Trying above update with the lokal installed oss-13.2-DVD image as only active repository. First try with "zypper -v dup" stop because of a full /var directory. created a /varnew double the size of /var, copied /var /varnew, edited /etc/fstab to point /var to the new partition and rebooted. Second try "zypper -v dup" results in the erro messages listed below. Can I retry and ignore the error? ( 311/2460) Installing: kernel-default-5.3.18-57.3.x86_64 ................[done] Additional rpm output: Creating initrd: /boot/initrd-5.3.18-57-default dracut: Executing: /usr/bin/dracut --logfile /var/log/YaST2/mkinitrd.log --force /boot/initrd-5.3.18-57-default 5.3.18-57-default dracut: Turning off host-only mode: '/sys' is not mounted! dracut: Turning off host-only mode: '/proc' is not mounted! dracut: Turning off host-only mode: '/run' is not mounted! dracut: Turning off host-only mode: '/dev' is not mounted! dracut: dracut module 'fcoe' will not be installed, because command 'dcbtool' could not be found! dracut: dracut module 'fcoe' will not be installed, because command 'fipvlan' could not be found! dracut: dracut module 'fcoe' will not be installed, because command 'lldpad' could not be found! dracut: dracut module 'fcoe' will not be installed, because command 'fcoemon' could not be found! dracut: dracut module 'fcoe' will not be installed, because command 'fcoeadm' could not be found! dracut: dracut module 'fcoe-uefi' will not be installed, because command 'dcbtool' could not be found! dracut: dracut module 'fcoe-uefi' will not be installed, because command 'fipvlan' could not be found! dracut: dracut module 'fcoe-uefi' will not be installed, because command 'lldpad' could not be found! dracut: dracut module 'nbd' will not be installed, because command 'nbd-client' could not be found! dracut: dracut module 'nvmf' will not be installed, because command 'nvme' could not be found! dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found! dracut: *** Including module: bash *** dracut: *** Including module: systemd *** dracut: *** Including module: systemd-initrd *** dracut: *** Including module: modsign *** dracut: *** Including module: rdma *** dracut: *** Including module: i18n *** dracut: *** Including module: network-legacy *** dracut: *** Including module: network *** dracut: *** Including module: drm *** dracut: *** Including module: plymouth *** dracut: *** Including module: btrfs *** dracut: *** Including module: crypt *** dracut: *** Including module: dm *** dracut: Skipping udev rule: 64-device-mapper.rules dracut: Skipping udev rule: 60-persistent-storage-dm.rules dracut: Skipping udev rule: 55-dm.rules dracut: *** Including module: dmraid *** dracut: *** Including module: kernel-modules *** dracut: *** Including module: kernel-modules-extra *** dracut: *** Including module: kernel-network-modules *** dracut: *** Including module: lvm *** dracut: Skipping udev rule: 64-device-mapper.rules dracut: Skipping udev rule: 56-lvm.rules dracut: Skipping udev rule: 60-persistent-storage-lvm.rules dracut: *** Including module: mdraid *** dracut: Skipping udev rule: 64-md-raid.rules dracut: *** Including module: multipath *** dracut: Skipping udev rule: 40-multipath.rules dracut: *** Including module: nvdimm *** dracut: *** Including module: qemu *** dracut: *** Including module: qemu-net *** dracut: *** Including module: cifs *** dracut: *** Including module: iscsi *** dracut: *** Including module: lunmask *** dracut: *** Including module: nfs *** /usr/lib/dracut/modules.d/95nfs/module-setup.sh: line 