Uyuni 2022.06 is released!
VERY IMPORTANT: Uyuni 2022.06 switches the base OS for the Server and the Proxy to openSUSE Leap 15.4. Make sure you read the release notes before updating! We are happy to announce the immediate availability of Uyuni 2022.06. At https://www.uyuni-project.org/pages/stable-version.html you will find all the resources you need to start working with Uyuni 2022.06, including the release notes, documentation, requirements and setup instructions. This is the list of highlights for this release: - Upgrade notes (read them carefully!) - Base system upgrade to openSUSE Leap 15.4 - PostgreSQL 14 - Salt 3004 - New products enabled Remember that Uyuni will follow a rolling release planning, so the next version will contain bugfixes for this one and any new features. There will be no maintenance of 2022.06 As always, we hope you will enjoy Uyuni 2022.06 and we invite everyone of you to send us your feedback [1] and of course your patches, if you can contribute. Happy hacking! [1] https://www.uyuni-project.org/pages/contact.html -- Julio González Gil Release Engineer, SUSE Manager and Uyuni jgonzalez@suse.com
Good work, everybody. I'm aiming to perform this upgrade later in the week.
But I'm a little confused by the wording on the Release notes;
"WARNING: This release updates the base OS from openSUSE Leap 15.3 to openSUSE Leap 15.4 and there are special steps required. You need at least Uyuni 2021.06 already installed to perform the upgrade, and you need to follow the major upgrade procedure for the Server."
Shouldn't this read " at least Uyuni 2021.05"? (As in, I can't be /at/ 06 to upgrade /to/ 06)
Or should I follow the minor update procedure to go from 05 to 06 before doing the major update procedure?
Thanks,
Simon
-----Original Message-----
From: Julio Gonzalez via Uyuni Users
On lunes, 27 de junio de 2022 15:02:48 (CEST) Simon Avery wrote:
Good work, everybody. I'm aiming to perform this upgrade later in the week.
But I'm a little confused by the wording on the Release notes;
"WARNING: This release updates the base OS from openSUSE Leap 15.3 to openSUSE Leap 15.4 and there are special steps required. You need at least Uyuni 2021.06 already installed to perform the upgrade, and you need to follow the major upgrade procedure for the Server."
Shouldn't this read " at least Uyuni 2021.05"? (As in, I can't be /at/ 06 to upgrade /to/ 06)
No, at least 2021.06 is out. Do not confuse it with 2022.05 or 2022.06 :-) Uyuni 2021.06 was the first version that required openSUSE Leap 15.3 as base OS, so you need to be at least at 2021.06 to be able to update to 2022.06 with a major upgrade procedure Needless to say, you should not leave Uyuni without updates for a year, so ideally everyone should be already on 2022.05 or, at least, something newer than 2021.06 :-) If someone is on 2021.05 or earlier, updating could work, but it's not supported. Hope it helps.
Or should I follow the minor update procedure to go from 05 to 06 before doing the major update procedure?
Thanks,
Simon
-----Original Message----- From: Julio Gonzalez via Uyuni Users
Sent: 27 June 2022 08:59 To: announce@lists.uyuni-project.org; users@lists.uyuni-project.org; devel@lists.uyuni-project.org Cc: Julio Gonzalez Subject: [EXTERNAL EMAIL] Uyuni 2022.06 is released! VERY IMPORTANT: Uyuni 2022.06 switches the base OS for the Server and the Proxy to openSUSE Leap 15.4. Make sure you read the release notes before updating!
We are happy to announce the immediate availability of Uyuni 2022.06.
At https://www.uyuni-project.org/pages/stable-version.html you will find all the resources you need to start working with Uyuni 2022.06, including the release notes, documentation, requirements and setup instructions.
This is the list of highlights for this release:
- Upgrade notes (read them carefully!) - Base system upgrade to openSUSE Leap 15.4 - PostgreSQL 14 - Salt 3004 - New products enabled
Remember that Uyuni will follow a rolling release planning, so the next version will contain bugfixes for this one and any new features. There will be no maintenance of 2022.06
As always, we hope you will enjoy Uyuni 2022.06 and we invite everyone of you to send us your feedback [1] and of course your patches, if you can contribute.
