2 channel is another architecture than the leap15.1 channel your system is currently using.

Robert

⁣sent from my mobile device

-------- Originale Nachricht -------- Von: "Haupt, Torsten" mailto:torsten.haupt@lhw.mlu.sachsen-anhalt.de> Gesendet: Tue Sep 15 09:01:39 GMT+02:00 2020 An: "Flores, Javier-GMZ" mailto:javier.flores@gmz.migros.ch> Cc: "uyuni-users@opensuse.orgmailto:uyuni-users@opensuse.org" mailto:uyuni-users@opensuse.org> Betreff: [uyuni-users] RE: Upgrade openSUSE Leap

Hi,

I tried it, but in the GUI I can't change the base channel to openSUSE Leap 15.2. In the dialog under SUSE-channels openSUSE Leap 15.1 is activated and under custom channels I see CentOS. I can't choose other base channels. And yes, there is an openSUSE 15.2 channel, created in the GUI, under admin | products. This channel is also synchronized. But I can't choose it as new base channel for the system.

Torsten

...
-----Original Message----- From: Flores, Javier-GMZ [mailto:Javier.Flores@gmz.migros.chmailto:Javier.Flores@gmz.migros.ch] Sent: Tuesday, September 15, 2020 8:33 AM To: Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> Subject: [EXTERN] AW: Upgrade openSUSE Leap

Hi

I usually first update to the latest packages of the current release, then attach the channels of the new release and simply run "zypper dist-upgrade" on the client.

Regards, Javier

-----Ursprüngliche Nachricht----- Von: Haupt, Torsten mailto:Torsten.Haupt@lhw.mlu.sachsen-anhalt.de> Gesendet: Tuesday, September 15, 2020 7:00 AM An: uyuni-users@opensuse.orgmailto:uyuni-users@opensuse.org Betreff: [uyuni-users] Upgrade openSUSE Leap

Hi,

what is the right way to upgrade openSUSE Leap 15.1 to 15.2 using Uyuni? I mean a client, not the Uyuni server.

Torsten -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.orgmailto:uyuni-users%2Bunsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.orgmailto:uyuni-users%2Bowner@opensuse.org -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.orgmailto:uyuni-users%2Bunsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.orgmailto:uyuni-users%2Bowner@opensuse.org

[cid:M17520GetronicsConnectingPossibilitiesE-Sig425x204_e1803ca0-99a5-4a65-abd8-074c86bf11aa.png]http://www.getronics.com/ http://www.linkedin.com/company/2077785[cid:LinkedIn_4aeb630a-f385-4f22-927e-31323d2554b8.png]https://www.linkedin.com/company/2077785 [cid:Twitter_6c9cce61-b2e3-49d4-991c-e799d031f1ae.png] https://twitter.com/Getronics http://twitter.com/Getronics [cid:Youtube_5150f807-4ba8-46a3-bbbf-038ccfdc2793.png] https://www.youtube.com/user/getronicsonline?feature=results_main http://www.youtube.com/user/getronicsonline?feature=results_main sign-info http://www.getronics.com/knowledge-share/news-and-events/ovum.php#sthash.cbK...

Reply

Sign in to reply online Use email software

Julio González Gil

14:23

On martes, 15 de septiembre de 2020 11:07:48 (CEST) Haupt, Torsten wrote:

Hi,

no, both are x86_64. And both channels were created as SUSE product; not through spacewalk-common-channels.

I think that's the problem. I am adding Michael Calmer so he can clarify (for some reason I thought he already wrote at this thread, maybe it was at an issue at GitHub). If you are using openSUSE as a SUSE Product, then is that (at least for now) a limitation on SCC, as (IIRC) there is not migration path right now. Maybe Michael can clarify better.

Torsten

...
-----Original Message----- From: Robert Paschedag [mailto:robert.paschedag@web.de] Sent: Tuesday, September 15, 2020 10:47 AM To: Haupt, Torsten Cc: javier.flores@gmz.migros.ch; uyuni-users@opensuse.org Subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Not sure, but maybe the leap15.2 channel is another architecture than the leap15.1 channel your system is currently using.

Robert

⁣sent from my mobile device

-------- Originale Nachricht -------- Von: "Haupt, Torsten" Gesendet: Tue Sep 15 09:01:39 GMT+02:00 2020 An: "Flores, Javier-GMZ" Cc: "uyuni-users@opensuse.org" Betreff: [uyuni-users] RE: Upgrade openSUSE Leap

Hi,

I tried it, but in the GUI I can't change the base channel to openSUSE Leap 15.2. In the dialog under SUSE-channels openSUSE Leap 15.1 is activated and under custom channels I see CentOS. I can't choose other base channels. And yes, there is an openSUSE 15.2 channel, created in the GUI, under admin | products. This channel is also synchronized. But I can't choose it as new base channel for the system.