39: findmnt: command not found /usr/lib/dracut/modules.d/95nfs/module-setup.sh: line 43: findmnt: command not found dracut: *** Including module: resume *** dracut: *** Including module: rootfs-block *** /usr/lib/dracut/dracut-functions.sh: line 314: findmnt: command not found /usr/lib/dracut/dracut-functions.sh: line 335: findmnt: command not found dracut: *** Including module: suse-btrfs *** dracut: *** Including module: suse-xfs *** dracut: *** Including module: terminfo *** dracut: *** Including module: udev-rules *** dracut: Skipping udev rule: 40-redhat.rules dracut: Skipping udev rule: 50-firmware.rules dracut: Skipping udev rule: 50-udev.rules dracut: Skipping udev rule: 91-permissions.rules dracut: Skipping udev rule: 80-drivers-modprobe.rules dracut: *** Including module: dracut-systemd *** dracut: *** Including module: haveged *** dracut: *** Including module: ostree *** dracut: *** Including module: usrmount *** dracut: *** Including module: base *** dracut: *** Including module: fs-lib *** dracut: *** Including module: shutdown *** dracut: *** Including module: suse *** dracut: *** Including module: suse-initrd *** dracut-install: ERROR: installing 'ecb' dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.szUR33/initramfs -N i2o_scsi --kerneldir /lib/modules/5.3.18-57-default/ -m ehci-hcd ehci-hcd crc32c des ecb md4 md5 hmac arc4 nls_utf8 cxgb4 dracut: *** Including modules done *** dracut: *** Installing kernel module dependencies *** dracut: *** Installing kernel module dependencies done *** dracut: *** Resolving executable dependencies *** dracut: *** Resolving executable dependencies done *** dracut: *** Hardlinking files *** dracut: *** Hardlinking files done *** dracut: *** Stripping files *** dracut: *** Stripping files done *** dracut: *** Generating early-microcode cpio image *** dracut: *** Constructing AuthenticAMD.bin *** dracut: *** Constructing GenuineIntel.bin *** dracut: *** Store current command line parameters *** dracut: Stored kernel commandline: dracut: rd.driver.pre=scsi_dh_alua rd.driver.pre=scsi_dh_emc rd.driver.pre=scsi_dh_rdac rd.driver.pre=dm_multipath dracut: *** Creating image file '/boot/initrd-5.3.18-57-default' *** ( 312/2460) Removing kernel-default-5.3.18-lp152.98.1.x86_64 ............[error] Removal of (4629)kernel-default-5.3.18-lp152.98.1.x86_64(@System) failed: Error: Subprocess failed. Error: RPM failed: /var/tmp/rpm-tmp.vkNMnT: line 1: /usr/lib/module-init-tools/kernel-scriptlets/rpm-preun: No such file or directory error: %preun(kernel-default-5.3.18-lp152.98.1.x86_64) scriptlet failed, exit status 127 error: kernel-default-5.3.18-lp152.98.1.x86_64: erase failed Abort, retry, ignore? [a/r/i] (a): a Warning: %posttrans scripts skipped while aborting: coreutils-8.32-1.2.x86_64.rpm rpm-4.14.1-29.46.x86_64.rpm ca-certificates-mozilla-2.44-9.6.1.noarch.rpm systemd-presets-common-SUSE-15-8.6.1.noarch.rpm login_defs-4.8.1-2.43.noarch.rpm systemd-presets-branding-openSUSE-12.2-lp153.2.37.noarch.rpm blog-2.20-2.1.x86_64.rpm shadow-4.8.1-2.43.x86_64.rpm dbus-1-1.12.2-8.3.1.x86_64.rpm kbd-2.0.4-14.38.x86_64.rpm util-linux-2.36.2-2.29.x86_64.rpm openSUSE-release-15.3-lp153.138.1.x86_64.rpm kmod-28-2.1.x86_64.rpm udev-246.13-5.1.x86_64.rpm dracut-049.1+suse.188.gbf445638-3.30.1.x86_64.rpm Problem occurred during or after installation or removal of packages: Installation has been aborted as directed. Please see the above error message for a hint.
participants (5)
-
Carlos E. R.
-
hermann-Josef Beckers
-
Masaru Nomiya
-
Per Jessen
-
野宮 賢 / NOMIYA Masaru