Happy hacking!
[1] https://www.uyuni-project.org/pages/contact.html
-- Julio González Gil Release Engineer, SUSE Manager and Uyuni jgonzalez@suse.com
-- Julio González Gil Release Engineer, SUSE Manager and Uyuni jgonzalez@suse.com
But I'm a little confused by the wording on the Release notes;
"WARNING: This release updates the base OS from openSUSE Leap 15.3 to openSUSE Leap 15.4 and there are special steps required. You need at least Uyuni 2021.06 already installed to perform the upgrade, and you need to follow the major upgrade procedure for the Server."
Shouldn't this read " at least Uyuni 2021.05"? (As in, I can't be /at/ 06 to upgrade /to/ 06)
No, at least 2021.06 is out. Do not confuse it with 2022.05 or 2022.06 :-)
Aha! That does clear up my confusion - thank you! S
Hi Julio,
Thanks for this ! Uyuni server upgraded, so far so good.
However, I am still confused with the Proxy upgrade procedure (https://www.uyuni-project.org/uyuni-docs/en/uyuni/installation-and-upgrade/p...):
"In the Uyuni Server Web UI, navigate to proxy system's details page, click the Reactivation subtab.
Click Generate New Key to generate a reactivation key."
Is this really necessary ? I understand that we don't need to re-register the proxy. Just selecting the 15.4 repos and executing on the proxy 'zypper dup --allow-vendor-change' is enough, correct ?
Regards,
Philippe.
Philippe Bidault | Unix Engineer | Getronics
M. 34617301667 | E. Philippe.Bidault@Getronics.com | W. www.getronics.com
Getronics CMC Service Desk Iberia S.L - VAT No:S.L.: B66686262.
Registered Office - Getronics CMC Service Desk Iberia S.L, C/Rosselloi, Porcel, 21 planta 11, 08016 Barcelona, Spain.
The information transmitted is intended only for use by the addressee and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of it, or the taking of any action in reliance upon this information by persons and/or entities other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material. Thank you.
Legal disclaimer: www.getronics.com/legal and further details of how we treat your personal data can be found in our privacy policy
I can't tell for sure. @Michele? If it's not needed, then we should remove it from the doc. On lunes, 27 de junio de 2022 16:13:08 (CEST) Bidault, Philippe wrote:
Hi Julio,
Thanks for this ! Uyuni server upgraded, so far so good.
However, I am still confused with the Proxy upgrade procedure (https://www.uyuni-project.org/uyuni-docs/en/uyuni/installation-and-upgrade /proxy-uyuni.html):
"In the Uyuni Server Web UI, navigate to proxy system's details page, click the Reactivation subtab. Click Generate New Key to generate a reactivation key."
Is this really necessary ? I understand that we don't need to re-register the proxy. Just selecting the 15.4 repos and executing on the proxy 'zypper dup --allow-vendor-change' is enough, correct ?
Regards, Philippe.
Philippe Bidault | Unix Engineer | Getronics
M. 34617301667 | E. Philippe.Bidault@Getronics.com | W. www.getronics.com
Getronics CMC Service Desk Iberia S.L - VAT No:S.L.: B66686262. Registered Office - Getronics CMC Service Desk Iberia S.L, C/Rosselloi, Porcel, 21 planta 11, 08016 Barcelona, Spain.
The information transmitted is intended only for use by the addressee and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of it, or the taking of any action in reliance upon this information by persons and/or entities other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material. Thank you.
Legal disclaimer: www.getronics.com/legal and further details of how we treat your personal data can be found in our privacy policy
-----Original Message----- From: Julio Gonzalez via Uyuni Users Sent: 27 June 2022 09:59 To: announce@lists.uyuni-project.org; users@lists.uyuni-project.org; devel@lists.uyuni-project.org Cc: Julio Gonzalez Subject: Uyuni 2022.06 is released! CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
-- Julio González Gil Release Engineer, SUSE Manager and Uyuni jgonzalez@suse.com
participants (3)
-
Bidault, Philippe
-
Julio Gonzalez
-
Simon Avery