Torsten

...
-----Original Message----- From: Flores, Javier-GMZ [mailto:Javier.Flores@gmz.migros.ch] Sent: Tuesday, September 15, 2020 8:33 AM To: Haupt, Torsten Subject: [EXTERN] AW: Upgrade openSUSE Leap

Hi

I usually first update to the latest packages of the current release, then attach the channels of the new release and simply run "zypper dist-upgrade" on the client.

Regards, Javier

-----Ursprüngliche Nachricht----- Von: Haupt, Torsten Gesendet: Tuesday, September 15, 2020 7:00 AM An: uyuni-users@opensuse.org Betreff: [uyuni-users] Upgrade openSUSE Leap

Hi,

what is the right way to upgrade openSUSE Leap 15.1 to 15.2 using Uyuni? I mean a client, not the Uyuni server.

Torsten -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org

-- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org

�{.n�+��+��Ϯ�˛��m�)z{.��+�:�{Zr�az�'z��j)n��ǫ��0��Ǩ�

-- Julio González Gil Release Engineer, SUSE Manager and Uyuni jgonzalez@suse.com

Reply

Sign in to reply online Use email software

Haupt, Torsten

14:36

New subject: AW: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Hi, okay, maybe that's the error. What's the best way to integrate openSUSE Leap ... as SUSE product or as common channel? What's the difference? Torsten ________________________________________ Von: Julio González Gil Gesendet: Dienstag, 15. September 2020 16:23 An: Robert Paschedag; uyuni-users@opensuse.org Cc: uyuni-users@opensuse.org; Haupt, Torsten; Michael Calmer Betreff: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap On martes, 15 de septiembre de 2020 11:07:48 (CEST) Haupt, Torsten wrote:

Hi,

no, both are x86_64. And both channels were created as SUSE product; not through spacewalk-common-channels.

I think that's the problem. I am adding Michael Calmer so he can clarify (for some reason I thought he already wrote at this thread, maybe it was at an issue at GitHub). If you are using openSUSE as a SUSE Product, then is that (at least for now) a limitation on SCC, as (IIRC) there is not migration path right now. Maybe Michael can clarify better.

Torsten

...
-----Original Message----- From: Robert Paschedag [mailto:robert.paschedag@web.de] Sent: Tuesday, September 15, 2020 10:47 AM To: Haupt, Torsten Cc: javier.flores@gmz.migros.ch; uyuni-users@opensuse.org Subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Not sure, but maybe the leap15.2 channel is another architecture than the leap15.1 channel your system is currently using.

Robert

⁣sent from my mobile device

-------- Originale Nachricht -------- Von: "Haupt, Torsten" Gesendet: Tue Sep 15 09:01:39 GMT+02:00 2020 An: "Flores, Javier-GMZ" Cc: "uyuni-users@opensuse.org" Betreff: [uyuni-users] RE: Upgrade openSUSE Leap

Hi,

I tried it, but in the GUI I can't change the base channel to openSUSE Leap 15.2. In the dialog under SUSE-channels openSUSE Leap 15.1 is activated and under custom channels I see CentOS. I can't choose other base channels. And yes, there is an openSUSE 15.2 channel, created in the GUI, under admin | products. This channel is also synchronized. But I can't choose it as new base channel for the system.

Torsten

...
-----Original Message----- From: Flores, Javier-GMZ [mailto:Javier.Flores@gmz.migros.ch] Sent: Tuesday, September 15, 2020 8:33 AM To: Haupt, Torsten Subject: [EXTERN] AW: Upgrade openSUSE Leap

Hi

I usually first update to the latest packages of the current release, then attach the channels of the new release and simply run "zypper dist-upgrade" on the client.

Regards, Javier

-----Ursprüngliche Nachricht----- Von: Haupt, Torsten Gesendet: Tuesday, September 15, 2020 7:00 AM An: uyuni-users@opensuse.org Betreff: [uyuni-users] Upgrade openSUSE Leap

Hi,

what is the right way to upgrade openSUSE Leap 15.1 to 15.2 using Uyuni? I mean a client, not the Uyuni server.

Torsten -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org

-- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org

�{.n�+��+��Ϯ�˛��m�)z{.��+�:�{Zr�az�'z��j)n��ǫ��0��Ǩ�

-- Julio González Gil Release Engineer, SUSE Manager and Uyuni jgonzalez@suse.com

Reply

Sign in to reply online Use email software

Michael Calmer

15:25

Hi Am Dienstag, 15. September 2020, 16:23:45 CEST schrieb Julio González Gil:

On martes, 15 de septiembre de 2020 11:07:48 (CEST) Haupt, Torsten wrote:

...
Hi,

no, both are x86_64. And both channels were created as SUSE product; not through spacewalk-common-channels.

I think that's the problem. I am adding Michael Calmer so he can clarify (for some reason I thought he already wrote at this thread, maybe it was at an issue at GitHub).

If you are using openSUSE as a SUSE Product, then is that (at least for now) a limitation on SCC, as (IIRC) there is not migration path right now.

Maybe Michael can clarify better.

Yes, SCC defines the update path from Leap to SLES as this was the product requirement for SLES. Now with Uyuni we have also the requirement to provide the upgrade path from Leap n to Leap n+1 .

...
Torsten

...
-----Original Message----- From: Robert Paschedag [mailto:robert.paschedag@web.de] Sent: Tuesday, September 15, 2020 10:47 AM To: Haupt, Torsten Cc: javier.flores@gmz.migros.ch; uyuni-users@opensuse.org Subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Not sure, but maybe the leap15.2 channel is another architecture than the leap15.1 channel your system is currently using.

Robert

⁣sent from my mobile device

-------- Originale Nachricht -------- Von: "Haupt, Torsten" Gesendet: Tue Sep 15 09:01:39 GMT+02:00 2020 An: "Flores, Javier-GMZ" Cc: "uyuni-users@opensuse.org" Betreff: [uyuni-users] RE: Upgrade openSUSE Leap

Hi,

I tried it, but in the GUI I can't change the base channel to openSUSE Leap 15.2. In the dialog under SUSE-channels openSUSE Leap 15.1 is activated and under custom channels I see CentOS. I can't choose other base channels. And yes, there is an openSUSE 15.2 channel, created in the GUI, under admin | products. This channel is also synchronized. But I can't choose it as new base channel for the system.

Torsten

...
-----Original Message----- From: Flores, Javier-GMZ [mailto:Javier.Flores@gmz.migros.ch] Sent: Tuesday, September 15, 2020 8:33 AM To: Haupt, Torsten Subject: [EXTERN] AW: Upgrade openSUSE Leap

Hi

I usually first update to the latest packages of the current release, then attach the channels of the new release and simply run "zypper dist-upgrade" on the client.

Regards, Javier

-----Ursprüngliche Nachricht----- Von: Haupt, Torsten Gesendet: Tuesday, September 15, 2020 7:00 AM An: uyuni-users@opensuse.org Betreff: [uyuni-users] Upgrade openSUSE Leap

Hi,

what is the right way to upgrade openSUSE Leap 15.1 to 15.2 using Uyuni? I mean a client, not the Uyuni server.

Torsten -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org

-- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org

�{.n�+��+��Ϯ�˛��m�)z{.��+�:�{Zr�az�'z��j)n��ǫ��0��Ǩ�

-- Regards Michael Calmer -------------------------------------------------------------------------- Michael Calmer SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, D-90409 Nuernberg T: +49 (0) 911 74053 0 F: +49 (0) 911 74053575 - e-mail: Michael.Calmer@suse.com -------------------------------------------------------------------------- SUSE Software Solutions Germany GmbH, GF: Felix Imendörffer (HRB 36809, AG Nürnberg) -- To unsubscribe, e-mail: uyuni-users+unsubscribe@opensuse.org To contact the owner, e-mail: uyuni-users+owner@opensuse.org

Reply

Sign in to reply online Use email software

Haupt, Torsten

16 Sep 16 Sep

05:12

New subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Hi,

-----Original Message----- From: Michael Calmer [mailto:mc@suse.de] Sent: Tuesday, September 15, 2020 5:25 PM To: Julio González Gil Cc: Robert Paschedag ; uyuni- users@opensuse.org; Haupt, Torsten Subject: [EXTERN] Re: [uyuni-users] RE: Upgrade openSUSE Leap

Hi

Am Dienstag, 15. September 2020, 16:23:45 CEST schrieb Julio González Gil:

...
On martes, 15 de septiembre de 2020 11:07:48 (CEST) Haupt, Torsten wrote:

...
Hi,

no, both are x86_64. And both channels were created as SUSE product; not through spacewalk-common-channels.

I think that's the problem. I am adding Michael Calmer so he can clarify (for some reason I thought he already wrote at this thread, maybe it was at an issue at GitHub).

If you are using openSUSE as a SUSE Product, then is that (at least for now) a limitation on SCC, as (IIRC) there is not migration path right now.

Maybe Michael can clarify better.

Yes, SCC defines the update path from Leap to SLES as this was the product requirement for SLES. Now with Uyuni we have also the requirement to provide the upgrade path from Leap n to Leap n+1 .

So, I think, using common-channels is more flexible and I'm independant from SCC. I will change the base channels for my openSUSE Leap machines. For my SLES machines I still have to use SCC. Torsten

Reply

Sign in to reply online Use email software

1311

Age (days ago)

1312

Last active (days ago)

Download

14 comments

6 participants

tags

participants (6)

Bidault, Philippe
Haupt, Torsten
Julio González Gil
Len Ewen
Michael Calmer
Robert Paschedag